HondaCB750 ► 

Honda CB750 Starter Brush Set
US$ 19.00
Fits: CB750

Starter Brush Set

#24-2021 | Honda CB750

Starter Brush Set/2 1Pc Insulated Leads 1Pc Non-Insulated Leads 12mm x 14mm x 6mm For Misuba 2 Brush Starter. OEM Ref # 31201-292-158 / 31201-MG9-004

Honda CB750 Starter Clutch Diode
US$ 9.00
Fits: CB750 (79-82)

Starter Clutch Diode

#24-2044 | Honda CB750 (1979-1982)

Starter Clutch Diode OEM Ref # 31700-124-003 / 31700-166-008

Honda CB750 Headlight Adjusting Screw & Spring Set
US$ 5.00
Fits: CB750 (95)

Headlight Adjusting Screw & Spring Set

#29-7011 | Honda CB750 (1995)

Headlight Adjusting Screw & Spring Set. Each Set Includes One Screw and One Spring. Replaces OEM # 33103-346-670 (Screw) and OEM # 33107-300-003 (Spring)

Honda CB750 Haynes Workshop Manual
US$ 30.00
Fits: CB750 (79-82)

Haynes Workshop Manual

#61-0535 | Honda CB750 (1979-1982)

Haynes Workshop Manual Honda CB750 & CB900 DOHC Fours 1978-1984

Honda CB750 Starter Motor Terminal Rubber Boot
US$ 4.50
Fits: Listed Models

Starter Motor Terminal Rubber Boot

#73-0092 | Honda CB750 (2001-2003), CB750 (1991-1993), CB750 (1995-2000)

Starter Motor Terminal (Cover) Rubber Boot. Replaces OEM#32411-230-000.

Honda CB750 Custom Micro Push Button/Kill Switch
US$ 14.00

Custom Micro Push Button/Kill Switch

#01-9924

Custom Micro Push Button/Kill Switch. High quality chrome switch designed to clean up the appearance of your bike while allowing the use of a switch. Works great as a hidden start/kill or horn button. Includes a contoured washer which allows for installations on round surfaces such as handlebars or frames. Switch Size 14mm x 12mm with 2X 20" wires.

Honda CB750 Viper Cafe Fairing
US$ 70.00

Viper Cafe Fairing

#04-0101

Universal Gloss Black Viper Cafe Racer Fairing with Smoked Windshield. Designed to protect the rider from wind pressure and debris. Mounting hardware included. Fits: Bikes With 7" or Smaller Headlights

Honda CB750 Custom Grey Windshield
US$ 69.95

Custom Grey Windshield

#04-0105

Custom Grey Acrylic Windshield. Includes 2 fully adjustable 7/8" clamps attached to the windshield which can be adjusted in just about any angle and direction for an easy install. Width 18.3", Height 22"

Honda CB750 Custom Clear Windshield
US$ 69.95

Custom Clear Windshield

#04-0106

Custom Clear Acrylic Windshield. Includes 2 fully adjustable 7/8" clamps attached to the windshield which can be adjusted in just about any angle and direction for an easy install. Width 18.3", Height 22"

Honda CB750 Custom Grey Windshield
US$ 64.95

Custom Grey Windshield

#04-0107

Custom Grey Acrylic Windshield. Includes 2 fully adjustable 7/8" clamps attached to the windshield which can be adjusted in just about any angle and direction for an easy install. Width 16.25", Height 18"

Honda CB750 Custom Clear Windshield
US$ 64.95

Custom Clear Windshield

#04-0108

Custom Clear Acrylic Windshield. Includes 2 fully adjustable 7/8" clamps attached to the windshield which can be adjusted in just about any angle and direction for an easy install. Width 16.25", Height 18"

Honda CB750 Venom Cafe Racer Fairing
US$ 75.00

Venom Cafe Racer Fairing

#04-0109

Universal Gloss Black Venom Cafe Racer Fairing with Smoked Windshield. Designed to protect the rider from wind pressure and debris. Mounts by using the side bolts of your headlight. Fits: Bikes With 7" or Smaller Headlights

Honda CB750 Replacement Sealed Beam 12V (5 3/4")
US$ 32.00

Replacement Sealed Beam 12V (5 3/4")

#09-0007

Replacement Sealed Beam 12 Volt 60/37W 5 3/4" Universal Sealed Beam - DOT & CHP Approved

Honda CB750 Replacement Sealed Beam 12V (7")
US$ 40.00

Replacement Sealed Beam 12V (7")

#09-0008

Replacement Sealed Beam 12 Volt 60/50W 7" Universal Sealed Beam

Honda CB750 Tommaselli Type Headlight Brackets (35mm-36mm)
US$ 32.00

Tommaselli Type Headlight Brackets (35mm-36mm)

#09-0012

Tommaselli Type Headlight Brackets 35-36mm

Honda CB750 Headlight Bracket Set
US$ 16.00

Headlight Bracket Set

#09-0013

Headlight Bracket Set - Chrome 3-Hole Type Universal Adjustable Fit - 32mm-38mm

Honda CB750 Tommaselli Type Headlight Brackets (40mm-41mm)
US$ 32.00

Tommaselli Type Headlight Brackets (40mm-41mm)

#09-0014

Tommaselli Type Headlight Brackets 40-41mm

Honda CB750 Tommaselli Type Headlight Brackets (32mm-34mm)
US$ 32.00

Tommaselli Type Headlight Brackets (32mm-34mm)

#09-0015

Tommaselli Type Headlight Brackets 32-34mm

Honda CB750 Headlight Bracket Set (35mm)
US$ 40.00

Headlight Bracket Set (35mm)

#09-0016

Aluminum Custom Headlight Brackets 35mm Headlight Mounting Holes 7/16"

Honda CB750 Headlight Bracket Set (34mm)
US$ 40.00

Headlight Bracket Set (34mm)

#09-0017

Aluminum Custom Headlight Brackets 34mm Headlight Mounting Holes 7/16"

Honda CB750 Headlight Bracket Set (41mm)
US$ 40.00

Headlight Bracket Set (41mm)

#09-0018

Aluminum Custom Headlight Brackets 41mm Headlight Mounting Holes 7/16"

Honda CB750 Headlight Bracket Set (36mm)
US$ 40.00

Headlight Bracket Set (36mm)

#09-0019

Aluminum Custom Headlight Brackets 36mm Headlight Mounting Holes 7/16"

Honda CB750 Headlight Bracket Set
US$ 16.00

Headlight Bracket Set

#09-0020

Headlight Bracket Set - Black 3-Hole Type Universal Adjustable Fit - 32mm-38mm

Honda CB750 Cast Aluminum Black Headlight Bracket Set
US$ 35.00

Cast Aluminum Black Headlight Bracket Set

#09-0021

Cast Aluminum Black Headlamp Mounting Bracket Set. Sold with adapters to fit 35mm, 39mm and 41mm fork tube outer diameters.

Honda CB750 Custom Universal Headlamp
US$ 65.00

Custom Universal Headlamp

#09-0023

Custom Universal Headlamp 4 1/2" Chrome bottom mount lamp assembly. High beam indicator. Halogen bulb and headlamp plug with wires.

Honda CB750 Custom Universal Headlamp
US$ 60.00

Custom Universal Headlamp

#09-0026

Custom Universal Headlamp 5 1/2" Chrome bottom mount lamp assembly. High beam indicator. Halogen bulb and headlamp plug with wires.

Honda CB750 Rectangular Headlamp
US$ 45.00

Rectangular Headlamp

#09-0027

Small Rectangular Headlamp 6.5"x4.5" Lens Steel Lens Frame, With Black Plastic Housing Halogen Bulb & Headlamp Plug With Wires Side Mount, 14mm Mounting Holes, 7.25" Width Two Openings On Back

Honda CB750 Custom Bates Style 4 1/2" Black Bottom Mount Headlight
US$ 45.00

Custom Bates Style 4 1/2" Black Bottom Mount Headlight

#09-0043

Custom Bates Style 4 1/2" Satin Black Bottom Mount Headlight. Glass sealed beam with a P15D base, 12 volt 35/35 watt bulb, 16" wire leads. Blue dot high/low beam indicator on top of light housing.

Honda CB750 Headlight Shell & Rim
US$ 60.00

Headlight Shell & Rim

#09-0047

Custom Ready to Assemble Chrome Side Mount Headlight Bucket Rim & Retainer. Designed for 7" sealed or non sealed H4 type headlights. Chrome all metal bucket with chrome trim ring. Side mounting holes are threaded (13.5mm). Outer side mounting points are 7-1/2" apart. Comes with a wired plug that works with sealed beam or H4 bulbs. H4 Beam Headlight sold separately #09-0072

Honda CB750 Classic Round Black Taillight
US$ 30.00

Classic Round Black Taillight

#09-0073

Classic Round Black Taillight with plate bracket. 2 1/4" Round lens (with a clear bottom to light up your plates), 12 Volt double filament bulb. Works as a running and brake light.

Honda CB750 Mini Bates Style LED Taillight ~ Chrome
US$ 32.00

Mini Bates Style LED Taillight ~ Chrome

#09-0074

Mini Bates Style LED Taillight ~ Chrome. 12 Volt taillight with 8 super bright LED's. Has running and brake light functions. Comes with mounting hardware and swivel bracket which allows it to be angled at different positions. Lens is 1 3/4" round, Outer bezel is 2 1/4" in diameter and is 2 1/4" long, Stands about 3" tall from base of mounting bracket. 3 Wire lead is about 12" long with bullet connectors. (Ground, running and brake light Wiring instructions) RED = Stop YELLOW = Running Lights BLACK = Ground

Honda CB750 Mini Bates Style LED Taillight ~ Black
US$ 32.00

Mini Bates Style LED Taillight ~ Black

#09-0075

Mini Bates Style LED Taillight ~ Black. 12 Volt taillight with 8 super bright LED's. Has running and brake light functions. Comes with mounting hardware and swivel bracket which allows it to be angled at different positions. Lens is 1 3/4" round, Outer bezel is 2 1/4" in diameter and is 2 1/4" long, Stands about 3" tall from base of mounting bracket. 3 Wire lead is about 12" long with bullet connectors. (Ground, running and brake light Wiring instructions) RED = Stop YELLOW = Running Lights BLACK = Ground

Honda CB750 Beehive Chrome Taillight
US$ 38.00

Beehive Chrome Taillight

#09-0076

Beehive Chrome Taillight Universal fender mounting for most applications. For under plate mounting, with upward plate illumination. 12 volt bulb, Gasket for fender mounting and plate bracket included. 6 3/4″ Length, 3″ Width, 4″ Height.

Honda CB750 Beehive Black Taillight
US$ 38.00

Beehive Black Taillight

#09-0077

Beehive Black Taillight Universal fender mounting for most applications. For under plate mounting, with upward plate illumination. 12 volt bulb, Gasket for fender mounting and plate bracket included. 6 3/4″ Length, 3″ Width, 4″ Height.

Honda CB750 Vintage Round Black Taillight
US$ 42.00

Vintage Round Black Taillight

#09-0080

Vintage All Steel Round Satin Black Taillight with plate bracket. 1 5/8" Round real glass lens (with a clear bottom to light up your plates), 12 volt double filament bulb. Works as a running and brake light. Base mounting plate measures 2" top to bottom and 2 1/2" wide. Mounting base 6mm holes are 1 1/4" wide x 7/8" top to bottom, tag mounting plate measures 6 1/2" wide, tag mounting holes 4 1/2" centered.

Honda CB750 Black Sparto Tailight
US$ 48.00

Black Sparto Tailight

#09-0083

Tail Light Assembly - Black Sparto Classic 50's design. Dual filament Bulb. Not DOT approved for Highway use.

Honda CB750 Headlight Shell and Rim
US$ 32.00

Headlight Shell and Rim

#09-0084

Custom 7" Satin Black Side Mount Headlight Shell with Chrome Trim Ring. Designed for 7" sealed type headlights. Includes a 3 wire plug that works with sealed beam or H4 bulbs as well as the clip/screw and wire clips. Side mounting holes are threaded to use 5/16-24 bolts (bolts not included). Outer side mounting points are 7" apart. 3" Mounting depth from mounting holes to the back of the bucket. Sealed beam Headlight sold separately #09-0008 (Below), or the upgraded halogen beam #09-0051

Honda CB750 LED Taillight
US$ 50.00

LED Taillight

#09-0085

Custom LED Taillight. Small and lightweight, this cool little LED taillight includes a swiveling mounting bracket with about 100 degrees of up or down adjustment making it ideal for many custom applications. Featuring a clear lens with 8 super bright red LED's for the taillight and brake light as well as 5 clear LED's for the license plate illumination. Machined from aluminum in anodized black. Not DOT approved. Dimensions are approximately 1-7/8" wide x 1-3/4" deep.

Honda CB750 Custom Chrome Dual Beam Headlights
US$ 65.00

Custom Chrome Dual Beam Headlights

#09-0087

Custom Chrome 4" Dual Beam Headlight Set. Complete universal side mount dual hi/low beam head light assembly. The two high quality glass sealed beam style lights have H4 60/55 watt bulbs along with pilot running lights in each light. Assembled and pre-wired harness to simply plug into your existing H4 plug. Side mounting bolts hole are threaded for M8 x 1.25 bolts. Total outer width at side mounting bolts in 8 1/2" wide. Center of mounting bolts to rear of the light bucket is 2 5/8" in depth. From the front of the trim ring to the rear of the bucket is about 4 1/2" in depth.

Honda CB750 Custom Matte Black Dual Beam Headlights
US$ 65.00

Custom Matte Black Dual Beam Headlights

#09-0088

Custom Matte Black 4" Dual Beam Headlight Set. Complete universal side mount dual hi/low beam head light assembly. The two high quality glass sealed beam style lights have H4 60/55 watt bulbs along with pilot running lights in each light. Assembled and pre-wired harness to simply plug into your existing H4 plug. Side mounting bolts hole are threaded for M8 x 1.25 bolts. Total outer width at side mounting bolts in 8 1/2" wide. Center of mounting bolts to rear of the light bucket is 2 5/8" in depth. From the front of the trim ring to the rear of the bucket is about 4 1/2" in depth.

Honda CB750 Custom Bates Style 5 3/4" Black Bottom Mount Headlight
US$ 47.00

Custom Bates Style 5 3/4" Black Bottom Mount Headlight

#09-0089

Custom Bates Style 5 3/4" Satin Black Bottom Mount Headlight. Glass sealed beam, 12 Volt 60/55 watt dual filament H4 bulb, 16" wire leads. Blue dot high/low beam indicator on top of light housing. Comes with a 3 wired plug that works with H4 bulbs. Assembled ready to mount, hook up the 3 wires and ride!

Honda CB750 Black Projected Sparto Tailight
US$ 38.00

Black Projected Sparto Tailight

#09-0092

Black Sparto Taillight with a Projected 1 7/8" Lens. Made from Aluminum with 12" 2 wire leads self grounding for easy hook up. 5 3/4" long, 4 7/8" wide and 3 1/4" tall. Includes dual filament bulb 12V 23/8W and mounting hardware.

Honda CB750 Chrome Mini Retro Hooded Tail Light
US$ 37.00

Chrome Mini Retro Hooded Tail Light

#09-0093

Chrome Mini Retro Hooded Tail Light with Mounting Hardware. Features a pivoting mounting base bracket. Includes running light, brake light and tag light functions. Uses a standard 21/5 watt 1157 bulb. Wire lead is about 10" long. Housing is 2 1/8" round x 3 3/8" long over all. Stands about 3 1/4" tall from base of mounting bracket. Mounting base is 2" long x 3/4" wide. Mounting bolt holes are 1/4" holes x 1 1/4" center to center.

Honda CB750 Satin Black Mini Retro Hooded Tail Light
US$ 37.00

Satin Black Mini Retro Hooded Tail Light

#09-0094

Satin Black Mini Retro Hooded Tail Light with Mounting Hardware. Features a pivoting mounting base bracket. Includes running light, brake light and tag light functions. Uses a standard 21/5 watt 1157 bulb. Wire lead is about 10" long. Housing is 2 1/8" round x 3 3/8" long over all. Stands about 3 1/4" tall from base of mounting bracket. Mounting base is 2" long x 3/4" wide. Mounting bolt holes are 1/4" holes x 1 1/4" center to center.

Honda CB750 Custom Mini Deco Turn Signal Lamp Set
US$ 35.00

Custom Mini Deco Turn Signal Lamp Set

#09-0095

Custom Mini Deco Turn Signal Lamp Set/2. High quality die cast body with interchangeable lenses (amber and red). Can be wired as turn signals or running lights. Stem base to outer edge of body 2 1/2", body is 1 7/8" x 2 7/8" long, mounting stud 1/4" diameter x 3/4" long

Honda CB750 Turn Signal Light Mount Bracket Holder Set
US$ 10.00

Turn Signal Light Mount Bracket Holder Set

#09-0098

Black Metal Fork Ear Clamp/Turn Signal Light Mount Bracket Holder Set/2 with Screws, Washers and Nuts. Fits 30-45mm Front Forks

Honda CB750 Turn Signal Light Mount Bracket Holder Set
US$ 10.00

Turn Signal Light Mount Bracket Holder Set

#09-0099

Chrome Metal Fork Ear Clamp/Turn Signal Light Mount Bracket Holder Set/2 with Screws, Washers and Nuts. Fits 30-45mm Front Forks

Honda CB750 Vintage Round Chrome Taillight
US$ 40.00

Vintage Round Chrome Taillight

#09-0100

Vintage All Steel Round Chrome Taillight with plate bracket, bolts and washers. 1 5/8" Round plastic lens (with a clear bottom to light up your plates), 12 volt double filament bulb. Works as a running and brake light. Base mounting plate measures 2" top to bottom and 2 1/2" wide. Mounting base 6mm holes are 1 1/4" wide x 7/8" top to bottom, tag mounting plate measures 6 1/2" wide, tag mounting holes 4 1/2" centered.

Honda CB750 Chrome Sparto Tailight
US$ 48.00

Chrome Sparto Tailight

#09-0101

Tail Light Assembly - Chrome Sparto Design. Dual filament Bulb. Not DOT approved for Highway use.

Honda CB750 Headlamp Plug
US$ 4.00

Headlamp Plug

#10-1155

Headlamp Plug (3 Prong)

The names Honda, Yamaha, Kawasaki, Suzuki and any other trade names or symbols belonging to each respective corporation are stated for reference purposes only. The products on this site are after market (not OEM) replacement parts and accessories only. We have no relationship to the listed companies.