HondaCBX ► 

Honda CBX Master Cylinder Reservoir Kit
US$ 52.00
Fits: CBX (79-80)

Master Cylinder Reservoir Kit

#29-0050 | Honda CBX (1979-1980)

Master Cylinder Reservoir Kit - Front 4 Screw Cover

Honda CBX Front Brake Caliper Piston
US$ 32.00
Fits: CBX (79-80)

Front Brake Caliper Piston

#29-0514 | Honda CBX (1979-1980)

Front Brake Caliper Piston (1) - 42.8mm Diameter x 41mm Length - OEM Ref. #45107-415-006.

Honda CBX Shock Absorber Joint Rubber Set/2
US$ 6.50
Fits: CBX (79-80)

Shock Absorber Joint Rubber Set/2

#73-0093 | Honda CBX (1979-1980)

Shock Absorber Joint Rubber Set/2. Replaces OEM#52484-292-000.

Honda CBX Master Cylinder Rubber Boot
US$ 7.50
Fits: CBX (79-80)

Master Cylinder Rubber Boot

#73-0094 | Honda CBX (1979-1980)

Master Cylinder Rubber Boot. Replaces OEM#45522-422-000.

Honda CBX Primary Chain
US$ 190.00
Fits: CBX (79-82)

Primary Chain

#73-0159 | Honda CBX (1979-1982)

OEM Quality Primary Chain, 58 Link. Replaces OEM# 23131-422-004.

Honda CBX Valve Shim Kit
US$ 129.95
Fits: CBX (79-82)

Valve Shim Kit

#73-0172 | Honda CBX (1979-1982)

20 Piece Valve Shim Kit with Plastic Case, 25mm Diameter Valve Shims. Includes 2 of each of the following sizes. 2.30, 2.40, 2.50, 2.55, 2.60, 2.70, 2.80, 2.90, 3.00, 3.10.

Honda CBX Front Wheel Bearing Retainer Ring Tool
US$ 26.00
Fits: CBX (79-82)

Front Wheel Bearing Retainer Ring Tool

#73-0186 | Honda CBX (1979-1982)

Front Wheel Bearing Retainer Ring Tool. High quality tool for removing and fitting the front wheel bearing retainer ring with 1/2 inch socket bar wrench tool hole. The perfect tool for easier removal and fitting without damaging the special retainer ring.

Honda CBX Rear Brake Light Stop Switch Spring
US$ 6.00
Fits: CBX (79-82)

Rear Brake Light Stop Switch Spring

#73-0851 | Honda CBX (1979-1982)

Rear Brake Light Stop Switch Spring. This is the Spring that Attaches to the Rear Stop Light Switch. Replaces OEM# 35357-358-000.

Honda CBX Tail Light Lens Screws
US$ 5.00
Fits: CBX (79-82)

Tail Light Lens Screws

#73-0899 | Honda CBX (1979-1982)

Tail Light Lens Screws, Set of 4. Replaces OEM# 90147-147-671.

Honda CBX Air Sensor Sub Wire with Rubber
US$ 14.00
Fits: CBX (81-82)

Air Sensor Sub Wire with Rubber

#73-0908 | Honda CBX (1981-1982)

Air Sensor Sub Wire with Rubber Cover, this is the wire that connects to and covers the air sensor. Replaces OEM# 32111-463-000.

Honda CBX Gas Cap Rubber Seal
US$ 8.00
Fits: CBX (80)

Gas Cap Rubber Seal

#73-0919 | Honda CBX (1980)

Gas Cap Rubber Seal, Replaces OEM#17632-176-771

Honda CBX Fork Seal Stopper Metal Ring Pk/2
US$ 6.00
Fits: CBX (79)

Fork Seal Stopper Metal Ring Pk/2

#73-0940 | Honda CBX (1979)

Fork Seal Stopper Metal Ring Pk/2, Replaces OEM#51447-KL4-951. This is the Metal Ring above the Fork Seal.

Honda CBX Swingarm Dust Seal Cap (Set/2)
US$ 16.00
Fits: CBX (79)

Swingarm Dust Seal Cap (Set/2)

#73-1028 | Honda CBX (1979)

Swingarm Dust Seal Cap (Set/2). These Caps go on the Ends of the Swingarm Pivot. Replaces OEM# 52144-362-000 X2.

Honda CBX Handlebar Brake Lever Pivot Bolt Set
US$ 7.00
Fits: CBX (79-80)

Handlebar Brake Lever Pivot Bolt Set

#73-1030 | Honda CBX (1979-1980)

Handlebar Brake Lever Pivot Bolt, Washer & Nut Set. This is the Set that Fastens the Brake Lever in Place. Includes One Bolt with One Washer and Nut. Replaces OEM# 90114-422-000 (Bolt).

Honda CBX Handlebar Brake Lever Pivot Bolt & Nut Set
US$ 8.00
Fits: CBX (81-82)

Handlebar Brake Lever Pivot Bolt & Nut Set

#73-1031 | Honda CBX (1981-1982)

Handlebar Brake Lever Pivot Bolt & Nut Set. This is the Set that Fastens the Brake Lever in Place. Includes One Bolt with One Nut. Replaces OEM# 90114-MA5-671 (Bolt) and OEM#94050-06000 (Nut).

▼ Show Universal Parts ▼
The names Honda, Yamaha, Kawasaki, Suzuki and any other trade names or symbols belonging to each respective corporation are stated for reference purposes only. The products on this site are after market (not OEM) replacement parts and accessories only. We have no relationship to the listed companies.