HondaCB125S ► 

Refine Search Results
Honda CB125S Honda OEM Type Grips
USD$ 10.60
Fits: CB125S (75)

Honda OEM Type Grips

#02-2423 | Honda CB125S (1975)

Honda OEM Type Rubber Grip Set - Black - Closed end type for 7/8" bars. These are replica's of the original type grips from the factory. 135mm Length. Replaces OEM #' 53165-342-670 / 53166-342-670

Honda CB125S Sidecover Damper Rubber A
USD$ 1.45
Fits: Listed Models

Sidecover Damper Rubber A

#02-6532 | Honda CB125S (1973-1976), CB125S (1978-1982), CB125S (1984-1985)

Rubber Sidecover Damper A, Replaces OEM # 17247-303-000

Honda CB125S Seat Rubber "B"
USD$ 4.45
Fits: Listed Models

Seat Rubber "B"

#02-6533 | Honda CB125S (1973-1976), CB125S (1978-1982), CB125S (1984)

Seat Setting Rubber "B". This is one of the Rubber Settings Under the Seat. Replace those old worn Rubbers with a brand new one! Replaces OEM # 77205-286-000 Order the Quantity of Seat Rubber "B" your Bike Requires

Honda CB125S Piston Pin Clips
USD$ 1.15
Fits: Listed Models

Piston Pin Clips

#05-7201 | Honda CB125S (1973-1976), CB125S (1978-1982), CB125S (1984-1985)

Piston Pin Clips, 15mm (Pk/2) - Japanese made Superior Quality OEM Ref. # 94601-15000

Honda CB125S Kick Stand Stopper Rubber
USD$ 1.45
Fits: CB125S (73-75)

Kick Stand Stopper Rubber

#07-4624 | Honda CB125S (1973-1975)

Kick Stand Stopper Rubber "A" - Replaces OEM# 95011-61000.

Honda CB125S Passenger Rear Footrest Set
USD$ 18.70
Fits: Listed Models

Passenger Rear Footrest Set

#07-9999 | Honda CB125S (1975-1976), CB125S (1978-1982)

Passenger Rear Footrest Set/2, Replaces OEM # 50716-371-660 (Rubbers) and OEM # 50715-MA6-000 (Metal Pegs).

Honda CB125S Clutch Lever
USD$ 4.45
Fits: CB125S (76-78)

Clutch Lever

#08-0006 | Honda CB125S (1976-1978)

Clutch Lever OEM Ref # 53178-369-700 / 53190-329-010 / 53190-286-670

Honda CB125S Clutch Lever
USD$ 5.95
Fits: CB125S (79-82)

Clutch Lever

#08-0056 | Honda CB125S (1979-1982)

Clutch Lever OEM Ref # 53178-399-700 / 360-700-000 / 360-467-000 / 360-401-651

Honda CB125S Brake Lever
USD$ 5.62
Fits: CB125S (76-78)

Brake Lever

#08-0066 | Honda CB125S (1976-1978)

Brake Lever OEM Ref # 53170-216-670 / 53175-286-000 / 53170-286-670 / 53170-329-010 / 53170-369-700 / 53175-369-700

Honda CB125S Clutch Lever ~ GP Style
USD$ 5.95
Fits: Listed Models

Clutch Lever ~ GP Style

#08-0080 | Honda CB125S (1975-1976), CB125S (1978)

Clutch Lever - Custom GP Style in Silver, This Has More of a Bend/Kickback then the stock lever. Replaces OEM # 53178-369-700

Honda CB125S Turn Signal Lamp Gasket
USD$ 2.50
Fits: Listed Models

Turn Signal Lamp Gasket

#11-2085 | Honda CB125S (1973-1976), CB125S (1978-1979)

Turn Signal Lamp Gasket, Replaces OEM # 33443-268-671

Honda CB125S Turn Signal Replacement Lens
USD$ 3.00
Fits: Listed Models

Turn Signal Replacement Lens

#11-2110 | Honda CB125S (1973-1976), CB125S (1978-1979)

Turn Signal Replacement Lens (Amber) - Front or Rear OEM Ref # 33402-268-671

Honda CB125S Turn Signal Stem
USD$ 8.50
Fits: CB125S (76-79)

Turn Signal Stem

#11-2167 | Honda CB125S (1976-1979)

Front Signal Lamp Stay - Chrome. Body Length 65mm, Thread 25mm, Total Length 90mm. Note: We sell these in Various Lengths, Confirm this is the Size you would Like Before Purchase

Honda CB125S Tail Light Lens
USD$ 9.00
Fits: Listed Models

Tail Light Lens

#11-2258 | Honda CB125S (1973-1976), CB125S (1982-1984)

Tail Light Lens OEM Ref # 33702-329-671 / 33702-092-671

Honda CB125S Stock Type Reflector
USD$ 13.00
Fits: Listed Models

Stock Type Reflector

#11-2303 | Honda CB125S (1973-1976), CB125S (1978)

Stock Type Screw on Reflector, Replaces OEM # 33741-340-670

Honda CB125S Rear Signal Lamp Stay
USD$ 11.00
Fits: CB125S (79)

Rear Signal Lamp Stay

#11-2318 | Honda CB125S (1979)

Rear Signal Lamp Stay - Chrome Rear type - OEM Ref # 33441-369-000 125mm Long.

Honda CB125S Front Stop Switch
USD$ 6.00
Fits: Listed Models

Front Stop Switch

#12-0010 | Honda CB125S (1976), CB125S (1978)

Front Stop Switch & Safety Starter Switch OEM Ref # 35340-329-003 / 35340-102-003 / 35340-401-682 / 35340-329-000 / 35340-086-721

Honda CB125S Fuel Petcock
USD$ 9.95
Fits: Listed Models

Fuel Petcock

#12-0078 | Honda CB125S (1978-1981), CB125S (1982), CB125S (1984-1985)

Fuel Petcock Assembly, Replaces OEM# 16950-GF6-015 / 16950-163-035 / 16950-GW8-670 / 16950-149-025 / 16950-195-702

Honda CB125S High Performance Kibblewhite Black Diamond Intake Valve
USD$ 54.95
Fits: CB125S (73-75)

High Performance Kibblewhite Black Diamond Intake Valve

#12-0080 | Honda CB125S (1973-1975)

High Performance Kibblewhite Black Diamond Intake Valve. Replaces OEM# 14711-107-020. Made in the USA by Kibblewhite who have been making High Quality Performance parts for 75+ years. All Black Diamond Stainless steel valves are impregnated by a special German process to a depth of .002, with a surface build up of .0002. This Black Diamond process improves wear properties, reduces friction, and provides resistance to corrosion and wear that is superior to chrome and nickel electrolysis plating. Each valve is designed using Finite Element Analysis software, and profiles are tested on our computerized flow bench. Black Diamond Valves are lightweight, strong, one piece forgings with profiles that provide excellent flow characteristics. Sold Each, Order the Quantity you Require

Honda CB125S Oil Drain Plug
USD$ 9.00
Fits: CB125S (73-84)

Oil Drain Plug

#15-0016 | Honda CB125S (1973-1984)

Magnetic Oil Drain Plug 12mm Diameter 1.50 Thread Pitch OEM Ref # 92800-12000 / 92066-1174 / 01107-12208

Honda CB125S Mounting Rubber
USD$ 2.00
Fits: Listed Models

Mounting Rubber

#17-6942 | Honda CB125S (1976-1982), CB125S (1976-1978)

Mounting Rubber, Replaces OEM # 17245-107-010

Honda CB125S Gas Cap Rubber Seal
USD$ 6.50
Fits: CB125S (73-75)

Gas Cap Rubber Seal

#20-0097 | Honda CB125S (1973-1975)

Gas Cap Rubber Seal, Replaces OEM # 17631-329-003

Honda CB125S Carb Float
USD$ 14.00
Fits: Listed Models

Carb Float

#20-6500 | Honda CB125S (1973-1975), CB125S (1976)

Brass Carb Float Fits VM29/33 Smoothbores & most OEM CV/VM Mikuni carbs Used on Yamaha & Kawasaki up to 1980 and some Honda's

Honda CB125S Fork Seals
USD$ 13.00
Fits: CB125S (72-85)

Fork Seals

#27-1008 | Honda CB125S (1972-1985)

Fork Seals Pk/2 27 x 39 x 10.5

Honda CB125S Brake Rod Spring
USD$ 2.95
Fits: Listed Models

Brake Rod Spring

#29-7006 | Honda CB125S (1973-1976), CB125S (1978-1982), CB125S (1984-1985)

Brake Rod Spring. Replaces OEM # 95014-73100

Honda CB125S Headlight Adjusting Screw & Spring Set
USD$ 5.00
Fits: CB125S (85)

Headlight Adjusting Screw & Spring Set

#29-7011 | Honda CB125S (1985)

Headlight Adjusting Screw & Spring Set. Each Set Includes One Screw and One Spring. Replaces OEM # 33103-346-670 (Screw) and OEM # 33107-300-003 (Spring)

Honda CB125S Center Stand Spring
USD$ 5.00
Fits: CB125S (84-85)

Center Stand Spring

#33-0004 | Honda CB125S (1984-1985)

Center Stand Spring. Replaces OEM # 95014-71702

Honda CB125S Clutch Center Nut Removal Tool
USD$ 25.00
Fits: CB125S (84-85)

Clutch Center Nut Removal Tool

#35-0076 | Honda CB125S (1984-1985)

Clutch Center Nut Removal Tool, The perfect tool for easier removal/fitting, without damaging the special locking nut. Both ends with 1/2 drive extension bar, Diameter 20 x 24.

Honda CB125S Float Needle & Seat
USD$ 10.00
Fits: CB125S (73-76)

Float Needle & Seat

#48-5009 | Honda CB125S (1973-1976)

Float Needle & Seat High Quality - Made In Japan OEM Ref # 16011-302-000

Honda CB125S Float Needle
USD$ 6.00
Fits: CB125S (84-85)

Float Needle

#48-5011 | Honda CB125S (1984-1985)

Float Needle High Quality - Made In Japan OEM Ref # 16155-413-751 / 16155-397-971

Honda CB125S Lens Screw
USD$ 4.00
Fits: Listed Models

Lens Screw

#49-0145 | Honda CB125S (1976), CB125S (1978)

Tail Light Lens Screws, Pack of 10 Screws. Replaces OEM # 93500-04055-4J ISO Std. Pitch - Steel Plated Size: 4 x 55mm

Honda CB125S Tappet Adjuster Screw & Nut Set
USD$ 4.50
Fits: CB125S (81-82)

Tappet Adjuster Screw & Nut Set

#49-0784 | Honda CB125S (1981-1982)

Tappet Adjuster Screw & Nut Set. Each Set includes one Tappet Adjuster Screw and one Nut. Replaces OEM # 90012-426-000 (Adjuster), OEM # 90206-250-000 (Nut). Note: Order the Quantity of Sets your Bike Requires

Honda CB125S Clymer Service Manual
USD$ 32.00
Fits: Listed Models
Out of Stock

Clymer Service Manual

#61-0049 | Honda CB125S (1973-1978), CB125S (1968-1970)

Clymer Service Manual. Clymer motorcycle repair manuals are written specifically for the do-it-yourself enthusiast. From basic maintenance to troubleshooting to complete overhaul, Clymer manuals provide the information you need.

Honda CB125S OEM Type Gas/Fuel Tank Cap
USD$ 27.00
Fits: CB125S (84-85)

OEM Type Gas/Fuel Tank Cap

#65-6508 | Honda CB125S (1984-1985)

OEM Type Gas/Fuel Tank Cap with Gasket and 2 Keys. Replaces OEM # 17620-460-067

Honda CB125S Seat Lock with Keys
USD$ 19.00
Fits: CB125S (85)

Seat Lock with Keys

#73-0140 | Honda CB125S (1985)

Seat Lock with Keys, Replaces OEM # 77230-399-007 This seat lock works perfect for the bikes listed but the locking mechanism sticks out a bit farther then the OEM type. If you have lost your old key you have to remove the seat lock bracket and assembly. This can be done with a short 10mm wrench or socket, once that's done the rest is easy.

Honda CB125S Helmet Holder Lock w Keys
USD$ 20.00
Fits: Listed Models

Helmet Holder Lock w Keys

#73-0141 | Honda CB125S (1973-1975), CB125S (1976), CB125S (1978-1982), CB125S (1984)

Helmet Holder Lock with Keys, Replaces OEM # 50710-086-007

Honda CB125S Footrest Rubbers
USD$ 15.00
Fits: CB125S (73-75)

Footrest Rubbers

#73-0183 | Honda CB125S (1973-1975)

Footrest Rubbers (Set/2) - OEM Ref # 50661-110-000

Honda CB125S Passenger Rear Footrest Rubber Set
USD$ 15.00
Fits: Listed Models

Passenger Rear Footrest Rubber Set

#73-0184 | Honda CB125S (1975-1976), CB125S (1978-1982), CB125S (1984-1985)

Passenger Rear Footrest Rubber Set/2, Replaces OEM # 50716-371-660

Honda CB125S Passenger Rear Footrest Rubber Set
USD$ 10.00
Fits: CB125S (73-74)

Passenger Rear Footrest Rubber Set

#73-0185 | Honda CB125S (1973-1974)

Passenger Rear Footrest Rubber Set/2, Replaces OEM # 95011-31000

Honda CB125S Stock Type Gearshift Lever Rubber
USD$ 5.00
Fits: CB125S (85)

Stock Type Gearshift Lever Rubber

#73-0838 | Honda CB125S (1985)

Stock Type Gearshift Lever Rubber, Replaces OEM # 24781-419-000

Honda CB125S Brake Rod Joint
USD$ 2.00
Fits: Listed Models

Brake Rod Joint

#73-0843 | Honda CB125S (1978-1982), CB125S (1984-1985)

Brake Rod/Arm Joint, Replaces OEM # 95015-32001

Honda CB125S Rear Brake Light Stop Switch Spring
USD$ 5.00
Fits: Listed Models

Rear Brake Light Stop Switch Spring

#73-0848 | Honda CB125S (1973-1976), CB125S (1978-1980), CB125S (1984-1985)

Rear Brake Light Stop Switch Spring. This is the Spring that Attaches to the Rear Stop Light Switch. Replaces OEM # 35357-107-010

Honda CB125S Carb Float & Pin
USD$ 21.95
Fits: CB125S (84-85)

Carb Float & Pin

#73-0869 | Honda CB125S (1984-1985)

Carb Float & Pin, Replaces OEM # 16013-439-921 Sold Each, Order the Quantity you Require

Honda CB125S Tail Light Lens Screws
USD$ 3.00
Fits: CB125S (84-85)

Tail Light Lens Screws

#73-0898 | Honda CB125S (1984-1985)

Tail Light Lens Screws, 2 Piece Set, Replaces OEM # 93901-34710

Honda CB125S Intake Valve
USD$ 14.00
Fits: CB125S (73-75)

Intake Valve

#73-0981 | Honda CB125S (1973-1975)

Intake Valve - Replaces OEM # 14711-107-020 Made in Japan

Honda CB125S Handlebar Clutch Lever Pivot Bolt & Nut Set
USD$ 4.00
Fits: Listed Models

Handlebar Clutch Lever Pivot Bolt & Nut Set

#73-0996 | Honda CB125S (1976), CB125S (1978-1982)

Handlebar Clutch Lever Pivot Bolt & Nut Set. This is the Set that Fastens the Clutch Lever in Place. Includes One Bolt with One Nut. Replaces OEM # 90114-310-000 (Bolt) and OEM # 94001-06200-0S (Nut).

Honda CB125S Handlebar Clutch Lever Pivot Bolt & Nut Set
USD$ 5.00
Fits: CB125S (84-85)

Handlebar Clutch Lever Pivot Bolt & Nut Set

#73-0998 | Honda CB125S (1984-1985)

Handlebar Clutch Lever Pivot Bolt & Nut Set. This is the Set that Fastens the Clutch Lever in Place. Includes One Bolt with One Nut. Replaces OEM # 90113-422-000 (Bolt) and OEM # 94002-06000-0S (Nut).

Honda CB125S Front Cable/ Stop Switch Clip
USD$ 4.00
Fits: CB125S (73-75)

Front Cable/ Stop Switch Clip

#73-1116 | Honda CB125S (1973-1975)

Front Cable Clip, This Clip Holds the Stop Switch Wires to the Cable to Keep Things Tidy. Replaces OEM # 45465-270-000

▼ Show Universal Parts ▼
The names Honda, Yamaha, Kawasaki, Suzuki and any other trade names or symbols belonging to each respective corporation are stated for reference purposes only. The products on this site are after market (not OEM) replacement parts and accessories only. We have no relationship to the listed companies.