Notice: During this worldwide fight against COVID-19 we will continue shipping orders daily with a very limited workforce and will complete daily workplace sanitation to prevent the spread of this disease. Thank you for your support during this time and we hope you and your family stay safe.

HondaCB750K ► 

Refine Search Results
Honda CB750K Wire Harness
USD$ 75.00
Fits: CB750K (73-75)

Wire Harness

#24-4001 | Honda CB750K (1973-1975)

Wire Harness OEM Ref # 32100-341-703

Honda CB750K Alternator Stator Wire Harness
USD$ 30.00
Fits: CB750K (69-78)

Alternator Stator Wire Harness

#24-4021 | Honda CB750K (1969-1978)

Alternator Stator Wire Harness, This Harness has the Same 7 Wire Plug as the OEM part and Hooks up Without Alterations. Replaces OEM # 31110-300-154

Honda CB750K Oil Pressure Switch Wire Assembly
USD$ 27.00
Fits: CB750K (69-78)

Oil Pressure Switch Wire Assembly

#24-4020 | Honda CB750K (1969-1978)

Oil Pressure Switch Wire Assembly. Includes the Wire and Rubber Cover. Replaces OEM # 31270-300-154 / 31270-300-005

Honda CB750K Tail Light Cable Set
USD$ 8.00
Fits: CB750K (70-76)

Tail Light Cable Set

#73-0084 | Honda CB750K (1970-1976)

Tail Light/Brake Light Cable Set of 3. Replaces OEM # 33711-323-000 (Tail Light Sub Cable), OEM # 33712-300-003 (Taillight Ground Cable) and OEM # 33713-323-000 (Stop Light Sub Cable).

Honda CB750K Dynatek Dyna 2000 Digital Perfomance Ignition
USD$ 472.45
Fits: CB750K (69-78)

Dynatek Dyna 2000 Digital Perfomance Ignition

#07-9994 | Honda CB750K (1969-1978)

Dynatek Dyna 2000 Digital Performance CDI Ignition. The Dyna 2000 Digital Performance Ignition represents a breakthrough in motorcycle ignition flexibility. The Dyna 2000 system consists of a state of the art microprocessor controlled ignition module along with an adjustable Dyna dual sensor crank trigger. For the first time you can actually set the ignition timing to what you want to maximize engine performance. A number of different advance curve modes and a broad range rev limiter lets you tailor the ignition to your needs. Up to a 7 horsepower increase! This is a very high quality kit that will increase the performance of your bike! Made in the USA. Features - 5 Different adjustable timing curves, 4 Different retard modes, Fully static time-able with built in LED light (Set the timing accurately without having the engine running), Broad range rev limiter (8,500 to 16,000), Increased horsepower & torque, Digital tach output (smooth & accurate), Increased spark energy, Improved throttle response & easier starting, Easy mounting. Includes the Dyna 2000 unit, complete wiring harness, ignition plate unit with rotor and full instructions. Comes with a one year warranty from Dynatek.

Honda CB750K Dynatek Dyna 2000 Digital Perfomance Ignition (Ultimate Kit)
USD$ 674.25
Fits: CB750K (69-78)

Dynatek Dyna 2000 Digital Perfomance Ignition (Ultimate Kit)

#07-9992 | Honda CB750K (1969-1978)

Dynatek Dyna 2000 Digital Performance CDI Ignition Ultimate Kit with 2X Dynatek Brand 3 Ohm Dual Output Coils and Dynatek Brand High Performance Spark Plug Wires. The Dyna 2000 Digital Performance Ignition represents a breakthrough in motorcycle ignition flexibility. The Dyna 2000 system consists of a state of the art microprocessor controlled ignition module along with an adjustable Dyna dual sensor crank trigger. For the first time you can actually set the ignition timing to what you want to maximize engine performance. A number of different advance curve modes and a broad range rev limiter lets you tailor the ignition to your needs. Up to a 7 horsepower increase! This is a very high quality kit that will increase the performance of your bike! Made in the USA. Features - 5 Different adjustable timing curves, 4 Different retard modes, Fully static time-able with built in LED light (Set the timing accurately without having the engine running), Broad range rev limiter (8,500 to 16,000), Increased horsepower & torque, Digital tach output (smooth & accurate), Increased spark energy, Improved throttle response & easier starting, Easy mounting. Includes the Dyna 2000 unit, complete wiring harness, ignition plate unit with rotor and full instructions, 2X Dynatek 3 Ohm coils, Dynatek spark plug wire set. Ignition unit comes with a one year warranty from Dynatek.

Honda CB750K Dynatek Dyna 2000 Digital Perfomance Ignition (Premium Kit)
USD$ 584.95
Fits: CB750K (69-78)

Dynatek Dyna 2000 Digital Perfomance Ignition (Premium Kit)

#07-9993 | Honda CB750K (1969-1978)

Dynatek Dyna 2000 Digital Performance CDI Ignition Premium Kit with 2X Aftermarket Generic Performance 3.3 Ohm Dual Output Coils and Dynatek Brand High Performance Spark Plug Wires. The Dyna 2000 Digital Performance Ignition represents a breakthrough in motorcycle ignition flexibility. The Dyna 2000 system consists of a state of the art microprocessor controlled ignition module along with an adjustable Dyna dual sensor crank trigger. For the first time you can actually set the ignition timing to what you want to maximize engine performance. A number of different advance curve modes and a broad range rev limiter lets you tailor the ignition to your needs. Up to a 7 horsepower increase! This is a very high quality kit that will increase the performance of your bike! Made in the USA. Features - 5 Different adjustable timing curves, 4 Different retard modes, Fully static time-able with built in LED light (Set the timing accurately without having the engine running), Broad range rev limiter (8,500 to 16,000), Increased horsepower & torque, Digital tach output (smooth & accurate), Increased spark energy, Improved throttle response & easier starting, Easy mounting. Includes the Dyna 2000 unit, complete wiring harness, ignition plate unit with rotor and full instructions, 2X coils, Dynatek spark plug wire set. Ignition unit comes with a one year warranty from Dynatek.

Honda CB750K NGK Spark Plug
USD$ 6.50
Fits: CB750K (69-81)
Out of Stock

NGK Spark Plug

#50-8600 | Honda CB750K (1969-1981)

NGK D8EA Spark Plug - Standard Original CB750 Spark Plug 4 required per CB750, Order the quantity you require.

Honda CB750K NGK Iridium Spark Plug
USD$ 17.00
Fits: CB750K (69-82)

NGK Iridium Spark Plug

#50-8605 | Honda CB750K (1969-1982)

NGK DR8EIX Iridium Spark Plug Cheapest Horsepower You Can Buy for your CB! Adds a Solid 1-2 HP to your Bike! 4 required per bike, Order the Quantity you require.

Honda CB750K Turn Signal Lamp
USD$ 28.00
Fits: CB750K (75-78)

Turn Signal Lamp

#11-2114 | Honda CB750K (1975-1978)

Turn Signal Lamp - Front 2-Wire OEM Ref # 33400-377-671 / 33400-460-671 / 33400-460-679

Honda CB750K Turn Signal Lamp
USD$ 28.00
Fits: CB750K (75-78)

Turn Signal Lamp

#11-2149 | Honda CB750K (1975-1978)

Turn Signal Lamp 1-Wire - Rear OEM Ref # 33400-377-671 / 33400-460-671 / 33400-460-679

Honda CB750K Rectifier
USD$ 80.00
Fits: CB750K (69-78)

Rectifier

#24-2111 | Honda CB750K (1969-1978)

Rectifier ONLY 3Phase - 5 Wire - 3 AC In - 2 DC Out OEM Ref # 31700-333-008 / 31700-323-015

Honda CB750K Handlebar - Stock Type ~ CB750K 1973-76 / CB750F 1975-76
USD$ 46.95
Fits: CB750K (73-76)

Handlebar - Stock Type ~ CB750K 1973-76 / CB750F 1975-76

#73-0154 | Honda CB750K (1973-1976)

Stock Type Handlebar for the CB750K (1973-76), CB750F (1975-76) - Chrome. Drilled for wires like the OEM type. Width 32" - Rise 7" - Pullback 4" x 7/8"Dia. Replaces OEM # 53100-341-700 Note: These Are Drilled For Wires

Honda CB750K Tail Light Assembly
USD$ 42.00
Fits: CB750K (72-78)

Tail Light Assembly

#73-1098 | Honda CB750K (1972-1978)

Tail Light Assembly. Includes Brake Light Lens, Back Plate, Screws, Gasket, Wires, Connector and Bulb. Replaces OEM # 33701-341-671 / 33701-341-910 / 33701-342-671 Two Bolt Back Mounting Bolt Pattern (Approx 4" Center to Center), 3 Wires, Ready to Mount to your Bike!

Honda CB750K Dynatek Dyna S Ignition System (Ultimate Kit)
USD$ 412.45
Fits: CB750K (69-78)

Dynatek Dyna S Ignition System (Ultimate Kit)

#07-9986 | Honda CB750K (1969-1978)

Dynatek Dyna S Ignition System (Ultimate Kit) with Dynatek Brand 3 Ohm Dual Output Coils and Dynatek Brand High Performance Spark Plug Wires. The Dyna S is a complete self-contained electronic ignition system built with the latest state-of-the-art engineering. This is the same ignition used by top racers over the past 2 decades. The Dyna S is completely housed behind the ignition cover and uses a magnetic rotor with the original spark advancer, so the factory advance curve is maintained. Increases power and reduces vibration, backfiring and intake reversion, especially on engines with radical cam timing. Front and rear cylinder timing may be set individually. Perfect for hot dual-plugged engines. The Dyna S ignition is a time proven solution to the basic ignition and trigger needs of the modern motorcycle. The Dyna S is the standard of performance and reliability. Very high quality made in the USA. Includes instructions and comes with a one year warranty through Dynatek.

Honda CB750K Dynatek Dyna S Ignition System (Premium Kit)
USD$ 359.95
Fits: CB750K (69-78)

Dynatek Dyna S Ignition System (Premium Kit)

#07-9987 | Honda CB750K (1969-1978)

Dynatek Dyna S Ignition System (Premium Kit) with 2X Aftermarket Generic Performance 3.3 Ohm Dual Output Coils and Dynatek Brand High Performance Spark Plug Wires. The Dyna S is a complete self-contained electronic ignition system built with the latest state-of-the-art engineering. This is the same ignition used by top racers over the past 2 decades. The Dyna S is completely housed behind the ignition cover and uses a magnetic rotor with the original spark advancer, so the factory advance curve is maintained. Increases power and reduces vibration, backfiring and intake reversion, especially on engines with radical cam timing. Front and rear cylinder timing may be set individually. Perfect for hot dual-plugged engines. The Dyna S ignition is a time proven solution to the basic ignition and trigger needs of the modern motorcycle. The Dyna S is the standard of performance and reliability. Very high quality made in the USA. Includes instructions and comes with a one year warranty through Dynatek.

Honda CB750K Dynatek Dyna S Ignition System
USD$ 209.95
Fits: CB750K (69-78)

Dynatek Dyna S Ignition System

#07-9988 | Honda CB750K (1969-1978)

Dynatek Dyna S Ignition System. The Dyna S is a complete self-contained electronic ignition system built with the latest state-of-the-art engineering. This is the same ignition used by top racers over the past 2 decades. The Dyna S is completely housed behind the ignition cover and uses a magnetic rotor with the original spark advancer, so the factory advance curve is maintained. Increases power and reduces vibration, backfiring and intake reversion, especially on engines with radical cam timing. Front and rear cylinder timing may be set individually. Perfect for hot dual-plugged engines. The Dyna S ignition is a time proven solution to the basic ignition and trigger needs of the modern motorcycle. The Dyna S is the standard of performance and reliability. Very high quality made in the USA. This ignition can be used with your stock coils or any other coils 3 ohms or higher. Includes instructions and comes with a one year warranty through Dynatek.

Honda CB750K Fender Eliminator Taillight
USD$ 25.00
Fits: CB750K (69-76)

Fender Eliminator Taillight

#11-2325 | Honda CB750K (1969-1976)

Fender Eliminator 12 Volt Taillight with 2 Wires. This fits to our fender eliminator (#73-1144) and looks great! Note: Photo shows Taillight Mounted to Fender Eliminator #73-1144 for Reference Only, it is not included with this item. Please purchase it separate

Honda CB750K Clymer CB750 Service Manual - Honda CB750 SOHC
USD$ 32.00
Fits: CB750K (69-78)

Clymer CB750 Service Manual - Honda CB750 SOHC

#61-1160 | Honda CB750K (1969-1978)

Clymer Service Manual. Includes 11 Chapters of Maintenance, Troubleshooting and Repair information and tips. Features full color wiring diagrams for your reference. Honda CB750 (1969-78) SOHC Four

Honda CB750K Rectifier/Regulator
USD$ 109.00
Fits: CB750K (69-78)
Out of Stock

Rectifier/Regulator

#73-1153 | Honda CB750K (1969-1978)

Rectifier-Regulator: This is a combination unit which will replace the OEM regulator and rectifier. This has the OEM type ground wiring and Stock Type Plugs. Dimensions 80mm Length, 94mm Width, 27mm Height, Hole Distance 70.0mm Center to Center. Instructions not included.

Honda CB750K Round Pod Air Filter ~ Black/Red
USD$ 16.00
Fits: CB750K (69-76)

Round Pod Air Filter ~ Black/Red

#15-0020-A | Honda CB750K (1969-1976)

39mm Round Pod Air Filter ~ Black Body with Red Foam Filter - Circular style with Black end cap. Provides for greater air flow, especially when using an aftermarket exhaust and has improved flow characteristics compared to the plain wire type mesh Pod filters. Filter is supplied dry but washable filtration material may be oiled for improved dust filtration.

Honda CB750K High Performance Kibblewhite Valve Spring Set
USD$ 88.00
Fits: CB750K (69-77)

High Performance Kibblewhite Valve Spring Set

#73-1015 | Honda CB750K (1969-1977)

High Performance Kibblewhite Valve Spring Set of 8. Made in the USA by Kibblewhite who have been making High Quality Performance parts for 75+ years. The springs in these kits are wound from super clean chrome silicon wire that has been heat treated and shot peened. These components offer optimal fitment, keeping lateral movement to a minimum. They work together as a system, providing long life, and maximum performance. Note: This Spring Set is Designed to work with the OEM Retainer/ Spring Base. To improve Performance Further we also carry Kibblewhites Titanium Retainers #73-1019

Honda CB750K Bar Harness

Bar Harness

#27-5505

Bar Harness Eliminates Damage To Fairings, Grips & Body Covers Red Heavy Duty Nylon Web 1 3/4" x 37"

Honda CB750K Safety Wire

Safety Wire

#35-0087

Stainless Steel Safety Wire 25 Foot Roll of .032" Dia Wire

Honda CB750K Cylinder Wire Set

Cylinder Wire Set

#23-2901

Cylinder Wire Set Black Gum Rubber - Copper Core 2 Pcs 15" Long 2 Pcs 12" Long

Honda CB750K Cylinder Wire Set

Cylinder Wire Set

#23-2902

Cylinder Wire Set Black Gum Rubber - Copper Core 2 Pcs 20" Long

Honda CB750K Cylinder Wire Set

Cylinder Wire Set

#23-2903

Cylinder Wire Set Black Gum Rubber - Copper Core 3 Pcs 12" Long

Honda CB750K Safety Wire Pliers

Safety Wire Pliers

#35-0122

Safety Wire Pliers Standard Size With Return Spring Mechanism For Easy Wire Twisting

Honda CB750K Dynatek Performance Spark Plug Wire Set

Dynatek Performance Spark Plug Wire Set

#07-9978

Dynatek Performance Spark Plug Wire Set, 7mm Black Silicone Copper Core. 4' Length (cut to your needed length). 2 wires in this set which can be cut into 4. All wires are supplied with finished spark plug boot ends and loose coil terminals to allow the final length to be determined by the user. Wires feature a solid copper core for use on older vehicles where electrical interference is not an issue. High quality made in the USA. Will work with Dyna Style Coils only # 07-9979, 07-9980 or 17-6810.

Honda CB750K Wire Type Hose Clamp Pk/10

Wire Type Hose Clamp Pk/10

#20-4012

Wire Type Hose Clamp Pk/10 3/16" (4mm)

Honda CB750K Wire Type Hose Clamp Pk/10

Wire Type Hose Clamp Pk/10

#20-4014

Wire Type Hose Clamp Pk/10 1/4" (6mm)

Honda CB750K Wire Type Hose Clamp Pk/10

Wire Type Hose Clamp Pk/10

#20-4015

Wire Type Hose Clamp Pk/10 1/2" (13mm)

Honda CB750K Wire Type Hose Clamp Pk/10

Wire Type Hose Clamp Pk/10

#20-4016

Wire Type Hose Clamp Pk/10 5/16" (8mm)

Honda CB750K Wire Type Hose Clamp Pk/10

Wire Type Hose Clamp Pk/10

#20-4017

Wire Type Hose Clamp Pk/10 9mm

Honda CB750K Wire Type Hose Clamp Pk/10

Wire Type Hose Clamp Pk/10

#20-4018

Wire Type Hose Clamp Pk/10 3/8" (10mm)

Honda CB750K Universal Bar Switch Assembly ~ Left (Clutch) Side

Universal Bar Switch Assembly ~ Left (Clutch) Side

#17-6911

Universal Bar Switch Assembly ~ Left (Clutch) Side. Clutch side universal handlebar switch for 7/8" bars. Simple and clean design with the essentials. Includes headlight hi-low, turn signal and horn buttons. Includes 8 female bullet connectors, you may need to adapt the connectors to fit your wire harness.

Honda CB750K Universal Bar Switch Assembly ~ Right (Brake) Side

Universal Bar Switch Assembly ~ Right (Brake) Side

#17-6912

Universal Bar Switch Assembly ~ Right (Brake) Side. Brake side universal handlebar switch for 7/8" bars. Simple and clean design with the essentials. Includes momentary starter, kill and on/off headlight buttons. Includes 9 female bullet connectors, you may need to adapt the connectors to fit your wire harness.

Honda CB750K Coil High Tension Wire Ends (Pk/2)

Coil High Tension Wire Ends (Pk/2)

#17-6831

Coil High Tension lead ends (fit inside coil towers) (Pk/2) Fits: #17-6810 Coil

Honda CB750K Safety Wire Nut & Metric Bolt Drill Jig Kit

Safety Wire Nut & Metric Bolt Drill Jig Kit

#35-0064

Safety Wire Nut & Metric Bolt Drill Jig Kit. Contains one nut drill jig and one metric bolt jig. Jig set designed for accurate drilling of nuts and bolts for use with safety lock wire. Both jigs can be mounted in a vice for drilling. The nut drill jig allows the safety wire holes to be drilled through the head of bolts or through nuts, across the diagonal easily. Accepts up to a 3.5mm diameter. Metric bolt drill jig provides 6 drill holes for metric sizes 6 X 1.0, 8 X 1.0, 8 X 1.25, 10 X 1.25, 10 X 1.5 and 12 X 1.5 bolts.

Honda CB750K Safety Wire Nut & Metric+Imperial Bolt Drill Jig Kit

Safety Wire Nut & Metric+Imperial Bolt Drill Jig Kit

#35-0065

Safety Wire Nut & Metric+Imperial Bolt Drill Jig Kit. Contains one nut drill jig, one metric bolt jig and one imperial bolt jig. Jig set designed for accurate drilling of nuts and bolts for use with safety lock wire. Both jigs can be mounted in a vice for drilling. The nut drill jig allows the safety wire holes to be drilled through the head of bolts or through nuts, across the diagonal easily. Accepts up to a 3.5mm diameter. Metric bolt drill jig provides 6 drill holes for metric sizes 6 X 1.0, 8 X 1.0, 8 X 1.25, 10 X 1.25, 10 X 1.5 and 12 X 1.5 bolts. Imperial bolt drill jig provides 6 drill holes for imperial sizes 1/4"-20, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24 and 7/16"-14 bolts.

Honda CB750K Dynatek Performance High Output 3 Ohm Ignition Coil Set/2 With Plug Wires
USD$ 217.45

Dynatek Performance High Output 3 Ohm Ignition Coil Set/2 With Plug Wires

#07-9974

Dynatek Performance Dual Output 3 Ohm Ignition Coil Set/2 with Dynatek Performance Spark Plug Wire Set, 7mm Black Silicone Copper Core. Includes Hardware and Instructions. Comes with a one year warranty through Dynatek. Wires are 4' Length (cut to your needed length). 2 wires in this set which can be cut into 4. All wires are supplied with finished spark plug boot ends and loose coil terminals to allow the final length to be determined by the user. Wires feature a solid copper core for use on older vehicles where electrical interference is not an issue. High quality made in the USA. These high tech, top quality coils are made in the USA and are designed for maximum performance. They produce spark voltages in excess of 30,000 volts and spark energies second to none. Dyna Coils work with point ignitions, aftermarket electronic ignitions and factory electronic ignitions. Before selecting a coil check the coil primary resistance requirements as specified by the manufacturer of the ignition being used before purchasing. When choosing the right coil for your bike, never select a coil with a lower resistance than your ignition system.

Honda CB750K Custom Chrome Dual Beam Headlights

Custom Chrome Dual Beam Headlights

#09-0087

Custom Chrome 4" Dual Beam Headlight Set. Complete universal side mount dual hi/low beam head light assembly. The two high quality glass sealed beam style lights have H4 60/55 watt bulbs along with pilot running lights in each light. Assembled and pre-wired harness to simply plug into your existing H4 plug. Side mounting bolts hole are threaded for M8 x 1.25 bolts. Total outer width at side mounting bolts in 8 1/2" wide. Center of mounting bolts to rear of the light bucket is 2 5/8" in depth. From the front of the trim ring to the rear of the bucket is about 4 1/2" in depth.

Honda CB750K Custom Matte Black Dual Beam Headlights

Custom Matte Black Dual Beam Headlights

#09-0088

Custom Matte Black 4" Dual Beam Headlight Set. Complete universal side mount dual hi/low beam head light assembly. The two high quality glass sealed beam style lights have H4 60/55 watt bulbs along with pilot running lights in each light. Assembled and pre-wired harness to simply plug into your existing H4 plug. Side mounting bolts hole are threaded for M8 x 1.25 bolts. Total outer width at side mounting bolts in 8 1/2" wide. Center of mounting bolts to rear of the light bucket is 2 5/8" in depth. From the front of the trim ring to the rear of the bucket is about 4 1/2" in depth.

Honda CB750K Tie Down Set

Tie Down Set

#27-5501

Tie Down Set/2 - Red 4000lb Strength 1" Wide x 5 1/2'

Honda CB750K Tie Down Extensions

Tie Down Extensions

#27-5502

Tie Down Extension Set/2 - Red 18"

Honda CB750K Tie Down Set

Tie Down Set

#27-5503

Tie Down Set/2 - Black 4000lb Strength 1" Wide x 5 1/2'

Honda CB750K Tie Down Set
SALE: USD$ 11.95
(USD$ 15.00)

Tie Down Set

#27-5504

Tie Down Set/2 - Blue 4000lb Strength 1" Wide x 5 1/2'

Honda CB750K Chrome Bungee Nut Set/2 ~ 6mm x 1.00mm

Chrome Bungee Nut Set/2 ~ 6mm x 1.00mm

#27-5506

New chrome pair of grooved Bungee Nuts 6mm x 1.00mm. Can work as a tie down knob, spring anchor or a simple way to attach bungee cords or cargo nets.

Honda CB750K Chrome Bungee Nut Set/2 ~ 8mm x 1.25mm
USD$ 7.00
Out of Stock

Chrome Bungee Nut Set/2 ~ 8mm x 1.25mm

#27-5507

New chrome pair of grooved Bungee Nuts 8mm x 1.25mm. Can work as a tie down knob, spring anchor or a simple way to attach bungee cords or cargo nets.

Honda CB750K Chrome Bungee Nut Set/2 ~ 10mm x 1.25mm

Chrome Bungee Nut Set/2 ~ 10mm x 1.25mm

#27-5511

New chrome pair of grooved Bungee Nuts 10mm x 1.25mm. Can work as a tie down knob, spring anchor or a simple way to attach bungee cords or cargo nets.

The names Honda, Yamaha, Kawasaki, Suzuki and any other trade names or symbols belonging to each respective corporation are stated for reference purposes only. The products on this site are after market (not OEM) replacement parts and accessories only. We have no relationship to the listed companies.