Honda ► GL1100 ►
-
Here’s our hand-picked list of parts and accessories for your Honda GL1100 with universal parts included that match “cable lube”►
- Honda
Tachometer Cable
Stock Type Tachometer Cable, Replaces OEM # 37260-463-000
Speedometer Cable
Speedometer Cable - Black - OEM Ref. # 44830-425-870 End to End Length 38.5" Made in Japan
Choke Cable
Stock Type Choke Cable, Replaces OEM # 17950-371-010
Negative (-) Battery Cable
Negative (-) Battery Cable (Ground Cable). Replaces OEM # 32601-MG9-000
Starter Solenoid Switch
Starter Solenoid Switch, Four-gang plug and a 30-Amp fuse with cable attachment.
Speedo Gear Plug
Speedo Gear Plug - Plug 15mm Outer Diameter, 22mm Long. This Plug is Great for Keeping your Original Speedo Drive Gear Clean.
Cable Luber
Cable Luber Used on All Cables, Best way to lube & clear cables of moisture & Dirt.
Battery Jumper Cables
Battery Jumper Cables. 6 Feet in Length, These cables feature 10-gauge battery cables and insulated color-coded terminal clamps for safe and secure handling. The smaller clamp size easily fits motorcycle's, ATV's, UTV's, snowmobile's, watercraft's, etc.
Tach/Speedo Cable Extension +6"
Tachometer/Speedometer Cable Extension +6". Use to lengthen any Tach or Speedo Cable on custom bikes requiring a longer cable due to extended forks or non stock instrument placing.
Tach/Speedo Cable Extension +8"
Tachometer/Speedometer Cable Extension +8". Use to lengthen any Tach or Speedo Cable on custom bikes requiring a longer cable due to extended forks or non stock instrument placing.
Black Single Cable Pull Throttle Assembly 1"
Black Single Cable Pull Throttle Assembly For 1" Bars Jackhammer Style 140mm Length Grips Features Tension Adjuster and Built in Cable Adjustment High Quality Black Powder Coated Aluminum Housing and Aluminum Throttle Tube
Black Dual Pull Cable Throttle Assembly 7/8"
Black Dual Pull Cable Throttle Assembly For 7/8" Bars Jackhammer Style 140mm Length Grips Features Tension Adjuster and Built in Cable Adjustment High Quality Black Powder Coated Aluminum Housing and Aluminum Throttle Tube
Push/Pull Style Throttle Assembly
Custom Dual Cable Style (Push/Pull) Throttle Assembly for 7/8" bars. Satin Black Die-Cast aluminum housing with a nylon throttle tube. Housing is threaded to accept Honda push/pull throttle cables. Opens carbs up to 38mm. Allen key included for assembly. Pull cable thread size is M10 x 1.25mm, Push cable thread size is M12 x 1.00mm. Throttle is 6" total in length.
Throttle
Turbo Force Throttle Cable Adjuster With Rubber Adjuster Cover Use to convert ATV thumb throttle to a twist throttle. Fits 7/8" Bars
Brake & Clutch Lever Assemblies
Brake & Clutch Lever Assemblies. Includes both the clutch and brake levers and both perches (brackets). These are universal for 7/8" bars with cable operated drum brakes, and are great for custom projects. Levers do not include mirror attachments points.
Electrical Circuit Tester
Electric Circuit Tester - Checks all motorcycle primary electrical and computer circuits for power. Plastic handle lights up if circuit is good. Icepick type probe and 48" cable with insulated alligator clips.
Universal 1" Push/Pull Harley Style Chrome Twist Grip Throttle
Universal 1" Push/Pull Harley Style Chrome Twist Grip Throttle Assembly. Chromed aluminum housing with plastic throttle tube, pre-installed throttle assembly grip. Throttle is 5 1/4" long over all. Throttle tube is 4" long. Housing is 2" in diameter. Fits: 1" handle bars. For use with dual cable set ups.
Brake & Clutch Lever Assemblies ~ Silver
Brake & Clutch Lever Assemblies ~ Silver. Includes both the clutch and brake levers and both perches (brackets). Styled after the Honda Stock type controls. These are universal for 7/8" bars, and are great for custom projects. One piece brackets with 10mm RH Thread mirror mount holes. The lever perch accepts the factory style brake switch. Note: Make sure you have 7/8" handelbars and you are using a cable operated clutch and front brake. This is a universal part and some mods may have to be made to work with your bike.
Brake & Clutch Lever Assemblies ~ Black
Brake & Clutch Lever Assemblies ~ Black. Includes both the clutch and brake levers and both perches (brackets). Styled after the Honda Stock type controls. These are universal for 7/8" bars, and are great for custom projects. One piece brackets with 10mm RH Thread mirror mount holes. The lever perch accepts the factory style brake switch. Note: Make sure you have 7/8" handelbars and you are using a cable operated clutch and front brake. This is a universal part and some mods may have to be made to work with your bike.
Brake Free LED Helmet Brake Light Set (As Seen on Shark Tank)
Brake Free is an ultra-bright smart LED brake light for your motorcycle helmet that instantly improves your visibility. No apps or wires needed, just mount it to your helmet and go! Comes with everything you need - universal and XL helmet mounts, micro USB charging cable, quick start guide, and more. This amazing product lights up as soon as it detects a slowdown. Without connecting to the bike it detects engine braking, regular braking, and emergency braking via the combination of accelerometer and gyrometer sensors inside the unit. The 100 super bright LED's on this unit are right at eye level for car and truck drivers so it increases bike safety immensely! Features a long 8+ hour battery life for continuous riding. Buy today for the safest ride out there. The Brake Free fits helmet sizes XS to XXL, matte and gloss finish, full face, 3/4 and half helmets. We fit-tested Brake Free on race helmets, street helmets, touring helmets, adventure helmets, modular helmets, and even some skateboard and bike helmets. A smarter way to be seen!