Honda ► CB750K ►
-
Here’s our hand-picked list of electrical parts for your Honda CB750K with universal parts included►
- Honda
Starter Clutch Diode
Starter Clutch Diode OEM Ref # 31700-124-003 / 31700-166-008
Starter Motor
Rick's Electrics Starter Motor, Replaces OEM# 31200-300-030 This starter motor features an upgraded 4-Brush permanent magnet design & comes with the battery cable.
Rotor Brush Plate Holder
Rotor Brush Plate Holder for Alternators, Replaces OEM# 31126-422-015 / 31126-422-005.
Rectifier/Regulator
Rick's Electric Brand OEM Style Honda Rectifier-Regulator: This is a combination unit which will replace the OEM regulator and rectifier; stock type plugs and installation instructions are included. Dimensions 68mm Length, 94mm Width, 26mm Height, Hole Distance 80.0mm Center to Center. High quality Part. Note: May require a custom mounting job. Works great if attached with one bolt and nut where the safety starter switch was originally located (can bypass that switch).
Premium Stock Type Stator
Premium Made in the USA ~ Rick's Electrics ~ Stock Style Stator, Replaces OEM # 31102-300-045 / 31102-300-035 / 31102-393-025 / 31102-393-005 / 31102-393-015.
Honda CB Charging Rotor
Honda CB Charging Rotor, Replaces OEM # 31110-426-832 This rotor is a high quality OEM style replacement for Honda field coil rotors. The field coil is wound to stock specifications. This rotor is an easy installation and provides years of trouble free reliability from your Honda engine. Easy bolt-in installation just like the stock rotor.
Sub-Wire Harness "A"
Sub-Wire Harness "A", Replaces OEM # 32103-438-660 Plugs into the main wire harness and connects to the ignition coils. This item is not included with our main wire harness's. Please order this item if you require this sub-wire harness "A".
Horn Sub Harness "A"
Horn Sub Harness "A", This is the Harness that Attaches to the Horn. Replaces OEM # 32101-438-000
Oil Pressure Switch Wire Assembly
Oil Pressure Switch Wire Assembly. Includes the Wire and Rubber Cover. Replaces OEM # 31270-300-154 / 31270-300-005
Alternator Stator Wire Harness
Alternator Stator Wire Harness, This Harness has the Same 7 Wire Plug as the OEM part and Hooks up Without Alterations. Replaces OEM # 31110-300-154
Rectifier/Regulator ~ Lithium Ion Battery Compatible
Rick's Electric Brand Lithium Ion Battery Compatible Rectifier-Regulator. Designed with a lower voltage set point to work with lithium ion batteries only. This is a combination unit which will replace the OEM regulator and rectifier; plug and play easy install plugs. Replaces OEM# 31600-MA6-910, 316-MA6-000, 311600-MA7-008, 31600-425-008, 31600-461-771, 311600-MG5-000. This is Not for use with standard lead acid batteries. The voltage set point is 14V +/- .2. Please ensure this set point is correct for your battery before attempting installation.
Rick's Electrics Brand ~ Ignition Coil
Rick's Electrics Brand Replacement Ignition Coil - OEM Ref# 21121-1310, 21121-1039 , 21121-1309,21121-1038 , 21121-1041 , 21121-1036 , 21121-1035 , 21121-1110 , 21121-1111 , 30510-MA6-013 , 30510-MA6-003 , 30510-MR7-003 , 30500-422-013 , 30500-422-003 , 30505-MB9-003. Note: 2 Coils Used per Bike, Order the Quantity you Require Note: Comes with Wires Attached
Rear Brake Light Stop Switch Spring
Rear Brake Light Stop Switch Spring. This is the Spring that Attaches to the Rear Stop Light Switch. Replaces OEM # 35357-300-000
Headlight Adjusting Screw & Spring Set
Headlight Adjusting Screw & Spring Set. Each Set Includes One Screw and One Spring. Replaces OEM # 33103-346-670 (Screw) and OEM # 33107-300-003 (Spring)
Starter Motor Bolt (Set/2)
Starter Motor Flange Bolt Set/2. Replaces OEM # 95700-06056-00
Hydraulic Brake Light Switch
Hydraulic Brake Light Switch - OEM Ref # 35350-300-006 / 35350-300-016 / 341-83980-30-00 10mm x M1.25 thread
Tail Light Mounting Hardware Set
Tail Light Mounting Hardware Set. This Set is Used to Mount the Tail Light Bracket. This 12pc Set Includes 4pc Tail Light Setting Bolts, 4pc Tail Light Setting Washer and 4pc Rubber Fender Cushion.
Tail Light Mounting Hardware Set
Tail Light Mounting Hardware Set (8 Pc. Set). This set is used to mount your tail Light to the tail Light bracket. Each set Includes 2X Rubber Grommets, 2X Collars, 2X Bolts and 2X Washers.
Lever Safety Stop Switch
Front Clutch Lever Safety Stop Switch, Replaces OEM # 35330-413-003 This is the switch that allows the bike to start when the clutch lever is depressed.
Ignition Switch Nut Tool
Ignition Switch Nut Tool, used to loosen and tighten the igntion switch nut properly without causing any damage to the switch.
Rear Signal Lamp Stay Screw Set/2
Rear Signal Lamp Stay Screw Set/2. This Set Includes the Screw that Fastens the Rear Signal Lamp Stays to the Rear Turn Signal Mount & Collars (#73-0127). Set includes 2 screws to fasten both rear signal stays
Front Signal Lamp Stay Nut & Washer Set
Front Signal Lamp Stay Nut & Washer Set. These are the Nuts and Washers that thread into the Front Turn Signal Stays. Set includes 2 Nuts and 2 Washers, Enough for both Front Signal Stays.
Lens Screw
Tail Light Lens Screws, Pack of 10. Replaces OEM # 93500-04050-4J ISO Std. Pitch - Steel Plated Size: 4 x 50mm
Lens Screw
Tail Light Lens Screws, Pack of 10 Screws. Replaces OEM # 93500-04055-4J ISO Std. Pitch - Steel Plated Size: 4 x 55mm
NGK Spark Plug
NGK D8EA Spark Plug - Standard Original CB750 Spark Plug 4 required per CB750, Order the quantity you require.
NGK Iridium Spark Plug
NGK DR8EIX Iridium Spark Plug Cheapest Horsepower You Can Buy for your CB! Adds a Solid 1-2 HP to your Bike! 4 required per bike, Order the Quantity you require.
Stock Type Ignition Coil Set/2 With Brackets
Stock Type Ignition Coil Set/2 With Brackets. Replaces OEM# 30500-300-013 Dual Coil Assembly Pre-Mounted on their Brackets Just Like the Stock Type. Plug and Play Easy Install. Primary 4.3 Ohm, Secondary 15,000k Ohms.
Tail Light Cable Set
Tail Light/Brake Light Cable Set of 3. Replaces OEM # 33711-323-000 (Tail Light Sub Cable), OEM # 33712-300-003 (Taillight Ground Cable) and OEM # 33713-323-000 (Stop Light Sub Cable).
Starter Motor Terminal Rubber Boot
Starter Motor Terminal (Cover) Rubber Boot. Replaces OEM # 32411-230-000
Positive (+) Battery Cable
Positive (+) Battery Cable with Rubber End Covers. Replaces OEM # 32401-392-000
Starter Relay Solenoid Cable
Starter Relay Solenoid Cable, Replaces OEM # 35858-392-000 / 35858-333-000 / 35858-393-000
Positive (+) Battery Cable
Positive (+) Battery Cable with Rubber End Covers. Replaces OEM # 32401-425-010
Negative (-) Battery Cable
Negative (-) Battery Cable (Ground Cable). Replaces OEM # 32601-MA3-840
Horn Sub Harness
Horn Sub Harness, This is the Harness that Attaches to the Horn. Replaces OEM # 38105-369-000
Starter Motor Cable
Starter Motor Cable, Replaces OEM # 32402-425-000
Headlight Plug ~ OEM Style
Headlight Plug ~ OEM Style, Replaces OEM # 33130-300-003
Negative (-) Battery Cable
Negative (-) Battery Cable (Ground Cable). Replaces OEM # 32601-392-000
Fuse Box Assembly
Fuse Box Assembly Complete with 15Amp Fuses, Replaces OEM # 38200-MF9-405