HondaCB360K ► 

Refine Search Results
Honda CB360K Side Cover Rubber
USD$ 2.20
Listed Models

Side Cover Rubber

#01-8999 | Honda CB360K (1974)

Side Cover Rubber, Replaces OEM# 83621-333-000 2 Used Per Side Cover, Order The Quantity You Require

USD$ 2.20
Listed Models
Honda CB360K Gas/Fuel Tank Cap Latch Assembly ~ Black
USD$ 18.45
Listed Models

Gas/Fuel Tank Cap Latch Assembly ~ Black

#01-9934 | Honda CB360K (1974)

Gas/Fuel Tank Cap Latch Assembly, Includes Black Latch with Return Spring, Latch Mounting Pin and C-Clip.

USD$ 18.45
Listed Models
Honda CB360K Tappet Covers
USD$ 4.65
Listed Models

Tappet Covers

#01-9980 | Honda CB360K (1974)

Finned Tappet Cover - Sold Each Comes With O-Ring gasket High Quality Chrome Finish

USD$ 4.65
Listed Models
Honda CB360K Throttle Sleeve
USD$ 5.90
Listed Models

Throttle Sleeve

#02-2462 | Honda CB360K (1974)

Nylon Throttle Sleeve - Replaces OEM # 53141-300-010

USD$ 5.90
Listed Models
Honda CB360K Starter Motor Seal
USD$ 3.75
Listed Models

Starter Motor Seal

#03-0784 | Honda CB360K (1974)

Starter Motor Seal - 60 x 1.4 - Replaces OEM# 31206-286-158 / 31206-402-008

USD$ 3.75
Listed Models
Honda CB360K Side Cover Rubber Grommet
USD$ 2.20
Listed Models

Side Cover Rubber Grommet

#03-0785 | Honda CB360K (1974)

Side Cover Rubber / Headlight Stay Grommet, Replaces OEM# 17245-369-000 Fits: Honda CB360K (1974) - 1 Used Per Side Cover, CB360G (1974) - 1 Used Per Side Cover, CB360T (1975) - Frame #2100001 + - 1 Used Per Side Cover, CB360T (1976) - 1 Used Per Side Cover, CL360K (1974-75) - 1 Used Per Side Cover CB400F (1975-77) Supersport - 1 Used Per Side Cover + 2 Also used on the Headlight Stay.

USD$ 2.20
Listed Models
Honda CB360K Headlight Setting Collar
USD$ 2.90
Listed Models

Headlight Setting Collar

#07-4645 | Honda CB360K (1974)

Headlight Setting Collar, Replaces OEM# 61304-292-000 Sold Each, order the quantity you require

USD$ 2.90
Listed Models
Honda CB360K Matte Black  ~ OEM Type Gas/Fuel Tank Cap With Latch Assembly
USD$ 48.05
Listed Models

Matte Black ~ OEM Type Gas/Fuel Tank Cap With Latch Assembly

#07-9967 | Honda CB360K (1974)

Matte Black OEM Type Gas/Fuel Tank Cap with Gasket, Hinge Pin (with E-Clip which Allows for easy installation) and Gas/Fuel Tank Cap Latch Assembly, Includes Latch, Return Spring, Latch Mounting Pin and C-Clip. Replaces OEM # 17510-323-310

USD$ 48.05
Listed Models
Honda CB360K Front Brake Pipe
USD$ 9.60
Listed Models

Front Brake Pipe

#07-9972 | Honda CB360K (1974)

Front Brake Pipe - Replaces OEM# 45128-317-701 Aprox 8" Total Length.

USD$ 9.60
Listed Models
Honda CB360K Clutch Lever ~ GP Style
USD$ 5.90
Listed Models

Clutch Lever ~ GP Style

#08-0080 | Honda CB360K (1974)

Clutch Lever - Custom GP Style in Silver, This Has More of a Bend/Kickback then the stock lever. Replaces OEM # 53178-369-700

USD$ 5.90
Listed Models
Honda CB360K 6 1/2" Headlamp Unit
USD$ 50.30
Listed Models

6 1/2" Headlamp Unit

#09-0028 | Honda CB360K (1974)

6 1/2" Outer Diameter Headlamp Unit. This unit can be used with various headlights requiring a 6 1/2" headlamp. Can replace OEM# 33120-333-670 / 33100-333-671 but this unit does not have any mounting clips on the rear sides of the headlamp unit. Does Not Include mounting hardware. This unit comes with a H4 60/55w bulb, all glass lens with pilot light.

USD$ 50.30
Listed Models
Honda CB360K Turn Signal Lamp Gasket
USD$ 2.90
Listed Models

Turn Signal Lamp Gasket

#11-2085 | Honda CB360K (1974)

Turn Signal Lamp Gasket, Replaces OEM # 33443-268-671

USD$ 2.90
Listed Models
Honda CB360K Turn Signal Replacement Lens
USD$ 2.90
Listed Models

Turn Signal Replacement Lens

#11-2110 | Honda CB360K (1974)

Turn Signal Replacement Lens (Amber) - Front or Rear OEM Ref # 33402-268-671

USD$ 2.90
Listed Models
Honda CB360K Tail Light Lens Gasket
USD$ 3.65
Listed Models

Tail Light Lens Gasket

#11-2163 | Honda CB360K (1974)

Tail Light Lens Gasket - Replaces OEM# 33709-341-671

USD$ 3.65
Listed Models
Honda CB360K Stock Type Reflector
USD$ 13.30
Listed Models

Stock Type Reflector

#11-2303 | Honda CB360K (1974)

Stock Type Screw on Reflector, 6mm thread. Replaces OEM # 33741-340-670

USD$ 13.30
Listed Models
Honda CB360K Rear Signal Lamp Stay
USD$ 11.80
Listed Models

Rear Signal Lamp Stay

#11-2318 | Honda CB360K (1974)

Rear Signal Lamp Stay - Chrome Rear type - OEM Ref # 33441-369-000 125mm Long.

USD$ 11.80
Listed Models
Honda CB360K Stop Light Switch
USD$ 5.90
Listed Models

Stop Light Switch

#12-0008 | Honda CB360K (1974)

Rear Stop Light Switch OEM Ref # 35350-292-003 / 35350-KJ9-405

USD$ 5.90
Listed Models
Honda CB360K Front Stop Switch
USD$ 5.15
Listed Models

Front Stop Switch

#12-0010 | Honda CB360K (1974)

Front Stop Switch & Safety Starter Switch OEM Ref # 35340-329-003 / 35340-102-003 / 35340-401-682 / 35340-329-000 / 35340-086-721

USD$ 5.15
Listed Models
Honda CB360K Custom Triple Tree Steel Nut ~ Joker Machine
USD$ 33.25
Listed Models
Out of Stock
Email Me When Available

Custom Triple Tree Steel Nut ~ Joker Machine

#12-0071 | Honda CB360K (1974)

Joker Machine Brand ~ Custom Triple Tree Steel Nut, Replaces OEM # 53220-286-000 High quality CNC machined part made in the U.S.A.

USD$ 33.25
Listed Models
Out of Stock
Email Me When Available
Honda CB360K Rear Fuel Tank Holder Rubber
USD$ 6.75
Listed Models

Rear Fuel Tank Holder Rubber

#12-0133 | Honda CB360K (1974)

Rear Fuel Tank Holder Rubber, Replaces OEM# 17613-286-000

USD$ 6.75
Listed Models
Honda CB360K Contact Point ~ Right Side
USD$ 5.55
Listed Models

Contact Point ~ Right Side

#14-0005 | Honda CB360K (1974)

Contact Point ~ Right Side - Replaces OEM# 30203-286-004 / 30203-369-154

USD$ 5.55
Listed Models
Honda CB360K Contact Point ~ Left Side
USD$ 5.55
Listed Models

Contact Point ~ Left Side

#14-0006 | Honda CB360K (1974)

Contact Point ~ Left Side - Replaces OEM# 30204-286-004 / 30202-369-154

USD$ 5.55
Listed Models
Honda CB360K Gas/Fuel Tank Cap Latch Assembly
USD$ 29.55
Listed Models

Gas/Fuel Tank Cap Latch Assembly

#20-0083 | Honda CB360K (1974)

Gas/Fuel Tank Cap Latch Assembly, Includes Chrome Latch, Return Spring, Latch Mounting Pin and C-Clip.

USD$ 29.55
Listed Models
Honda CB360K Starter Solenoid Relay
USD$ 22.15
Listed Models

Starter Solenoid Relay

#24-2003 | Honda CB360K (1974)

Starter Solenoid Relay OEM Ref # 35850-375-000 / 35850-286-027

USD$ 22.15
Listed Models
Honda CB360K Hot Shot Rectifier/Regulator ~ Lithium Ion Battery Compatible
USD$ 114.65
Listed Models

Hot Shot Rectifier/Regulator ~ Lithium Ion Battery Compatible

#24-2014 | Honda CB360K (1974)

Rick's Electric Brand Hot Shot Lithium Ion Battery Compatible Rectifier-Regulator. Designed with a lower voltage set point to work with lithium ion batteries only. This combination unit works with the stock stator to provide an upgraded charging system; it allows the stator to charge at full capacity 100% of the time! This is a direct plug-in combination rectifier-regulator that looks the same as the OE version & will mount in the same location as the OE rectifier for easy install. Dimensions 54mm Length, 57mm Width, 35mm Height. High quality Part. This is Not for use with standard lead acid batteries. The voltage set point is 14V +/- .2. Please ensure this set point is correct for your battery before attempting installation.

USD$ 114.65
Listed Models
Honda CB360K Rectifier
USD$ 14.00
Listed Models

Rectifier

#24-2078 | Honda CB360K (1974)

Rectifier with female connector, Replaces OEM# 31700-455-671 / 31700-358-305 / 31700-358-013

USD$ 14.00
Listed Models
Honda CB360K Hot Shot Rectifier / Regulator
USD$ 125.75
Listed Models

Hot Shot Rectifier / Regulator

#24-2089 | Honda CB360K (1974)

Rick's Electric Brand Hot Shot Rectifier / Regulator. Replaces OEM# 31400-292-670 / 31700-455-671 / 31700-292-008. This combination unit works with the stock stator to provide an upgraded charging system; it allows the stator to charge at full capacity 100% of the time! This is a direct plug-in combination rectifier-regulator that looks the same as the OE version & will mount in the same location as the OE rectifier for easy install. This unit is NOT compatible with lithium-ion batteries. If you have a Lithium Ion battery installed we sell a lithium ion version of this item.

USD$ 125.75
Listed Models
Honda CB360K Condenser
USD$ 13.30
Listed Models

Condenser

#26-5106 | Honda CB360K (1974)

Condenser - Replaces OEM# 30250-369-004 / 30280-292-672 / 30280-292-671 / 30280-371-000

USD$ 13.30
Listed Models
Honda CB360K Swing Arm Bushing Set
USD$ 51.75
Listed Models

Swing Arm Bushing Set

#28-1026 | Honda CB360K (1974)

Swing Arm Bushing Set OEM Ref # 52108-457-300 Note: These Replace the factory plastic OEM Type Bushings.

USD$ 51.75
Listed Models
Honda CB360K High Performance Kibblewhite Bronze Swingarm Bushing Set
USD$ 44.35
Listed Models
Out of Stock
Email Me When Available

High Performance Kibblewhite Bronze Swingarm Bushing Set

#28-1038 | Honda CB360K (1974)

High Performance Kibblewhite Bronze Swingarm Bushing Set/2. Replaces OEM# 52108-457-300, 52108-422-300. Made in the USA by Kibblewhite who have been making High Quality Performance parts for 75+ years. Kibblewhite bronze bushings offers increased durability and better fitment then the OEM type bushings.

USD$ 44.35
Listed Models
Out of Stock
Email Me When Available
Honda CB360K Steering Bearing Kit
USD$ 46.95
Listed Models
Out of Stock
Email Me When Available

Steering Bearing Kit

#28-2011 | Honda CB360K (1974-1976)

Tapered Roller Steering Bearing Conversion Kit. Superior to OEM quality, 10X the contact area and less flex. Designed as a drop in replacement for the original bearing. Kit is complete with upper and lower tapered bearing races. High quality made in Japan.

USD$ 46.95
Listed Models
Out of Stock
Email Me When Available
Honda CB360K Rear Shock Swingarm Bushing
USD$ 3.90
Listed Models

Rear Shock Swingarm Bushing

#28-6918 | Honda CB360K (1974)

Rear Shock Swingarm Bushing, Replaces OEM# 40548-268-000 19mm Long, 22mm OD, 10mm ID. Sold Each, Order the Quantity you Require

USD$ 3.90
Listed Models
Honda CB360K Master Cylinder Reservoir Cap
USD$ 29.55
Listed Models

Master Cylinder Reservoir Cap

#29-0054 | Honda CB360K (1974)

Master Cylinder Cap with Plastic O-Ring. Replaces OEM # 45513-341-771 This style of master cylinder cap was discontinued long ago by Honda. We have had these produced again to keep your bike looking sharp. Spruce up your Master Cylinder with one of these great looking master cylinder caps!

USD$ 29.55
Listed Models
Honda CB360K Front Brake Caliper Piston
USD$ 13.70
Listed Models

Front Brake Caliper Piston

#29-0058 | Honda CB360K (1974)

Front Brake Caliper Piston (1) - 38.15mm Diameter x 34mm Height - Replaces OEM # 45107-323-020. Please note: the side with the 2mm outer lip faces the brake pad during install.

USD$ 13.70
Listed Models
Honda CB360K Master Cylinder Reservoir Cap Plastic O-Ring
USD$ 2.90
Listed Models

Master Cylinder Reservoir Cap Plastic O-Ring

#29-0062 | Honda CB360K (1974)

Master Cylinder Reservoir Cap Plastic O-Ring, Replaces OEM # 45521-MJ6-006

USD$ 2.90
Listed Models
Honda CB360K Reservoir Cap & Diaphragm
USD$ 14.75
Listed Models

Reservoir Cap & Diaphragm

#29-0080 | Honda CB360K (1974)

Reservoir Cap & Diaphragm Round Thread On Type OEM Ref # 43515-MJ6-006 / 45520-300-000

USD$ 14.75
Listed Models
Honda CB360K Fuel Petcock
USD$ 22.15
Listed Models

Fuel Petcock

#29-0542 | Honda CB360K (1974)

Fuel Petcock - Replaces OEM # 16950-292-000 - Fits M16 x 1.5 Note: Please Check that the Size Listed Above is Correct for your Bike before ordering

USD$ 22.15
Listed Models
Honda CB360K Brake Rod Spring
USD$ 1.45
Listed Models

Brake Rod Spring

#29-7006 | Honda CB360K (1974)

Brake Rod Spring. Replaces OEM # 95014-73100

USD$ 1.45
Listed Models
Honda CB360K Brake Caliper Bleed Screw Rubber Cap (Stock Type)
USD$ 2.20
Listed Models

Brake Caliper Bleed Screw Rubber Cap (Stock Type)

#29-7018 | Honda CB360K (1974)

Stock Type Brake Caliper Bleed Screw Rubber Cap. These are the Same Design Rubber Caps as the Originals from the Factory. Replaces OEM # 45110-300-003 / 45224-579-013

USD$ 2.20
Listed Models
Honda CB360K Flange Knock Bolt (Set/2)
USD$ 2.20
Listed Models

Flange Knock Bolt (Set/2)

#29-7019 | Honda CB360K (1974)

Flange Knock Bolt (Set/2). These Bolts Fasten to the Cam Sprocket. Replaces OEM # 90082-HA0-000

USD$ 2.20
Listed Models
Honda CB360K Special Oil Filter Rotor Washer
USD$ 5.95
Listed Models

Special Oil Filter Rotor Washer

#29-7034A | Honda CB360K (1974)

Special Angled Oil Filter Rotor Washer (16mm), Replaces OEM# 90481-292-000

USD$ 5.95
Listed Models
Honda CB360K Master Cylinder Rubber Boot
USD$ 7.35
Listed Models

Master Cylinder Rubber Boot

#33-0003 | Honda CB360K (1974)

Master Cylinder Rubber Boot. This Boot Attaches to where the Brake Hose Joins to the Master Cylinder. Replaces OEM # 45522-300-010

USD$ 7.35
Listed Models
Honda CB360K Clutch Center Nut Removal Tool
USD$ 8.85
Listed Models

Clutch Center Nut Removal Tool

#35-0051 | Honda CB360K (1974)

Clutch Center Nut Removal Tool, The perfect tool for easier removal/fitting, without damaging the special locking nut. Inside diameter 24mm, use with 3/8" driver.

USD$ 8.85
Listed Models
Honda CB360K Clutch Center Nut Removal Tool ~ Premium
USD$ 12.55
Listed Models

Clutch Center Nut Removal Tool ~ Premium

#35-0076 | Honda CB360K (1974)

Premium Clutch Center Nut Removal Tool, The perfect tool for easier removal/fitting, without damaging the special locking nut. Both ends with 1/2 drive extension bar, Diameter 20 x 24.

USD$ 12.55
Listed Models
Honda CB360K Steel Clutch Plate
USD$ 8.10
Listed Models

Steel Clutch Plate

#39-1140 | Honda CB360K (1974)

Steel Clutch Plate B OEM Ref # 22321-KA4-700 Order the Quantity you require

USD$ 8.10
Listed Models
Honda CB360K Steel Clutch Plate "A"
USD$ 5.90
Listed Models

Steel Clutch Plate "A"

#39-1410 | Honda CB360K (1974)

Steel Clutch Plate "A", Replaces OEM# 22311-286-000. 1 Plate Used Per Bike

USD$ 5.90
Listed Models
Honda CB360K Carb Rebuild Kit
USD$ 11.05
Listed Models

Carb Rebuild Kit

#48-1394 | Honda CB360K (1974)

Carb Rebuild Kit. Note: Each Kit Rebuilds One Carb, Order the Quantity of Kits you Require

USD$ 11.05
Listed Models
Honda CB360K Carb Holder Set
USD$ 36.95
Listed Models

Carb Holder Set

#48-1459 | Honda CB360K (1974)

Carb Holder Set (Set of 2 with Gaskets). Replace those old cracked or dried up carb holders with a brand new set! Replaces OEM #'s 16211-369-000 X2 and 16229-369-000 X2 NOTE-If you require band clamps, these carb holders require our 46-49mm diameter clamps part #15-0685 X2.

USD$ 36.95
Listed Models
Honda CB360K Carb Intake Manifold
USD$ 17.70
Listed Models

Carb Intake Manifold

#48-1472 | Honda CB360K (1974)

Carb Intake Manifold - Replaces OEM# 16211-369-000 NOTE: This is for One Holder, Order the Quantity you Require. If you require band clamps, these carb holders require our clamps part #15-0685

USD$ 17.70
Listed Models
Honda CB360K Carb Slide Diaphragm Rubber Set
USD$ 29.55
Listed Models

Carb Slide Diaphragm Rubber Set

#48-1500 | Honda CB360K (1974)

Carb Slide Diaphragm Rubbers Set - Includes 2 Diaphragms (Rubber Portion Only as Shown) and 2 O-Rings. Replaces Rubber Portion on OEM# 16022-369-004

USD$ 29.55
Listed Models
The names Honda, Yamaha, Kawasaki, Suzuki and any other trade names or symbols belonging to each respective corporation are stated for reference purposes only. The products on this site are after market (not OEM) replacement parts and accessories only. We have no relationship to the listed companies.