Search ► 

Refine Search Results
  Front Fork Top Bridge / Triple Tree Washer Kit
USD$ 8.10
Listed Models

Front Fork Top Bridge / Triple Tree Washer Kit

#73-0833 | Honda CB350G (1973), CB350K (1972), CB450K (1970-1974), CB500K (1971-1973), CB550F (1975-1976), CB550K (1974-1975), CB750F (1975-1976), CB750K (1969-1975), CL350K (1972-1973), CL450K (1972), More...

Front Fork Top Bridge / Triple Tree Washer Kit of 2 Washers. These washers are needed in order to avoid broken top triple trees when you tighten up your fork tube clamps. Replace # OEM 53235-300-000

USD$ 8.10
Listed Models
  Fork Internal Circlip Set
USD$ 5.15
Listed Models

Fork Internal Circlip Set

#73-1036 | Honda CB450K (1970-1971), CB750K (1971-1972)

Fork Internal Circlip (50mm) Set/2, Replaces OEM # 94521-50000 Fits: Honda CB750K (1971), CB750K (1972) Frame Numbers Lower then #2093731 Only

USD$ 5.15
Listed Models
  Fork Tube Set
USD$ 125.75
Listed Models

Fork Tube Set

#73-1148 | Honda CB750K (1972-1978), CB750F (1977-1978), CB750A (1976-1978)

Fork Tube Set/2, Length (580mm or 22 13/16"), 35mm OD. Fits: Honda CB750K (1972) Higher then Frame# 2093730 Only, CB750K (1973-76) NOTE: LENGTH is 22 13/16", one Inch Shorter then Stock Length for these Models below. Fits: Honda CB750K (1977) Higher then Frame# 2707508 Only, CB750K (1978), CB750F (1977-78) Supersport, CB750A (1976-78) Hondamatic Before ordering Please Confirm 22 13/16" is the Length you would like

USD$ 125.75
Listed Models
  Shock Absorber Set ~ Stock Design
USD$ 92.45
Listed Models

Shock Absorber Set ~ Stock Design

#06-3642 | Honda CB350F (1972-1974), CB350K (1972), CB350G (1973), CB500K (1971-1973), CB550K (1974-1976), CB550F (1975-1976), CB450K (1968-1974), CL450 (1967), CL450 (1969-1970)

Stock Type Designed Shock Absorber Set - Chrome Body and Cover with Chrome Springs. These are modelled after the original stock shocks. Replaces OEM# 52400-455-670XW / 52400-390-681XW / 52400-292-670XW / 52400-323-010XW The original OEM shocks came with 3 position spring preload adjustments however we have upgraded these to 5 spring preload adjustments so you can better fine tune these shocks! 321mm (12.6") Center of Eye to Clevis. Fits: Honda CB500K (1971-73), CB550K (1974-76), CB550F (1975-76) Supersport Fits: Honda CB450K (1968-74), CL450 (1967/1969-70) Stock Match for: Honda CB350F (1972-74) Supersport Stock Match for: Honda CB350K (1972)

USD$ 92.45
Listed Models
  Fork Tube Set
USD$ 125.75
Listed Models

Fork Tube Set

#73-1081 | Honda CB750K (1969-1972)

Fork Tube Set/2, Length (585mm or 23"), 35mm OD. Fits: Honda CB750K (1969-71), CB750K (1972) Lower then Frame# 2093730 Only Before ordering Please Confirm 23" is the Length you would like

USD$ 125.75
Listed Models
  Swing Arm Decal Set
USD$ 28.50
Listed Models

Swing Arm Decal Set

#73-0639 | Honda XL250R (1982-1983), XL200R (1984), XL350R (1984), XL500R (1982), XL600R (1983-1984), CR80R (1982)

Honda Swing Arm Decal (Sticker) Set - 2pcs. These reproduction decals will add the finishing touch to your restoration. These decals are no longer available from the manufacturer. All decals are "printed" on the highest quality materials from companies such as 3M and Avery. All decals have a protective coating to resist scratching and to protect colors from UV rays. These decals are adhesive backed for simple application.

USD$ 28.50
Listed Models
  Shock Absorber Set ~ Stock Design ~ CB750K 1969-71
USD$ 140.55
Listed Models

Shock Absorber Set ~ Stock Design ~ CB750K 1969-71

#73-0153 | Honda CB750K (1969-1978), CB750F (1975-1978), CB750A (1976-1978)

Stock Type Designed Shock Absorber Set - Chrome Body with Chrome Springs and Black Center. These are modelled after the original stock shocks made for the CB750K 1969-71. The original OEM shocks came with 3 position spring preload adjustments however we have upgraded these to 5 spring preload adjustments so you can better fine tune these shocks! 336mm (13 1/4") Center of Eye to Eye. Stock Match for: Honda CB750K (1969-71) Will Also Fit: Honda CB750K (1972-78), CB750F (1975-78) Supersport, CB750A (1976-78) Hondamatic

USD$ 140.55
Listed Models
  Shock Absorber Set ~ Stock Design ~ CB750K 1972-76
USD$ 125.75
Listed Models
Out of Stock
Email Me When Available

Shock Absorber Set ~ Stock Design ~ CB750K 1972-76

#73-1055 | Honda CB750K (1969-1978), CB750F (1975-1978), CB750A (1976-1978)

Stock Type Designed Shock Absorber Set - Chrome Body with Chrome Springs and Chrome Center. These are modelled after the original stock shocks made for the CB750K 1972-76. The original OEM shocks came with 3 position spring preload adjustments however we have upgraded these to 5 spring preload adjustments so you can better fine tune these shocks! 336mm (13 1/4") Center of Eye to Clevis. Stock Match for: Honda CB750K (1972-76) Will Also Fit: Honda CB750K (1969-71), CB750F (1975-78) Supersport, CB750A (1976-78) Hondamatic

USD$ 125.75
Listed Models
Out of Stock
Email Me When Available
  Fork Tube Set
USD$ 125.75
Listed Models

Fork Tube Set

#73-1080 | Honda CB750K (1972-1978), CB750F (1977-1978), CB750A (1976-1978)

Fork Tube Set/2, Length (605mm or 23 13/16"), 35mm OD. NOTE: LENGTH is 23 13/16", one Inch Larger then Stock Length for these Models below. Fits: Honda CB750K (1972) Higher then Frame# 2093730 Only, CB750K (1973-76) Also Fits These Models, Confirm the 605mm Length is what you Require Before Ordering Honda CB750K (1977) Higher then Frame# 2707508 Only, CB750K (1978), CB750F (1977-78) Supersport, CB750A (1976-78) Hondamatic Before ordering Please Confirm 23 13/16" or 605mm is the Length you would like

USD$ 125.75
Listed Models
  Fork Cap O-Ring (Set of 2)
USD$ 1.45
Listed Models

Fork Cap O-Ring (Set of 2)

#73-0916 | Honda XR350R (1983-1985), CBR1000F (1987-1988), GL1500 (1988-1990), NT650 (1988-1991), NX650 (1988-1989), CB400F (1989-1990), PC800 (1989-1990), XL600V (1989-1990), CBR1000F (1990-1991), GL1500SE (1990-1991), More...

Fork Cap O-Ring Set of 2. Size 33.2 x 2.4mm. Replaces OEM # 91356-KF0-003

USD$ 1.45
Listed Models
  Fork Seals
USD$ 14.75
Listed Models
Out of Stock
Email Me When Available

Fork Seals

#27-1010 | Honda CR250R (1978-1979), GL1000 (1976-1979), GL1000LTD (1976)

Fork Seals Set/2 37 X 48 X 12.5

USD$ 14.75
Listed Models
Out of Stock
Email Me When Available
  Headlight Reflector Rubber Base
USD$ 11.45
Listed Models

Headlight Reflector Rubber Base

#99-4979 | Honda CB1000C (1983), CB650 (1979-1982), CB650C (1980-1981), CB650SC (1982), CB750F (1979-1982), CB750K (1979-1982), CB750SC (1982-1983), CB900F (1981-1982), CBX (1981-1982), CBX1000 (1981-1982), More...

Headlight Reflector Rubber Base, Replaces OEM# 33743-425-600 This is the rubber base that the headlight reflector attaches to. Sold Each, order the quantity you require

USD$ 11.45
Listed Models
  Fork Seal Stopper Metal Ring Pk/2
USD$ 5.15
Listed Models

Fork Seal Stopper Metal Ring Pk/2

#73-0940 | Honda CB500T (1975-1976), CB550F (1975-1977), CB550K (1977-1978), CB650 (1979-1980), CB650C (1980), CB750A (1976-1978), CB750C (1980), CB750F (1975-1980), CB750K (1977-1980), CB750L (1979), More...

Fork Seal Stopper Metal Ring Pk/2, Replaces OEM # 51447-KL4-951 This is the Metal Ring above the Fork Seal.

USD$ 5.15
Listed Models
  Grease Fitting Nipple (Pk/2)
USD$ 5.15
Listed Models

Grease Fitting Nipple (Pk/2)

#73-0941 | Honda C70 (1972), CA100 (1963), CA102 (1963), CA105T (1963), CA110 (1963), CA160 (1966), CA175 (1968-1969), CA200 (1964), CA72 (1961), CA77 (1961), More...

Grease Fitting Nipple A .45 (Pk/2). Replaces OEM # 96201-30001

USD$ 5.15
Listed Models
  Swing Arm Bushing Set
USD$ 51.75
Listed Models

Swing Arm Bushing Set

#28-1025 | Honda CB500K (1971-1973), CB550K (1974-1975)

Swing Arm Bushing Set/2. OEM Ref # 52108-300-300 Note: These Replace the factory plastic OEM Type Bushings.

USD$ 51.75
Listed Models
  Fork Dust Seals
USD$ 14.75
Listed Models

Fork Dust Seals

#27-1048 | Honda CB650SC (1983-1985), CB1100F (1983), VT750C (1983-1985), VF750F (1983-1985), VF750C (1987-1988), VT800C (1988), CB1000C (1983), CB900F (1981-1982), CBX1050 (1981-1982), CX650C (1983), More...

Fork Dust Seals Set/2 39 X 58 OEM Ref # 91254-463-003

USD$ 14.75
Listed Models
  Steering Bearing Kit
USD$ 46.95
Listed Models

Steering Bearing Kit

#28-2015 | Honda CBX250 (1987), CM250C (1982-1984), CMX250C (1985-1986), Honda - ATV ATC200 (1981-1983), ATC200E (1982-1984), ATC200M (1984-1985), ATC200S (1984-1985), Honda XR200 (1980-1984), Honda - ATV ATC185 (1980), ATC185S (1981-1983), More...

Tapered Roller Steering Bearing Conversion Kit. Superior to OEM quality, 10X the contact area and less flex. Designed as a drop in replacement for the original bearing. Kit is complete with upper and lower tapered bearing races. High quality made in Japan

USD$ 46.95
Listed Models
  Shock Absorber Joint Rubber Set/2
USD$ 4.05
Listed Models

Shock Absorber Joint Rubber Set/2

#73-0093 | Honda CB1000C (1983), CB1100F (1983), CB350 (1968), CB350F (1972-1974), CB350G (1973), CB350K (1970-1972), CB360G (1974), CB360K (1974), CB360T (1975-1976), CB400F (1975-1977), More...

Shock Absorber Joint Rubber Set/2. Replaces OEM # 52484-292-000

USD$ 4.05
Listed Models
  Bronze Thrust Bushing Set/2
USD$ 19.95
Listed Models

Bronze Thrust Bushing Set/2

#73-0883 | Honda CB350F (1972), CB350F (1974), CB450K (1968-1974), CB500K (1971-1973), CB550K (1974-1975), CB750K (1969-1975), CL450 (1967), CL450K (1969-1972), CL450K (1974)

Bronze Thrust Bushing Set/2. Replace the cheaply made, worn-out factory swingarm bushings with a 2-piece set of brand-new bronze thrust bushings. Replaces OEM # 52109-283-300

USD$ 19.95
Listed Models
  Steering Bearing Kit
USD$ 46.95
Listed Models

Steering Bearing Kit

#28-2007 | Honda XR650L (1993-1994), XR600R (1990-1994), XL600R (1983-1987), XL600V (1987), CR500R (1984-1989), XL500R (1982), XR500R (1981-1982), CR480R (1982-1983), XL350R (1984-1986), XR350R (1983-1984), More...

Tapered Roller Steering Bearing Conversion Kit. Superior to OEM quality, 10X the contact area and less flex. Designed as a drop in replacement for the original bearing. Kit is complete with upper and lower tapered bearing races. High quality made in Japan.

USD$ 46.95
Listed Models
  Black Steering Stem Nut ~ Joker Machine
USD$ 33.25
Listed Models

Black Steering Stem Nut ~ Joker Machine

#12-0073 | Honda CB750K (1969-1978), CB350F (1972-1974), CB350F1 (1972-1974), CB350G (1973), CB350K (1968-1973), CL350 (1968-1973), CL350K (1968-1973), SL350 (1969-1973), SL350K (1969-1973), CB360T (1975-1977), More...

Joker Machine Brand ~ Black Steering Stem Nut, Hex Nut Size 30mm. Replaces OEM # 90304-415-000 High quality CNC machined part made in the U.S.A.

USD$ 33.25
Listed Models
  Fork Seals
USD$ 11.80
Listed Models

Fork Seals

#27-1001 | Honda XR200 (1980-1984), CM185 (1978-1979), XR185 (1979), XL100S (1980), CR80R (1982-1983), SL100 (1969-1970), CB125TT (1990), XL125S (1981-1984), CB175K (1969-1973), CL175 (1968-1973), More...

Fork Seals Set/2 31 x 43 x 10

USD$ 11.80
Listed Models
  Billet Aluminum Upper Triple Tree Clamp
USD$ 133.15
Listed Models

Billet Aluminum Upper Triple Tree Clamp

#28-6913 | Honda CB750K (1979-1982), CB500K (1971-1973), CB550K (1974-1978), CB550F (1975-1977)

Custom Billet Aluminum Machined Upper Triple Tree Clamp. This billet triple has 2X 6mm mounting bosses 50mm apart on the underside of the top triple to accommodate various aftermarket and custom designed instrument mounts for your aftermarket gauges. Designed so the top triple has a rounded top edge with a stylish inset and makes an excellent replacement for the stock cast item when using clip-on bars! This piece was designed to make it very easy for the average Cafe builder to modify their motorcycle. Very High quality, machined in North America. Clip on bars not included and your stock bars will NOT mount to this piece.

USD$ 133.15
Listed Models
  Custom Triple Tree Steel Nut ~ Joker Machine
USD$ 33.25
Listed Models
Out of Stock
Email Me When Available

Custom Triple Tree Steel Nut ~ Joker Machine

#12-0071 | Honda CB350 (1968), CB350F (1972-1974), Honda - ATV ATC250R (1981-1982), Honda CB350G (1973), CB350K (1970-1972), CB360G (1974), CB360K (1974), CB360T (1975-1976), CB400F (1975-1977), CB400T (1981), More...

Joker Machine Brand ~ Custom Triple Tree Steel Nut, Replaces OEM # 53220-286-000 High quality CNC machined part made in the U.S.A.

USD$ 33.25
Listed Models
Out of Stock
Email Me When Available
  Swingarm Dust Seal Cap (Set/2)
USD$ 6.60
Listed Models

Swingarm Dust Seal Cap (Set/2)

#29-7024 | Honda CB350F (1972), CB350F1 (1974), CB450K (1968-1973), CB500K (1971-1973), CB500 (1971), CB550K (1974-1975), CB750K (1969-1975), CL450 (1967), CL450K (1969-1972)

Swingarm Dust Seal Metal Cap (Set/2). These Metal Caps go on the Ends of the Swingarm Pivot. Replaces OEM # 52144-283-010 X2

USD$ 6.60
Listed Models
  High Performance Kibblewhite Bronze Swingarm Bushing Set
USD$ 44.35
Listed Models
Out of Stock
Email Me When Available

High Performance Kibblewhite Bronze Swingarm Bushing Set

#28-1038 | Honda CB750K (1976-1979), CBX1050 (1979), XL350K (1976-1978), CB500T (1975-1976), CB550K (1976-1978), CB550F (1975-1977), CB350F (1972), CB350F (1974), CB350F1 (1974), CB360K (1974), More...

High Performance Kibblewhite Bronze Swingarm Bushing Set/2. Replaces OEM# 52108-457-300, 52108-422-300. Made in the USA by Kibblewhite who have been making High Quality Performance parts for 75+ years. Kibblewhite bronze bushings offers increased durability and better fitment then the OEM type bushings.

USD$ 44.35
Listed Models
Out of Stock
Email Me When Available
  Stock Type Front Reflector Rubber Base
USD$ 5.55
Listed Models

Stock Type Front Reflector Rubber Base

#11-2304 | Honda CB750K (1969-1976), CB500K (1971-1973), CB550K (1974-1976), CB450K (1974), CL450K (1967), CL450K (1969-1972), CL450K (1974), CB350F (1972-1974), CB350F1 (1972-1974), CB350K (1968), More...

Stock Type Front Reflector Rubber Base - Replaces OEM# 33743-341-670

USD$ 5.55
Listed Models
  Rear Shock Swingarm Bushing
USD$ 5.95
Listed Models

Rear Shock Swingarm Bushing

#28-1014 | Honda C70 (1972), C70 (1980-1983), C70M (1971), CA105T (1963), CA200 (1964), CM91 (1966), CT110 (1980-1984), CT110 (1986), CT200 (1964), CT90 (1966), More...

Rear Shock Swingarm Bushing, Replaces OEM# 52181-001-300 35mm Long, 23mm OD, 10mm ID. Sold Each, Order the Quantity you Require

USD$ 5.95
Listed Models
  Swingarm Dust Seal Cap (Set/2)
USD$ 11.05
Listed Models

Swingarm Dust Seal Cap (Set/2)

#73-1028 | Honda CB350F (1972), CB350F (1974), CB360G (1974), CB360K (1974), CB360T (1975-1976), CB400F (1975-1977), CB450K (1974), CB500T (1975-1976), CB550F (1975-1977), CB550K (1976-1978), More...

Swingarm Dust Seal Cap (Set/2). These Caps go on the Ends of the Swingarm Pivot. Replaces OEM # 52144-362-000 X2.

USD$ 11.05
Listed Models
  Shock Absorber Nut
USD$ 2.40
Listed Models

Shock Absorber Nut

#49-0779 | Honda CB1100F (1983), CB175K (1970-1973), CB200 (1974), CB350F (1972), CB350F (1974), CB350G (1973), CB350K (1970-1972), CB360G (1974), CB360 (1974), CB360T (1975-1976), More...

Shock Absorber Nut, Used when Installing Shocks. Replaces OEM # 90309-315-000 Note: Nuts sold Each, order the quantity you require

USD$ 2.40
Listed Models
  Fork Cap O-Ring (Set/2)
USD$ 1.45
Listed Models

Fork Cap O-Ring (Set/2)

#73-0915 | Honda CB650SC (1982), CB750F (1981-1982), CB750SC (1982-1983), CB900C (1980-1982), CR125R (1979-1980), CR250R (1978-1980), CX500TC (1982), FT500 (1982-1983), GL1000LTD (1976), GL650 (1983), More...

Fork Cap O-Ring Set of 2. Replaces OEM # 91344-PC9-004

USD$ 1.45
Listed Models
  Steering Bearing Kit
USD$ 43.95
Listed Models

Steering Bearing Kit

#28-2013 | Honda CBX (1979), CBX1000 (1979), CBX1050 (1979), GL1000 (1977-1979), CB750F (1979), CB750K (1979), CR450R (1981), CR250R (1979-1981), CR125R (1981), CB750L (1979)

Tapered Roller Steering Bearing Conversion Kit. Superior to OEM quality, 10X the contact area and less flex. Designed as a drop in replacement for the original bearing. Kit is complete with upper and lower tapered bearing races. High quality made in Japan.

USD$ 43.95
Listed Models
  Swingarm Dust Seal Cap Set
USD$ 17.95
Listed Models

Swingarm Dust Seal Cap Set

#99-4972 | Honda CB750K (1980-1982), CB750F (1980-1982), CB750C (1980-1982), CB1100F (1983), CB750SC (1982-1983), CB900F (1981-1982)

Swingarm Dust Seal Cap Set of 2, Replaces OEM# 52144-425-831

USD$ 17.95
Listed Models
  Fork Spacer Trim Set
USD$ 24.40
Listed Models

Fork Spacer Trim Set

#27-1112 | Honda CB750K (1969-1976), CB350G (1973), CB450K (1970-1974), CL350K (1972-1973), CL450K (1972), CL450K (1974)

Chrome Front Fork Spacer Trim Set/2. These are the Chrome Ribs that Cover the Top of the Fork Boots. Replaces OEM # 51608-300-000

USD$ 24.40
Listed Models
  Steering Stem Washer
USD$ 2.20
Listed Models

Steering Stem Washer

#49-0787 | Honda - ATV ATC250R (1983-1984), Honda CB1000 (1994-1995), CB350 (1968), CB350F (1972), CB350F1 (1974), CB350G (1973), CB350K (1970-1972), CB360G (1974), CB360K (1974), CB360T (1975-1976), More...

Chrome Steering Stem Washer, Replaces OEM # 90503-283-000 Sold Each, order the quantity you require.

USD$ 2.20
Listed Models
  Steering Stem Nut
USD$ 5.90
Listed Models

Steering Stem Nut

#73-1128 | Honda CB1000C (1983), CB1100F (1983), CB550SC (1983), CB650 (1979-1982), CB650C (1980-1981), CB650SC (1982-1985), CB700SC (1984-1986), CB750C (1980-1982), CB750F (1979-1982), CB750K (1979-1982), More...

Steering Stem Nut, Replaces OEM # 90304-425-000 Sold Each, we also offer the washer for this nut

USD$ 5.90
Listed Models
  Custom Fork Boot Collars ~ Joker Machine
USD$ 70.25
Listed Models

Custom Fork Boot Collars ~ Joker Machine

#12-0072 | Honda CB750K (1969-1976), CB500K (1971-1973), CB550F (1975-1977), CB550K (1974-1976), CB450K (1970-1974), CL450K (1972), CL450K (1974)

Joker Machine Brand ~ Custom Fully CNC Machined Fork Boot Collar Set/2. A great solution for giving your stock bike (with the sheet metal headlight ears), an open fork tube Cafe look, while giving you an upper attachment point in order to retain your stock accordion style O.E.M. fork Gaitors. Designed to fit easily onto 35MM fork tubes and may be adjusted up-or-down along the tube into position, then tightened into place with the recessed set screw located in the groove (totally invisible).

USD$ 70.25
Listed Models
  Fork Tube Set
USD$ 125.75
Listed Models

Fork Tube Set

#73-0943 | Honda CB350F (1972), CB350F (1974), CB350G (1973), CB350K (1972), CL350K (1972-1973)

Fork Tube Set/2, Length (555mm or 21.85"), 33mm OD. Replaces OEM# 51410-317-700 Before ordering Please Confirm 21.85" is the Length you would like

USD$ 125.75
Listed Models
  Fork Seals
USD$ 12.55
Listed Models

Fork Seals

#27-1009 | Honda XL175 (1974-1978), XL125S (1979-1981), XL125K (1974-1978), XL185S (1979), CR125 (1974-1975), XL100S (1979)

Fork Seals Set/2 31 X 43 X 12.5

USD$ 12.55
Listed Models
  Fork Cover Rubber Set
USD$ 19.95
Listed Models

Fork Cover Rubber Set

#73-0836 | Honda CB450K (1970-1974), CB500T (1975-1976), CB750K (1969-1976), CL450K (1972), CL450K (1974)

Fork Cover Rubber Set/2, Replaces OEM # 51601-300-000

USD$ 19.95
Listed Models
  Fork Cap O-Ring (Set of 2)
USD$ 1.45
Listed Models

Fork Cap O-Ring (Set of 2)

#73-0917 | Honda VF1100C (1983-1986), GL1200 (1984), GL1200A (1984-1987), GL1200I (1984-1987), VF1000F (1984), VF1100S (1984-1985), GL1200L (1985), GL1200SEI (1986), VT1100C (1987-1990), VT1100C (1992-2007), More...

Fork Cap O-Ring Set of 2. Replaces OEM # 91356-MB4-003

USD$ 1.45
Listed Models
  Fork Dust Seals
USD$ 14.00
Listed Models

Fork Dust Seals

#27-1062 | Honda VT600C (1988-1997), CB700SC (1984-1986)

Fork Dust Seals Pk/2

USD$ 14.00
Listed Models
  Stock Type Fork Gaitors
USD$ 22.15
Listed Models

Stock Type Fork Gaitors

#27-1061 | Honda CB750K (1969-1976), CB550K (1974-1976), CB550F (1975-1976), CB500K (1971-1973), CB450K (1970-1974), CL450K (1972), CL450K (1974)

Black Stock Type Fork Gaitors (Set/2) OEM Ref. # 51611-300-000

USD$ 22.15
Listed Models
  Fork Gaiters
USD$ 19.95
Listed Models

Fork Gaiters

#27-1089 | Honda CB450K (1970-1974), CB500K (1971-1973), CB550F (1975-1976), CB550K (1974-1976), CB750K (1969-1976), CL450K (1972), CL450K (1974)

Fork Gaiters OEM Ref # 51611-300-000 Note: These are about 1.75" shorter then the stock type but will work fine

USD$ 19.95
Listed Models
  Fork Internal Circlip Set
USD$ 5.15
Listed Models

Fork Internal Circlip Set

#73-1035 | Honda CB750K (1973-1976), CB500K (1971-1973), CB550K (1974-1976), CB450K (1972-1974), CL450K (1972), CL450K (1974), CR250M (1973), MT250 (1974), SL350K (1972), XL250 (1972), More...

Fork Internal Circlip (48mm) Set/2, Replaces OEM # 94521-48000

USD$ 5.15
Listed Models
  Fork Cap O-Ring Set/2
USD$ 1.45
Listed Models

Fork Cap O-Ring Set/2

#49-0790 | Honda - ATV ATC200X (1983-1987), ATC250SX (1985-1987), Honda CB125TT (1990), CB250 (1991-1997), CB250 (1999-2008), CB360G (1974), CB360 (1974), CB360T (1975-1976), CB400F (1975-1977), CB400T (1981), More...

Fork Cap O-Ring Set of 2. 23mm x 2.8mm size. Replaces OEM # 94608-50000 X2.

USD$ 1.45
Listed Models
  Steering Stem Head Lock Nut
USD$ 5.90
Listed Models

Steering Stem Head Lock Nut

#29-7025 | Honda CB1000C (1983), CB1000 (1994-1995), CB1100F (1983), CB400F (1989-1990), CB600F (2004), CB600F (2006), CB700SC (1984-1986), CB750SC (1991-1993), CB750SC (1995-2003), CB750C (1980-1982), More...

Steering Stem Head Top, Thread on Lock Nut. Replaces OEM # 90302-425-830

USD$ 5.90
Listed Models
  Shock Absorber Set ~ Stock Design
USD$ 85.05
Listed Models

Shock Absorber Set ~ Stock Design

#06-3648 | Honda CB500T (1975-1976), CB550K (1977-1978), CB550F (1977), CB400F (1975-1977)

Stock Type Designed Shock Absorber Set - No Upper Shroud Style All Chrome Shock Set/2. These are modelled after the original stock shocks. Replaces OEM# 52400-375-000 / 52400-375-611 / 52400-404-013 The original OEM shocks came with 3 position spring preload adjustments however we have upgraded these to 5 spring preload adjustments so you can better fine tune these shocks! 321mm (12.6") Center of Eye to Clevis. Upper mounting eye comes with rubber damper already installed. Please Note - The top eye width is 20mm. On some models you may need to add a washer(s) to shock mount when mounting

USD$ 85.05
Listed Models
  Fork Dust Seals
USD$ 11.80
Listed Models

Fork Dust Seals

#27-1056 | Honda CMX250C (1985-1986)

Fork Dust Seals Pk/2

USD$ 11.80
Listed Models
  Fork Dust Seals
USD$ 13.30
Listed Models

Fork Dust Seals

#27-1076 | Honda XR80R (1985-2000), XR100R (1985-2000)

Fork Dust Seals Pk/2

USD$ 13.30
Listed Models
The names Honda, Yamaha, Kawasaki, Suzuki and any other trade names or symbols belonging to each respective corporation are stated for reference purposes only. The products on this site are after market (not OEM) replacement parts and accessories only. We have no relationship to the listed companies.