HondaCB650 ► 

Refine Search Results
Honda CB650 Speedometer Cable
USD$ 19.20
Listed Models

Speedometer Cable

#73-0198 | Honda CB650 (1980-1982)

Speedometer Cable - OEM Ref # 44830-KC1-010 Made in Japan

USD$ 19.20
Listed Models
Honda CB650 Choke Cable
USD$ 14.75
Listed Models

Choke Cable

#73-0203 | Honda CB650 (1979-1980)

Choke Cable - OEM # 17950-426-000 Made in Japan

USD$ 14.75
Listed Models
Honda CB650 Starter Solenoid Relay
USD$ 23.65
Listed Models

Starter Solenoid Relay

#73-0824 | Honda CB650 (1979-1982)

Starter Solenoid Relay with Fuse. Replaces OEM # 35850-MB0-007

USD$ 23.65
Listed Models
Honda CB650 Oil Pressure Switch
USD$ 15.50
Listed Models

Oil Pressure Switch

#73-0825 | Honda CB650 (1979-1982)

Oil Pressure Switch, Replaces OEM # 37240-P13-013

USD$ 15.50
Listed Models
Honda CB650 Carb Fuel Connector Tube and Accellerator Tube O-Rings
USD$ 9.60
Listed Models

Carb Fuel Connector Tube and Accellerator Tube O-Rings

#73-0831 | Honda CB650 (1981-1982)

Carburetor Fuel Connector Tube and Accellerator Tube O-Rings, 12 O-Rings.

USD$ 9.60
Listed Models
Honda CB650 Front Brake Caliper Shaft Boots Pk/4
USD$ 12.55
Listed Models

Front Brake Caliper Shaft Boots Pk/4

#73-0835 | Honda CB650 (1979)

Front Brake Caliper Shaft Boots Pk/4, These are the Rubber Covers that Attach to the Front Brake Caliper. Replaces OEM # 45133-413-003

USD$ 12.55
Listed Models
Honda CB650 Stock Type Gearshift Lever Rubber
USD$ 4.80
Listed Models

Stock Type Gearshift Lever Rubber

#73-0838 | Honda CB650 (1979-1982)

Stock Type Gearshift Lever Rubber, Replaces OEM # 24781-419-000

USD$ 4.80
Listed Models
Honda CB650 Brake Rod Joint
USD$ 2.20
Listed Models

Brake Rod Joint

#73-0843 | Honda CB650 (1979-1982)

Brake Rod/Arm Joint, Replaces OEM # 95015-32001

USD$ 2.20
Listed Models
Honda CB650 Brake Rod Joint Pin w Cotter Pin
USD$ 3.65
Listed Models

Brake Rod Joint Pin w Cotter Pin

#73-0844 | Honda CB650 (1979-1982)

Brake Rod Joint Pin with Cotter Pin, Replaces OEM # 95015-52000 (Joint Pin) and OEM # 94201-16250 (Cotter Pin).

USD$ 3.65
Listed Models
Honda CB650 Brake Rod Adjusting Nut
USD$ 2.90
Listed Models

Brake Rod Adjusting Nut

#73-0845 | Honda CB650 (1979-1982)

Brake Rod Adjusting Nut, Replaces OEM # 95015-42000

USD$ 2.90
Listed Models
Honda CB650 Valve Stem Seal
USD$ 2.80
Listed Models

Valve Stem Seal

#73-0871 | Honda CB650 (1979-1982)

Valve Stem Seal. Replaces OEM # 12209-333-005 / 12209-333-005 Sold Each - Order the Quantity you Require

USD$ 2.80
Listed Models
Honda CB650 Tach Drive Plug Block Off w O-Ring
USD$ 14.75
Listed Models

Tach Drive Plug Block Off w O-Ring

#73-0884 | Honda CB650 (1979-1982)

Tach Drive Plug (Block Off) with O-ring. This plug is generally used when the tachometer cable drive is removed and still needs to be blocked off to prevent oil leakage. This plug has an o-ring groove machined in it for better sealing. Several bike builders just cut the stock cable off and left the Honda cable drive end installed in the valve cover. This plug is a much cleaner option in both functionality and looks. These plugs are a real nice touch when you are not using the stock tachometer, and need to eliminate the cable, or are using an electronic tach. Installs in about a minute, no need to remove the valve cover to remove the tach drive gear assy. Fits tachometer cables that are approximately 15mm in diameter with a 10.5mm groove and held in place with a screw.

USD$ 14.75
Listed Models
Honda CB650 Center Stand Spring Plate
USD$ 2.90
Listed Models

Center Stand Spring Plate

#73-0891 | Honda CB650 (1979-1982)

Center Stand Spring Plate, This is the Plate the Center Stand Spring Attaches to. Replaces OEM # 50523-425-000

USD$ 2.90
Listed Models
Honda CB650 Rear Brake Shoe Spring Set/2
USD$ 4.40
Listed Models

Rear Brake Shoe Spring Set/2

#73-0895 | Honda CB650 (1979-1982)

Rear Brake Shoe Spring Set of 2. Replaces OEM # 43151-346-000

USD$ 4.40
Listed Models
Honda CB650 Fuse Box Plate Cover Screw Set
USD$ 1.45
Listed Models

Fuse Box Plate Cover Screw Set

#73-0897 | Honda CB650 (1979-1982)

Black Fuse Box Plate Cover Screw (Set of 2). Replaces OEM # 93700-05020-0G

USD$ 1.45
Listed Models
Honda CB650 Footrest Rubbers
USD$ 17.00
Listed Models

Footrest Rubbers

#73-0912 | Honda CB650 (1979-1982)

Footrest Rubbers (Set/2) - OEM Ref # 50661-425-670

USD$ 17.00
Listed Models
Honda CB650 Wire Harness
USD$ 88.75
Listed Models

Wire Harness

#73-0930 | Honda CB650 (1980-1982)

Main Wire Harness Loom - OEM Ref # 32100-460-000 NOTE: These fit model years and type listed, other years and bikes use a different OEM part number (there is a difference!).

USD$ 88.75
Listed Models
Honda CB650 Brake Disc Retaining Nut Pk/10
USD$ 4.40
Listed Models

Brake Disc Retaining Nut Pk/10

#73-0937 | Honda CB650 (1979)

Brake Disc Retaining Nut Pk/10, Replaces OEM # 90309-357-000

USD$ 4.40
Listed Models
Honda CB650 Brake Cam Dust Seal
USD$ 2.20
Listed Models

Brake Cam Dust Seal

#73-0938 | Honda CB650 (1979-1982)

Brake Cam Dust Seal, Replaces OEM # 43134-300-000

USD$ 2.20
Listed Models
Honda CB650 Fork Seal Stopper Metal Ring Pk/2
USD$ 5.15
Listed Models

Fork Seal Stopper Metal Ring Pk/2

#73-0940 | Honda CB650 (1979-1980)

Fork Seal Stopper Metal Ring Pk/2, Replaces OEM # 51447-KL4-951 This is the Metal Ring above the Fork Seal.

USD$ 5.15
Listed Models
Honda CB650 Carb Top Gasket
USD$ 6.60
Listed Models

Carb Top Gasket

#73-0954 | Honda CB650 (1979-1980)

Carburetor Top Gasket, Replaces OEM # 16014-393-004

USD$ 6.60
Listed Models
Honda CB650 Carb Rebuild Kit
USD$ 25.85
Listed Models

Carb Rebuild Kit

#73-0955 | Honda CB650 (1979)

Carb Rebuild Kit. Contains: Float Bowl Gasket, Carb Top Gasket, Float Needle, Slide Needle and Needle Jet, Main Jet #95, Air Screw with Spring and Misc. Packing Shown.

USD$ 25.85
Listed Models
Honda CB650 Crank Seal
USD$ 4.40
Listed Models

Crank Seal

#73-0960 | Honda CB650 (1979-1982)

Crank Seal - 30 x 42 x 8 - Replaces OEM # 91201-300-003 Note: Please Reference the OEM Number and Seal size above to make sure this is the Crank Seal you Require. Some models use 2 Different Crank Seals.

USD$ 4.40
Listed Models
Honda CB650 Tach Drive Oil Seal
USD$ 2.90
Listed Models

Tach Drive Oil Seal

#73-0964 | Honda CB650 (1979-1982)

Tach Drive Oil Seal - 4.8 x 14.5 x 5 - Replaces OEM # 91256-425-003

USD$ 2.90
Listed Models
Honda CB650 Shift Shaft Oil Seal
USD$ 2.90
Listed Models
Out of Stock
Email Me When Available

Shift Shaft Oil Seal

#73-0968 | Honda CB650 (1979-1982)

Shift Shaft Oil Seal - 12.5 x 25 x 8 - Replaces OEM # 91204-425-003

USD$ 2.90
Listed Models
Out of Stock
Email Me When Available
Honda CB650 Intake Valve
USD$ 11.05
Listed Models

Intake Valve

#73-0979 | Honda CB650 (1979-1982)

Intake Valve - Replaces OEM # 14711-426-003 Made in Japan

USD$ 11.05
Listed Models
Honda CB650 Exhaust Valve
USD$ 16.25
Listed Models

Exhaust Valve

#73-0980 | Honda CB650 (1979-1982)

Exhaust Valve - Replaces OEM # 14721-426-003 Made in Japan

USD$ 16.25
Listed Models
Honda CB650 Front Brake Caliper Bleed Screw
USD$ 5.90
Listed Models

Front Brake Caliper Bleed Screw

#73-0995 | Honda CB650 (1979-1981)

Front Brake Caliper Bleed Screw. Replaces OEM # 45224-413-003 Sold Each, Order the Quantity you Require

USD$ 5.90
Listed Models
Honda CB650 Handlebar Clutch Lever Pivot Bolt & Nut Set
USD$ 4.40
Listed Models

Handlebar Clutch Lever Pivot Bolt & Nut Set

#73-0998 | Honda CB650 (1979-1982)

Handlebar Clutch Lever Pivot Bolt & Nut Set. This is the Set that Fastens the Clutch Lever in Place. Includes One Bolt with One Nut. Replaces OEM # 90113-422-000 (Bolt) and OEM # 94002-06000-0S (Nut).

USD$ 4.40
Listed Models
Honda CB650 Press In Type Pilot Jet Set ~ Size #35 (Pk/4)
USD$ 9.60
Listed Models

Press In Type Pilot Jet Set ~ Size #35 (Pk/4)

#73-1001 | Honda CB650 (1981)

Press In Type Pilot Jet Set of 4 (Size #35) Pilot Jets (your idle and low speed operation) are critical for smooth idling and lower rpm driving. When rebuilding carbs it is highly recommended to replace these pilot jets to ensure your bike is running as well as possible. Also, when installing new exhaust or high flow air filters it is recommended to increase the size of your Pilot Jets. These are size #35 which is the stock size for these bikes, please confirm this is the size you require before purchasing. If you require oversize pilot jets we carry those as well.

USD$ 9.60
Listed Models
Honda CB650 Press In Type Pilot Jet Set ~ Size #38 (Pk/4)
USD$ 9.60
Listed Models

Press In Type Pilot Jet Set ~ Size #38 (Pk/4)

#73-1002 | Honda CB650 (1981)

Press In Type Pilot Jet Set of 4 (Size #38) Pilot Jets (your idle and low speed operation) are critical for smooth idling and lower rpm driving. When rebuilding carbs it is highly recommended to replace these pilot jets to ensure your bike is running as well as possible. Also, when installing new exhaust or high flow air filters it is recommended to increase the size of your Pilot Jets. These are size #38 which is oversize for these bikes, please confirm this is the size you require before purchasing.

USD$ 9.60
Listed Models
Honda CB650 Press In Type Pilot Jet Set ~ Size #42 (Pk/4)
USD$ 9.60
Listed Models

Press In Type Pilot Jet Set ~ Size #42 (Pk/4)

#73-1003 | Honda CB650 (1981)

Press In Type Pilot Jet Set of 4 (Size #42) Pilot Jets (your idle and low speed operation) are critical for smooth idling and lower rpm driving. When rebuilding carbs it is highly recommended to replace these pilot jets to ensure your bike is running as well as possible. Also, when installing new exhaust or high flow air filters it is recommended to increase the size of your Pilot Jets. These are size #42 which is the oversize for these bikes, please confirm this is the size you require before purchasing.

USD$ 9.60
Listed Models
Honda CB650 Pilot Jet Set ~ Size #35 (Pk/4)
USD$ 10.30
Listed Models

Pilot Jet Set ~ Size #35 (Pk/4)

#73-1004 | Honda CB650 (1982)

Pilot Jet Set of 4 (Size #35), Replaces OEM # 99103-GY6-0350 Pilot Jets (your idle and low speed operation) are critical for smooth idling and lower rpm driving. When rebuilding carbs it is highly recommended to replace these pilot jets to ensure your bike is running as well as possible.

USD$ 10.30
Listed Models
Honda CB650 Piston Ring Set (Standard Size)
USD$ 24.40
Listed Models

Piston Ring Set (Standard Size)

#73-1024 | Honda CB650 (1979-1982)

Standard Size Piston Ring Set Ring Set OEM Ref # 13011-426-004 (Std.) Japanese made Superior Quality Note: This Set includes piston rings to rebuild one piston, 4 Sets are needed to rebuild all pistons.

USD$ 24.40
Listed Models
Honda CB650 Swingarm Dust Seal Cap (Set/2)
USD$ 11.05
Listed Models

Swingarm Dust Seal Cap (Set/2)

#73-1028 | Honda CB650 (1979)

Swingarm Dust Seal Cap (Set/2). These Caps go on the Ends of the Swingarm Pivot. Replaces OEM # 52144-362-000 X2.

USD$ 11.05
Listed Models
Honda CB650 Handlebar Brake Lever Pivot Bolt Set
USD$ 5.15
Listed Models

Handlebar Brake Lever Pivot Bolt Set

#73-1030 | Honda CB650 (1979-1980)

Handlebar Brake Lever Pivot Bolt, Washer & Nut Set. This is the Set that Fastens the Brake Lever in Place. Includes One Bolt with One Washer and Nut. Replaces OEM # 90114-422-000 (Bolt).

USD$ 5.15
Listed Models
Honda CB650 Handlebar Brake Lever Pivot Bolt & Nut Set
USD$ 6.60
Listed Models

Handlebar Brake Lever Pivot Bolt & Nut Set

#73-1031 | Honda CB650 (1981-1982)

Handlebar Brake Lever Pivot Bolt & Nut Set. This is the Set that Fastens the Brake Lever in Place. Includes One Bolt with One Nut. Replaces OEM # 90114-MA5-671 (Bolt) and OEM # 94050-06000 (Nut)

USD$ 6.60
Listed Models
Honda CB650 Turn Signal Lamp Lens Screw Set
USD$ 1.85
Listed Models

Turn Signal Lamp Lens Screw Set

#73-1034 | Honda CB650 (1980-1982)

Turn Signal Lamp Lens Screw Set/2, Replaces OEM # 93500-04025-0A ALSO Fits our Signal Lens #11-2195 and Signals #11-2114 and #11-2149

USD$ 1.85
Listed Models
Honda CB650 Front Brake Caliper Piston Boot
USD$ 10.30
Listed Models

Front Brake Caliper Piston Boot

#73-1041 | Honda CB650 (1979-1981)

Front Brake Caliper Piston Rubber Dust Boot, Replaces OEM # 45109-425-003

USD$ 10.30
Listed Models
Honda CB650 Rear Wheel Damper Rubber
USD$ 12.55
Listed Models

Rear Wheel Damper Rubber

#73-1054 | Honda CB650 (1979-1982)

Rear Wheel Drive Damper Rubber, Replaces OEM # 41241-300-050 These fit between the rear wheel sprocket hub and the wheel hub and get worn down over time from use. Note: 4 Used Per Bike, Order The Quantity you Require

USD$ 12.55
Listed Models
Honda CB650 Seat Lock Bar Assembly
USD$ 39.95
Listed Models
Out of Stock
Email Me When Available

Seat Lock Bar Assembly

#73-1070 | Honda CB650 (1979)

Seat Lock Bar Assembly, Replaces OEM# 77220-340-003 / 77220-340-011

USD$ 39.95
Listed Models
Out of Stock
Email Me When Available
Honda CB650 Custom Brake Rod Adjuster Knob ~ Joker Machine
USD$ 19.95
Listed Models

Custom Brake Rod Adjuster Knob ~ Joker Machine

#73-1072 | Honda CB650 (1979-1982)

Joker Machine Brand ~ Custom Brake Rod Adjuster Knob, Replaces OEM # 95015-42000 Gives your bike a great custom look while refining the quality of your brake adjuster knob! Makes for super easy brake adjustments due to the choice of a knurled outside knob and a hex nut feature all in one. High quality CNC machined part, made in the U.S.A.

USD$ 19.95
Listed Models
Honda CB650 Custom Performance Magnetic Oil Drain Plug ~ Joker Machine
USD$ 29.55
Listed Models

Custom Performance Magnetic Oil Drain Plug ~ Joker Machine

#73-1074 | Honda CB650 (1981-1982), CB650 (1979-1980)

Joker Machine Brand ~ Custom Performance Magnetic Oil Drain Plug - 12mm. Dia x M1.5 - OEM Ref # 92800-12000 Plug features an extended length HIGH POWER "rare earth" Neodymium-Iron-Boron Magnet pressed into the body which grabs steel debris from your tank and motor exceptionally well! High Quality CNC machined part made in the U.S.A. Works on the oil tank drain (right side of bike) and on the oil pan drain (beneath the engine) - use two for the ultimate engine oil debris collection set-up.

USD$ 29.55
Listed Models
Honda CB650 Tach Drive Plug Block Off ~ Black ~ Joker Machine
USD$ 22.15
Listed Models

Tach Drive Plug Block Off ~ Black ~ Joker Machine

#73-1075 | Honda CB650 (1980-1982)

Joker Machine Brand ~ Black Tach Drive Plug (Block Off). This plug is generally used when the tachometer cable drive is removed and still needs to be blocked off to prevent oil leakage. This plug has an o-ring groove machined in it for better sealing. Several bike builders just cut the stock cable off and left the Honda cable drive end installed in the valve cover. This plug is a much cleaner option in both functionality and looks. These plugs are a real nice touch when you are not using the stock tachometer, and need to eliminate the cable, or are using an electronic tach. Installs in about a minute, no need to remove the valve cover to remove the tach drive gear assy. High quality CNC machined part, made in the U.S.A.

USD$ 22.15
Listed Models
Honda CB650 Front Stock Type Rim
USD$ 110.95
Listed Models

Front Stock Type Rim

#73-1077 | Honda CB650 (1980-1982)

Chrome Front Stock Type Rim, 1.85" Width x 19" x 40 Hole, Overall Actual Width 2.75". These are high quality rims made by D.I.D who originally made the OEM rims. Replaces OEM # 44701-405-771

USD$ 110.95
Listed Models
Honda CB650 Seat Cover
USD$ 73.95
Listed Models

Seat Cover

#73-1090 | Honda CB650 (1979)

Replacement Seat Cover with Reinforced Passenger Strap (No hardware or chrome trim included just re-use existing hardware). There is not a "Honda" stencil on the rear of the cover due to copyright. There is a layer of foam sewn into the top of the seat cover to improve ride comfort and smooth out any defects in your seat foam. Each seat cover is made entirely by hand, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Comes with complete installation instructions as well as step by step instructions on how to repair damaged seat foam. Fits: the Original Stock Honda CB650 (1979) Seat Only This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference

USD$ 73.95
Listed Models
Honda CB650 Turn Signal Relay
USD$ 7.35
Listed Models

Turn Signal Relay

#73-1104 | Honda CB650 (1979-1982)

Turn Signal (Flasher) Relay. OEM Style Replacement 12V/23W, 3 Prong, Comes with Rubber Mount Attached. Replaces OEM # 38301-415-671 Not for Use with Custom LED Lights

USD$ 7.35
Listed Models
Honda CB650 Steering Stem Washer
USD$ 3.65
Listed Models

Steering Stem Washer

#73-1127 | Honda CB650 (1979-1982)

Steering Stem Washer, Replaces OEM # 90503-425-000 Sold Each, order the quantity you require.

USD$ 3.65
Listed Models
Honda CB650 Steering Stem Nut
USD$ 5.90
Listed Models

Steering Stem Nut

#73-1128 | Honda CB650 (1979-1982)

Steering Stem Nut, Replaces OEM # 90304-425-000 Sold Each, we also offer the washer for this nut

USD$ 5.90
Listed Models
Honda CB650 Swing Arm Pivot Bolt Lock Nut and Washer
USD$ 6.60
Listed Models

Swing Arm Pivot Bolt Lock Nut and Washer

#73-1130 | Honda CB650 (1980-1982)

Swing Arm Pivot Bolt Lock Nut and Lock Nut Washer, Replaces OEM # 90354-425-830 (Nut), 90600-425-830 (Washer)

USD$ 6.60
Listed Models
The names Honda, Yamaha, Kawasaki, Suzuki and any other trade names or symbols belonging to each respective corporation are stated for reference purposes only. The products on this site are after market (not OEM) replacement parts and accessories only. We have no relationship to the listed companies.