HondaCL160 ► 

Refine Search Results
Honda CL160 Clutch Lever ~ GP Style
USD$ 5.90
Listed Models

Clutch Lever ~ GP Style

#08-0080 | Honda CL160 (1966)

Clutch Lever - Custom GP Style in Silver, This Has More of a Bend/Kickback then the stock lever. Replaces OEM # 53178-369-700

USD$ 5.90
Listed Models
Honda CL160 Denso Ignition Contact Points
USD$ 5.90
Listed Models

Denso Ignition Contact Points

#14-0004 | Honda CL160 (1966-1968)

Contact Points (1pc.) - Replaces OEM # 30202-107-004 / 30202-216-004 / 30202-107-154 These points are for Nippondenso ignitions Only. They are NOT for Hitachi or Kokusan Ignitions. Please check which type you have before ordering. Honda used different ignition systems on some of the same years of bikes.

USD$ 5.90
Listed Models
Honda CL160 Contact Point ~ Left Side
USD$ 9.25
Listed Models

Contact Point ~ Left Side

#14-0008 | Honda CL160 (1966)

Contact Point ~ Left Side - Replaces OEM# 30204-292-003 / 30204-292-154

USD$ 9.25
Listed Models
Honda CL160 Exhaust Gasket (Each)
USD$ 2.60
Listed Models

Exhaust Gasket (Each)

#17-2816 | Honda CL160 (1966)

Exhaust Gasket - 1 Pc OEM Ref # 18291-216-000 / 18291-MN5-650 Sold Each, Order the Quantity you Require

USD$ 2.60
Listed Models
Honda CL160 Exhaust Gasket Pk/10
USD$ 21.95
Listed Models

Exhaust Gasket Pk/10

#17-3816 | Honda CL160 (1966)

Exhaust Gasket Pk/10 OEM Ref # 18291-216-000 / 18291-MN5-650

USD$ 21.95
Listed Models
Honda CL160 Hot Shot Rectifier / Regulator
USD$ 125.75
Listed Models

Hot Shot Rectifier / Regulator

#24-2089 | Honda CL160 (1966)

Rick's Electric Brand Hot Shot Rectifier / Regulator. Replaces OEM# 31400-292-670 / 31700-455-671 / 31700-292-008. This combination unit works with the stock stator to provide an upgraded charging system; it allows the stator to charge at full capacity 100% of the time! This is a direct plug-in combination rectifier-regulator that looks the same as the OE version & will mount in the same location as the OE rectifier for easy install. This unit is NOT compatible with lithium-ion batteries. If you have a Lithium Ion battery installed we sell a lithium ion version of this item.

USD$ 125.75
Listed Models
Honda CL160 Fuel Petcock Gasket
USD$ 4.40
Listed Models

Fuel Petcock Gasket

#29-7028 | Honda CL160 (1966)

Fuel Petcock Gasket. Replaces OEM # 16955-268-020

USD$ 4.40
Listed Models
Honda CL160 Clutch Center Nut Removal Tool
USD$ 8.85
Listed Models

Clutch Center Nut Removal Tool

#35-0051 | Honda CL160 (1966)

Clutch Center Nut Removal Tool, The perfect tool for easier removal/fitting, without damaging the special locking nut. Inside diameter 24mm, use with 3/8" driver.

USD$ 8.85
Listed Models
Honda CL160 Clutch Center Nut Removal Tool ~ Premium
USD$ 12.55
Listed Models

Clutch Center Nut Removal Tool ~ Premium

#35-0076 | Honda CL160 (1966)

Premium Clutch Center Nut Removal Tool, The perfect tool for easier removal/fitting, without damaging the special locking nut. Both ends with 1/2 drive extension bar, Diameter 20 x 24.

USD$ 12.55
Listed Models
Honda CL160 Steel Clutch Plate
USD$ 7.35
Listed Models
Out of Stock
Email Me When Available

Steel Clutch Plate

#39-1242 | Honda CL160 (1966)

Steel Clutch Plate A OEM Ref # 23311-200-000 Order the Quantity you require

USD$ 7.35
Listed Models
Out of Stock
Email Me When Available
Honda CL160 Carb Rebuild Kit
USD$ 14.75
Listed Models

Carb Rebuild Kit

#48-1389 | Honda CL160 (1966-1968)

Carb Rebuild Kit. Note: Each Kit Rebuilds One Carb, Order the Quantity of Kits you Require

USD$ 14.75
Listed Models
Honda CL160 Passenger Rear Footrest Rubber Set
USD$ 9.60
Listed Models

Passenger Rear Footrest Rubber Set

#73-0185 | Honda CL160 (1966)

Passenger Rear Footrest Rubber Set/2, Replaces OEM # 95011-31000

USD$ 9.60
Listed Models
Honda CL160 Carb Float & Pin
USD$ 12.55
Listed Models

Carb Float & Pin

#73-0870 | Honda CL160 (1966)

Carb Float & Pin, Replaces OEM # 16013-116-700 Sold Each, Order the Quantity you Require

USD$ 12.55
Listed Models
Honda CL160 Grease Fitting Nipple (Pk/2)
USD$ 5.15
Listed Models

Grease Fitting Nipple (Pk/2)

#73-0941 | Honda CL160 (1966)

Grease Fitting Nipple A .45 (Pk/2). Replaces OEM # 96201-30001

USD$ 5.15
Listed Models
Honda CL160 Handlebar Clutch Lever Pivot Bolt & Nut Set
USD$ 3.65
Listed Models

Handlebar Clutch Lever Pivot Bolt & Nut Set

#73-0996 | Honda CL160 (1966)

Handlebar Clutch Lever Pivot Bolt & Nut Set. This is the Set that Fastens the Clutch Lever in Place. Includes One Bolt with One Nut. Replaces OEM # 90114-310-000 (Bolt) and OEM # 94001-06200-0S (Nut).

USD$ 3.65
Listed Models
Honda CL160 Front Cable/ Stop Switch Clip
USD$ 4.40
Listed Models

Front Cable/ Stop Switch Clip

#73-1116 | Honda CL160 (1966)

Front Cable Clip, This Clip Holds the Stop Switch Wires to the Cable to Keep Things Tidy. Replaces OEM # 45465-270-000

USD$ 4.40
Listed Models
▼ Show Universal Parts ▼
The names Honda, Yamaha, Kawasaki, Suzuki and any other trade names or symbols belonging to each respective corporation are stated for reference purposes only. The products on this site are after market (not OEM) replacement parts and accessories only. We have no relationship to the listed companies.