Honda ► CB400F ►
-
Here’s our hand-picked list of parts and accessories for your Honda CB400F►
- Honda

Gas/Fuel Cap Latch Lock Assembly
Chrome Gas/Fuel Cap Latch Lock Assembly with 2 Keys, Replaces OEM # 17550-377-315

Gas/Fuel Tank Cap Latch Assembly ~ Black
Gas/Fuel Tank Cap Latch Assembly, Includes Black Latch with Return Spring, Latch Mounting Pin and C-Clip.

Tappet Covers
Finned Tappet Cover - Sold Each Comes With O-Ring gasket High Quality Chrome Finish

Honda OEM Type Grips
Honda OEM Type Rubber Grip Set - Black - Closed end type for 7/8" bars. These are replica's of the original type grips from the factory. 130mm Length. Replaces OEM #' 95011-14100 / 95011-14200

Throttle Sleeve
Nylon Throttle Sleeve - Replaces OEM # 53141-300-010

Side Stand Rubber
Side Stand Rubber Cushion. Replaces OEM # 50548-356-700

Chrome Stock Type Front Fender
Chrome Stock Type Front Fender, Replaces OEM # 61100-333-000XW / 61100-377-000 Includes the chrome support struts, bracket for the speedo cable and the bracket to hold the brake hose in place. It does not come with hardware to secure the fender to the forks.

Kick Stand Stopper Rubber
Kick Stand Stopper Rubber "A" - Replaces OEM# 95011-61000.

Cam Chain Tensioner Slipper
Cam Chain Tensioner Slipper - Replaces OEM# 14545-333-000

Matte Black ~ OEM Type Gas/Fuel Tank Cap With Latch Assembly
Matte Black OEM Type Gas/Fuel Tank Cap with Gasket, Hinge Pin (with E-Clip which Allows for easy installation) and Gas/Fuel Tank Cap Latch Assembly, Includes Latch, Return Spring, Latch Mounting Pin and C-Clip. Replaces OEM # 17510-323-310

Front Brake Pipe
Front Brake Pipe - Replaces OEM# 45128-317-701 Aprox 8" Total Length.

Dynatek Dyna S Ignition System (Ultimate Kit)
Dynatek Dyna S Ignition System (Ultimate Kit) with Dynatek Brand 5 Ohm Dual Output Coils and Dynatek Brand High Performance Spark Plug Wires. The Dyna S is a complete self-contained electronic ignition system built with the latest state-of-the-art engineering. This is the same ignition used by top racers over the past 2 decades. The Dyna S is completely housed behind the ignition cover and uses a magnetic rotor with the original spark advancer, so the factory advance curve is maintained. Increases power and reduces vibration, backfiring and intake reversion, especially on engines with radical cam timing. Front and rear cylinder timing may be set individually. Perfect for hot dual-plugged engines. The Dyna S ignition is a time proven solution to the basic ignition and trigger needs of the modern motorcycle. The Dyna S is the standard of performance and reliability. Very high quality made in the USA. Includes instructions and comes with a one year warranty through Dynatek.

Dynatek Dyna S Ignition System
Dynatek Dyna S Ignition System. The Dyna S is a complete self-contained electronic ignition system built with the latest state-of-the-art engineering. This is the same ignition used by top racers over the past 2 decades. The Dyna S is completely housed behind the ignition cover and uses a magnetic rotor with the original spark advancer, so the factory advance curve is maintained. Increases power and reduces vibration, backfiring and intake reversion, especially on engines with radical cam timing. Front and rear cylinder timing may be set individually. Perfect for hot dual-plugged engines. The Dyna S ignition is a time proven solution to the basic ignition and trigger needs of the modern motorcycle. The Dyna S is the standard of performance and reliability. Very high quality made in the USA. This ignition can be used with coils 3 ohms or higher. Includes instructions and comes with a one year warranty through Dynatek.

Passenger Rear Footrest Set
Passenger Rear Footrest Set/2, Replaces OEM # 50716-371-660 (Rubbers) and OEM # 50715-MA6-000 (Metal Pegs).

Clutch Lever
Clutch Lever OEM Ref # 53178-369-700 / 53190-329-010 / 53190-286-670

Brake Lever
Brake Lever OEM Ref # 53175-369-003 / 53175-300-020 / 53170-333-000

Clutch Lever ~ GP Style
Clutch Lever - Custom GP Style in Silver, This Has More of a Bend/Kickback then the stock lever. Replaces OEM # 53178-369-700

Brake Lever
Brake Lever OEM Ref # 53175-KM9-006 / 53175-ML5-006 / 53175-MR1-671

Rear Master Cylinder Reservoir Diaphragm
Rear Master Cylinder Reservoir Diaphragm Replaces OEM # 45520-MG7-006

Front Brake Master Cylinder Repair Kit
Front Brake Master Cylinder Repair Kit OEM Ref # 45530-377-305

Front Master Cylinder Reservoir Diaphragm
Front Master Cylinder Reservoir Diaphragm. Replaces OEM # 45520-300-000

Front Master Cylinder Reservoir Diaphragm
Front Master Cylinder Reservoir Diaphragm. Replaces OEM # 45520-MA5-671 / 45520-MA5-672 / 45520-H5M-630

Brake Lever ~ GP Style
Brake Lever - Custom GP Style in Silver, This Has More of a Bend/Kickback then the stock lever. Replaces OEM # 53175-369-003

Rear Master Cylinder Repair Kit
Rear Master Cylinder Repair Kit, Replaces OEM# 43520-MB2-305 Does not include Piston.

Fuse Box Assembly
Fuse Box Assembly Complete with 5 Fuses and Fuse Box Cover, Replaces OEM # 38200-377-305

Turn Signal Lamp Gasket
Turn Signal Lamp Gasket, Replaces OEM # 33406-377-671

Rear Signal Stem
Rear Signal Stem OEM Ref # 33691-MJ0-003

Turn Signal Replacement Lens
Turn Signal Replacement Lens (Amber) - Front or Rear OEM Ref # 33402-268-671

Turn Signal Replacement Lens
Turn Signal Replacement Lens - Amber - Front o& Rear OEM Ref # 33406-MB2-601 / 33406-MB2-671

Turn Signal Lamp
Turn Signal Lamp - Front 2-Wire OEM Ref # 33400-377-671 / 33400-460-671 / 33400-460-679

Turn Signal Lamp
Turn Signal Lamp - Front or Rear 2 Wire - 12 Volt Stem *Our Part Number 11-2167*

Signal Lamp Lens w Gasket & Screws - Red
Red Front/Rear Turn Signal Lamp Lens with Gasket and 2 Screws. OEM Ref # 33402-268-671

Turn Signal Lamp
Turn Signal Lamp - Glossy Black 3 Wire - Dual Filament Left Front / Right Rear * For Single Filament, Use 2 of 3 Wire *

Turn Signal Lamp
Turn Signal Lamp - Glossy Black 3 Wire - Dual Filament Right Front / Left Rear * For Single Filament, Use 2 of 3 Wire *

Stock Type Reflector
Stock Type Screw on Reflector, 6mm thread. Replaces OEM # 33741-340-670

Stop Light Switch
Rear Stop Light Switch OEM Ref # 35350-292-003 / 35350-KJ9-405

Front Stop Switch
Front Stop Switch & Safety Starter Switch OEM Ref # 35340-329-003 / 35340-102-003 / 35340-401-682 / 35340-329-000 / 35340-086-721

Ignition Switch Assembly
Ignition Switch Assembly Fork Lock & Keys 5 Prong Socket Connector OEM Ref # 35100-377-003 / 35100-377-007 / 35100-422-017

Ignition Switch Base Cover
Ignition Switch Base Cover OEM Ref # 35102-431-007

Custom Triple Tree Steel Nut ~ Joker Machine
Joker Machine Brand ~ Custom Triple Tree Steel Nut, Replaces OEM # 53220-286-000 High quality CNC machined part made in the U.S.A.

High Performance Kibblewhite Valve Stem Seal Set
High Performance Kibblewhite 100% Viton Valve Stem Seal Set of 8. Replaces OEM# 12209-333-005. Made in the USA by Kibblewhite who have been making High Quality Performance parts for 75+ years. Kibblewhite Red 100% Viton valve stem seals are designed to have optimum fitment, allow, maximum lift, and to give maximum life. Kibblewhite Red valve stem seals are resistant to high temperatures, petroleum products and the corrosive gasses that are the by-products of combustion. These viton seals retain their ability to seal in situations where other materials could harden and allow oil to enter the combustion chamber causing detonation, carbon build up and a loss of power. The Red Ones are truly the racers choice.

High Performance Kibblewhite Valve Spring Set
High Performance Kibblewhite Valve Spring Set of 8. Made in the USA by Kibblewhite who have been making High Quality Performance parts for 75+ years. The springs in these kits are wound from super clean chrome silicon wire that has been heat treated and shot peened. These components offer optimal fitment, keeping lateral movement to a minimum. They work together as a system, providing long life, and maximum performance.

Oil Filter
Oil Filter OEM Ref # 15410-426-010 / 15410-422-004 / 16099-003 / 36Y-13441-00 Note: If you require new oil filter o-rings, springs or washers we sell these on our site as well

Oil Filter
Oil Filter Spin On Type OEM Ref # 15410-MM9-003 / 15410-MM5-003 / 15410-MT7-003 / 3FV-13440-00 / 16097-1061 / 16097-1063 / 16097-1059