HondaCB650SC ► 

Refine Search Results
Honda CB650SC Cam Cover Mount
USD$ 7.35
Listed Models

Cam Cover Mount

#01-0116 | Honda CB650SC (1982)

Rubber Cam Cover Mount OEM Ref # 90541-425-000 / 90541-425-871

USD$ 7.35
Listed Models
Honda CB650SC Cylinder Head Nut Cover
USD$ 2.20
Listed Models

Cylinder Head Nut Cover

#01-0137 | Honda CB650SC (1982)

Cylinder Head Nut Cover OEM Ref # 91318-300-013

USD$ 2.20
Listed Models
Honda CB650SC Cam Chain
USD$ 56.20
Listed Models

Cam Chain

#01-0223 | Honda CB650SC (1982)

Silent Cam Chain 412 x 112 OEM Ref # 14401-426-024 / 12760-38200 Made In Japan

USD$ 56.20
Listed Models
Honda CB650SC Engine Oil Seal Kit
USD$ 22.15
Listed Models

Engine Oil Seal Kit

#01-9003 | Honda CB650SC (1982)

7 pc. Engine Oil Seal Kit, Superior OEM Quality, Made in Japan

USD$ 22.15
Listed Models
Honda CB650SC Piston Pin Clips
USD$ 1.10
Listed Models

Piston Pin Clips

#05-7201 | Honda CB650SC (1982-1985)

Piston Pin Clips, 15mm (Pk/2) - Japanese made Superior Quality OEM Ref. # 94601-15000

USD$ 1.10
Listed Models
Honda CB650SC High Performance Kibblewhite Valve Stem Seal Set
USD$ 28.80
Listed Models

High Performance Kibblewhite Valve Stem Seal Set

#12-0083 | Honda CB650SC (1982)

High Performance Kibblewhite 100% Viton Valve Stem Seal Set of 8. Replaces OEM# 12209-333-005. Made in the USA by Kibblewhite who have been making High Quality Performance parts for 75+ years. Kibblewhite Red 100% Viton valve stem seals are designed to have optimum fitment, allow, maximum lift, and to give maximum life. Kibblewhite Red valve stem seals are resistant to high temperatures, petroleum products and the corrosive gasses that are the by-products of combustion. These viton seals retain their ability to seal in situations where other materials could harden and allow oil to enter the combustion chamber causing detonation, carbon build up and a loss of power. The Red Ones are truly the racers choice.

USD$ 28.80
Listed Models
Honda CB650SC Valve Cover Gasket
USD$ 24.40
Listed Models

Valve Cover Gasket

#12-1023 | Honda CB650SC (1983-1985)

Valve Cover Gasket OEM Ref # 12391-ME5-306 / 12391-ME5-000

USD$ 24.40
Listed Models
Honda CB650SC Oil Filter
USD$ 4.40
Listed Models

Oil Filter

#15-0002 | Honda CB650SC (1982-1985)

Oil Filter OEM Ref # 15410-426-010 / 15410-422-004 / 16099-003 / 36Y-13441-00 Note: If you require new oil filter o-rings, springs or washers we sell these on our site as well

USD$ 4.40
Listed Models
Honda CB650SC Drain Plug Crush Washer
USD$ 1.10
Listed Models

Drain Plug Crush Washer

#15-0006 | Honda CB650SC (1982-1985)

Drain Plug Crush Washer 12mm x 18mm x 1mm

USD$ 1.10
Listed Models
Honda CB650SC Oil Drain Plug
USD$ 7.35
Listed Models

Oil Drain Plug

#15-0016 | Honda CB650SC (1982-1985)

Magnetic Oil Drain Plug 12mm Diameter 1.50 Thread Pitch OEM Ref # 92800-12000 / 92066-1174 / 01107-12208

USD$ 7.35
Listed Models
Honda CB650SC Oil Filter Washer - Each
USD$ 1.85
Listed Models

Oil Filter Washer - Each

#15-0042 | Honda CB650SC (1982-1985)

Oil Filter Washer - Each 30mm OD - 20.5mm ID - .5mm Thickness Replaces OEM# 15414-300-000 Sold Each, Order the Quantity you Require

USD$ 1.85
Listed Models
Honda CB650SC Oil Filter O-Ring Set
USD$ 2.20
Listed Models

Oil Filter O-Ring Set

#15-0050 | Honda CB650SC (1982)

Oil Filter O-Ring Set Fits Oil Filter - 15410-426-005 / 15410-426-010

USD$ 2.20
Listed Models
Honda CB650SC Oil Filter Spring
USD$ 1.30
Listed Models

Oil Filter Spring

#15-0055 | Honda CB650SC (1982-1985)

Oil Filter Spring, Replaces OEM # 15415-300-000

USD$ 1.30
Listed Models
Honda CB650SC Chrome Spin On Oil Filter
USD$ 20.70
Listed Models

Chrome Spin On Oil Filter

#15-1006 | Honda CB650SC (1982-1985)

Chrome Spin On Oil Filter Replaces Stock OEM Housing, Filter Bolt and Paper Element Filter. Note: When installing screw in the threaded bung first and then install the filter onto the bung.

USD$ 20.70
Listed Models
Honda CB650SC Oil Filter Bolt
USD$ 16.25
Listed Models

Oil Filter Bolt

#15-3022 | Honda CB650SC (1979-1982)

Oil Filter Bolt OEM Ref # 15420-333-000 / 92003-094 / 92003-193 / 92001-1074

USD$ 16.25
Listed Models
Honda CB650SC Engine Gasket Set
USD$ 147.95
Listed Models

Engine Gasket Set

#18-0108 | Honda CB650SC (1983-1985)

Complete Engine Gasket Set Includes all Engine Gaskets High Quality - Made In Italy by Athena Athena Product # P400210850653

USD$ 147.95
Listed Models
Honda CB650SC Athena Engine Gasket Set
USD$ 122.05
Listed Models

Athena Engine Gasket Set

#18-0202 | Honda CB650SC (1982)

Complete Engine Gasket Set Includes all Engine Gaskets High Quality - Made In Italy by Athena Athena Product #P400210850600/1

USD$ 122.05
Listed Models
Honda CB650SC Athena Gasket Set (Top End Set Only)
USD$ 96.15
Listed Models

Athena Gasket Set (Top End Set Only)

#18-0434 | Honda CB650SC (1982)

Athena Top End Gasket Set - Fits: Honda CB650 (1979-82), CB650C (1980-81) Custom, CB650SC (1982) Nighthawk Sets made by Athena of Italy the European original equipment supplier to Yamaha, Honda, Kawasaki, Suzuki and all major Italian bike makers. Top Quality ISO-9000 approved. Includes Contents shown in the Photo

USD$ 96.15
Listed Models
Honda CB650SC Overhaul Gasket Set
USD$ 92.45
Listed Models

Overhaul Gasket Set

#18-0440 | Honda CB650SC (1982)

Overhaul Engine Gasket Set

USD$ 92.45
Listed Models
Honda CB650SC Cylinder Head Gasket
USD$ 44.35
Listed Models

Cylinder Head Gasket

#18-6992 | Honda CB650SC (1982)

Cylinder Head Gasket - OEM Ref.# 12251-426-306

USD$ 44.35
Listed Models
Honda CB650SC Valve Cover Gasket
USD$ 14.00
Listed Models

Valve Cover Gasket

#18-6995 | Honda CB650SC (1982)

Valve Cover Gasket (Cylinder Cover) - OEM Ref. # 12391-460-770

USD$ 14.00
Listed Models
Honda CB650SC Cylinder Sleeve O-Ring Gasket Set
USD$ 2.20
Listed Models

Cylinder Sleeve O-Ring Gasket Set

#18-7068 | Honda CB650SC (1982)

Cylinder Sleeve O-Rings (Set of 4) OEM Ref. # 91304-286-000 - 4 pc. required per Engine

USD$ 2.20
Listed Models
Honda CB650SC Gear Change Lever
USD$ 13.30
Listed Models

Gear Change Lever

#19-0070 | Honda CB650SC (1982)

Gear Change Lever Universal Fit

USD$ 13.30
Listed Models
Honda CB650SC Cotter Valve / Valve Keeper
USD$ 1.65
Listed Models

Cotter Valve / Valve Keeper

#29-0083 | Honda CB650SC (1982)

Cotter Valve / Valve Keeper, Replaces OEM# 14781-107-003 / 14781-107-020. 2 Used For Each Valve Spring. Sold Each, Order the Quantity you Require

USD$ 1.65
Listed Models
Honda CB650SC Tappet Adjuster Screw & Nut Set
USD$ 2.90
Listed Models

Tappet Adjuster Screw & Nut Set

#49-0784 | Honda CB650SC (1982)

Tappet Adjuster Screw & Nut Set. Each Set includes one Tappet Adjuster Screw and one Nut. Replaces OEM # 90012-426-000 (Adjuster), OEM # 90206-250-000 (Nut). Note: Order the Quantity of Sets your Bike Requires

USD$ 2.90
Listed Models
Honda CB650SC Stock Type Gearshift Lever Rubber
USD$ 4.80
Listed Models

Stock Type Gearshift Lever Rubber

#73-0838 | Honda CB650SC (1982-1985)

Stock Type Gearshift Lever Rubber, Replaces OEM # 24781-419-000

USD$ 4.80
Listed Models
Honda CB650SC Valve Stem Seal
USD$ 2.80
Listed Models

Valve Stem Seal

#73-0871 | Honda CB650SC (1982)

Valve Stem Seal. Replaces OEM # 12209-333-005 / 12209-333-005 Sold Each - Order the Quantity you Require

USD$ 2.80
Listed Models
Honda CB650SC Tach Drive Plug Block Off w O-Ring
USD$ 14.75
Listed Models

Tach Drive Plug Block Off w O-Ring

#73-0884 | Honda CB650SC (1982)

Tach Drive Plug (Block Off) with O-ring. This plug is generally used when the tachometer cable drive is removed and still needs to be blocked off to prevent oil leakage. This plug has an o-ring groove machined in it for better sealing. Several bike builders just cut the stock cable off and left the Honda cable drive end installed in the valve cover. This plug is a much cleaner option in both functionality and looks. These plugs are a real nice touch when you are not using the stock tachometer, and need to eliminate the cable, or are using an electronic tach. Installs in about a minute, no need to remove the valve cover to remove the tach drive gear assy. Fits tachometer cables that are approximately 15mm in diameter with a 10.5mm groove and held in place with a screw.

USD$ 14.75
Listed Models
Honda CB650SC Crank Seal
USD$ 4.40
Listed Models

Crank Seal

#73-0960 | Honda CB650SC (1982)

Crank Seal - 30 x 42 x 8 - Replaces OEM # 91201-300-003 Note: Please Reference the OEM Number and Seal size above to make sure this is the Crank Seal you Require. Some models use 2 Different Crank Seals.

USD$ 4.40
Listed Models
Honda CB650SC Tach Drive Oil Seal
USD$ 2.90
Listed Models

Tach Drive Oil Seal

#73-0964 | Honda CB650SC (1982)

Tach Drive Oil Seal - 4.8 x 14.5 x 5 - Replaces OEM # 91256-425-003

USD$ 2.90
Listed Models
Honda CB650SC Shift Shaft Oil Seal
USD$ 2.90
Listed Models
Out of Stock
Email Me When Available

Shift Shaft Oil Seal

#73-0968 | Honda CB650SC (1982)

Shift Shaft Oil Seal - 12.5 x 25 x 8 - Replaces OEM # 91204-425-003

USD$ 2.90
Listed Models
Out of Stock
Email Me When Available
Honda CB650SC Intake Valve
USD$ 11.05
Listed Models

Intake Valve

#73-0979 | Honda CB650SC (1982)

Intake Valve - Replaces OEM # 14711-426-003 Made in Japan

USD$ 11.05
Listed Models
Honda CB650SC Exhaust Valve
USD$ 16.25
Listed Models

Exhaust Valve

#73-0980 | Honda CB650SC (1982)

Exhaust Valve - Replaces OEM # 14721-426-003 Made in Japan

USD$ 16.25
Listed Models
Honda CB650SC Piston Ring Set (Standard Size)
USD$ 24.40
Listed Models

Piston Ring Set (Standard Size)

#73-1024 | Honda CB650SC (1982)

Standard Size Piston Ring Set Ring Set OEM Ref # 13011-426-004 (Std.) Japanese made Superior Quality Note: This Set includes piston rings to rebuild one piston, 4 Sets are needed to rebuild all pistons.

USD$ 24.40
Listed Models
Honda CB650SC Custom Performance Magnetic Oil Drain Plug ~ Joker Machine
USD$ 29.55
Listed Models

Custom Performance Magnetic Oil Drain Plug ~ Joker Machine

#73-1074 | Honda CB650SC (1982-1985)

Joker Machine Brand ~ Custom Performance Magnetic Oil Drain Plug - 12mm. Dia x M1.5 - OEM Ref # 92800-12000 Plug features an extended length HIGH POWER "rare earth" Neodymium-Iron-Boron Magnet pressed into the body which grabs steel debris from your tank and motor exceptionally well! High Quality CNC machined part made in the U.S.A. Works on the oil tank drain (right side of bike) and on the oil pan drain (beneath the engine) - use two for the ultimate engine oil debris collection set-up.

USD$ 29.55
Listed Models
Honda CB650SC Tach Drive Plug Block Off ~ Black ~ Joker Machine
USD$ 22.15
Listed Models

Tach Drive Plug Block Off ~ Black ~ Joker Machine

#73-1075 | Honda CB650SC (1982)

Joker Machine Brand ~ Black Tach Drive Plug (Block Off). This plug is generally used when the tachometer cable drive is removed and still needs to be blocked off to prevent oil leakage. This plug has an o-ring groove machined in it for better sealing. Several bike builders just cut the stock cable off and left the Honda cable drive end installed in the valve cover. This plug is a much cleaner option in both functionality and looks. These plugs are a real nice touch when you are not using the stock tachometer, and need to eliminate the cable, or are using an electronic tach. Installs in about a minute, no need to remove the valve cover to remove the tach drive gear assy. High quality CNC machined part, made in the U.S.A.

USD$ 22.15
Listed Models
Honda CB650SC Rivet Link
USD$ 2.20

Rivet Link

#01-8801

Cam Chain Rivet Link Stepped Parallel Plate Fits BF05T Cam Chains

USD$ 2.20
Honda CB650SC Rivet Link
USD$ 3.35

Rivet Link

#01-8802

Cam Chain Rivet Link Stepped Parallel Plate Fits 219FTSS Cam Chains

USD$ 3.35
Honda CB650SC Rivet Link
USD$ 2.90

Rivet Link

#01-8803

Cam Chain Rivet Link Stepped Peanut Plate Fits 219T Cam Chains

USD$ 2.90
Honda CB650SC Clip Link
USD$ 2.20

Clip Link

#01-8813

Cam Chain Clip Link Peanut Shape Fits 25H Cam Chains

USD$ 2.20
Honda CB650SC Cam Chain Rivet Link
USD$ 2.90

Cam Chain Rivet Link

#01-8814

Cam Chain Rivet Link Peanut Shape Fits BS05MH TSUBAKI

USD$ 2.90
Honda CB650SC Cam Chain Rivet Link
USD$ 2.20

Cam Chain Rivet Link

#01-8815

Cam Chain Rivet Link Peanut Shape Fits BF05M TSUBAKI

USD$ 2.20
Honda CB650SC Cam Chain Rivet Link
USD$ 2.90

Cam Chain Rivet Link

#01-8816

Cam Chain Rivet Link Fits 82RH2015

USD$ 2.90
Honda CB650SC Athesil - RTV Silicone Sealant
USD$ 12.55

Athesil - RTV Silicone Sealant

#05-0000

Athesil, the brand new RTV (Room-Temperature-Vulcanizing Silicone) is the sealant developed by Athena, the world's leading brand of Aftermarket gaskets and sealing products, meets the specific needs of professional technicians and mechanics in the automotive, nautical, motorcycle, industrial and off-road markets. Born to be the premium choice for every professional in the world of engines, it is extremely versatile, and it is the ultimate solution for maintenance and repair. Athesil joins, seals, repairs, corrects, fixes, and can be used as FIPG ("formed-in-place" gasket) for sealing and adhesion of glass, plastic or metal components, crankcases, pumps and flanges. After polymerization, Athesil forms a resistant, flexible and waterproof silicone rubber seal that perfectly resists aging, atmospheric agents and thermal cycles while remaining permanently elastic. Fluid resistant and thermally stable, Athesil does not damage lambda sensors, is easy to apply, and it is non-toxic nor flammable.

USD$ 12.55
Honda CB650SC Three Bond Spoke Set Adhesive
USD$ 11.80
Out of Stock
Email Me When Available

Three Bond Spoke Set Adhesive

#05-0003

Three Bond Spoke Set Adhesive - 0.34 Oz, 10ml. Sets spoke nipples snug while protecting threads from rust and corrosion. Helps wheels stay true longer. Drip control nozzle for easier applications.

USD$ 11.80
Out of Stock
Email Me When Available
Honda CB650SC Three Bond Super Glue
SALE: USD$ 5.95
(USD$ 7.35)

Three Bond Super Glue

#05-0004

Three Bond Super Glue (Gel Type) General Purpose Adhesive - 0.07 Oz, 2ml. Three Bond Super Glue attains practical-use strength in seconds. Contains no evaporative elements, so there's never any shrinkage to weaken bonding points. Excellent for nonporous materials. Made in the U.S.A.

SALE: USD$ 5.95
(USD$ 7.35)
Honda CB650SC Three Bond Thread Lock
USD$ 11.80
Out of Stock
Email Me When Available

Three Bond Thread Lock

#05-0005

Three Bond Thread Lock - 0.34 Oz, 10ml. Low Strength, Removeable, Frequent Repair Type. Perfect for adding an extra hold to small screws and bolts which are frequently removed. Adds an extra hold of 10-20% greater then that of basic tightening. Blue in color.

USD$ 11.80
Out of Stock
Email Me When Available
Honda CB650SC Oil Filter Washers
USD$ 4.40

Oil Filter Washers

#15-0039

Oil Filter Washers Pk/5 30mm OD - 20.5mm ID - .5mm Thickness Replaces OEM# 15414-300-000

USD$ 4.40
Honda CB650SC Oil Filter O-Ring
USD$ 1.45

Oil Filter O-Ring

#15-0052

Oil Filter O-Ring Pk/2 Fits Oil Filter - 1L9-13440-90

USD$ 1.45
Honda CB650SC Oil Filter O-Ring
USD$ 0.95

Oil Filter O-Ring

#15-0053

Oil Filter O-Ring Pk/2 Fits Oil Filter - 1J7-13440-90

USD$ 0.95
The names Honda, Yamaha, Kawasaki, Suzuki and any other trade names or symbols belonging to each respective corporation are stated for reference purposes only. The products on this site are after market (not OEM) replacement parts and accessories only. We have no relationship to the listed companies.