Honda ► CB550F ►
-
Here’s our hand-picked list of parts and accessories for your Honda CB550F►
- Honda

Cylinder Head Nut Cover
Cylinder Head Nut Cover OEM Ref # 91318-300-013

Tappet Covers
Finned Tappet Cover - Sold Each Comes With O-Ring gasket High Quality Chrome Finish

Tail Light Bracket
Chrome Tail Light Bracket, Replaces OEM # 84701-341-670 / 84701-371-980

Honda OEM Type Grips
Honda OEM Type Rubber Grip Set - Black - Closed end type for 7/8" bars. These are replica's of the original type grips from the factory. 130mm Length.

Honda OEM Type Grips
Honda OEM Type Rubber Grip Set - Black - Closed end type for 7/8" bars. These are replica's of the original type grips from the factory. 135mm Length. Replaces OEM #' 53165-342-670 / 53166-342-670

Throttle Sleeve
Nylon Throttle Sleeve - Replaces OEM # 53141-300-010

Chrome Speedometer & Tachometer Cover Set
Set of Chrome Plated Speedometer & Tachometer Covers. These go over the stock speedo and tach gauges to give them a great chrome look! Diameter at Base of Cover - 103mm Diameter at Top of Covers - 87mm Height of Covers - 37mm Includes a small hole in one of the covers for the tripmeter. Note: Speedo/Tach Not Included, Shown in Photo to illustrate how they look when installed.

Honda OEM Type Grips ~ Open End
Honda OEM Type Rubber Grips - Black - Open End Type with End Plugs Included - For 7/8" bars. These are replica's of the original type grips from the factory. 130mm Length. Replaces OEM #' 53165-390-780 / 53166-390-780

Sidecover Damper Rubber B
Rubber Sidecover Damper B, Replaces OEM # 83551-300-000

Sidecover Damper Rubber A
Rubber Sidecover Damper A, Replaces OEM # 17247-303-000

Front Fuel Tank Holder Rubber
Front Fuel Tank Holder Rubber - Replaces OEM # 17611-283-010 Sold Each.

Side Stand Rubber
Side Stand Rubber Cushion. Replaces OEM # 50548-356-700

Stock Style Speedometer - MPH
Stock Style Speedometer MPH with back illumination, Face dial ranges from 0-120MPH. The ratio of this Speedometer is 60MPH=2240 RPM which is the ratio used on all stock type CB's. Note: The Speedometers slightly changed from year to year, this may not be an exact stock match for your bike but will work great! Housing Size approx 4.6", face 3.9" Check the photo for the design.

Stock Style Speedometer - KPH
Stock Style Speedometer KPH with back illumination, Face dial ranges from 0-240KPH. The ratio of this Speedometer is 100KPH=2330 RPM which is the ratio used on all stock type CB's. Note: The Speedometers slightly changed from year to year, this may not be an exact stock match for your bike but will work great! Housing Size approx 4.6", face 3.9" Check the photo for the design.

Piston Pin Clips
Piston Pin Clips, 15mm (Pk/2) - Japanese made Superior Quality OEM Ref. # 94601-15000

Shock Absorber Set ~ Stock Design
Stock Type Designed Shock Absorber Set - Chrome Body and Cover with Chrome Springs. These are modelled after the original stock shocks. Replaces OEM# 52400-455-670XW / 52400-390-681XW / 52400-292-670XW / 52400-323-010XW
The original OEM shocks came with 3 position spring preload adjustments however we have upgraded these to 5 spring preload adjustments so you can better fine tune these shocks! 321mm (12.6") Center of Eye to Clevis.

Ignition Coil Bracket Set
Ignition Coil Bracket Set. Replaces OEM# 30511-300-000 Features a high grade polished finish and includes coil mounting hardware.

Kick Stand Stopper Rubber
Kick Stand Stopper Rubber "A" - Replaces OEM# 95011-61000.

Cam Chain Tensioner Slipper
Cam Chain Tensioner Slipper - Replaces OEM# 14520-323-000

Front Brake Pipe
Front Brake Pipe - Replaces OEM# 45128-323-020 Aprox 8" Total Length.

Dynatek Dyna S Ignition System
Dynatek Dyna S Ignition System. The Dyna S is a complete self-contained electronic ignition system built with the latest state-of-the-art engineering. This is the same ignition used by top racers over the past 2 decades. The Dyna S is completely housed behind the ignition cover and uses a magnetic rotor with the original spark advancer, so the factory advance curve is maintained. Increases power and reduces vibration, backfiring and intake reversion, especially on engines with radical cam timing. Front and rear cylinder timing may be set individually. Perfect for hot dual-plugged engines. The Dyna S ignition is a time proven solution to the basic ignition and trigger needs of the modern motorcycle. The Dyna S is the standard of performance and reliability. Very high quality made in the USA. This ignition can be used with your stock coils or any other coils 3 ohms or higher. Includes instructions and comes with a one year warranty through Dynatek.

Passenger Rear Footrest Set
Passenger Rear Footrest Set/2, Replaces OEM # 50716-371-660 (Rubbers) and OEM # 50715-MA6-000 (Metal Pegs).

Clutch Lever
Clutch Lever OEM Ref # 53178-369-700 / 53190-329-010 / 53190-286-670

Brake Lever
Brake Lever OEM Ref # 53175-369-003 / 53175-300-020 / 53170-333-000

Clutch Lever ~ GP Style
Clutch Lever - Custom GP Style in Silver, This Has More of a Bend/Kickback then the stock lever. Replaces OEM # 53178-369-700

Front Brake Master Cylinder Repair Kit
Front Brake Master Cylinder Repair Kit OEM Ref # 45530-377-305

Front Brake Master Cylinder Rebuild Kit
Front Brake Master Cylinder Rebuild Kit - OEM Ref # 45530-404-315 Made in Japan

Front Master Cylinder Reservoir Diaphragm
Front Master Cylinder Reservoir Diaphragm. Replaces OEM # 45520-300-000

Brake Lever ~ GP Style
Brake Lever - Custom GP Style in Silver, This Has More of a Bend/Kickback then the stock lever. Replaces OEM # 53175-369-003

Headlamp Rim & Retainer
Headlamp Rim & Retainer Assembly - OEM Ref. # 33101-404-671

Headlamp Rim
Headlamp Rim - Chrome - Replaces OEM # 33101-300-673 / 33101-405-671

Fuse Box Assembly
Fuse Box Assembly Complete with 5 Fuses and Fuse Box Cover, Replaces OEM # 38200-377-305

Turn Signal Lamp Gasket
Turn Signal Lamp Gasket, Replaces OEM # 33406-377-671

Turn Signal Lamp
Turn Signal Lamp - Front 2-Wire OEM Ref # 33400-377-671 / 33400-460-671 / 33400-460-679

Turn Signal Lamp
Turn Signal Lamp 1-Wire - Rear OEM Ref # 33400-377-671 / 33400-460-671 / 33400-460-679

Turn Signal Replacement Lens
Turn Signal Replacement Lens - Amber - Front or Rear OEM Ref # 4H7-83312-00

Stock Type Reflector
Stock Type Screw on Reflector, 6mm thread. Replaces OEM # 33741-340-670

Stop Light Switch
Rear Stop Light Switch OEM Ref # 35350-292-003 / 35350-KJ9-405

Front Stop Switch
Front Stop Switch & Safety Starter Switch OEM Ref # 35340-329-003 / 35340-102-003 / 35340-401-682 / 35340-329-000 / 35340-086-721

Ignition Switch Assembly
Ignition Switch Assembly Fork Lock & Keys 5 Prong Socket Connector OEM Ref # 35100-377-003 / 35100-377-007 / 35100-422-017

Ignition Switch Base Cover
Ignition Switch Base Cover OEM Ref # 35102-431-007

Custom Triple Tree Steel Nut ~ Joker Machine
Joker Machine Brand ~ Custom Triple Tree Steel Nut, Replaces OEM # 53220-286-000 High quality CNC machined part made in the U.S.A.

Custom Fork Boot Collars ~ Joker Machine
Joker Machine Brand ~ Custom Fully CNC Machined Fork Boot Collar Set/2. A great solution for giving your stock bike (with the sheet metal headlight ears), an open fork tube Cafe look, while giving you an upper attachment point in order to retain your stock accordion style O.E.M. fork Gaitors. Designed to fit easily onto 35MM fork tubes and may be adjusted up-or-down along the tube into position, then tightened into place with the recessed set screw located in the groove (totally invisible).

High Performance Kibblewhite Valve Spring Set
High Performance Kibblewhite Valve Spring Set of 8. Made in the USA by Kibblewhite who have been making High Quality Performance parts for 75+ years. The springs in these kits are wound from super clean chrome silicon wire that has been heat treated and shot peened. These components offer optimal fitment, keeping lateral movement to a minimum. They work together as a system, providing long life, and maximum performance.

High Performance Kibblewhite Black Diamond Intake Valve
High Performance Kibblewhite Black Diamond Intake Valve. Replaces OEM# 14711-107-020. Made in the USA by Kibblewhite who have been making High Quality Performance parts for 75+ years. All Black Diamond Stainless steel valves are impregnated by a special German process to a depth of .002, with a surface build up of .0002. This Black Diamond process improves wear properties, reduces friction, and provides resistance to corrosion and wear that is superior to chrome and nickel electrolysis plating. Each valve is designed using Finite Element Analysis software, and profiles are tested on our computerized flow bench. Black Diamond Valves are lightweight, strong, one piece forgings with profiles that provide excellent flow characteristics. Sold Each, Order the Quantity you Require