HondaCB750K ► 

Refine Search Results
Honda CB750K Air Cut Off Valve
USD$ 17.00
Listed Models

Air Cut Off Valve

#20-4021 | Honda CB750K (1979)

Air Cut Off Valve OEM Ref # 16048-425-671 / 16048-425-305

USD$ 17.00
Listed Models
Honda CB750K Carb Float
USD$ 22.15
Listed Models

Carb Float

#20-6506 | Honda CB750K (1979)

Carb Float with Pin, Replaces OEM # 16013-679-005 Note: Order the Quantity of Floats you Require

USD$ 22.15
Listed Models
Honda CB750K Float Bowl Gasket
USD$ 6.60
Listed Models

Float Bowl Gasket

#20-8031 | Honda CB750K (1979-1982)

Float Bowl Gasket

USD$ 6.60
Listed Models
Honda CB750K Carb Pump Diaphragm
USD$ 17.70
Listed Models

Carb Pump Diaphragm

#20-9042 | Honda CB750K (1979-1982)

Carb Pump Diaphragm OEM Ref # 16021-679-005

USD$ 17.70
Listed Models
Honda CB750K Intake Carb Holder Set
USD$ 81.35
Listed Models

Intake Carb Holder Set

#48-0756 | Honda CB750K (1979-1982)

Intake Carb Holder Set OEM Ref # 16214-425-00 1 Pc, 16213-425-00 1 Pc, 16212-425-00 1 Pc, 16211-425-00 1 Pc NOTE-If you require band clamps, these carb holders require our clamps part #15-0689 X8

USD$ 81.35
Listed Models
Honda CB750K Float Bowl Drain Screw O-Rings Pk/4
USD$ 3.65
Listed Models

Float Bowl Drain Screw O-Rings Pk/4

#48-0792 | Honda CB750K (1977-1982)

Float Bowl Drain Screw O-Rings Pk/4

USD$ 3.65
Listed Models
Honda CB750K Carb Rebuild Kit
USD$ 14.75
Listed Models

Carb Rebuild Kit

#48-1401 | Honda CB750K (1979)

Carb Rebuild Kit Includes Items Pictured High Quality - Made In Japan 1 Kit Needed Per Carb

USD$ 14.75
Listed Models
Honda CB750K Carb Rebuild Kit
USD$ 19.20
Listed Models

Carb Rebuild Kit

#48-1963 | Honda CB750K (1979)

Carb Rebuild Kit Includes Items Pictured High Quality - Made In Japan 1 Kit Needed Per Carb

USD$ 19.20
Listed Models
Honda CB750K Performance Main Jet Kit
USD$ 29.55
Listed Models

Performance Main Jet Kit

#48-2111 | Honda CB750K (1972-1982)

Performance Main Jet Kit. Kit includes a total of 16 Main Jets for Keihin Carbs. Use this jet kit to unleash the extra power you should have from your aftermarket exhaust, flee flowing air filters or any engine mods you have made. Kit includes Main Jets #105 (X4), #110 (X4), #115 (X4) and #120 (X4).

USD$ 29.55
Listed Models
Honda CB750K Ultimate Performance Main Jet Kit
USD$ 48.80
Listed Models

Ultimate Performance Main Jet Kit

#48-2112 | Honda CB750K (1972-1982)

Ultimate Performance Main Jet Kit. Kit includes a total of 44 Main Jets for Keihin Carbs. Use this jet kit to unleash the extra power you should have from your aftermarket exhaust, flee flowing air filters or any engine mods you have made. Kit includes Main Jets #100 (X4), #102 (X4), #105 (X4), #108 (X4), #110 (X4), #112 (X4), #115 (X4), #118 (X4), #120 (X4), #122 (X4) and #125 (X4)

USD$ 48.80
Listed Models
Honda CB750K Rubber Passage Plug
USD$ 6.60
Listed Models

Rubber Passage Plug

#48-5001 | Honda CB750K (1979-1981)

Rubber Passage Plug Pk/5 OEM Ref # 16010-425-671 / 16010-461-781 / 16010-469-004

USD$ 6.60
Listed Models
Honda CB750K Float Needle
USD$ 5.55
Listed Models

Float Needle

#48-5010 | Honda CB750K (1977-1978), CB750K (1979)

Float Needle High Quality - Made In Japan OEM Ref # 16155-382-004 / 16011-393-004 / 16011-KG0-891 / 16030-1007 / 16011-382-004

USD$ 5.55
Listed Models
Honda CB750K Float Bowl Drain Screw
USD$ 4.40
Listed Models

Float Bowl Drain Screw

#48-5042 | Honda CB750K (1977-1982)

Float Bowl Drain Screw w O-Ring. Note: We sell these each, order the quantity you require

USD$ 4.40
Listed Models
Honda CB750K Air Screw Needle O-Ring
USD$ 1.10
Listed Models

Air Screw Needle O-Ring

#48-5043 | Honda CB750K (1971-1982)

Air Screw Needle O-Ring. 2.8mm x 1.2mm. Note: sold each, order the quantity you require

USD$ 1.10
Listed Models
Honda CB750K Float Bowl Screws Pk/2
USD$ 1.45
Listed Models

Float Bowl Screws Pk/2

#48-9031 | Honda CB750K (1979-1982)

Float Bowl Screws with Lock Washers, Pack of 2 Screws and 2 Washers. These fasten the float bowl in place. Replaces OEM # 93892-04016-00 Order Quantity of Screws you Require

USD$ 1.45
Listed Models
Honda CB750K Throttle Cable - Pull
USD$ 12.55
Listed Models

Throttle Cable - Pull

#51-2507 | Honda CB750K (1979)

Throttle Cable "Pull Type" - OEM Ref. # 17910-425-000 / 17910-425-010 Made in Japan

USD$ 12.55
Listed Models
Honda CB750K Throttle Cable - Push
USD$ 14.75
Listed Models

Throttle Cable - Push

#51-2581 | Honda CB750K (1979)

Throttle Cable "Push Type" - OEM Ref. # 17920-425-010 Made in Japan

USD$ 14.75
Listed Models
Honda CB750K Choke Cable
USD$ 14.00
Listed Models

Choke Cable

#51-2603 | Honda CB750K (1979-1982)

Choke Cable - Black - OEM Ref. # 17950-425-000 Made in Japan

USD$ 14.00
Listed Models
Honda CB750K Carburetor Cap Screw Set/8
USD$ 3.65
Listed Models

Carburetor Cap Screw Set/8

#73-0100 | Honda CB750K (1979-1982)

Carburetor Cap Screw Set/8 with Metal Washers.

USD$ 3.65
Listed Models
Honda CB750K Carb Fuel Connector Tube and Accellerator Tube O-Rings
USD$ 9.60
Listed Models

Carb Fuel Connector Tube and Accellerator Tube O-Rings

#73-0831 | Honda CB750K (1979-1982)

Carburetor Fuel Connector Tube and Accellerator Tube O-Rings, 12 O-Rings.

USD$ 9.60
Listed Models
Honda CB750K Carburetor Needle Jet Holder
USD$ 13.30
Listed Models
Out of Stock
Email Me When Available

Carburetor Needle Jet Holder

#73-0952 | Honda CB750K (1979-1982)

Carburetor Needle Jet Holder, Replaces OEM # 16165-422-004 Note: Sold Each

USD$ 13.30
Listed Models
Out of Stock
Email Me When Available
Honda CB750K Press In Type Pilot Jet Set ~ Size #35 (Pk/4)
USD$ 9.60
Listed Models

Press In Type Pilot Jet Set ~ Size #35 (Pk/4)

#73-1001 | Honda CB750K (1979-1981)

Press In Type Pilot Jet Set of 4 (Size #35) Pilot Jets (your idle and low speed operation) are critical for smooth idling and lower rpm driving. When rebuilding carbs it is highly recommended to replace these pilot jets to ensure your bike is running as well as possible. Also, when installing new exhaust or high flow air filters it is recommended to increase the size of your Pilot Jets. These are size #35 which is the stock size for these bikes, please confirm this is the size you require before purchasing. If you require oversize pilot jets we carry those as well.

USD$ 9.60
Listed Models
Honda CB750K Press In Type Pilot Jet Set ~ Size #38 (Pk/4)
USD$ 9.60
Listed Models

Press In Type Pilot Jet Set ~ Size #38 (Pk/4)

#73-1002 | Honda CB750K (1979-1981)

Press In Type Pilot Jet Set of 4 (Size #38) Pilot Jets (your idle and low speed operation) are critical for smooth idling and lower rpm driving. When rebuilding carbs it is highly recommended to replace these pilot jets to ensure your bike is running as well as possible. Also, when installing new exhaust or high flow air filters it is recommended to increase the size of your Pilot Jets. These are size #38 which is oversize for these bikes, please confirm this is the size you require before purchasing.

USD$ 9.60
Listed Models
Honda CB750K Press In Type Pilot Jet Set ~ Size #42 (Pk/4)
USD$ 9.60
Listed Models

Press In Type Pilot Jet Set ~ Size #42 (Pk/4)

#73-1003 | Honda CB750K (1979-1981)

Press In Type Pilot Jet Set of 4 (Size #42) Pilot Jets (your idle and low speed operation) are critical for smooth idling and lower rpm driving. When rebuilding carbs it is highly recommended to replace these pilot jets to ensure your bike is running as well as possible. Also, when installing new exhaust or high flow air filters it is recommended to increase the size of your Pilot Jets. These are size #42 which is the oversize for these bikes, please confirm this is the size you require before purchasing.

USD$ 9.60
Listed Models
Honda CB750K Idle Slow Circuit Nozzle (Pk/4)
USD$ 19.20
Listed Models

Idle Slow Circuit Nozzle (Pk/4)

#73-1005 | Honda CB750K (1979-1982)

Idle Slow Circuit Nozzle (Pk/4), Replaces OEM # 16166-425-671

USD$ 19.20
Listed Models
Honda CB750K Carb Bolt Kit
USD$ 17.00
Listed Models

Carb Bolt Kit

#73-1044 | Honda CB750K (1979-1982)

Carburetor Bolt and Washer 43 Piece Kit. This is a Complete Bolt Kit for All 4 Carburetors.

USD$ 17.00
Listed Models
Honda CB750K Gear Clamp 40-60mm.
USD$ 3.65

Gear Clamp 40-60mm.

#15-0670

Universal Gear Clamp for Carb Holders or Air Boxes. 9mm Wide. Adjusts with a screwdriver. Fits: Diameters 40-60mm (With a width of 9mm)

USD$ 3.65
Honda CB750K Universal Band Clamp
USD$ 3.35

Universal Band Clamp

#15-0672

Universal Band Clamp for Carb Holders or Air Boxes Fits: Diameters 53-56mm. (1.92" - 2.16")

USD$ 3.35
Honda CB750K Universal Band Clamp
USD$ 3.35

Universal Band Clamp

#15-0673

Universal Band Clamp for Carb Holders or Air Boxes Fits: Diameters 60mm-65mm or 2.36" to 2.56"

USD$ 3.35
Honda CB750K Universal Band Clamp
USD$ 3.35

Universal Band Clamp

#15-0684

Universal Band Clamp for Carb Holders or Air Boxes Fits: Diameters 41-44mm. (1.53" - 1.69")

USD$ 3.35
Honda CB750K Universal Band Clamp
USD$ 3.35

Universal Band Clamp

#15-0685

Universal Band Clamp for Carb Holders or Air Boxes Fits: Diameters 46-49mm. (1.77" - 1.92")

USD$ 3.35
Honda CB750K Universal Band Clamp
USD$ 3.35

Universal Band Clamp

#15-0686

Universal Band Clamp for Carb Holders or Air Boxes Fits: Diameters 66-69mm. (2.48" - 2.63")

USD$ 3.35
Honda CB750K Universal Band Clamp
USD$ 3.35

Universal Band Clamp

#15-0687

Universal Band Clamp for Carb Holders or Air Boxes Fits: Diameters 69-72mm. (2.67" - 2.87")

USD$ 3.35
Honda CB750K Band Clamp 45-47mm.
USD$ 3.35

Band Clamp 45-47mm.

#15-0688

Universal Band Clamp for Carb Holders or Air Boxes Fits: Diameters 45-47mm.

USD$ 3.35
Honda CB750K Band Clamp 50-52mm.
USD$ 3.35

Band Clamp 50-52mm.

#15-0689

Universal Band Clamp for Carb Holders or Air Boxes Fits: Diameters 50-52mm.

USD$ 3.35
Honda CB750K Band Clamp 58-60mm.
USD$ 3.35

Band Clamp 58-60mm.

#15-0690

Universal Band Clamp for Carb Holders or Air Boxes Fits: Diameters 58-60mm.

USD$ 3.35
Honda CB750K Band Clamp 43-49mm
USD$ 1.50
Out of Stock
Email Me When Available

Band Clamp 43-49mm

#15-0691

Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds to Filter Joints and all purpose uses except carb holders. Fits: 43-49mm. (1.69"-1.93") Diameters

USD$ 1.50
Out of Stock
Email Me When Available
Honda CB750K Band Clamp 67mm-73mm
USD$ 1.50

Band Clamp 67mm-73mm

#15-0693

Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds to Filter Joints and all purpose uses except carb holders. Fits: 67-73mm. (2.64"-2.87") Diameters

USD$ 1.50
Honda CB750K Band Clamp 73mm-79mm
USD$ 0.75

Band Clamp 73mm-79mm

#15-0694

Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds to Filter Joints and all purpose uses except carb holders. Fits: 73-79mm. (2.87"-3.11") Diameters

USD$ 0.75
Honda CB750K Band Clamp 79-85mm
USD$ 0.75

Band Clamp 79-85mm

#15-0695

Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifold to Filter Joints and all purpose uses except carb holders. Fits: 79-85mm. (3.11"-3.35") Diameters

USD$ 0.75
Honda CB750K Band Clamp 85-91mm
USD$ 0.75

Band Clamp 85-91mm

#15-0696

Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds to Filter Joints and all purpose uses except carb holders. Fits: 85-91mm. (3.35"-3.58") Diameters

USD$ 0.75
Honda CB750K Band Clamp 91-97mm
USD$ 0.75

Band Clamp 91-97mm

#15-0697

Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds to Filter Joints and all purpose uses except carb holders. Fits: 91-97mm (3.58"-3.82") Diameters

USD$ 0.75
Honda CB750K Band Clamp 97mm-103mm
USD$ 0.75

Band Clamp 97mm-103mm

#15-0698

Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds to Filter Joints and all purpose uses except carb holders. Fits: 97-103mm (3.82"-4.00") Diameters

USD$ 0.75
Honda CB750K Band Clamp 103mm-109mm
USD$ 0.75

Band Clamp 103mm-109mm

#15-0699

Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds to Filter Joints and all purpose uses except carb holders. Fits: 103-109mm (4.00"-4.29") Diameters

USD$ 0.75
Honda CB750K Band Clamp 109mm-115mm
USD$ 0.75

Band Clamp 109mm-115mm

#15-0700

Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds to Filter Joints and all purpose uses except carb holders. Fits: 109-115mm (4.29"-4.53") Diameters

USD$ 0.75
Honda CB750K Band Clamp 115mm-121mm
USD$ 0.75

Band Clamp 115mm-121mm

#15-0701

Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds to Filter Joints and all purpose uses except carb holders. Fits: 115-121mm. (4.53"-4.76") Diameters

USD$ 0.75
Honda CB750K Band Clamp 121mm-127mm
USD$ 0.75

Band Clamp 121mm-127mm

#15-0702

Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds to Filter Joints and all purpose uses except carb holders. Fits: 121-127mm. (4.76"-5.00") Diameters

USD$ 0.75
Honda CB750K Band Clamp 37-43mm
USD$ 1.50

Band Clamp 37-43mm

#15-0703

Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifold to Filter Joints and all purpose uses except carb holders. Fits: 37-43mm. (1.45"-1.69") Diameters

USD$ 1.50
Honda CB750K Band Clamp 78-80mm
USD$ 3.35

Band Clamp 78-80mm

#15-2031

Universal Band Clamp for Carb Holders or Air Boxes Fits: Diameters 78-80mm.

USD$ 3.35
Honda CB750K Carb Float Level Gauge
USD$ 14.75

Carb Float Level Gauge

#35-0043

Carburetor Float Level Gauge. Used to measure the float height between the float and carburetor gasket surface. It is important to make sure the float height is correct to factory spec when tuning your engine. Too little or too much fuel in the float bowl will negatively affect tuning results. Adjustable to fit most carburetors. Adjustable Width: 16-78mm and Adjustable Height 0-40mm

USD$ 14.75
The names Honda, Yamaha, Kawasaki, Suzuki and any other trade names or symbols belonging to each respective corporation are stated for reference purposes only. The products on this site are after market (not OEM) replacement parts and accessories only. We have no relationship to the listed companies.