Honda ► CB350G ►
-
Here’s our hand-picked list of parts and accessories for your Honda CB350G with universal parts included►
- Honda
Seat Rubber "B"
Seat Setting Rubber "B". This is one of the Rubber Settings Under the Seat. Replace those old worn Rubbers with a brand new one! Replaces OEM # 77205-286-000 Order the Quantity of Seat Rubber "B" your Bike Requires
Kick Stand Stopper Rubber
Kick Stand Stopper Rubber "A" - Replaces OEM# 95011-61000.
Rear Fuel Tank Holder Rubber
Rear Fuel Tank Holder Rubber, Replaces OEM# 17613-286-000
Replacement Mirror
Replacement Mirror (R.H) 4 1/2" Diameter, 10mm Thread. Replaces OEM# 88110-333-611
Replacement Mirror
Replacement Mirror (L.H) 4 1/2" Diameter, 10mm Thread. Replaces OEM# 88120-333-611
Rear Shock Swingarm Bushing
Rear Shock Swingarm Bushing, Replaces OEM# 40548-268-000 19mm Long, 22mm OD, 10mm ID. Sold Each, Order the Quantity you Require
Seat Cover
Replacement Seat Cover with Reinforced Passenger Strap (No trim or hardware included just re-use existing hardware). There is not a "Honda" stencil on the rear of the cover due to copyright. There is a layer of foam sewn into the top of the seat cover to improve ride comfort and smooth out any defects in your original seat foam. Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Comes with complete installation instructions as well as step by step instructions on how to repair damaged seat foam. This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
Side Cover Emblem ~ Left Side
Side Cover Emblem with 2 Attachment Clips ~ For the Left Side Cover - Replaces OEM# 87126-455-000 These are great quality made of a solid cast metal. Note: This is for the Left side emblem, double check the direction the Honda wing is facing to be sure this is the side you require (other side sold separately).
Side Cover Emblem ~ Right Side
Side Cover Emblem with 2 Attachment Clips ~ For the Right Side Cover - Replaces OEM# 87125-455-000 These are great quality made of a solid cast metal. Note: This is for the Right side emblem, double check the direction the Honda wing is facing to be sure this is the side you require (other side sold separately).
Side Stand Spring
Side Stand Spring, Replaces OEM # 95014-72402
Shock Absorber Joint Rubber Set/2
Shock Absorber Joint Rubber Set/2. Replaces OEM # 52484-292-000
Seat Lock with Keys
Seat Lock with Keys, Replaces OEM # 77230-399-007 / 77230-107-711 This seat lock works perfect for the bikes listed but the locking mechanism sticks out a bit farther then the OEM type. If you have lost your old key you have to remove the seat lock bracket and assembly. This can be done with a short 10mm wrench or socket, once that's done the rest is easy.
Front Fork Top Bridge / Triple Tree Washer Kit
Front Fork Top Bridge / Triple Tree Washer Kit of 2 Washers. These washers are needed in order to avoid broken top triple trees when you tighten up your fork tube clamps. Replace # OEM 53235-300-000
Side Stand Pivot Bolt & Nut Set
Side Stand Pivot Bolt & Nut Set, This is the Set Used to Fasten the Side Stand in Place. Replaces OEM # 90108-283-000 (Bolt) and 94002-10000-0S (Nut).
Side Cover Emblem Fixing Nut Pk/2
Side Cover Emblem Fixing Nut (3mm) Pk/2, Used to Attach the Side Cover Emblems. Replaces OEM # 90313-567-000 Check your bike to see the quantity you require
Seat Lock Bar Assembly
Seat Lock Bar Assembly, Replaces OEM# 77220-340-003 / 77220-340-011
Mounting Clamp ~ Black
Black Speedo/Tach/Mirror Mounting Clamp 2 Piece Die-Cast Alloy Clamp With 10mm RH Thread Fits 7/8" Bars
Viper Cafe Fairing
Universal Gloss Black Viper Cafe Racer Fairing with Smoked Windshield. Designed to protect the rider from wind pressure and debris. Mounting hardware included. Fits: Bikes With 7" or Smaller Headlights
Viper Cafe Fairing Shield
Replacement Shield Shield For Viper Café Fairing 04-0101
Custom Grey Windshield
Custom Grey Acrylic Windshield. Includes 2 fully adjustable 7/8" clamps attached to the windshield which can be adjusted in just about any angle and direction for an easy install. Width 18.3", Height 22"
Custom Clear Windshield
Custom Clear Acrylic Windshield. Includes 2 fully adjustable 7/8" clamps attached to the windshield which can be adjusted in just about any angle and direction for an easy install. Width 18.3", Height 22"
Custom Grey Windshield
Custom Grey Acrylic Windshield. Includes 2 fully adjustable 7/8" clamps attached to the windshield which can be adjusted in just about any angle and direction for an easy install. Width 16.25", Height 18"
Custom Clear Windshield
Custom Clear Acrylic Windshield. Includes 2 fully adjustable 7/8" clamps attached to the windshield which can be adjusted in just about any angle and direction for an easy install. Width 16.25", Height 18"
Venom Cafe Racer Fairing
Universal Gloss Black Venom Cafe Racer Fairing with Smoked Windshield. Designed to protect the rider from wind pressure and debris. Mounts by using the side bolts of your headlight. Fits: Bikes With 7" or Smaller Headlights
Chrome Goldwing Emblem Set/2
Chrome 3D Goldwing Emblem Set/2. Features a Sticker Back for Easy Application. These Custom Emblems Can Be Used Anywhere! 16.5cm Long x 1cm Width x 0.40cm Thickness