Search ►
Honda OEM Type Grips
Honda OEM Type Rubber Grip Set - Black - Closed end type for 7/8" bars. These are replica's of the original type grips from the factory. 130mm Length. Replaces OEM #' 53165-390-780 / 53166-390-780 / 53166-422-000 / 53165-422-000
Honda OEM Type Grips
Honda OEM Type Rubber Grip Set - Black - Closed end type for 7/8" bars. These are replica's of the original type grips from the factory. 135mm Length. Replaces OEM #' 53165-342-670 / 53166-342-670
Honda OEM Type Grips
Honda OEM Type Rubber Grip Set - Black - Closed end type for 7/8" bars. These are replica's of the original type grips from the factory. 130mm Length. Replaces OEM #' 95011-14100 / 95011-14200
Honda OEM Type Grips ~ Open End
Honda OEM Type Rubber Grips - Black - Open End Type with End Plugs Included - For 7/8" bars. These are replica's of the original type grips from the factory. 130mm Length. Replaces OEM #' 53165-390-780 / 53166-390-780 / 53166-422-000 / 53165-422-000
Honda GL1000 Goldwing 1978-79 Replica Handlebar
Honda GL1000 Goldwing 1978-79 Replica Handlebar. Replaces OEM # 53100-431-780 / 53100-431-670 Thickness - 7/8" - 22mm, Length - 32 1/4" - 820mm, Pull Back - 7 3/4" - 196mm, Inner Rise - 9" - 228mm, End Rise - 10" - 254mm, Center Width - 6 1/2" - 165mm, Base Width - 10 1/2" - 266mm, Knurl Width - 4 1/2" - 114mm, Control Length - 9" - 228mm, Drilled NO There are Holes For Switch Positioning.
Honda GL1000 Goldwing 1977 Replica Handlebar
Honda GL1000 Goldwing 1977 and GL1000L 1976 Replica Handlebar. Replaces OEM # 53100-371-980 / 53100-371-660 Thickness - 7/8" - 22mm, Length - 32 3/8" - 822mm, Pull Back - 8" - 203mm, Inner Rise - 8 3/4" - 222mm, End Rise - 9 3/4" - 248mm, Center Width - 6 1/2" - 165mm, Base Width - 10 1/2" - 266mm, Knurl Width - 4 1/2" - 114mm, Control Length - 10 1/4" - 260mm, Drilled YES There are Holes For Internal Wiring and Switch Positioning
Honda GL1100 Goldwing 1980-83 Replica Handlebar
Honda GL1100 Goldwing 1980-83 Replica Handlebar. Replaces OEM # 53100-MB9-800 / 53100-MB9-670 / 53100-463-670 Thickness - 7/8" - 22mm Length - 32 1/8" - 820mm Pull Back - 10" - 254mm Inner Rise - 8 3/4" - 222mm End Rise - 10" - 254mm Center Width - 6 1/2" - 165mm Base Width - 9 1/2" - 241mm Knurl Width - 4 1/2" - 114mm Control Length - 10 1/2" - 266mm Drilled NO There are Holes For Switch Positioning
Throttle Sleeeve
Throttle Sleeve
Handlebar Rubber Cover Set/2
Handlebar Rubber Cover Set/2 - Replaces OEM# 53176-329-000 (Right Side), 53179-329-000 (Left Side) One rubber for the left and one for the right side per set.
Handlebar Clamp Hardware Set
Handlebar Clamp Hardware Set. Set Includes 4 Chrome Plated Bolts and 4 Washers. This Hardware Set is for the Stock Type Clamp (Holder) that Attaches Over the Handlebar. Replaces OEM # 93101-08040-0B X4 (Bolts) and 90518-921-000 X4 (Washers). Fits: Stock Type Handlebar Clamps on the Honda CB750K (1969-75)
Throttle Cable "A" - Pull
Throttle Cable "A" - Pull Type Replaces OEM# 17910-371-000 / 17910-371-000
Handlebar Switch Kill Switch Cover
Handlebar Switch Kill Switch Chrome Plastic Cover. This cover will pop over your kill switch button and greatly improves the look of the handlebar switch.
Handlebar Clamp Hardware Set
Handlebar Clamp Hardware Set. This Hardware Set is for the Stock Type Clamp (Holder) that Attaches Over the Handlebar. Includes the 4 Bolts that Fasten the Handlebar Clamp in Place and 4 Covers that Snap into the Screw Tops to Give it a Super Clean Look! Replaces OEM# 91456-371-770 X4, 90185-371-000 X4
Handlebar End Cap Set
Chrome Handlebar End Cap Set. Includes Left and Right Sides with Bolts.
Bar Switch Assembly - Right (Brake) Side
Bar Switch Assembly ~ Right (Brake) Side. Replaces OEM # 35300-319-670
Handlebar Clamp Set /2
Black Handlebar Clamp Set/2. These clamp the stock 7/8" handlebars to the upper triple clamp. Replaces OEM # 95014-22200
Bar Switch Assembly ~ Left (Clutch) Side
Bar Switch Assembly ~ Left (Clutch) Side - Black. Replaces OEM # 35250-300-033
Glove Box/Fairing Pocket Cover GL1200 1984-87
Replacement Glove Box/Fairing Pocket Cover. Each cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available.
Stock Type Grip Set
Stock Type Grip Set, Replaces OEM#53165-430-000 / 53166-430-030 / 53165-GFW-305 / 53166-GFW-305 / 53165-KS3-900 / 53166-KS3-900 Length 114mm Some of these bikes had 2 styles of grips, both will work but ensure this is the style you would like before you purchase
Bar Switch Assembly ~ Right (Brake) Side
Bar Switch Assembly ~ Right (Brake) Side - Black. Replaces OEM # 35130-404-671
Bar Switch Assembly ~ Right (Brake) Side
Bar Switch Assembly ~ Right (Brake) Side - Black. Replaces OEM # 35300-323-671
Bar Switch Assembly ~ Left (Clutch) Side
Bar Switch Assembly ~ Left (Clutch) Side - Black. Replaces OEM # 35200-460-671 / 35200-425-672 / 35200-445-671
Bar Switch Assembly ~ Left (Clutch) Side
European Version (8 Wire) Bar Switch Assembly ~ Left (Clutch) Side - Black. Please be sure to double check your harness requires this 8 wire type switch Before ordering. Replaces OEM # 35200-377-671 Note: Wiring to be run Inside the handlebar.
Handlebar - Stock Type ~ CB750K 1973-76 / CB750F 1975-76
Stock Type Handlebar for the CB750K (1973-76), CB750F (1975-76) - Chrome. Drilled for wires like the OEM type. Bar Diameter - 7/8" - 22mm, Length - 32" - 812mm, Pull Back - 5 1/4" - 133mm, Inner Rise - 6 1/2" - 165mm, End Rise - 8" - 203mm, Center Width - 6 1/2" - 165mm, Base Width - 9 1/2" - 241mm, Knurl Width - 4 1/2" - 114mm, Control Length - 9" - 228mm, Drilled - YES Replaces OEM # 53100-341-700 Note: These Are Drilled For Wires
Bar Switch Assembly ~ Right (Brake) Side
Bar Switch Assembly ~ Right (Brake) Side - Black. Replaces OEM # 35130-461-770 / 35130-463-670 / 35130-461-770
Handlebar Rubber Cover Set/2
Handlebar Rubber Cover Set/2 - Replaces OEM# 53177-430-000 / 53176-428-010 One rubber for the left and one for the right side per set.
Bar Switch Assembly ~ Left (Clutch) Side
Bar Switch Assembly ~ Left (Clutch) Side - Polished. Replaces OEM # 35300-107-671 Note: Wiring to be run Inside the handlebar.
Bar Switch Assembly ~ Right (Brake) Side
Bar Switch Assembly ~ Right (Brake) Side - Black. Replaces OEM # 35300-300-672 Note: Wiring to be run Inside the handlebar. This is a single throttle cable configuration type assembly.
Bar Switch Assembly ~ Left (Clutch) Side
Bar Switch Assembly ~ Left (Clutch) Side - Black. Replaces OEM # 35200-410-671
Handlebar - Stock Type ~ CB550F 1975-76
Stock Type Handlebar for the CB550F (1975-76) - Chrome. The holes are pre-cut for routing the wiring from the switches to the harness. There are also holes drilled to fit the pins in the stock switches to keep them from rotating. Bar Diameter - 7/8" - 22mm, Length - 28 1/4" - 718mm, Pull Back - 3 3/4" - 95mm, Inner Rise - 3 3/8" - 86mm, End Rise - 4 1/2" - 114mm, Center Width - 5 1/4" - 133mm, Base Width - 7 1/2" - 190mm, Knurl Width - 4 1/2" - 114mm, Control Length - 8" - 203mm, Drilled - YES Replaces OEM # 53100-390-620 Note: These Are Drilled For Wires
Handlebar - Stock Type ~ CB400F 1975-76
Stock Type Handlebar for the CB400F (1975-76) - Chrome. The holes are pre-cut for routing the wiring from the switches to the harness. There are also holes drilled to fit the pins in the stock switches to keep them from rotating. Bar Diameter - 7/8" - 22mm Length - 27 1/4" - 692mm Pull Back - 3 1/2" - 89mm Inner Rise - 2 1/4" - 57mm End Rise - 3 1/4" - 82mm Center Width - 5 1/4" - 133mm Base Width - 7" - 178mm Knurl Width - 4 1/2" - 114mm Control Length - 8 1/2" - 216mm Drilled - YES Replaces OEM # 53100-377-000 Note: These Are Drilled For Wires
Handlebar - Stock Type ~ CB750K 1977-78
Stock Type Handlebar for the CB750K (1977-78) - Chrome. Bars are not drilled for wires. Bar Diameter - 7/8" - 22mm, Length - 31" - 787mm, Pull Back - 5 1/4" - 133mm, Inner Rise - 7" - 178mm, End Rise - 9" - 228mm, Center Width - 6" - 152mm, Base Width - 9 1/2" - 241mm, Knurl Width - 4 1/2" - 114mm, Control Length - 8 1/2" - 216mm, Drilled - YES Replaces OEM # 53100-405-010
Bar Switch Assembly ~ Left (Clutch) Side
Bar Switch Assembly ~ Left (Clutch) Side - Black. Replaces OEM # 35250-341-672
Bar Switch Assembly ~ Left (Clutch) Side
Bar Switch Assembly ~ Left (Clutch) Side - Black. Replaces OEM # 35200-404-671 Note: This handlebar switch assembly requires the wires to be run inside the handlebar
Handlebar - Stock Type ~ CB750 1972
Stock Type Handlebar for the CB750K (1972) - Chrome. Drilled for wires like the OEM type. Bar Diameter - 7/8" - 22mm, Length - 28 1/2" - 648mm, Pull Back - 4" - 101mm, Inner Rise - 3 1/8" - 79mm, End Rise - 3" - 76mm, Center Width - 5 1/2" - 140mm, Base Width - 7 1/2" - 190mm, Knurl Width - 4 1/2" - 114mm, Control Length - 8" - 203mm, Drilled - YES Replaces OEM # 53100-341-000 Note: These Are Drilled For Wires
Bar Switch Assembly ~ Right (Brake) Side
Bar Switch Assembly ~ Right (Brake) Side - Black. Replaces OEM # 35300-341-671
Handlebar - Stock Type ~ CB750 1969-71
Stock Type Handlebar for the CB750K (1969-71) - Chrome. Drilled for wires like the OEM type. Bar Diameter - 7/8" - 22mm, Length - 32" - 812mm, Pull Back - 5 3/8" - 136mm, Inner Rise - 5 1/4" - 133mm, End Rise - 6 7/8" - 175mm, Center Width - 6 1/2" - 165mm, Base Width - 9 1/2" - 241mm, Knurl Width - 4 1/2" - 114mm, Control Length - 9" - 228mm, Drilled - YES Replaces OEM # 53100-300-000 Note: These Are Drilled For Wires
Pilot Lamp Indicator Panel Dash Light Harness
Pilot Lamp Indicator Panel Dash Light Harness, Replaces OEM# 37581-323-000 / 37581-374-670 Comes complete with bulbs.
Bar Switch Assembly ~ Left (Clutch) Side
Bar Switch Assembly ~ Left (Clutch) Side - Black. Replaces OEM # 35200-374-671
Handlebar Steering Lock
Handlebar Steering Lock/Fork Lock with Keys, Replaces OEM# 53600-086-007
Throttle Sleeve
Nylon Throttle Sleeve - Replaces OEM # 53141-300-010
Throttle Sleeve
Throttle Sleeve
Honda Handlebar Pad
Honda Handlebar Pad Protect your chest and spruce up the look of your bike with a brand new handlebar pad. These will fit to 1/8" and 7/8" bars.
Handlebar End Plugs
Aluminum End Plugs Honda CBR
Handlebar End Plugs
Aluminum End Plugs Honda / Suzuki / Kawasaki
Push/Pull Style Throttle Assembly
Custom Dual Cable Style (Push/Pull) Throttle Assembly for 7/8" bars. Satin Black Die-Cast aluminum housing with a nylon throttle tube. Housing is threaded to accept Honda push/pull throttle cables. Opens carbs up to 38mm. Allen key included for assembly. Pull cable thread size is M10 x 1.25mm, Push cable thread size is M12 x 1.00mm. Throttle is 6" total in length.