Honda ► CB750K ►
-
Here’s our hand-picked list of parts and accessories for your Honda CB750K with universal parts included that match “honda sl125”►
- Honda
Front Fork Top Bridge / Triple Tree Washer Kit
Front Fork Top Bridge / Triple Tree Washer Kit of 2 Washers. These washers are needed in order to avoid broken top triple trees when you tighten up your fork tube clamps. Replace # OEM 53235-300-000
Float Bowl Drain Screw
Float Bowl Drain Screw w O-Ring. Note: We sell these each, order the quantity you require
Points Cover Screws
Points Cover Screws (Set of 2). Fits: ALL 1969-1978 Honda CB750 Points Covers and Our Points Cover (Part #13-0000).
Seat Hinge Set
Seat Hinge Set, This set is a reproduction of the original hinges no longer available from Honda. Set includes Hinge A, Hinge B, 2 Long Pins, 2 Attachment Lock Pins and 2 Washers.
Chrome Side Grab Bar
Chrome Side Grab Bar, Replaces OEM # 50316-300-030 Replace that old worn out grab bar with a new one to add to the look of your bike! Some people put these on both sides. Fits: Honda CB750K (1969-71), CB750K (1972-76) * fits if you don't have the Full Grab Rail installed * Fits: Honda CB400F (1975-77) Supersport * Fits without any modifications but has a slightly different angle then the stock type *
Gas Tank Emblem
Gas Tank Emblem, Replaces OEM# 87122-300-020 / 87121-300-020 Fits: Honda CB750K (1969) CB750K (1970) - Frame Number 1044649 and lower Sold Each, Order the Quantity you Require
Stock Type Speedo/Tach Clamp Hardware Set
8 Speedo/Tach Clamp Hardware Set. This Set includes hardware for both speedo and tach clamps. Fits: Honda CB750K (1969-72) Stock Type Speedo and Tach Clamps This hardware set is used with our parts #73-1051 and #73-1052.
Exhaust Flange Clamp with Bolt ~ Right Side
Chrome Exhaust Flange Clamp with Bolt for One of the Stock Type Mufflers on the Right Side of the Bike. Replaces OEM # 18231-300-010 Fits: Honda CB750K (1971-76) Right Side Muffler Note: Each Bike Requires 2 Right Side Exhaust Flange Clamps(One per Muffler). Order the Quantity you Require.
Exhaust Flange Clamp with Bolt ~ Left Side
Chrome Exhaust Flange Clamp with Bolt for One of the Stock Type Mufflers on the Left Side of the Bike. Replaces OEM # 18232-300-010 Fits: Honda CB750K (1971-76) Left Side Muffler Note: Each Bike Requires 2 Left Side Exhaust Flange Clamps(One per Muffler). Order the Quantity you Require.
Handlebar Clamp Hardware Set
Handlebar Clamp Hardware Set. Set Includes 4 Chrome Plated Bolts and 4 Washers. This Hardware Set is for the Stock Type Clamp (Holder) that Attaches Over the Handlebar. Replaces OEM # 93101-08040-0B X4 (Bolts) and 90518-921-000 X4 (Washers). Fits: Stock Type Handlebar Clamps on the Honda CB750K (1969-75)
Seat Cover
Replacement Seat Cover with Reinforced Passenger Strap (No trim or hardware included just re-use existing hardware). There is not a "Honda" stencil on the rear of the cover due to copyright. There is a layer of foam sewn into the top of the seat cover to improve ride comfort and smooth out any defects in your seat foam. Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Comes with complete installation instructions as well as step by step instructions on how to repair damaged seat foam. Fits: the Original Stock Honda CB750K (1969-70) WITH THE DUCK TAIL STYLE SEAT ONLY. If you have a CB750K 1970 see our listing below to compare the regular style to the duck style to ensure you are ordering the correct cover. The duck tail has a raised end and also has a different stitching pattern as shown. This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
Seat Cover
Replacement Seat Cover with Reinforced Passenger Strap (No chrome trim or hardware included just re-use existing hardware). There is NO HONDA LOGO ON THE REAR. There is a layer of foam sewn into the top of the seat cover to improve ride comfort and smooth out any defects in your seat foam. Each seat cover is made entirely by hand, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Comes with complete installation instructions as well as step by step instructions on how to repair damaged seat foam. Fits: the Original Stock Honda CB750K (1972-76) Seat Only This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
Seat Cover
Replacement Seat Cover with Reinforced Passenger Strap (No hardware or chrome trim included just re-use existing hardware). There is not a "Honda" stencil on the rear of the cover due to copyright. There is a layer of foam sewn into the top of the seat cover to improve ride comfort and smooth out any defects in your seat foam. Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Comes with complete installation instructions as well as step by step instructions on how to repair damaged seat foam. Fits: the Original Stock Honda CB750K (1978) Seat Only This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
Seat Cover
Replacement Seat Cover (No hardware or chrome trim included just re-use existing hardware). There is not a "Honda" stencil on the rear of the cover due to copyright. There is a layer of foam sewn into the top of the seat cover to improve ride comfort and smooth out any defects in your seat foam. Each seat cover is made entirely by hand, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Comes with complete installation instructions as well as step by step instructions on how to repair damaged seat foam. Fits: the Original Stock Honda CB750K (1980-82) Seat Only This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
Seat Cover
Replacement Seat Cover with Reinforced Passenger Strap (No trim or hardware included just re-use existing hardware). There is not a "Honda" stencil on the rear of the cover due to copyright. There is a layer of foam sewn into the top of the seat cover to improve ride comfort and smooth out any defects in your seat foam. Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Comes with complete installation instructions as well as step by step instructions on how to repair damaged seat foam. Fits: the Original Stock Honda CB750K (1970-71) WITH THE NON DUCK TAIL STYLE SEAT ONLY If you have a CB750K 1970 see our listing above to compare the regular style to the duck tail style to ensure you are ordering the correct cover. The duck tail has a raised end and also has a different stitching pattern as shown. This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
Exhaust Hardware Set
Exhaust Hardware 10 Piece Set. This Set includes various hard to find hardware needed to install the Stock OEM Type Exhaust. Set Includes: X1 stand stopper rubber C 95011-63000 X1 stand stopper rubber A 95011-63000 X2 pillon step bolt 90146-300-020 X2 nut 94030-12000 X2 flat washer 94102-12000 X2 spring washer 94111-12000 Fits: Stock Type Exhaust on Honda CB750K (1969-76) Note: Exhaust Flange Clamps and Exhaust Pipe Flanges with Hardware are Not Included in this Set, We Sell them Separate.
Side Stand Pivot Bolt & Nut Set
Side Stand Pivot Bolt & Nut Set, This is the Set Used to Fasten the Side Stand in Place. Replaces OEM # 90108-283-000 (Bolt) and 94002-10000-0S (Nut).
Lens Screw
Tail Light Lens Screws, Pack of 10 Screws. Replaces OEM # 93500-04055-4J ISO Std. Pitch - Steel Plated Size: 4 x 55mm
Chain Guard
Chain Guard, Replaces OEM# 40510-341-010B This flat black chain guard replaces the original metal one which was prone to rusting. Easy stock mount, this is a simple way to spruce up the look of your bike!
Clutch Lever Return Spring
Clutch Lever Return Spring. This is the Spring Located Behind the Clutch Cover. Replaces OEM # 22815-300-000
Clutch Adjuster Bolt
Clutch Adjuster Bolt, Replaces OEM# 22841-425-000
Side Stand Spring
Side Stand Spring, Replaces OEM # 95014-72402
Fuse Box Plate Cover Screw Set
Black Fuse Box Plate Cover Screw (Set of 2). Replaces OEM # 93700-05020-0G
Black Steering Stem Nut ~ Joker Machine
Joker Machine Brand ~ Black Steering Stem Nut, Hex Nut Size 30mm. Replaces OEM # 90304-415-000 High quality CNC machined part made in the U.S.A.
Billet Aluminum Upper Triple Tree Clamp
Custom Billet Aluminum Machined Upper Triple Tree Clamp. This billet triple has 2X 6mm mounting bosses 50mm apart on the underside of the top triple to accommodate various aftermarket and custom designed instrument mounts for your aftermarket gauges. Designed so the top triple has a rounded top edge with a stylish inset and makes an excellent replacement for the stock cast item when using clip-on bars! This piece was designed to make it very easy for the average Cafe builder to modify their motorcycle. Very High quality, machined in North America. Clip on bars not included and your stock bars will NOT mount to this piece.
Front Fender Hardware/ Fender Stay Hardware Set
3 PC. Front Fender Hardware/ Fender Stay Hardware Set. Includes Setting Rubber, Bolt and Metal Collar. Replaces OEM#40513-310-000 (Rubber), OEM#40514-310-000 (Metal Collar) and OEM#92101-06020-0A (Bolt). Purchase the Quantity of Sets you Require for your Application
Side Stand Rubber Hardware Set
Side Stand Rubber Hardware Set, Includes Metal Collar and Silver Colored Flange Bolt.
Float Bowl Drain Screw O-Rings Pk/4
Float Bowl Drain Screw O-Rings Pk/4
Carburetor Cap Screw Set/8
Carburetor Cap Screw Set/8 with Metal Washers.
Seat Lock with Keys
Seat Lock with Keys, Replaces OEM # 77230-399-007 / 77230-107-711 This seat lock works perfect for the bikes listed but the locking mechanism sticks out a bit farther then the OEM type. If you have lost your old key you have to remove the seat lock bracket and assembly. This can be done with a short 10mm wrench or socket, once that's done the rest is easy.
Float Bowl Drain Screw O-Rings Pk/4
Float Bowl Drain Screw O-Rings Pk/4
DOHC Screw Set
71PC DOHC Screw Set, Includes Front Stay Plate Screws (8), CV Cap Screws (8), Throttle Cable Bracket Screw (1), Rear Stay Plate Screws (8), Vacuum Petcock Screws (6), Bowl Screws (12), Accelerator Pump Cover Screws (3), Air Cutoff Screws (8), Choke Cable Clamp Screw (1), Throttle Plate Screws (8) and Choke Plate Screws (8).
Center Stand Spring Plate
Center Stand Spring Plate, This is the Plate the Center Stand Spring Attaches to. Replaces OEM # 50523-425-000
Tappet Adjuster Screw & Nut Set
Tappet Adjuster Screw & Nut Set. Each Set includes one Tappet Adjuster Screw and one Nut. Replaces OEM # 90012-426-000 (Adjuster), OEM # 90206-250-000 (Nut). Note: Order the Quantity of Sets your Bike Requires
Seat Lock Bar Assembly
Seat Lock Bar Assembly, Replaces OEM# 77220-340-003 / 77220-340-011
Exhaust Flange Clamps
Stock Type Exhaust Flange Clamp, Replaces OEM# 18231-392-000 Note: Each Bike Requires 4 Exhaust Flange Clamps. Order the Quantity you Require.
Shock Absorber Nut
Shock Absorber Nut, Used when Installing Shocks. Replaces OEM # 90309-315-000 Note: Nuts sold Each, order the quantity you require
Cylinder Head Cam Cover Breather Hardware Set
Cylinder Head Cam Cover Breather Hardware Set. Replaces OEM # 90018-300-000 X2 and OEM # 93500-06050-0A X1.
Exhaust Stud Set
Exhaust Stud Set. Includes 8 Exhaust Studs and 8 Flange Nuts.
Joker Machine Oil Tank Mounting Bushing Set/3
Joker Machine Brand Oil Tank Mounting Bushing Set/3 This set is for those who are running no oil tank side covers and an exposed stock oil tank. These trim bushings and grommets are a great alternative to the stock hardware! Stepped "Isolator" designed bushing obtains the right amount of tension on the rubber when fully tightened to reduce vibration on the oil tank. Bushing is fully CNC machined from 6061-T6 Aluminum. High quality alloy "Gold" Allen head mounting hardware is included, along with special rubber grommets.
Steering Bearing Kit
Tapered Roller Steering Bearing Conversion Kit. Superior to OEM quality, 10X the contact area and less flex. Designed as a drop in replacement for the original bearing. Kit is complete with upper and lower tapered bearing races. High quality made in Japan.
Rear Sprocket Bolt & Nut Set
Rear Sprocket Stud Bolt (12x54) & Nut Set. Set includes 4 Stud Bolts and 4 Nuts. These Stud Bolts Fasten to the Centre Wheel Flange and Rear Sprockets. Replaces OEM # 90128-341-000 X4 (Bolts), 94030-12000 X4 (Nut)
Engine Bolt Set
Engine Bolt Set, 60 Pieces, Includes 13 Different Bolt Types and 2 Allen Keys.
Side Stand Rubber Hardware Set
Side Stand Rubber Hardware Set, Includes Metal Collar, Bolt and Washer.
Clutch Cover Screw Set
Clutch Cover Screw Set of 10 Screws. Replaces OEM # 93500-06028-0A X7 and 93500-06035-0A X3.
Pilot Indicator Light Cover
Pilot Indicator Light Cover, Replaces OEM# 37600-377-018 This includes the front and rear cover with fastening screws.
Float Bowl Drain Screw
Float Bowl Drain Screw w O-Ring. Note: We sell these each, order the quantity you require
Steering Stem Washer
Chrome Steering Stem Washer, Replaces OEM # 90503-283-000 Sold Each, order the quantity you require.
Steering Stem Nut
Steering Stem Nut, Replaces OEM # 90304-425-000 Sold Each, we also offer the washer for this nut
Turn Signal Lamp Lens Screw Set
Turn Signal Lamp Lens Screw Set/2, Replaces OEM # 93500-04025-0A ALSO Fits our Signal Lens #11-2195 and Signals #11-2114 and #11-2149