HondaC50 ► 

Refine Search Results
Honda C50 Custom Micro Push Button/Kill Switch

Custom Micro Push Button/Kill Switch

#01-9924

Custom Micro Push Button/Kill Switch. High quality chrome switch designed to clean up the appearance of your bike while allowing the use of a switch. Works great as a hidden start/kill or horn button. Includes a contoured washer which allows for installations on round surfaces such as handlebars or frames. Switch Size 14mm x 12mm with 2X 20" wires.

Honda C50 Dynatek Performance High Output 3 Ohm Ignition Coil Set/2 With Plug Wires
USD$ 214.95

Dynatek Performance High Output 3 Ohm Ignition Coil Set/2 With Plug Wires

#07-9974

Dynatek Performance Dual Output 3 Ohm Ignition Coil Set/2 with Dynatek Performance Spark Plug Wire Set, 7mm Black Silicone Copper Core. Includes Hardware and Instructions. Comes with a one year warranty through Dynatek. Wires are 4' Length (cut to your needed length). 2 wires in this set which can be cut into 4. All wires are supplied with finished spark plug boot ends and loose coil terminals to allow the final length to be determined by the user. Wires feature a solid copper core for use on older vehicles where electrical interference is not an issue. High quality made in the USA. These high tech, top quality coils are made in the USA and are designed for maximum performance. They produce spark voltages in excess of 30,000 volts and spark energies second to none. Dyna Coils work with point ignitions, aftermarket electronic ignitions and factory electronic ignitions. Before selecting a coil check the coil primary resistance requirements as specified by the manufacturer of the ignition being used before purchasing. When choosing the right coil for your bike, never select a coil with a lower resistance than your ignition system.

Honda C50 Dynatek Charge Monitor

Dynatek Charge Monitor

#07-9976

Dynatek Charge Monitor. Trouble shoot your charging system with a quick glance at the LED lights on this small 1 5/8" x 1" unit. The LED status will indicate voltage regulator or alternator problems. The Dyna Charge Monitor is a valuable addition to vehicles with a battery ignition and a charge system as found on nearly all stock vehicles. The Charge Monitor allows easy determination of the operational state of the charging system with a quick glance at the indicator LED's. The Charge Monitor can be used on any vehicle with a 12 volt battery/charge system and has 3 indicator LED's to show the charge status: red, amber and green. When the right most red LED is on the battery is being overcharged due to a faulty voltage regulator. When the green LED is on, the battery is being charged at a normal voltage. When the left most red LED is on, the battery voltage is getting very low and the charge circuit or battery is failing. High quality made in the USA. Comes with a one year warranty through the manufacturer.

Honda C50 Performance Tool Spark Plug Crimper Tool

Performance Tool Spark Plug Crimper Tool

#07-9977

Performance Tool Spark Plug Crimp Tool. Perfect crimping tool for any spark plug wires. Incorporates wire cutter, terminal crimper tool and stripper in one handy tool. Black anodized finish with insulated hand grips. Crimp slot on the end of the tool secures most ignition terminals including "W" type, right angle and "High Tower" terminals. Crimps 7mm to 8.5mm ignition wire. Works with 10 to 22 gauge solderless terminals. High quality made in the USA. Comes with a lifetime warranty through the manufacturer!

Honda C50 Dynatek Performance Spark Plug Wire Set

Dynatek Performance Spark Plug Wire Set

#07-9978

Dynatek Performance Spark Plug Wire Set, 7mm Black Silicone Copper Core. 4' Length (cut to your needed length). 2 wires in this set which can be cut into 4. All wires are supplied with finished spark plug boot ends and loose coil terminals to allow the final length to be determined by the user. Wires feature a solid copper core for use on older vehicles where electrical interference is not an issue. High quality made in the USA. Will work with Dyna Style Coils only # 07-9979, 07-9980 or 17-6810.

Honda C50 Dynatek Performance High Output 5 Ohm Ignition Coil Set/2
USD$ 189.95

Dynatek Performance High Output 5 Ohm Ignition Coil Set/2

#07-9979

Dynatek Performance Dual Output 5 Ohm Ignition Coil Set/2. Includes Hardware and Instructions. Comes with a one year warranty through Dynatek. These high tech, top quality coils are made in the USA and are designed for maximum performance. They produce spark voltages in excess of 30,000 volts and spark energies second to none. Dyna Coils work with point ignitions, aftermarket electronic ignitions and factory electronic ignitions. Before selecting a coil check the coil primary resistance requirements as specified by the manufacturer of the ignition being used before purchasing. When choosing the right coil for your bike, never select a coil with a lower resistance than your ignition system.

Honda C50 Dynatek Performance High Output 3 Ohm Ignition Coil Set/2
USD$ 189.95

Dynatek Performance High Output 3 Ohm Ignition Coil Set/2

#07-9980

Dynatek Performance Dual Output 3 Ohm Ignition Coil Set/2. Includes Hardware and Instructions. Comes with a one year warranty through Dynatek. These high tech, top quality coils are made in the USA and are designed for maximum performance. They produce spark voltages in excess of 30,000 volts and spark energies second to none. Dyna Coils work with point ignitions, aftermarket electronic ignitions and factory electronic ignitions. Before selecting a coil check the coil primary resistance requirements as specified by the manufacturer of the ignition being used before purchasing. When choosing the right coil for your bike, never select a coil with a lower resistance than your ignition system.

Honda C50 Replacement Sealed Beam 12V (5 3/4")

Replacement Sealed Beam 12V (5 3/4")

#09-0007

Replacement Sealed Beam 12 Volt 60/37W 5 3/4" Universal Sealed Beam - DOT & CHP Approved

Honda C50 Replacement Sealed Beam 12V (7")
USD$ 40.00
Out of Stock

Replacement Sealed Beam 12V (7")

#09-0008

Replacement Sealed Beam 12 Volt 60/50W 7" Universal Sealed Beam

Honda C50 Headlamp Visor (7")

Headlamp Visor (7")

#09-0009

Headlamp Visor With Eagle Emblem Fits 7" Headlight

Honda C50 Headlight Visor (5 3/4")

Headlight Visor (5 3/4")

#09-0010

Headlamp Visor Fits 5 3/4" Headlight

Honda C50 Headlamp Visor (7")

Headlamp Visor (7")

#09-0011

Headlamp Visor Fits 7" Headlight

Honda C50 Tommaselli Type Headlight Brackets (35mm-36mm)

Tommaselli Type Headlight Brackets (35mm-36mm)

#09-0012

Tommaselli Type Headlight Brackets 35-36mm

Honda C50 Headlight Bracket Set

Headlight Bracket Set

#09-0013

Headlight Bracket Set - Chrome 3-Hole Type Universal Adjustable Fit - 32mm-38mm

Honda C50 Tommaselli Type Headlight Brackets (40mm-41mm)

Tommaselli Type Headlight Brackets (40mm-41mm)

#09-0014

Tommaselli Type Headlight Brackets 40-41mm

Honda C50 Tommaselli Type Headlight Brackets (32mm-34mm)

Tommaselli Type Headlight Brackets (32mm-34mm)

#09-0015

Tommaselli Type Headlight Brackets 32-34mm

Honda C50 Headlight Bracket Set (35mm)

Headlight Bracket Set (35mm)

#09-0016

Aluminum Custom Headlight Brackets 35mm Headlight Mounting Holes 7/16"

Honda C50 Headlight Bracket Set (34mm)

Headlight Bracket Set (34mm)

#09-0017

Aluminum Custom Headlight Brackets 34mm Headlight Mounting Holes 7/16"

Honda C50 Headlight Bracket Set (41mm)

Headlight Bracket Set (41mm)

#09-0018

Aluminum Custom Headlight Brackets 41mm Headlight Mounting Holes 7/16"

Honda C50 Headlight Bracket Set (36mm)

Headlight Bracket Set (36mm)

#09-0019

Aluminum Custom Headlight Brackets 36mm Headlight Mounting Holes 7/16"

Honda C50 Headlight Bracket Set

Headlight Bracket Set

#09-0020

Headlight Bracket Set - Black 3-Hole Type Universal Adjustable Fit - 32mm-38mm

Honda C50 Cast Aluminum Black Headlight Bracket Set

Cast Aluminum Black Headlight Bracket Set

#09-0021

Cast Aluminum Black Headlamp Mounting Bracket Set. Sold with adapters to fit 35mm, 39mm and 41mm fork tube outer diameters.

Honda C50 Custom Universal Headlamp

Custom Universal Headlamp

#09-0023

Custom Universal Headlamp 4 1/2" Chrome bottom mount lamp assembly. High beam indicator. Halogen bulb and headlamp plug with wires.

Honda C50 Custom Universal Headlamp

Custom Universal Headlamp

#09-0026

Custom Universal Headlamp 5 1/2" Chrome bottom mount lamp assembly. High beam indicator. Halogen bulb and headlamp plug with wires.

Honda C50 Rectangular Headlamp

Rectangular Headlamp

#09-0027

Small Rectangular Headlamp 6.5"x4.5" Lens Steel Lens Frame, With Black Plastic Housing Halogen Bulb & Headlamp Plug With Wires Side Mount, 14mm Mounting Holes, 7.25" Width Two Openings On Back

Honda C50 Custom Bates Style 4 1/2" Black Bottom Mount Headlight

Custom Bates Style 4 1/2" Black Bottom Mount Headlight

#09-0043

Custom Bates Style 4 1/2" Satin Black Bottom Mount Headlight. Glass sealed beam with a P15D base, 12 volt 35/35 watt bulb, 16" wire leads. Blue dot high/low beam indicator on top of light housing.

Honda C50 Headlight Shell & Rim

Headlight Shell & Rim

#09-0047

Custom Ready to Assemble Chrome Side Mount Headlight Bucket Rim & Retainer. Designed for 7" sealed or non sealed H4 type headlights. Chrome all metal bucket with chrome trim ring. Side mounting holes are threaded (13.5mm). Outer side mounting points are 7-1/2" apart. Comes with a wired plug that works with sealed beam or H4 bulbs. H4 Beam Headlight sold separately #09-0072

Honda C50 Classic Round Black Taillight

Classic Round Black Taillight

#09-0073

Classic Round Black Taillight with plate bracket. 2 1/4" Round lens (with a clear bottom to light up your plates), 12 Volt double filament bulb. Works as a running and brake light.

Honda C50 Mini Bates Style LED Taillight ~ Chrome

Mini Bates Style LED Taillight ~ Chrome

#09-0074

Mini Bates Style LED Taillight ~ Chrome. 12 Volt taillight with 8 super bright LED's. Has running and brake light functions. Comes with mounting hardware and swivel bracket which allows it to be angled at different positions. Lens is 1 3/4" round, Outer bezel is 2 1/4" in diameter and is 2 1/4" long, Stands about 3" tall from base of mounting bracket. 3 Wire lead is about 12" long with bullet connectors. (Ground, running and brake light Wiring instructions) RED = Stop YELLOW = Running Lights BLACK = Ground

Honda C50 Mini Bates Style LED Taillight ~ Black

Mini Bates Style LED Taillight ~ Black

#09-0075

Mini Bates Style LED Taillight ~ Black. 12 Volt taillight with 8 super bright LED's. Has running and brake light functions. Comes with mounting hardware and swivel bracket which allows it to be angled at different positions. Lens is 1 3/4" round, Outer bezel is 2 1/4" in diameter and is 2 1/4" long, Stands about 3" tall from base of mounting bracket. 3 Wire lead is about 12" long with bullet connectors. (Ground, running and brake light Wiring instructions) RED = Stop YELLOW = Running Lights BLACK = Ground

Honda C50 Beehive Chrome Taillight

Beehive Chrome Taillight

#09-0076

Beehive Chrome Taillight Universal fender mounting for most applications. For under plate mounting, with upward plate illumination. 12 volt bulb, Gasket for fender mounting and plate bracket included. 6 3/4″ Length, 3″ Width, 4″ Height.

Honda C50 Beehive Black Taillight

Beehive Black Taillight

#09-0077

Beehive Black Taillight Universal fender mounting for most applications. For under plate mounting, with upward plate illumination. 12 volt bulb, Gasket for fender mounting and plate bracket included. 6 3/4″ Length, 3″ Width, 4″ Height.

Honda C50 Vintage Round Black Taillight

Vintage Round Black Taillight

#09-0080

Vintage All Steel Round Satin Black Taillight with plate bracket. 1 5/8" Round real glass lens (with a clear bottom to light up your plates), 12 volt double filament bulb. Works as a running and brake light. Base mounting plate measures 2" top to bottom and 2 1/2" wide. Mounting base 6mm holes are 1 1/4" wide x 7/8" top to bottom, tag mounting plate measures 6 1/2" wide, tag mounting holes 4 1/2" centered.

Honda C50 Black Sparto Tailight

Black Sparto Tailight

#09-0083

Tail Light Assembly - Black Sparto Classic 50's design. Dual filament Bulb. Not DOT approved for Highway use.

Honda C50 Headlight Shell and Rim

Headlight Shell and Rim

#09-0084

Custom 7" Satin Black Side Mount Headlight Shell with Chrome Trim Ring. Designed for 7" sealed type headlights. Includes a 3 wire plug that works with sealed beam or H4 bulbs as well as the clip/screw and wire clips. Side mounting holes are threaded to use 5/16-24 bolts (bolts not included). Outer side mounting points are 7" apart. 3" Mounting depth from mounting holes to the back of the bucket. Sealed beam Headlight sold separately #09-0008 (Below), or the upgraded halogen beam #09-0051

Honda C50 LED Taillight

LED Taillight

#09-0085

Custom LED Taillight. Small and lightweight, this cool little LED taillight includes a swiveling mounting bracket with about 100 degrees of up or down adjustment making it ideal for many custom applications. Featuring a clear lens with 8 super bright red LED's for the taillight and brake light as well as 5 clear LED's for the license plate illumination. Machined from aluminum in anodized black. Not DOT approved. Dimensions are approximately 1-7/8" wide x 1-3/4" deep.

Honda C50 Custom Chrome Dual Beam Headlights
USD$ 65.00
Out of Stock

Custom Chrome Dual Beam Headlights

#09-0087

Custom Chrome 4" Dual Beam Headlight Set. Complete universal side mount dual hi/low beam head light assembly. The two high quality glass sealed beam style lights have H4 60/55 watt bulbs along with pilot running lights in each light. Assembled and pre-wired harness to simply plug into your existing H4 plug. Side mounting bolts hole are threaded for M8 x 1.25 bolts. Total outer width at side mounting bolts in 8 1/2" wide. Center of mounting bolts to rear of the light bucket is 2 5/8" in depth. From the front of the trim ring to the rear of the bucket is about 4 1/2" in depth.

Honda C50 Custom Matte Black Dual Beam Headlights

Custom Matte Black Dual Beam Headlights

#09-0088

Custom Matte Black 4" Dual Beam Headlight Set. Complete universal side mount dual hi/low beam head light assembly. The two high quality glass sealed beam style lights have H4 60/55 watt bulbs along with pilot running lights in each light. Assembled and pre-wired harness to simply plug into your existing H4 plug. Side mounting bolts hole are threaded for M8 x 1.25 bolts. Total outer width at side mounting bolts in 8 1/2" wide. Center of mounting bolts to rear of the light bucket is 2 5/8" in depth. From the front of the trim ring to the rear of the bucket is about 4 1/2" in depth.

Honda C50 Custom Bates Style 5 3/4" Black Bottom Mount Headlight

Custom Bates Style 5 3/4" Black Bottom Mount Headlight

#09-0089

Custom Bates Style 5 3/4" Satin Black Bottom Mount Headlight. Glass sealed beam, 12 Volt 60/55 watt dual filament H4 bulb, 16" wire leads. Blue dot high/low beam indicator on top of light housing. Comes with a 3 wired plug that works with H4 bulbs. Assembled ready to mount, hook up the 3 wires and ride!

Honda C50 Black Projected Sparto Tailight

Black Projected Sparto Tailight

#09-0092

Black Sparto Taillight with a Projected 1 7/8" Lens. Made from Aluminum with 12" 2 wire leads self grounding for easy hook up. 5 3/4" long, 4 7/8" wide and 3 1/4" tall. Includes dual filament bulb 12V 23/8W and mounting hardware.

Honda C50 Chrome Mini Retro Hooded Tail Light
USD$ 37.00
Out of Stock

Chrome Mini Retro Hooded Tail Light

#09-0093

Chrome Mini Retro Hooded Tail Light with Mounting Hardware. Features a pivoting mounting base bracket. Includes running light, brake light and tag light functions. Uses a standard 21/5 watt 1157 bulb. Wire lead is about 10" long. Housing is 2 1/8" round x 3 3/8" long over all. Stands about 3 1/4" tall from base of mounting bracket. Mounting base is 2" long x 3/4" wide. Mounting bolt holes are 1/4" holes x 1 1/4" center to center.

Honda C50 Satin Black Mini Retro Hooded Tail Light

Satin Black Mini Retro Hooded Tail Light

#09-0094

Satin Black Mini Retro Hooded Tail Light with Mounting Hardware. Features a pivoting mounting base bracket. Includes running light, brake light and tag light functions. Uses a standard 21/5 watt 1157 bulb. Wire lead is about 10" long. Housing is 2 1/8" round x 3 3/8" long over all. Stands about 3 1/4" tall from base of mounting bracket. Mounting base is 2" long x 3/4" wide. Mounting bolt holes are 1/4" holes x 1 1/4" center to center.

Honda C50 Custom Mini Deco Turn Signal Lamp Set
USD$ 35.00
Out of Stock

Custom Mini Deco Turn Signal Lamp Set

#09-0095

Custom Mini Deco Turn Signal Lamp Set/2. High quality die cast body with interchangeable lenses (amber and red). Can be wired as turn signals or running lights. Stem base to outer edge of body 2 1/2", body is 1 7/8" x 2 7/8" long, mounting stud 1/4" diameter x 3/4" long

Honda C50 Turn Signal Light Mount Bracket Holder Set

Turn Signal Light Mount Bracket Holder Set

#09-0098

Black Metal Fork Ear Clamp/Turn Signal Light Mount Bracket Holder Set/2 with Screws, Washers and Nuts. Fits 30-45mm Front Forks

Honda C50 Turn Signal Light Mount Bracket Holder Set

Turn Signal Light Mount Bracket Holder Set

#09-0099

Chrome Metal Fork Ear Clamp/Turn Signal Light Mount Bracket Holder Set/2 with Screws, Washers and Nuts. Fits 30-45mm Front Forks

Honda C50 Vintage Round Chrome Taillight

Vintage Round Chrome Taillight

#09-0100

Vintage All Steel Round Chrome Taillight with plate bracket, bolts and washers. 1 5/8" Round plastic lens (with a clear bottom to light up your plates), 12 volt double filament bulb. Works as a running and brake light. Base mounting plate measures 2" top to bottom and 2 1/2" wide. Mounting base 6mm holes are 1 1/4" wide x 7/8" top to bottom, tag mounting plate measures 6 1/2" wide, tag mounting holes 4 1/2" centered.

Honda C50 Chrome Sparto Tailight

Chrome Sparto Tailight

#09-0101

Tail Light Assembly - Chrome Sparto Design. Dual filament Bulb. Not DOT approved for Highway use.

Honda C50 Headlamp Plug

Headlamp Plug

#10-1155

Headlamp Plug (3 Prong)

Honda C50 Headlamp "W" Clips

Headlamp "W" Clips

#10-1156

Headlamp "W" Clips - Pk/5 For Holding round headlamps into many standard rims

Honda C50 H7 Bulb

H7 Bulb

#10-1160

H7 Bulb, 12Volt 100Watt PX26D, Fits the OEM numbers here but this bulb has been upgraded and made brighter then the stock bulb. Replaces OEM# 34901-MAT-611, 92069-0053, 5PS-84314-00-00

The names Honda, Yamaha, Kawasaki, Suzuki and any other trade names or symbols belonging to each respective corporation are stated for reference purposes only. The products on this site are after market (not OEM) replacement parts and accessories only. We have no relationship to the listed companies.