Yamaha ► DT175MX ►
-
Here’s our hand-picked list of engine parts for your Yamaha DT175MX with universal parts included►
- Yamaha

Engine Gasket Set
Complete Engine Gasket Set Includes ALL Engine Gaskets High Quality - Made In Italy

Universal Glas-Pak Insert
Universal Glas-Pak Insert - 1 1/2" Pipes Tone down your TT or Drag Pipes

Three Bond # 1184
Gasket Cement - Three Bond #1184 - 100 gram tube - Gray semi-drying type. Use on gaskets except head gasket and on all surfaces without gaskets.

Autosol Chrome Polish (R)
3.33 oz. (75 ml) tube of Autosol Metal Polish. Cleans, polishes, protects and removes corrosion. For all metal parts-chrome, brass, copper, nickel, stainless steel & aluminum. Made in Germany since 1929. "A product that is superior to anything else available"

Flat Black Tapered Muffler
Flat Black Tapered Muffler Overall length 16.25", Inlet ID: 1-3/4" Or 1-1/2" if you use the included reducer shims. Comes with slide mounting bracket. High quality construction with a non removable mechanical baffle. Can be used on the left or right side. Sold Each

Black Shorty Muffler
Black Shorty Muffler. Super compact design 12" Long, Fits 1 1/2" or 1 3/4" headpipes. Complete with mounting hardware, Friction fit and cannot use clamps. The mounting bracket will hold it in place. Removable glass packed baffle. Mounts on left, or right side. Sold Each

Chrome Shorty Muffler
Chrome Shorty Muffler. Super compact design 12" Long, Fits 1 1/2" or 1 3/4" headpipes. Complete with mounting hardware, Friction fit and cannot use clamps. The mounting bracket will hold it in place. Removable glass packed baffle. Mounts on left, or right side. Sold Each

Chrome Reverse Cone Muffler
Chrome Reverse Cone 17" Shorty Muffler High quality construction and finish. Mounting clamp and slide bracket included. Reducer shims included for other fitment sizes. This Muffler will fit head pipes with outer diameters of 1 1/2", 1 5/8" or 1 3/4". Fits on either left or right side. Removable re packable fiberglass baffle. Sold Each

Flat Black Muffler
Flat Black Muffler 19" Length with a 1 3/4" inlet (1 1/2" and 1 5/8" reducer kit included), Straight through perforated core type non removable baffle. Includes mounting clamp and universal style hanger that is used with slotted channel on backside of muffler for left or right side use. Sold each

Chrome Upswept Muffler Extension Set
Chrome upswept muffler Extension Set. These are made specifically for Triumphs but they're perfect for adapting any straight mufflers to upswept mufflers. Check the dimensions to see if they'll work on your project. Constructed of 18 gauge chromed steel and slips on stock header pipes to allow mufflers with 1 1/2" to be easily mounted. Adapters allow mounting of "classic" Triumph TR6/T120 63-70 mufflers on Hinkley Bonneville models for a classic look. Sold as a set of 2. Dimensions: Total Length = 7" Short Side = 1 1/2" OD - 1 3/8" ID Long Side = 1 5/8" OD x 1 9/16" ID Angle = 30 Degrees

Die Cast mount Crankcase Breather
Chrome Breather Filter with Die cast Mount Bracket and Filter Cap.

Band Clamp 45-47mm.
Universal Band Clamp for Carb Holders or Air Boxes Fits: Diameters 45-47mm.

Band Clamp 50-52mm.
Universal Band Clamp for Carb Holders or Air Boxes Fits: Diameters 50-52mm.

Band Clamp 58-60mm.
Universal Band Clamp for Carb Holders or Air Boxes Fits: Diameters 58-60mm.

Cylinder Stud Installation Tool Set
3 Piece Cylinder Stud Installation Tool Set. Installs studs without damaging the threads. Steel construction with black oxide finish for longer tool life. Includes M6 x 1.00, M8 x 1.25 and M10 x 1.25 stud installers. Hex head is 19mm.

Permatex Valve Lapping Paste
Valve Lapping Paste - Permatex Aids valve grinding and seating operations to remove burrs, surface defects, carbon and corrosion. Mixes with water to form an easy to use paste.

Piston Ring Tool
Piston Ring Tool with plastic storage case. This tool is designed to prevent ring breakage during cylinder installation. This tool can be easily removed after cylinder is in position. Comes with 4 rings to accept the smallest triple to the largest single cylinder engines. Fits 40-85mm sizes.

Fluid Hose Clamp
Fluid Hose Clamp, all steel construction with adjustable locking collar. Completely or partially closes flexible brake, fuel, and vacuum fluid lines.

Portable Auxiliary Fuel Tank Tool
Portable Auxiliary Fuel Tank, for Non Fuel Injection Systems. Includes 4 Feet of 1/4" fuel line and an inline fuel valve with 1/4" inlet and outlet. Fuel capacity 2 Litres. For use when tuning a motorcycle with the gas tank removed. Note: This tool is not to be used for long term fuel storage, for safety and to prevent accidental spillage, immediately drain gas back to approved long term storage container after use.

Bearing Packer
Wheel Bearing Grease Packer. To pack a bearing, place the bearing on the piston, press down on the cap until the old grease is forced out and the new grease shows on top of the bearing. Grease stays in the tool cavity, not on your hands. Transparent, impact resistant cup allows easy grease level checks. Works on bearings up to 3-1/2" OD or 89mm.