Honda ► CB750K ►
-
Here’s our hand-picked list of parts and accessories for your Honda CB750K with universal parts included►
- Honda
Passenger Rear Footrest Rubber Set
Passenger Rear Footrest Rubber Set/2, Replaces OEM # 95011-31000
Front Fork Top Bridge / Triple Tree Washer Kit
Front Fork Top Bridge / Triple Tree Washer Kit of 2 Washers. These washers are needed in order to avoid broken top triple trees when you tighten up your fork tube clamps. Replace # OEM 53235-300-000
Front Brake Caliper Shaft Boots Pk/4
Front Brake Caliper Shaft Boots Pk/4, These are the Rubber Covers that Attach to the Front Brake Caliper. Replaces OEM # 45133-413-003
Center Stand Spring Plate
Center Stand Spring Plate, This is the Plate the Center Stand Spring Attaches to. Replaces OEM # 50523-300-010
Center Stand Spring Plate
Center Stand Spring Plate, This is the Plate the Center Stand Spring Attaches to. Replaces OEM # 50523-425-000
Side Stand Pivot Bolt & Nut Set
Side Stand Pivot Bolt & Nut Set, This is the Set Used to Fasten the Side Stand in Place. Replaces OEM # 90108-283-000 (Bolt) and 94002-10000-0S (Nut).
Left Side Footrest Return Spring
Left Side Footrest Return Spring. This is the Spring that Allows the Left Side Footpeg to be Lowered and Raised. Replaces OEM # 50644-300-670
Side Cover Hook Rubber
Side Cover Hook Rubber Used to hold the Side Cover in place. Replaces OEM # 83601-425-870
Battery Box Rubber Set
Battery Box Rubber Set. Includes Battery Rubber X1, Battery Box Collar X1, Bolt X1 and Washer X1. This set fastens into the top section of the Battery Box. Fits: Honda CB750K (1969-76) - 4 Sets Used Per Bike, CB750K (1977-78) - 3 Sets Used Per Bike, CB750F (1975-76) Supersport - 4 Sets Used Per Bike, CB750F (1977-78) Supersport - 3 Sets Used Per Bike, CB750A (1976-78) Hondamatic - 2 Sets Used Per Bike Note: Order the Quantity of Sets you Require
Battery Box Rubber "A"
Battery Box Rubber "A", Replaces OEM # 50323-300-010 This rubber is fastened into the top section of the Battery Box. Fits: Honda CB750K (1969-76) - 4 Used Per Bike, CB750K (1977-78) - 3 Used Per Bike, CB750F (1975-76) Supersport - 4 Used Per Bike, CB750F (1977-78) Supersport - 3 Used Per Bike, CB750A (1976-78) Hondamatic - 2 Used Per Bike Note: Order the Quantity of Rubbers you Require
Footrest Rubbers
Footrest Rubbers (Set/2) - OEM Ref # 50661-425-670
Footrest Rubbers
Footrest Rubbers (Set/2) - OEM Ref # 50661-405-000
Side Cover Emblem Fixing Nut Pk/2
Side Cover Emblem Fixing Nut (3mm) Pk/2, Used to Attach the Side Cover Emblems. Replaces OEM # 90313-567-000 Check your bike to see the quantity you require
Passenger Rear Footpeg Pin & Cotter Pin Set
Passenger Rear Footpeg Pin & Cotter Pin Set. Set Includes 2 Footpeg Pins and 2 Cotter Pins. Replaces OEM # 95015-83000
Seat Hinge Pin
Seat Hinge Pin, Replaces OEM # 77203-405-000 Note: 2 Used Per Bike, Order the Quantity you Require
Seat Hinge Pin with Hardware
Seat Hinge Pin and Hardware Set, Includes 1 Pin, 1 Washer and 1 Attachment Clip. Note: Set Includes Enough for One Hinge, Order the Quantity of Sets you Require
Seat Hinge Set
Seat Hinge Set, This set is a reproduction of the original hinges no longer available from Honda. Set includes Hinge A, Hinge B, 2 Long Pins, 2 Attachment Lock Pins and 2 Washers.
Right Side Footrest Return Spring
Right Side Footrest Return Spring. This is the Spring that Allows the Right Side Footpeg to be Lowered and Raised. Replaces OEM # 50617-300-670
Front Fender Hardware/ Fender Stay Hardware Set
3 PC. Front Fender Hardware/ Fender Stay Hardware Set. Includes Setting Rubber, Bolt and Metal Collar. Replaces OEM # 40513-310-000 (Rubber), OEM # 40514-310-000 (Metal Collar) and OEM # 92101-06022-0A (Bolt). Purchase the Quantity of Sets you Require for your Application
Front Fender Hardware/ Fender Stay Hardware Set
3 PC. Front Fender Hardware/ Fender Stay Hardware Set. Includes Setting Rubber, Bolt and Metal Collar. Replaces OEM#40513-310-000 (Rubber), OEM#40514-310-000 (Metal Collar) and OEM#92101-06020-0A (Bolt). Purchase the Quantity of Sets you Require for your Application
Side Stand Rubber Hardware Set
Side Stand Rubber Hardware Set, Includes Metal Collar, Bolt and Washer.
Side Stand Rubber Hardware Set
Side Stand Rubber Hardware Set, Includes Metal Collar and Silver Colored Flange Bolt.
Battery Box Rubber "B"
Battery Box Rubber "B", Replaces OEM # 50327-300-000 Sold Each, Order the Quantity you Require
Rear Wheel Damper Rubber
Rear Wheel Drive Damper Rubber, Replaces OEM # 41241-300-050 These fit between the rear wheel sprocket hub and the wheel hub and get worn down over time from use. Note: 4 Used Per Bike, Order The Quantity you Require
Seat Lock Bar Assembly
Seat Lock Bar Assembly, Replaces OEM# 77220-340-003 / 77220-340-011
Seat Cover
Replacement Seat Cover with Reinforced Passenger Strap (No chrome trim or hardware included just re-use existing hardware). There is NO HONDA LOGO ON THE REAR. There is a layer of foam sewn into the top of the seat cover to improve ride comfort and smooth out any defects in your seat foam. Each seat cover is made entirely by hand, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Comes with complete installation instructions as well as step by step instructions on how to repair damaged seat foam. Fits: the Original Stock Honda CB750K (1972-76) Seat Only This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
Seat Cover
Replacement Seat Cover with Reinforced Passenger Strap (No hardware or chrome trim included just re-use existing hardware). There is not a "Honda" stencil on the rear of the cover due to copyright. There is a layer of foam sewn into the top of the seat cover to improve ride comfort and smooth out any defects in your seat foam. Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Comes with complete installation instructions as well as step by step instructions on how to repair damaged seat foam. Fits: the Original Stock Honda CB750K (1978) Seat Only This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
Seat Cover
Replacement Seat Cover (No hardware or chrome trim included just re-use existing hardware). There is not a "Honda" stencil on the rear of the cover due to copyright. There is a layer of foam sewn into the top of the seat cover to improve ride comfort and smooth out any defects in your seat foam. Each seat cover is made entirely by hand, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Comes with complete installation instructions as well as step by step instructions on how to repair damaged seat foam. Fits: the Original Stock Honda CB750K (1980-82) Seat Only This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
CB Chrome Mirror - Early Stock Type
CB750 Eary Stock Type Chrome Mirror - 4" Diameter Mirror, 8" Stem, 10mm. RH Thread. Replaces OEM # 88110-300-000 Note: These Fit Both Left And Right Side Of Bike, Order 2 For A Complete Set
Passenger Rear Footrest Rubber Set
Passenger Rear Footrest Rubber Set/2, Replaces OEM # 50710-405-000
Rear Fender Eliminator
Rear Fender Eliminator. Includes holes for custom tail light and license plate install. These are Great for Cafe builds and custom work! If you want a Licence Plate Frame to go with this, Our #73-0087 or 73-0088 fit perfectly, Tailllight #11-2325
Chrome Stock Type Front Fender
Chrome Stock Type Front Fender, Replaces OEM # 61100-341-700XW Includes the chrome support struts, bracket for the speedo cable and the bracket to hold the brake hose in place.
Chrome Stock Type Rear Fender
Chrome Stock Type Rear Fender, Replaces OEM # 80100-341-000
Black Stock Type Front Fender
Black Stock Type Front Fender, Replaces OEM # 61100-341-700XW Includes the support struts, bracket for the speedo cable and the bracket to hold the brake hose in place. Fits: Honda CB750K (1972) - Frame # 2093731 and Higher, CB750K (1973-75), CB750K (1976) - Frame # 2540001 to 2575894 CB550K (1974-76)
Black Stock Type Rear Fender
Black Stock Type Rear Fender, Replaces OEM # 80100-341-000
TC Bros. Forward Controls Kit
TC Bros. Brand Bolt-On Forward Controls Kit. Kit includes a pair of forward controls featuring CNC machined, knurled aluminum pegs. The mounting plates are heavy duty powder coated steel and bolt on in place of your front motor mount on one side and u-bolt to your frame on the other side. The spacers are TIG welded to the mounting plates. Everything bolts on using your stock mounting hardware and with no frame modifications. The only welding required is a tab that is welded to your stock brake pedal in order to attach the linkage rods. It is easily done and mounting instructions with pictures are included with each kit. This kit makes long trips much more comfortable due to the fact that your legs are extended forward rather than bent. Great for choppers, bobbers, or even stock bikes. High Quality, Made in the USA. Linkage Kit Not Included
TC Bros. Forward Controls Kit
TC Bros. Brand Bolt-On Forward Controls Kit. Kit includes a pair of forward controls featuring CNC machined, knurled aluminum pegs. The mounting plates are heavy duty powder coated steel and bolt to your front motor mounts. The spacers are TIG welded to the mounting plates. Everything bolts on using the supplied mounting hardware with no frame modifications. Mounting instructions with pictures are included with each kit. This kit makes long trips much more comfortable due to the fact that your legs are extended forward rather than bent. Great for choppers, bobbers, or even stock bikes. High Quality, Made in the USA. Linkage Kit Not Included, We Sell that part #73-1164
Pilot Indicator Light Cover
Pilot Indicator Light Cover, Replaces OEM# 37600-377-018 This includes the front and rear cover with fastening screws.
Side Cover Emblem
Side Cover Emblem, Replaces OEM# 87127-425-670 Sold Each, Order the Quantity you Require
Side Cover Emblem
Side Cover Emblem, Replaces OEM# 87123-405-000 Note- The CB750K 1978 Used 2 Different Styles of Emblems. These will work on all CB750K 1978's. Sold Each, Order the Quantity you Require
Headlight Reflector Rubber Base
Headlight Reflector Rubber Base, Replaces OEM# 33743-425-600 This is the rubber base that the headlight reflector attaches to. Sold Each, order the quantity you require
Mounting Clamp ~ Black
Black Speedo/Tach/Mirror Mounting Clamp 2 Piece Die-Cast Alloy Clamp With 10mm RH Thread Fits 7/8" Bars
Viper Cafe Fairing
Universal Gloss Black Viper Cafe Racer Fairing with Smoked Windshield. Designed to protect the rider from wind pressure and debris. Mounting hardware included. Fits: Bikes With 7" or Smaller Headlights
Custom Grey Windshield
Custom Grey Acrylic Windshield. Includes 2 fully adjustable 7/8" clamps attached to the windshield which can be adjusted in just about any angle and direction for an easy install. Width 18.3", Height 22"
Custom Clear Windshield
Custom Clear Acrylic Windshield. Includes 2 fully adjustable 7/8" clamps attached to the windshield which can be adjusted in just about any angle and direction for an easy install. Width 18.3", Height 22"
Custom Grey Windshield
Custom Grey Acrylic Windshield. Includes 2 fully adjustable 7/8" clamps attached to the windshield which can be adjusted in just about any angle and direction for an easy install. Width 16.25", Height 18"
Custom Clear Windshield
Custom Clear Acrylic Windshield. Includes 2 fully adjustable 7/8" clamps attached to the windshield which can be adjusted in just about any angle and direction for an easy install. Width 16.25", Height 18"
Venom Cafe Racer Fairing
Universal Gloss Black Venom Cafe Racer Fairing with Smoked Windshield. Designed to protect the rider from wind pressure and debris. Mounts by using the side bolts of your headlight. Fits: Bikes With 7" or Smaller Headlights