Honda ► CB175K ►
-
Here’s our hand-picked list of electrical parts for your Honda CB175K with universal parts included that match “honda sl125”►
- Honda
![Honda CB175K Denso Ignition Contact Points](/images/parts/100/14-0004.jpg)
Denso Ignition Contact Points
Contact Points (1pc.) - Replaces OEM # 30202-107-004 / 30202-216-004 / 30202-107-154 These points are for Nippondenso ignitions Only. They are NOT for Hitachi or Kokusan Ignitions. Please check which type you have before ordering. Honda used different ignition systems on some of the same years of bikes.
![Honda CB175K Stock Type Battery Band](/images/parts/100/99-4991.jpg)
Stock Type Battery Band
Stock Type Battery Band, Replaces OEM# 95012-15001 Band Overall Size: 5.25" (133mm) Measuring from the inside of the brackets.
![Honda CB175K Front Cable/ Stop Switch Clip](/images/parts/100/73-1116.jpg)
Front Cable/ Stop Switch Clip
Front Cable Clip, This Clip Holds the Stop Switch Wires to the Cable to Keep Things Tidy. Replaces OEM # 45465-270-000
![Honda CB175K Stock Type Reflector](/images/parts/100/11-2303.jpg)
Stock Type Reflector
Stock Type Screw on Reflector, 6mm thread. Replaces OEM # 33741-340-670
![Honda CB175K Tail Light Lens](/images/parts/100/11-2252.jpg)
Tail Light Lens
Red Tail Light Lens with Amber Side Reflectors. OEM Ref # 33702-077-671
![Honda CB175K Starter Solenoid Relay](/images/parts/100/09-6582.jpg)
Starter Solenoid Relay
Starter Solenoid Relay, Replaces OEM# 35850-371-670 / 35850-306/670 / 35850-HA7-670
![Honda CB175K Headlight Setting Collar](/images/parts/100/07-4645.jpg)
Headlight Setting Collar
Headlight Setting Collar, Replaces OEM# 61304-292-000 Sold Each, order the quantity you require
![Honda CB175K Turn Signal Pinch Bolt Set](/images/parts/100/73-0840.jpg)
Turn Signal Pinch Bolt Set
Turn Signal Pinch Bolt Set. Includes 2X Chrome Bolts, 2X Hex Nuts and 4X Flat Washers. This set is used to clamp the turn signal onto the stem. Some models originally had a 25mm long bolt but these will interchange. This set includes hardware for 2 turn signals. If you need enough for all 4 signals please purchase 2 sets.
![Honda CB175K Seat Lock Bar Assembly](/images/parts/100/73-1070.jpg)
Seat Lock Bar Assembly
Seat Lock Bar Assembly, Replaces OEM# 77220-340-003 / 77220-340-011
![Honda CB175K Bar Switch Assembly ~ Left (Clutch) Side](/images/parts/100/12-0306.jpg)
Bar Switch Assembly ~ Left (Clutch) Side
Bar Switch Assembly ~ Left (Clutch) Side - Black. Replaces OEM # 35250-300-033
![Honda CB175K Ignition Coil](/images/parts/100/17-6822.jpg)
Ignition Coil
Ignition Coil 100MM C-C Mounting Points OEM Ref # 30400-306-672 / 30400-306-672
![Honda CB175K Hot Shot Rectifier / Regulator](/images/parts/100/24-2089.jpg)
Hot Shot Rectifier / Regulator
Rick's Electric Brand Hot Shot Rectifier / Regulator. Replaces OEM# 31400-292-670 / 31700-455-671 / 31700-292-008. This combination unit works with the stock stator to provide an upgraded charging system; it allows the stator to charge at full capacity 100% of the time! This is a direct plug-in combination rectifier-regulator that looks the same as the OE version & will mount in the same location as the OE rectifier for easy install. This unit is NOT compatible with lithium-ion batteries. If you have a Lithium Ion battery installed we sell a lithium ion version of this item.
![Honda CB175K Tail Light Assembly](/images/parts/100/11-2147.jpg)
Tail Light Assembly
Tail Light Assembly. Includes Brake Light Lens, Back Plate, Screws, Gasket, Wires, Connector and Dual Filament Bulb. Replaces OEM # 33700-292-671 / 33700-235-673 / 33701-300-671 / 33701-307-670 Two Bolt Back Mounting Bolt Pattern (Approx 96mm Center to Center), 2 Wires, Ready to Mount to your Bike!
![Honda CB175K Ignition Switch Nut Tool](/images/parts/100/35-9119.jpg)
Ignition Switch Nut Tool
Ignition Switch Nut Tool, used to loosen and tighten the igntion switch nut properly without causing any damage to the switch.
![Honda CB175K Tail Light Lens Gasket](/images/parts/100/11-2168.jpg)
Tail Light Lens Gasket
Tail Light Lens Gasket - Replaces OEM# 33709-077-671
![Honda CB175K Ignition Switch Assembly](/images/parts/100/12-0060.jpg)
Ignition Switch Assembly
Ignition Switch Assembly With round wire harness to switch connector. Round plug 6 Hole, 4 Wire Type. OEM Ref # 35100-303-007 / 35100-292-003 / 35100-292-013 Note: We offer an ignition switch nut tool on our site to easily loosen or tighten the ignition switch nut without causing damage to the switch
![Honda CB175K Tail Light Lens Gasket](/images/parts/100/11-2163.jpg)
Tail Light Lens Gasket
Tail Light Lens Gasket - Replaces OEM# 33709-341-671
![Honda CB175K Front Signal Lamp Stay](/images/parts/100/73-1106.jpg)
Front Signal Lamp Stay
Front Signal Lamp Stay - Chrome. Body Length 40mm, Thread 30mm, Total Length 70mm. Note: We sell these in Various Lengths, Confirm this is the Size you would Like Before Purchase
![Honda CB175K Turn Signal Replacement Lens](/images/parts/100/11-2110.jpg)
Turn Signal Replacement Lens
Turn Signal Replacement Lens (Amber) - Front or Rear OEM Ref # 33402-268-671
![Honda CB175K Turn Signal Stem](/images/parts/100/11-2167.jpg)
Turn Signal Stem
Front Signal Lamp Stay - Chrome. Body Length 65mm, Thread 25mm, Total Length 90mm. Note: We sell these in Various Lengths, Confirm this is the Size you would Like Before Purchase
![Honda CB175K Front/Rear Signal Lamp ~ 1 Wire Type](/images/parts/100/11-2245.jpg)
Front/Rear Signal Lamp ~ 1 Wire Type
Signal Lamp - Amber - 12v - 1 wire for Front or Rear - Replaces OEM# 33600-447-000 / 33600-447-P00. Please double check you require the 1 wire type before purchasing Stem *Our Part Number 11-2167*
![Honda CB175K Turn Signal Lamp ~ 2 Wire Type](/images/parts/100/11-2122.jpg)
Turn Signal Lamp ~ 2 Wire Type
Signal Lamp - Amber - 12v - 2 wire for Front or Rear - Replaces OEM# 33400-341-702 / 33400-413-671. Please double check you require the 2 wire type before purchasing Stem *Our Part Number 11-2167*