Search ►
Speedometer Assembly
Stock Style Speedometer Assembly, Replaces OEM # 25001-044 / 25005-121 / 25005-1031 / 25006-052 0-160MPH.
Speedometer Cable
Speedometer Cable
Speedometer Cable
Speedometer Cable - Black - OEM Ref # 44830-KB4-700 / 44830-356-010 Made in Japan
Speedometer Cable
Speedometer Cable - Black - OEM Ref. # 44830-425-870 End to End Length 38.5" Made in Japan
Speedometer Cable
Speedometer Cable - Black - OEM Ref. # 44830-356-000 / 44830-426-830 / 44830-371-010 Length 40.75" Made in Japan
Speedometer Cable
Speedometer Cable - OEM Ref # 44830-KC1-010 Made in Japan
Speedometer Cable
Speedometer Cable - OEM Ref # 44830-MA5-670 Made in Japan
Speedometer Cable
Speedometer Cable - OEM Ref # 44830-461-770 - Length 42.5" Made in Japan
Speedometer Clamp
Stock Style Chrome Speedometer Clamp, Replaces OEM # 53231-300-000 Hardware Not Included, Sold Separate Our Part #17-6946
Speedometer Cable
Speedometer Cable, Replaces OEM# 44830-KB7-000 / 44830-456-000 / 44830-437-670 / 44831-456-000 / 44830-369-700 / 44830-313-000
Speedometer Cable
Speedometer Cable, Replaces OEM# 44830-KJ9-000 / 44830-428-000 / 44830-428-010 / 44830-428-900
Speedometer Cable
Speedometer Cable, Replaces OEM# 44830-KK0-000 / 44830-KK1-000 / 44830-437-671 / 44830-KB9-000 / 44830-GC1-000
Stock Style Speedometer - KPH
Stock Style Speedometer KPH with back illumination, Face dial ranges from 0-240KPH. The ratio of this Speedometer is 100KPH=2330 RPM which is the ratio used on all stock type CB's. Note: The Speedometers slightly changed from year to year, this may not be an exact stock match for your bike but will work great! Housing Size approx 4.6", face 3.9" Check the photo for the design.
Tachometer & Speedometer Gauge Bracket
Stock Type Tachometer & Speedometer Gauge Bracket, Replaces OEM # 25008-1005 Made from light weight black painted aluminum and with instrument gauge shock dampers. No mounting hardware included.
Speedometer Gear Box Assembly
Speedometer Gear Box Assembly, Replaces OEM# 44800-ML8-701 This is the speedometer cable and speed sensor axle drive box assembly.
Tachometer & Speedometer Jewel Set
Tachometer & Speedometer Jewel Set. Includes Four Jewels/Lenses: Red (Hi-Beam), Orange (Turn Signals), Green (Neutral) and Red (Oil Pressure).
Speedometer Tripmeter Reset Knob
Speedometer Tripmeter Reset Knob, Replaces OEM# 37237-300-000 These buttons are often damaged and are no longer available from Honda. This reproduction knob is the finishing touch for your precious speedo meter. Fits to many speedos. Made for 3mm shafts.
Speedometer Cable Inner Wire
Speedometer Cable Inner Wire, Replaces OEM# 44831-KJ9-000 / 44831-371-010 This is the inner wire (that is inside the speedometer cable). So, if your cables exterior is in good condition this will be a great cheaper alternative to replace the old inner wire and get your cable working perfectly.
Chrome Speedometer & Tachometer Cover Set
Set of Chrome Plated Speedometer & Tachometer Covers. These go over the stock speedo and tach gauges to give them a great chrome look! Diameter at Base of Cover - 103mm Diameter at Top of Covers - 87mm Height of Covers - 37mm Includes a small hole in one of the covers for the tripmeter. Note: Speedo/Tach Not Included, Shown in Photo to illustrate how they look when installed.
Speedometer & Tachometer Crimp Ring Set/2
Speedometer & Tachometer Crimp Ring Set/2 for NIPPON SEIKI gauges. When changing the speedometer or tachometer face plates these rings are often damaged. Get a new set today to have your speedo & tachometer restoration looking perfect! Dimensions: Inner diameter 103.4mm. - Outer diameter 108.2mm.
Speedometer / Tachometer Glass Lens Rubber Seal
Speedometer or Tachometer Glass lens Rubber Seal. This seal is used when replacing the glass on the Speedo or Tach. Fits: All 92mm (3.6") glass lenses. Sold each, order the quantity you require
Speedometer & Tachometer Crimp Ring Set/2
Speedometer & Tachometer Crimp Ring Set/2. When changing the speedometer or tachometer face plates these rings are often damaged. Get a new set today to have your speedo & tachometer restoration looking perfect! Dimensions: Inner diameter 102.7mm. - Outer diameter 107.5mm.
Speedometer / Tachometer Internal Rubber Seal
Speedometer / Tachometer Internal Rubber Seal. This internal rubber seal replaces the ripped, dried or missing rubber internal seal. This internal rubber seal fits to any stock type Honda CB750 ND brand gauges.
Speedometer & Tachometer Replacement Glass Lens Set/2
Speedometer & Tachometer 92mm Glass Lens Set/2. If the glass lens of your gauges have scratches or are broken, with these glass lenses you are able to repair your gauges' lenses. These glass lenses are slightly bent like the original glass lenses.
GL1000 K0 Speedometer & Tachometer Face Plate Set ~ MPH
GL1000 K0 Speedometer & Tachometer Face Plate Set ~ MPH Type. The faces will be supplied with a decal for the TEMP gauge as well. Disassembly of speedometer and tachometer is required. All face plates are "printed" in the United Kingdom on the highest quality materials. Every detail has been designed very accurately to achieve an exact copy of the original face plates. With this set you are able to restore your gauges to the manufacturers standards.