Notice: During this worldwide fight against COVID-19 we will continue shipping orders daily with a very limited workforce and will complete daily workplace sanitation to prevent the spread of this disease. Thank you for your support during this time and we hope you and your family stay safe.

HondaCB360 ► 

Refine Search Results
Honda CB360 Honda OEM Type Grips
USD$ 10.60
Fits: CB360 (74)

Honda OEM Type Grips

#02-2423 | Honda CB360 (1974)

Honda OEM Type Rubber Grip Set - Black - Closed end type for 7/8" bars. These are replica's of the original type grips from the factory. 135mm Length. Replaces OEM #' 53165-342-670 / 53166-342-670

Honda CB360 Kickstart Rubber
USD$ 1.45
Fits: CB360 (74)

Kickstart Rubber

#02-2476 | Honda CB360 (1974)

Kickstart Rubber OEM Ref # 28311-329-000

Honda CB360 Turn Signal Replacement Lens
USD$ 3.00
Fits: CB360 (76)

Turn Signal Replacement Lens

#11-2110 | Honda CB360 (1976)

Turn Signal Replacement Lens (Amber) - Front or Rear OEM Ref # 33402-268-671

Honda CB360 Tail Light Lens
USD$ 13.00
Fits: CB360 (74)

Tail Light Lens

#11-2259 | Honda CB360 (1974)

Tail Light Lens OEM Ref # 33702-341-671

Honda CB360 Engine Gasket Set
USD$ 54.00
Fits: CB360 (73-77)

Engine Gasket Set

#18-0189 | Honda CB360 (1973-1977)

Complete Engine Gasket Set Includes all Engine Gaskets High Quality - Made In Italy by Athena Athena Product # P400210850360

Honda CB360 Gas Cap Rubber Seal
USD$ 7.00
Fits: CB360 (74)

Gas Cap Rubber Seal

#20-0039 | Honda CB360 (1974)

Gas Cap Rubber Seal, Replaces OEM # 17534-323-300

Honda CB360 Gas/Fuel Tank Chrome Cap
USD$ 43.00
Fits: CB360 (74)

Gas/Fuel Tank Chrome Cap

#20-0045 | Honda CB360 (1974)

Gas/Fuel Tank Chrome Cap with Gasket and Hinge Pin (with E-Clip which Allows for easy installation). Replaces OEM # 17510-323-310

Honda CB360 Condenser
USD$ 18.00
Fits: CB360 (74-76)

Condenser

#26-5107 | Honda CB360 (1974-1976)

Condenser OEM Ref # 30250-369-004 / 30250-369-003

Honda CB360 Fork Seals
USD$ 14.00
Fits: Listed Models

Fork Seals

#27-1019 | Honda CB360 (1976-1977), CB360 (1975-1976)

Fork Seals Set/2 33 X 46 X 11

Honda CB360 Billet Aluminum Upper Triple Tree Clamp
USD$ 138.00
Fits: CB360 (74)

Billet Aluminum Upper Triple Tree Clamp

#28-6915 | Honda CB360 (1974)

Custom Billet Aluminum Machined Upper Triple Tree Clamp. This billet triple has 2X 6mm mounting bosses 50mm apart on the underside of the top triple to accommodate various aftermarket and custom designed instrument mounts for your aftermarket gauges. Designed so the top triple has a rounded top edge with a stylish inset and makes an excellent replacement for the stock cast item when using clip-on bars! This piece was designed to make it very easy for the average Cafe builder to modify their motorcycle. Very High quality, machined in North America. Confirm you are using 33mm Forks before purchasing. Clip on bars not included and your stock bars will NOT mount to this piece.

Honda CB360 Reservoir Cap & Diaphragm
USD$ 20.00
Fits: CB360 (74-75)

Reservoir Cap & Diaphragm

#29-0080 | Honda CB360 (1974-1975)

Reservoir Cap & Diaphragm Round Thread On Type OEM Ref # 43515-MJ6-006 / 45520-300-000

Honda CB360 Front Brake Caliper Piston Sealing Ring
USD$ 6.00
Fits: CB360 (74)

Front Brake Caliper Piston Sealing Ring

#29-0527 | Honda CB360 (1974)

Front Brake Caliper Piston Sealing Ring, Replaces OEM # 45108-300-003

Honda CB360 Rear Brake Shoes
USD$ 20.00
Fits: CB360 (75-76)

Rear Brake Shoes

#29-3120 | Honda CB360 (1975-1976)

Rear Brake Shoes Pk/2 Diameter: 159mm Width: 30mm OEM Ref # 43120-KG4-006

Honda CB360 Clutch Spring Set
USD$ 17.50
Fits: CB360 (74)

Clutch Spring Set

#39-1047 | Honda CB360 (1974)

Clutch Spring Set

Honda CB360 Air Screw Needle O-Ring
USD$ 1.95
Fits: CB360 (74)
Out of Stock

Air Screw Needle O-Ring

#48-5043 | Honda CB360 (1974)

Air Screw Needle O-Ring. 2.8mm x 1.2mm. Note: sold each, order the quantity you require

Honda CB360 Shock Absorber Nut
USD$ 3.00
Fits: CB360 (74)

Shock Absorber Nut

#49-0779 | Honda CB360 (1974)

Shock Absorber Nut, Used when Installing Shocks. Replaces OEM # 90309-315-000 Note: Nuts sold Each, order the quantity you require

Honda CB360 Front Sprocket Lock Plate Set
USD$ 6.00
Fits: CB360 (74)

Front Sprocket Lock Plate Set

#49-0782 | Honda CB360 (1974)

Front Sprocket Lock Plate with 2 Lock Plate Bolts. It's Always good to replace these when installing a new front sprocket. Replaces OEM # 23811-292-000 (Plate) and OEM # 92101-06016-0A (Bolts) X2.

Honda CB360 Tappet Adjuster Screw & Nut Set
USD$ 4.50
Fits: CB360 (74)

Tappet Adjuster Screw & Nut Set

#49-0784 | Honda CB360 (1974)

Tappet Adjuster Screw & Nut Set. Each Set includes one Tappet Adjuster Screw and one Nut. Replaces OEM # 90012-426-000 (Adjuster), OEM # 90206-250-000 (Nut). Note: Order the Quantity of Sets your Bike Requires

Honda CB360 Side Stand Spring
USD$ 4.50
Fits: CB360 (74)

Side Stand Spring

#49-0788 | Honda CB360 (1974)

Side Stand Spring, Replaces OEM # 95014-72402

Honda CB360 Fork Cap O-Ring Set/2
USD$ 2.50
Fits: CB360 (74)

Fork Cap O-Ring Set/2

#49-0790 | Honda CB360 (1974)

Fork Cap O-Ring Set of 2. 23mm x 2.8mm size. Replaces OEM # 94608-50000 X2.

Honda CB360 Tachometer Cable
USD$ 13.00
Fits: CB360 (74)

Tachometer Cable

#51-2401 | Honda CB360 (1974)

Tachometer Cable - Black - OEM Ref. # 37260-149-000 (700mm), 37260-KB7-010 / 37250-149-000 Made in Japan

Honda CB360 Clymer Service Manual
USD$ 32.00
Fits: CB360 (75-76)

Clymer Service Manual

#61-0051 | Honda CB360 (1975-1976)

Clymer Service Manual. Clymer motorcycle repair manuals are written specifically for the do-it-yourself enthusiast. From basic maintenance to troubleshooting to complete overhaul, Clymer manuals provide the information you need.

Honda CB360 Custom Black Gas/Fuel Tank Cap ~ Joker Machine
USD$ 109.95
Fits: CB360 (74)

Custom Black Gas/Fuel Tank Cap ~ Joker Machine

#73-1156 | Honda CB360 (1974)

Joker Machine Brand ~ Custom Black Gas/Fuel Tank Flip Up Billet Cap. Includes Cap with a spring loaded alloy flange, replaceable rubber gasket and alloy screw attachment. Replaces OEM # 17510-323-310 Installs easily onto the tank hinges with an alloy screw (not rivets found on the stock set-up) in minutes. Lightweight design is made from a solid block of 1" thick Billet aluminum. Works with stock style latching mechanisms (Sold Separately). High quality CNC machined cap made in the U.S.A.

▼ Show Universal Parts ▼
The names Honda, Yamaha, Kawasaki, Suzuki and any other trade names or symbols belonging to each respective corporation are stated for reference purposes only. The products on this site are after market (not OEM) replacement parts and accessories only. We have no relationship to the listed companies.