HondaCL360 ► 

Honda CL360 Honda OEM Type Grips
US$ 15.00
Fits: CL360 (74-75)

Honda OEM Type Grips

#02-2423 | Honda CL360 (1974-1975)

Honda OEM Type Rubber Grips - Black - Closed end type for 7/8" bars. These are replica's of the original type grips from the factory. Replaces OEM#'s 53165-342-670, 53166-342-670.

Honda CL360 Throttle Sleeve
US$ 15.00
Fits: CL360 (74)

Throttle Sleeve

#02-2462 | Honda CL360 (1974)

Nylon Throttle Sleeve - Replaces OEM# 53141-300-010.

Honda CL360 Kickstart Rubber
US$ 2.50
Fits: CL360 (74)

Kickstart Rubber

#02-2476 | Honda CL360 (1974)

Kickstart Rubber OEM Ref#28311-329-000

Honda CL360 Gear Change Rubber
US$ 2.50
Fits: CL360 (74-75)

Gear Change Rubber

#02-2478 | Honda CL360 (1974-1975)

Gear Change Rubber OEM Ref#95011-400-000

Honda CL360 Side Stand Rubber
US$ 7.00
Fits: CL360 (75)

Side Stand Rubber

#02-6537 | Honda CL360 (1975)

Side Stand Rubber Cushion. Replaces OEM# 50548-356-700.

Honda CL360 Turn Signal Replacement Lens
US$ 3.00
Fits: CL360 (74)

Turn Signal Replacement Lens

#11-2110 | Honda CL360 (1974)

Turn Signal Replacement Lens (Amber) - Front or Rear OEM Ref#33402-268-671

Honda CL360 Tail Light Lens
US$ 14.00
Fits: CL360 (74-75)

Tail Light Lens

#11-2259 | Honda CL360 (1974-1975)

Tail Light Lens OEM Ref#33702-341-671

Honda CL360 Rear Signal Lamp Stay
US$ 11.00
Fits: CL360 (74)

Rear Signal Lamp Stay

#11-2318 | Honda CL360 (1974)

Rear Signal Lamp Stay - Chrome Rear type - OEM Ref. #33441-369-000 125mm Long.

Honda CL360 Front Stop Switch
US$ 6.00
Fits: CL360 (74)

Front Stop Switch

#12-0010 | Honda CL360 (1974)

Front Stop Switch & Safety Starter Switch OEM Ref#35340-329-003, 35340-102-003, 35340-401-682, 35340-329-000, 35340-086-721.

Honda CL360 Exhaust Gasket Pk/10
US$ 16.00
Fits: CL360 (74-75)

Exhaust Gasket Pk/10

#17-3811 | Honda CL360 (1974-1975)

Exhaust Gasket Pk/10 OEM Ref#18291-286-000, 18291-286-306

Honda CL360 Engine Gasket Set
US$ 47.00
Fits: CL360 (73-77)

Engine Gasket Set

#18-0189 | Honda CL360 (1973-1977)

Complete Engine Gasket Set Includes ALL Engine Gaskets High Quality - Made In Italy

Honda CL360 Gas Cap Rubber Seal
US$ 7.00
Fits: CL360 (75)

Gas Cap Rubber Seal

#20-0039 | Honda CL360 (1975)

Gas Cap Rubber Seal, Replaces OEM#17534-323-300.

Honda CL360 Condenser
US$ 18.00
Fits: CL360 (74-75)

Condenser

#26-5107 | Honda CL360 (1974-1975)

Condenser OEM Ref#30250-369-004/3

Honda CL360 Brake Rod Spring
US$ 2.95
Fits: CL360 (74)

Brake Rod Spring

#29-7006 | Honda CL360 (1974)

Brake Rod Spring. Replaces OEM# 95014-73100.

Honda CL360 Flange Knock Bolt (Set/2)
US$ 3.00
Fits: CL360 (74)

Flange Knock Bolt (Set/2)

#29-7019 | Honda CL360 (1974)

Flange Knock Bolt (Set/2). These Bolts Fasten to the Cam Sprocket. Replaces OEM# 90082-HA0-000.

Honda CL360 Clutch Center Nut Removal Tool
US$ 25.00
Fits: CL360 (74)

Clutch Center Nut Removal Tool

#35-0076 | Honda CL360 (1974)

Clutch Center Nut Removal Tool, The perfect tool for easier removal/fitting, without damaging the special locking nut. Both ends with 1/2 drive extension bar, Diameter 20 x 24.

Honda CL360 Clutch Spring Set
US$ 17.50
Fits: CL360 (74-75)

Clutch Spring Set

#39-1047 | Honda CL360 (1974-1975)

Clutch Spring Set

Honda CL360 Float Needle & Seat
US$ 9.00
Fits: CL360 (74-75)

Float Needle & Seat

#48-1520 | Honda CL360 (1974-1975)

Float Needle & Seat High Quality - Made In Japan OEM Ref#16011-369-004

Honda CL360 Float Bowl Drain Screw
US$ 4.95
Fits: CL360 (74-77)

Float Bowl Drain Screw

#48-5041 | Honda CL360 (1974-1977)

Float Bowl Drain Screw w O-Ring. Note: We sell these each, order the quantity you require

Honda CL360 Air Screw Needle O-Ring
US$ 1.95
Fits: Listed Models

Air Screw Needle O-Ring

#48-5043 | Honda CL360 (1974), CL360 (1975)

Air Screw Needle O-Ring. 2.8mm x 1.2mm. Note: sold each, order the quantity you require

Honda CL360 Shock Absorber Nut
US$ 3.00
Fits: Listed Models

Shock Absorber Nut

#49-0779 | Honda CL360 (1974), CL360 (1975)

Shock Absorber Nut, Used when Installing Shocks. Replaces OEM# 90309-315-000. Note: Nuts sold Each, order the quantity you require

Honda CL360 Front Sprocket Lock Plate Set
US$ 6.00
Fits: CL360 (74-75)

Front Sprocket Lock Plate Set

#49-0782 | Honda CL360 (1974-1975)

Front Sprocket Lock Plate with 2 Lock Plate Bolts. It's Always good to replace these when installing a new front sprocket. Replaces OEM#23811-292-000 (Plate) and OEM#92101-06016-0A (Bolts) X2.

Honda CL360 Tappet Adjuster Screw & Nut Set
US$ 4.50
Fits: CL360 (74-75)

Tappet Adjuster Screw & Nut Set

#49-0784 | Honda CL360 (1974-1975)

Tappet Adjuster Screw & Nut Set. Each Set includes one Tappet Adjuster Screw and one Nut. Replaces OEM#90012-426-000 (Adjuster), OEM#90206-250-000 (Nut). Note: Order the Quantity of Sets your Bike Requires

Honda CL360 Steering Stem Nut
US$ 11.95
Fits: CL360 (74)

Steering Stem Nut

#49-0786 | Honda CL360 (1974)

Chrome Steering Stem Nut, Hex Nut Size 30mm. Replaces OEM#90304-415-000. Note: Sold Each, order the quantity your require

Honda CL360 Steering Stem Washer
US$ 3.25
Fits: CL360 (74)

Steering Stem Washer

#49-0787 | Honda CL360 (1974)

Chrome Steering Stem Washer, Replaces OEM#90503-283-000. Sold Each, order the quantity you require.

Honda CL360 Side Stand Spring
US$ 4.50
Fits: CL360 (74-75)

Side Stand Spring

#49-0788 | Honda CL360 (1974-1975)

Side Stand Spring, Replaces OEM#95014-72402.

Honda CL360 Fork Cap O-Ring Set/2
US$ 2.50
Fits: CL360 (74-75)

Fork Cap O-Ring Set/2

#49-0790 | Honda CL360 (1974-1975)

Fork Cap O-Ring Set of 2. 23mm x 2.8mm size. Replaces OEM#94608-50000 X2.

Honda CL360 Tachometer Cable
US$ 13.00
Fits: CL360 (74-75)

Tachometer Cable

#51-2401 | Honda CL360 (1974-1975)

Tachometer Cable - Black - OEM Ref. # 37260-149-000 (700mm), 37260-KB7-010, 37250-149-000 Made in Japan

Honda CL360 Starter Motor Terminal Rubber Boot
US$ 4.50
Fits: CL360 (74)

Starter Motor Terminal Rubber Boot

#73-0092 | Honda CL360 (1974)

Starter Motor Terminal (Cover) Rubber Boot. Replaces OEM#32411-230-000.

Honda CL360 Shock Absorber Joint Rubber Set/2
US$ 6.50
Fits: CL360 (74)

Shock Absorber Joint Rubber Set/2

#73-0093 | Honda CL360 (1974)

Shock Absorber Joint Rubber Set/2. Replaces OEM#52484-292-000.

Honda CL360 Washer
US$ 4.50
Fits: CL360 (74)

Washer

#73-0839 | Honda CL360 (1974)

Washer, 16mm Size, Replaces OEM#90431-292-000.

Honda CL360 Turn Signal Pinch Bolt Set
US$ 4.50
Fits: CL360 (74-76)

Turn Signal Pinch Bolt Set

#73-0840 | Honda CL360 (1974-1976)

Turn Signal Pinch Bolt Set. Includes 2X Chrome Bolts, 2X Hex Nuts and 4X Flat Washers. This set is used to clamp the turn signal onto the stem. Some models originally had a 25mm long bolt but these will interchange. This set includes hardware for 2 turn signals. If you need enough for all 4 signals please purchase 2 sets.

Honda CL360 Brake Rod Joint
US$ 2.00
Fits: CL360 (74)

Brake Rod Joint

#73-0843 | Honda CL360 (1974)

Brake Rod/Arm Joint, Replaces OEM#95015-32001.

Honda CL360 Throttle Adjusting Bolt
US$ 7.00
Fits: CL360 (74)

Throttle Adjusting Bolt

#73-0846 | Honda CL360 (1974)

Throttle Adjusting Bolt, Replaces OEM# 53190-300-000.

Honda CL360 Throttle Adjusting Spring
US$ 7.00
Fits: CL360 (74)

Throttle Adjusting Spring

#73-0847 | Honda CL360 (1974)

Throttle Adjusting Spring, Replaces OEM# 53191-300-000.

Honda CL360 Side Stand Pivot Bolt & Nut Set
US$ 4.50
Fits: CL360 (74)

Side Stand Pivot Bolt & Nut Set

#73-0893 | Honda CL360 (1974)

Side Stand Pivot Bolt & Nut Set, This is the Set Used to Fasten the Side Stand in Place. Replaces OEM# 90108-283-000 (Bolt) and 94002-10000-0S (Nut).

Honda CL360 Valve Guide Clip
US$ 2.00
Fits: CL360 (74)

Valve Guide Clip

#73-0939 | Honda CL360 (1974)

Valve Guide Clip, Replaces OEM#12211-250-310. Sold Each, Order the Quantity you Require

Honda CL360 Grease Fitting Nipple (Pk/2)
US$ 6.00
Fits: CL360 (74)

Grease Fitting Nipple (Pk/2)

#73-0941 | Honda CL360 (1974)

Grease Fitting Nipple A .45 (Pk/2). Replaces OEM# 96201-30001.

Honda CL360 Side Cover Emblem Fixing Nut Pk/2
US$ 4.00
Fits: CL360 (74)

Side Cover Emblem Fixing Nut Pk/2

#73-0944 | Honda CL360 (1974)

Side Cover Emblem Fixing Nut (3mm) Pk/2, Used to Attach the Side Cover Emblems. Replaces OEM#90313-567-000. Check your bike to see the quantity you require

Honda CL360 Handlebar Clutch Lever Pivot Bolt & Nut Set
US$ 4.00
Fits: CL360 (74)

Handlebar Clutch Lever Pivot Bolt & Nut Set

#73-0996 | Honda CL360 (1974)

Handlebar Clutch Lever Pivot Bolt & Nut Set. This is the Set that Fastens the Clutch Lever in Place. Includes One Bolt with One Nut. Replaces OEM# 90114-310-000 (Bolt) and OEM# 94001-06200-0S (Nut).

Honda CL360 Custom Drive Chain Adjuster Screws ~ Black ~ Joker Machine
US$ 40.00
Fits: CL360 (74)

Custom Drive Chain Adjuster Screws ~ Black ~ Joker Machine

#73-1059 | Honda CL360 (1974)

Joker Machine Brand ~ Black Custom Type Drive Chain Adjuster Screws (Set of 2) with Gold Cadium Plated Nuts. Replace OEM# 90119-283-000. Features a CNC Machined Knob Section with 3 methods of Adjusting (By Hand with the Knurled Section, With an Open or Box Wrench on the Hex or with an Allen Wrench through the End of the Knob to the Screw). These Adjuster Screws Look Very Sharp and Improve the Look of your Bike. High Quality Made in the U.S.A.

Honda CL360 Custom Drive Chain Adjuster Screws ~ Silver ~ Joker Machine
US$ 40.00
Fits: CL360 (74)

Custom Drive Chain Adjuster Screws ~ Silver ~ Joker Machine

#73-1060 | Honda CL360 (1974)

Joker Machine Brand ~ Silver Custom Type Drive Chain Adjuster Screws (Set of 2) with Gold Cadium Plated Nuts. Replace OEM# 90119-283-000. Features a CNC Machined Knob Section with 3 methods of Adjusting (By Hand with the Knurled Section, With an Open or Box Wrench on the Hex or with an Allen Wrench through the End of the Knob to the Screw). These Adjuster Screws Look Very Sharp and Improve the Look of your Bike. High Quality Made in the U.S.A.

Honda CL360 Universal Glas-Pak Insert
US$ 25.00

Universal Glas-Pak Insert

#009-0317

Universal Glas-Pak Insert - 1 1/2" Pipes Tone down your TT or Drag Pipes

Honda CL360 Tire Valve Stem
US$ 5.50

Tire Valve Stem

#01-0166

Tire Valve Stem - Straight Metal Type

Honda CL360 Tire Valve Stem
US$ 2.50

Tire Valve Stem

#01-0167

Tire Valve Stem - Straight Rubber Type

Honda CL360 Tire Valve Stem
US$ 4.00

Tire Valve Stem

#01-0168

Tire Valve Stem Metal Type

Honda CL360 Tire Valve Stem
US$ 3.50

Tire Valve Stem

#01-0169

Tire Valve Stem - 90 Degree Metal Type

Honda CL360 Tire Valve Stem Caps
US$ 6.00

Tire Valve Stem Caps

#01-0170

Tire Valve Stem Caps - Pk/10 Metal Caps with Core Removal Notch Built In

Honda CL360 Tire Valve Stem Caps
US$ 2.00

Tire Valve Stem Caps

#01-0171

Tire Valve Stem Caps - Pk/2 Metal Caps with Core Removal Notch

Honda CL360 Tire Fill Valve
US$ 5.00

Tire Fill Valve

#01-0173

Ninety Degree Tire Fill Valve

The names Honda, Yamaha, Kawasaki, Suzuki and any other trade names or symbols belonging to each respective corporation are stated for reference purposes only. The products on this site are after market (not OEM) replacement parts and accessories only. We have no relationship to the listed companies.