Honda ► C70 ►
-
Here’s our hand-picked list of parts and accessories for your Honda C70 with universal parts included►
- Honda
![Honda C70 Metric Tap & Die Set](/images/parts/100/35-8030.jpg)
Metric Tap & Die Set
Metric Tap & Die Set 39pc Set Includes Pitch Gauge, Die Holder, 2 Tap Wrenches, Screw Driver, Metric Taps: M3 X 0.5 M3 X 0.6 M4 X 0.75 M4 X 0.7 M5 X 0.8 M5 X 0.9 M6 X 1.0 M6 X 0.75 M7 X 0.75 M7 X 1.0 M8 X 1.0 M8 X 1.25 M10 X 1.25 M10 X 1.5 M12 X 1.25 M12 X 1.5 1/8NPT X 27 Includes 17 Dies to Match the 17 Tap Sizes Listed.
![Honda C70 Metal Funnel](/images/parts/100/35-8040.jpg)
Metal Funnel
Metal Funnel Comes With 14" Flexible/Detachable Metal Nozzle
![Honda C70 Air Duster](/images/parts/100/35-8042.jpg)
Air Duster
Air Duster Gun Comes With 2 Tips
![Honda C70 Flexible Magnet](/images/parts/100/35-9036.jpg)
Flexible Magnet
Flexible Magnet 23" Long Flex Rod With Magnetic Tip Lifts Up To 3.5Lbs
![Honda C70 Screw Extractor Set](/images/parts/100/35-9048.jpg)
Screw Extractor Set
Screw Extractor Set 5 Pc Set 1/8", 3/16", 15/64", 5/16", 3/8" Used to remove broken off studs, bolts & screws.
![Honda C70 Deep Allen Socket Driver Set](/images/parts/100/35-9049.jpg)
Deep Allen Socket Driver Set
Deep Allen Socket Driver Set 8 Pc Set - 140mm Bits Includes 1/2" Drive, Socket Sizes - 5, 6, 7, 8, 10, 12, 14 & 17mm
![Honda C70 Metric Pin Punch Set](/images/parts/100/35-9050.jpg)
Metric Pin Punch Set
Metric Pin Punch Set 8 Pc Set Includes 1.5mm, 2mm, 3mm, 4mm, 5mm, 5.5mm, 6mm & 8mm
![Honda C70 T-Handle Wrench Set](/images/parts/100/35-9101.jpg)
T-Handle Wrench Set
T-Handle Wrench Set 7 Pc Set Includes 8, 10, 12, 14 & 17mm 6 Point Socket Wrenches & Phillips #2 & #3 Screwdriver Tips.
![Honda C70 Carb Cleaning Tool Set](/images/parts/100/35-9110.jpg)
Carb Cleaning Tool Set
Carburetor Cleaning Tool Set. Includes 20 steel wire ends designed for cleaning the tiny holes found in carburetor jets. Cleaning wire sizes range from 0.45mm to 1.5mm.
![Honda C70 Fluid Hose Clamp](/images/parts/100/35-9117.jpg)
Fluid Hose Clamp
Fluid Hose Clamp, all steel construction with adjustable locking collar. Completely or partially closes flexible brake, fuel, and vacuum fluid lines.
![Honda C70 Portable Auxiliary Fuel Tank Tool](/images/parts/100/35-9120.jpg)
Portable Auxiliary Fuel Tank Tool
Portable Auxiliary Fuel Tank, for Non Fuel Injection Systems. Includes 4 Feet of 1/4" fuel line and an inline fuel valve with 1/4" inlet and outlet. Fuel capacity 2 Litres. For use when tuning a motorcycle with the gas tank removed. Note: This tool is not to be used for long term fuel storage, for safety and to prevent accidental spillage, immediately drain gas back to approved long term storage container after use.
![Honda C70 Rotor and Sprocket Holder](/images/parts/100/35-9121.jpg)
Rotor and Sprocket Holder
Rotor and Sprocket Holder. Keeps rotors, flywheels and sprockets from rotating during removal and installation. The adjustable stop-screw keeps the tool open at a set distance. Holds sprockets and rotors with holes center to center at a minimum distance of 13mm and a maximum distance of 230mm's.
![Honda C70 Bearing Packer](/images/parts/100/35-9122.jpg)
Bearing Packer
Wheel Bearing Grease Packer. To pack a bearing, place the bearing on the piston, press down on the cap until the old grease is forced out and the new grease shows on top of the bearing. Grease stays in the tool cavity, not on your hands. Transparent, impact resistant cup allows easy grease level checks. Works on bearings up to 3-1/2" OD or 89mm.
![Honda C70 Carb Cleaning Tool Set](/images/parts/100/35-9125.jpg)
Carb Cleaning Tool Set
Carburetor Cleaning Tool Set. Includes 12 steel wire ends and a small file designed for cleaning nozzles and the tiny holes found in carburetor passages and jets.
![Honda C70 Vintage Motorcycle Tool Set](/images/parts/100/73-0078.jpg)
Vintage Motorcycle Tool Set
Vintage Motorcycle Tool Set. Have you lost the original tool set that came with your motorcycle? Well, we have a great alternative for you! This 8 pc set features many of the same tools that came with your bikes stock tool kit. To check out the exact contents included check out the picture. All contained within a durable pouch. Features Wrenches 8/10, 12/14 and 14/17 Note: These may not be 100% identical to your bikes OEM tool kit (check the photo for differences) but are very similar and several of the tools are likely identical. A great option at an amazing price!