HondaCB650 ► 

Refine Search Results
Honda CB650 Carb Rebuild Kit
USD$ 22.15
Listed Models

Carb Rebuild Kit

#48-1662 | Honda CB650 (1980)

Carb Rebuild Kit. Contains: Float Bowl Gasket, Carb Top Gasket, Float Needle, Main Jets #90 and #95, Slide Needle #59A, Jet Needle Holder, 9 Various O-Rings, Needle Screw w O-Ring and Washer. Note: Each Kit Rebuilds One Carb, Order the Quantity of Kits you Require

USD$ 22.15
Listed Models
Honda CB650 Carb Rebuild Kit
USD$ 19.20
Listed Models

Carb Rebuild Kit

#48-1977 | Honda CB650 (1981-1982)

Carb Rebuild Kit For CV Carbs Includes Items Pictured High Quality - Made In Japan 1 Kit Needed Per Carb

USD$ 19.20
Listed Models
Honda CB650 Carb Rebuild Kit
USD$ 28.10
Listed Models

Carb Rebuild Kit

#48-1992 | Honda CB650 (1981-1982)

Carb Rebuild Kit For CV Carbs Includes Items Pictured High Quality - Made In Japan 1 Kit Needed Per Carb

USD$ 28.10
Listed Models
Honda CB650 1971 Performance Main Jet Kit
USD$ 29.55
Listed Models

1971 Performance Main Jet Kit

#48-2114 | Honda CB650 (1981-1982)

1971 Performance Main Jet Kit. Kit includes a total of 16 Main Jets for Keihin Carbs. Use this jet kit to unleash the extra power you should have from your aftermarket exhaust, flee flowing air filters or any engine mods you have made. Kit includes Main Jets #120 (X4), #122 (X4), #125 (X4) and #128 (X4).

USD$ 29.55
Listed Models
Honda CB650 Pilot Jet Set/4
USD$ 10.30
Listed Models
Out of Stock
Email Me When Available

Pilot Jet Set/4

#48-3100 | Honda CB650 (1982)

Stock Type Pilot Jet Set of 4 (Size #35). Pilot Jets (your idle and low speed operation) are critical for smooth idling and lower rpm driving. When rebuilding carbs it is highly recommended to replace these pilot jets to ensure your bike is running as well as possible. Note: These Pilot Jets (#35) were the standard size equipped from the factory

USD$ 10.30
Listed Models
Out of Stock
Email Me When Available
Honda CB650 Float Needle
USD$ 5.55
Listed Models

Float Needle

#48-5010 | Honda CB650 (1979-1980)

Float Needle High Quality - Made In Japan OEM Ref # 16155-382-004 / 16011-393-004 / 16011-KG0-891 / 16030-1007 / 16011-382-004

USD$ 5.55
Listed Models
Honda CB650 Float Needle
USD$ 5.90
Listed Models

Float Needle

#48-5011 | Honda CB650 (1981-1982)

Float Needle High Quality - Made In Japan OEM Ref # 16155-413-751 / 16155-397-971

USD$ 5.90
Listed Models
Honda CB650 Float Bowl Drain Screw
USD$ 4.40
Listed Models

Float Bowl Drain Screw

#48-5042 | Honda CB650 (1979-1983)

Float Bowl Drain Screw w O-Ring. Note: We sell these each, order the quantity you require

USD$ 4.40
Listed Models
Honda CB650 Press In Pilot Jet Set/4 ~ #35 Size
USD$ 15.50
Listed Models

Press In Pilot Jet Set/4 ~ #35 Size

#48-9028 | Honda CB650 (1979-1980)

Press In Pilot Jet Set/4 ~ #35 Size Please Double Check you Require the Stock #35 Size Before Ordering

USD$ 15.50
Listed Models
Honda CB650 Air Cut Off Valve With Cover
USD$ 22.15
Listed Models

Air Cut Off Valve With Cover

#48-9029 | Honda CB650 (1980)

Carb Air Cut Off Valve with Cover - OEM # 16048-429-771 (Diaphragm), 16048-425-771 (Spring + 1 O-Ring), 16048-429-771 (Cover).

USD$ 22.15
Listed Models
Honda CB650 Float Bowl Screws Pk/2
USD$ 1.45
Listed Models

Float Bowl Screws Pk/2

#48-9031 | Honda CB650 (1981-1982)

Float Bowl Screws with Lock Washers, Pack of 2 Screws and 2 Washers. These fasten the float bowl in place. Replaces OEM # 93892-04016-00 Order Quantity of Screws you Require

USD$ 1.45
Listed Models
Honda CB650 Press In Pilot Jet Set/4 ~ #38 Size
USD$ 15.50
Listed Models

Press In Pilot Jet Set/4 ~ #38 Size

#48-9033 | Honda CB650 (1979-1980)

Press In Pilot Jet Set/4 ~ #38 Size Please Double Check you Require the #38 Size Before Ordering

USD$ 15.50
Listed Models
Honda CB650 Press In Pilot Jet Set/4 ~ #40 Size
USD$ 15.50
Listed Models

Press In Pilot Jet Set/4 ~ #40 Size

#48-9034 | Honda CB650 (1979-1980)

Press In Pilot Jet Set/4 ~ #40 Size Please Double Check you Require the #40 Size Before Ordering

USD$ 15.50
Listed Models
Honda CB650 Press In Pilot Jet Set/4 ~ #42 Size
USD$ 15.50
Listed Models

Press In Pilot Jet Set/4 ~ #42 Size

#48-9035 | Honda CB650 (1979-1980)

Press In Pilot Jet Set/4 ~ #42 Size Please Double Check you Require the #42 Size Before Ordering

USD$ 15.50
Listed Models
Honda CB650 Lens Screw
USD$ 2.35
Listed Models

Lens Screw

#49-0145 | Honda CB650 (1979-1982)

Tail Light Lens Screws, Pack of 10 Screws. Replaces OEM # 93500-04055-4J ISO Std. Pitch - Steel Plated Size: 4 x 55mm

USD$ 2.35
Listed Models
Honda CB650 Side Cover Emblem Attachment Nut
USD$ 1.50
Listed Models

Side Cover Emblem Attachment Nut

#49-0258 | Honda CB650 (1982)

Side Cover Emblem Attachment Nut, Replaces OEM# 90315-504-000 Sold Each, Order the Quantity you Require

USD$ 1.50
Listed Models
Honda CB650 Shock Absorber Washer
USD$ 1.65
Listed Models

Shock Absorber Washer

#49-0778 | Honda CB650 (1979-1982)

Shock Absorber Washer, Used when Installing Shocks. Replaces OEM # 90521-292-000 Note: Washers sold Each, order the quantity you require

USD$ 1.65
Listed Models
Honda CB650 Shock Absorber Nut
USD$ 2.40
Listed Models

Shock Absorber Nut

#49-0779 | Honda CB650 (1979-1982)

Shock Absorber Nut, Used when Installing Shocks. Replaces OEM # 90309-315-000 Note: Nuts sold Each, order the quantity you require

USD$ 2.40
Listed Models
Honda CB650 OEM Type Shock Absorber Bolt
USD$ 2.90
Listed Models

OEM Type Shock Absorber Bolt

#49-0780 | Honda CB650 (1980-1982)

Chrome Shock Absorber Bolt, Replaces OEM # 93201-10032-0B / 93200-10032-0A Note: 2 Bolts Used Per Bike, Order the Quantity you Require

USD$ 2.90
Listed Models
Honda CB650 Front Sprocket Lock Plate Set
USD$ 3.65
Listed Models

Front Sprocket Lock Plate Set

#49-0782 | Honda CB650 (1979-1982)

Front Sprocket Lock Plate with 2 Lock Plate Bolts. It's Always good to replace these when installing a new front sprocket. Replaces OEM # 23811-292-000 (Plate) and OEM # 92101-06016-0A (Bolts) X2.

USD$ 3.65
Listed Models
Honda CB650 Tappet Adjuster Screw & Nut Set
USD$ 2.90
Listed Models

Tappet Adjuster Screw & Nut Set

#49-0784 | Honda CB650 (1979-1982)

Tappet Adjuster Screw & Nut Set. Each Set includes one Tappet Adjuster Screw and one Nut. Replaces OEM # 90012-426-000 (Adjuster), OEM # 90206-250-000 (Nut). Note: Order the Quantity of Sets your Bike Requires

USD$ 2.90
Listed Models
Honda CB650 Side Stand Spring
USD$ 2.20
Listed Models

Side Stand Spring

#49-0788 | Honda CB650 (1979-1982)

Side Stand Spring, Replaces OEM # 95014-72402

USD$ 2.20
Listed Models
Honda CB650 Speedometer Cable
USD$ 12.55
Listed Models

Speedometer Cable

#51-2303 | Honda CB650 (1979)

Speedometer Cable - Black - OEM Ref # 44830-KB4-700 / 44830-356-010 Made in Japan

USD$ 12.55
Listed Models
Honda CB650 Throttle Cable - Pull
USD$ 14.00
Listed Models

Throttle Cable - Pull

#51-3538 | Honda CB650 (1979)

Throttle Cable "A" - "Pull Type" - OEM Ref #17910-426-831

USD$ 14.00
Listed Models
Honda CB650 Throttle Cable - Push
USD$ 14.00
Listed Models

Throttle Cable - Push

#51-3539 | Honda CB650 (1979)

Throttle Cable "B" - "Push Type" - OEM Ref # 17920-426-831

USD$ 14.00
Listed Models
The names Honda, Yamaha, Kawasaki, Suzuki and any other trade names or symbols belonging to each respective corporation are stated for reference purposes only. The products on this site are after market (not OEM) replacement parts and accessories only. We have no relationship to the listed companies.