Honda ► CB550K ►
-
Here’s our hand-picked list of parts and accessories for your Honda CB550K with universal parts included►
- Honda
![Honda CB550K Passenger Rear Footrest Rubber Set](/images/parts/100/73-0184.jpg)
Passenger Rear Footrest Rubber Set
Passenger Rear Footrest Rubber Set/2, Replaces OEM # 50716-371-660
![Honda CB550K Passenger Rear Footrest Rubber Set](/images/parts/100/73-0185.jpg)
Passenger Rear Footrest Rubber Set
Passenger Rear Footrest Rubber Set/2, Replaces OEM # 95011-31000
![Honda CB550K Front Wheel Bearing Retainer Ring Tool](/images/parts/100/73-0186.jpg)
Front Wheel Bearing Retainer Ring Tool
Front Wheel Bearing Retainer Ring Tool. High quality tool for removing and fitting the front wheel bearing retainer ring with 1/2 inch socket bar wrench tool hole. The perfect tool for easier removal and fitting without damaging the special retainer ring.
![Honda CB550K Clutch Cable](/images/parts/100/73-0195.jpg)
Clutch Cable
Clutch Cable - OEM Ref # 22870-374-000 Made in Japan
![Honda CB550K CB550K 1974 Gas Tank Stripe Decals](/images/parts/100/73-0760.jpg)
CB550K 1974 Gas Tank Stripe Decals
Honda CB550K (1974) Gas Tank Stripe Decals (Stickers). Note: Set includes white, gold and black stripes only. Large black area must be painted as it was done by the manufacturer. The logos on the gas tank and side covers are cast emblems. Black area inside of stripes must be painted prior to application of stripes. These reproductions will add the finishing touch to your restoration. These decals are no longer available from the manufacturer. All decals are "printed" on the highest quality materials from companies such as 3M and Avery. All decals have a protective coating to resist scratching and to protect colors from UV rays. These decals are adhesive backed for simple application.
![Honda CB550K CB550K 1975-76 Gas Tank Stripe Decals](/images/parts/100/73-0761.jpg)
CB550K 1975-76 Gas Tank Stripe Decals
Honda CB550K (1975-76) Gas Tank Stripe Decals (Stickers). Note: Stripes must be carefully joined at one end. Large black area on the inside of stripes must be painted on prior to stripe application as done by the manufacturer. These reproductions will add the finishing touch to your restoration. These decals are no longer available from the manufacturer. All decals are "printed" on the highest quality materials from companies such as 3M and Avery. All decals have a protective coating to resist scratching and to protect colors from UV rays. These decals are adhesive backed for simple application.
![Honda CB550K CB550K 1977-78 Gas Tank Stripe Decals ~ Gold/Red Type](/images/parts/100/73-0764.jpg)
CB550K 1977-78 Gas Tank Stripe Decals ~ Gold/Red Type
Honda CB550K (1977-78) Gas Tank Stripe Decals (Stickers) for Gold/Red Stripe models. Note: Stripes are 2 pieces and must be carefully joined, as it was done by the manufacturer. These reproductions will add the finishing touch to your restoration. These decals are no longer available from the manufacturer. All decals are "printed" on the highest quality materials from companies such as 3M and Avery. All decals have a protective coating to resist scratching and to protect colors from UV rays. These decals are adhesive backed for simple application.
![Honda CB550K CB550K 1977-78 Side Cover Stripe Decals](/images/parts/100/73-0765.jpg)
CB550K 1977-78 Side Cover Stripe Decals
Honda CB550K (1977-78) Side Cover Stripe Decals (Stickers). Note: Stripes are 2 pieces and must be carefully joined, as it was done by the manufacturer. These reproductions will add the finishing touch to your restoration. These decals are no longer available from the manufacturer. All decals are "printed" on the highest quality materials from companies such as 3M and Avery. All decals have a protective coating to resist scratching and to protect colors from UV rays. These decals are adhesive backed for simple application.
![Honda CB550K CB550K 1977-78 Tire Info Decal](/images/parts/100/73-0766.jpg)
CB550K 1977-78 Tire Info Decal
Honda CB550K (1977-78) Tire Info Decal (Sticker). These reproductions will add the finishing touch to your restoration. These decals are no longer available from the manufacturer. All decals are "printed" on the highest quality materials from companies such as 3M and Avery. All decals have a protective coating to resist scratching and to protect colors from UV rays. These decals are adhesive backed for simple application.
![Honda CB550K CB550K 1977-78 Gas Tank Stripe Decals ~ Gold/Blue Type](/images/parts/100/73-0798.jpg)
CB550K 1977-78 Gas Tank Stripe Decals ~ Gold/Blue Type
Honda CB550K (1977-78) Gas Tank Stripe Decals (Stickers) for Gold/Blue Stripe models. Note: Stripes are 2 pieces and must be carefully joined, as it was done by the manufacturer. These reproductions will add the finishing touch to your restoration. These decals are no longer available from the manufacturer. All decals are "printed" on the highest quality materials from companies such as 3M and Avery. All decals have a protective coating to resist scratching and to protect colors from UV rays. These decals are adhesive backed for simple application.
![Honda CB550K Oil Pressure Switch](/images/parts/100/73-0825.jpg)
Oil Pressure Switch
Oil Pressure Switch, Replaces OEM # 37240-P13-013
![Honda CB550K Front Fork Top Bridge / Triple Tree Washer Kit](/images/parts/100/73-0833.jpg)
Front Fork Top Bridge / Triple Tree Washer Kit
Front Fork Top Bridge / Triple Tree Washer Kit of 2 Washers. These washers are needed in order to avoid broken top triple trees when you tighten up your fork tube clamps. Replace # OEM 53235-300-000
![Honda CB550K Rear Turn Signal Rubbers Pk/2](/images/parts/100/73-0834.jpg)
Rear Turn Signal Rubbers Pk/2
Rear Turn Signal Rubbers Pk/2, Replaces OEM # 33606-371-000 These are the Rubbers that Go Under the Rear Turn Signal Stays.
![Honda CB550K Turn Signal Pinch Bolt Set](/images/parts/100/73-0840.jpg)
Turn Signal Pinch Bolt Set
Turn Signal Pinch Bolt Set. Includes 2X Chrome Bolts, 2X Hex Nuts and 4X Flat Washers. This set is used to clamp the turn signal onto the stem. Some models originally had a 25mm long bolt but these will interchange. This set includes hardware for 2 turn signals. If you need enough for all 4 signals please purchase 2 sets.
![Honda CB550K Master Cylinder Damper Set](/images/parts/100/73-0841.jpg)
Master Cylinder Damper Set
Master Cylinder Damper Set. Includes Brake Master Cylinder Rubber Damper, Plate and Washer. This Set is often missing and is used to reduce vibration to the master cylinder lever.
![Honda CB550K Brake Rod Joint Pin w Cotter Pin](/images/parts/100/73-0844.jpg)
Brake Rod Joint Pin w Cotter Pin
Brake Rod Joint Pin with Cotter Pin, Replaces OEM # 95015-52000 (Joint Pin) and OEM # 94201-16250 (Cotter Pin).
![Honda CB550K Brake Rod Adjusting Nut](/images/parts/100/73-0845.jpg)
Brake Rod Adjusting Nut
Brake Rod Adjusting Nut, Replaces OEM # 95015-42000
![Honda CB550K Throttle Adjusting Bolt](/images/parts/100/73-0846.jpg)
Throttle Adjusting Bolt
Throttle Adjusting Bolt, Replaces OEM # 53190-300-000
![Honda CB550K Throttle Adjusting Spring](/images/parts/100/73-0847.jpg)
Throttle Adjusting Spring
Throttle Adjusting Spring, Replaces OEM # 53191-300-000
![Honda CB550K Valve Stem Seal](/images/parts/100/73-0871.jpg)
Valve Stem Seal
Valve Stem Seal. Replaces OEM # 12209-333-005 / 12209-333-005 Sold Each - Order the Quantity you Require
![Honda CB550K Bronze Thrust Bushing Set/2](/images/parts/100/73-0883.jpg)
Bronze Thrust Bushing Set/2
Bronze Thrust Bushing Set/2. Replace the cheaply made, worn-out factory swingarm bushings with a 2-piece set of brand-new bronze thrust bushings. Replaces OEM # 52109-283-300
![Honda CB550K Tach Drive Plug Block Off w O-Ring](/images/parts/100/73-0884.jpg)
Tach Drive Plug Block Off w O-Ring
Tach Drive Plug (Block Off) with O-ring. This plug is generally used when the tachometer cable drive is removed and still needs to be blocked off to prevent oil leakage. This plug has an o-ring groove machined in it for better sealing. Several bike builders just cut the stock cable off and left the Honda cable drive end installed in the valve cover. This plug is a much cleaner option in both functionality and looks. These plugs are a real nice touch when you are not using the stock tachometer, and need to eliminate the cable, or are using an electronic tach. Installs in about a minute, no need to remove the valve cover to remove the tach drive gear assy. Fits tachometer cables that are approximately 15mm in diameter with a 10.5mm groove and held in place with a screw.
![Honda CB550K Carb Float Setting Tool](/images/parts/100/73-0888.jpg)
Carb Float Setting Tool
Carb Float Setting Tool. Use this tool to help set your floats with ease! This pre-set float setting gauge is for the models/years below only. Fits: Honda CB500K (1971-73), CB550K (1974-76), CB550F (1975-77) Supersport
![Honda CB550K Center Stand Spring Plate](/images/parts/100/73-0890.jpg)
Center Stand Spring Plate
Center Stand Spring Plate, This is the Plate the Center Stand Spring Attaches to. Replaces OEM # 50523-300-010
![Honda CB550K Side Stand Pivot Bolt & Nut Set](/images/parts/100/73-0893.jpg)
Side Stand Pivot Bolt & Nut Set
Side Stand Pivot Bolt & Nut Set, This is the Set Used to Fasten the Side Stand in Place. Replaces OEM # 90108-283-000 (Bolt) and 94002-10000-0S (Nut).
![Honda CB550K Rear Brake Shoe Spring Set/2](/images/parts/100/73-0895.jpg)
Rear Brake Shoe Spring Set/2
Rear Brake Shoe Spring Set of 2. Replaces OEM # 43151-346-000
![Honda CB550K Clutch Spring Bolt Set](/images/parts/100/73-0902.jpg)
Clutch Spring Bolt Set
Clutch Spring Bolt Set of 4. Replaces OEM # 92101-06022-0A X4
![Honda CB550K Brake Disc Retaining Nut Pk/10](/images/parts/100/73-0937.jpg)
Brake Disc Retaining Nut Pk/10
Brake Disc Retaining Nut Pk/10, Replaces OEM # 90309-357-000
![Honda CB550K Brake Cam Dust Seal](/images/parts/100/73-0938.jpg)
Brake Cam Dust Seal
Brake Cam Dust Seal, Replaces OEM # 43134-300-000
![Honda CB550K Fork Seal Stopper Metal Ring Pk/2](/images/parts/100/73-0940.jpg)
Fork Seal Stopper Metal Ring Pk/2
Fork Seal Stopper Metal Ring Pk/2, Replaces OEM # 51447-KL4-951 This is the Metal Ring above the Fork Seal.
![Honda CB550K Grease Fitting Nipple (Pk/2)](/images/parts/100/73-0941.jpg)
Grease Fitting Nipple (Pk/2)
Grease Fitting Nipple A .45 (Pk/2). Replaces OEM # 96201-30001
![Honda CB550K Passenger Rear Footpeg Pin & Cotter Pin Set](/images/parts/100/73-0945.jpg)
Passenger Rear Footpeg Pin & Cotter Pin Set
Passenger Rear Footpeg Pin & Cotter Pin Set. Set Includes 2 Footpeg Pins and 2 Cotter Pins. Replaces OEM # 95015-83000
![Honda CB550K Seat Hinge Pin](/images/parts/100/73-0947.jpg)
Seat Hinge Pin
Seat Hinge Pin, Replaces OEM # 77103-313-000 Note: 2 Used Per Bike, Order the Quantity you Require
![Honda CB550K Carb Top Gasket](/images/parts/100/73-0954.jpg)
Carb Top Gasket
Carburetor Top Gasket, Replaces OEM # 16014-393-004
![Honda CB550K Crank Seal](/images/parts/100/73-0960.jpg)
Crank Seal
Crank Seal - 30 x 42 x 8 - Replaces OEM # 91201-300-003 Note: Please Reference the OEM Number and Seal size above to make sure this is the Crank Seal you Require. Some models use 2 Different Crank Seals.
![Honda CB550K Kickstart Oil Seal](/images/parts/100/73-0962.jpg)
Kickstart Oil Seal
Kickstart Oil Seal - 18 x 29 x 7 - Replaces OEM # 91204-286-003
![Honda CB550K Tach Drive Oil Seal](/images/parts/100/73-0963.jpg)
Tach Drive Oil Seal
Tach Drive Oil Seal - 4.8 x 14.5 x 4 - Replaces OEM # 91256-096-651
![Honda CB550K Clutch Arm Oil Seal](/images/parts/100/73-0965.jpg)
Clutch Arm Oil Seal
Clutch Arm Oil Seal - 10 x 16 x 4.5 - Replaces OEM # 91259-VM0-000
![Honda CB550K Intake Valve](/images/parts/100/73-0981.jpg)
Intake Valve
Intake Valve - Replaces OEM # 14711-107-020 Made in Japan
![Honda CB550K Exhaust Valve](/images/parts/100/73-0982.jpg)
Exhaust Valve
Exhaust Valve - Replaces OEM # 14721-323-005 / 14721-324-010 / 14721-324-000 / 14721-107-020 Made in Japan
![Honda CB550K Front Brake Caliper Bleed Screw](/images/parts/100/73-0993.jpg)
Front Brake Caliper Bleed Screw
Front Brake Caliper Bleed Screw. Replaces OEM # 45224-579-013
![Honda CB550K Handlebar Clutch Lever Pivot Bolt & Nut Set](/images/parts/100/73-0996.jpg)
Handlebar Clutch Lever Pivot Bolt & Nut Set
Handlebar Clutch Lever Pivot Bolt & Nut Set. This is the Set that Fastens the Clutch Lever in Place. Includes One Bolt with One Nut. Replaces OEM # 90114-310-000 (Bolt) and OEM # 94001-06200-0S (Nut).
![Honda CB550K Front Fender Hardware/ Fender Stay Hardware Set](/images/parts/100/73-1010.jpg)
Front Fender Hardware/ Fender Stay Hardware Set
3 PC. Front Fender Hardware/ Fender Stay Hardware Set. Includes Setting Rubber, Bolt and Metal Collar. Replaces OEM#40513-310-000 (Rubber), OEM#40514-310-000 (Metal Collar) and OEM#92101-06020-0A (Bolt). Purchase the Quantity of Sets you Require for your Application
![Honda CB550K Premium ~ Piston Ring Set (Standard Size)](/images/parts/100/73-1025.jpg)
Premium ~ Piston Ring Set (Standard Size)
Premium Japanese made Superior Quality ~ Standard Size Piston Ring Set Ring Set OEM Ref # 13011-374-000 (Std.) Note: This Set includes piston rings to rebuild one piston, 4 Sets are needed to rebuild all pistons.
![Honda CB550K Front Brake Caliper Bolt & Washer Set](/images/parts/100/73-1027.jpg)
Front Brake Caliper Bolt & Washer Set
Front Brake Caliper Bolt & Washer Set. Set includes 2 Bolts and 2 Washers. Replaces OEM # 90165-323-000
![Honda CB550K Swingarm Dust Seal Cap (Set/2)](/images/parts/100/73-1028.jpg)
Swingarm Dust Seal Cap (Set/2)
Swingarm Dust Seal Cap (Set/2). These Caps go on the Ends of the Swingarm Pivot. Replaces OEM # 52144-362-000 X2.
![Honda CB550K Handlebar Brake Lever Pivot Bolt & Nut Set](/images/parts/100/73-1029.jpg)
Handlebar Brake Lever Pivot Bolt & Nut Set
Brake Lever Pivot Bolt & Nut. This is the Set that Fastens the Brake Lever in Place. Includes One Bolt with One Nut. Replaces OEM # 90114-300-000
![Honda CB550K Turn Signal Lamp Lens Screw Set](/images/parts/100/73-1034.jpg)
Turn Signal Lamp Lens Screw Set
Turn Signal Lamp Lens Screw Set/2, Replaces OEM # 93500-04025-0A ALSO Fits our Signal Lens #11-2195 and Signals #11-2114 and #11-2149