Honda ► CB750K ►
-
Here’s our hand-picked list of parts and accessories for your Honda CB750K with universal parts included that match “honda sl125”►
- Honda
Stock Type Mirror Set
Stock Type Mirror Set/2, Replaces OEM# 88110-329-730 / 88110-074-000 / 88120-329-730 / 88120-074-000 Chrome Mirrors, 8" Stem Length
Front Fork Top Bridge / Triple Tree Washer Kit
Front Fork Top Bridge / Triple Tree Washer Kit of 2 Washers. These washers are needed in order to avoid broken top triple trees when you tighten up your fork tube clamps. Replace # OEM 53235-300-000
Sidecover Damper Rubber A
Rubber Sidecover Damper A, Replaces OEM # 17247-303-000
Side Cover Emblem Attachment Nut
Side Cover Emblem Attachment Nut, Replaces OEM# 90315-504-000 Sold Each, Order the Quantity you Require
Seat Rubber "B"
Seat Setting Rubber "B". This is one of the Rubber Settings Under the Seat. Replace those old worn Rubbers with a brand new one! Replaces OEM # 77205-286-000 Order the Quantity of Seat Rubber "B" your Bike Requires
Replacement Mirror
Replacement Mirror - Fits Right Or Left Honda LTD 8" Stem, 10mm Thread, Chrome Plated
CB Black Mirror - Original Type - DOHC
Mirror - Honda Black Type - 8" Stem, 10mm. RH threads. Original Stock Type For: Honda CB750K (1979-82), CB750F (1979-82) Supersport, CB750L (1979) Limited, CB900F (1981-82) Supersport, GL1100 (1981-83) Will also fit Any Honda: CB Note: These Fit Both Left And Right Side Of Bike, Order 2 For A Complete Set
Side Cover Emblem Set 1969-70K ~ Gold
Side Cover Emblem Set, Gold Honda Wing Emblems with Silver Background. Includes Both Left and Right Side Cover Emblems (Clips Not Included). Replaces OEM # 87123-300-020 and 87124-300-020 Fits: Honda CB750K (1969-70) Attachment Clips Sold Separate #73-0944
Side Cover Emblem Set 1969-70K ~ Black
Side Cover Emblem Set, Black Honda Wing Emblems with Silver Background. Includes Both Left and Right Side Cover Emblems (Clips Not Included). Replaces OEM # 87123-300-020 and 87124-300-020 Fits: Honda CB750K (1969-70) Attachment Clips Sold Separate #73-0944
Chrome LTD Type Mirror ~ Short 5" Stem
Mirror - Honda Chrome Ltd. Type - 5" Short Stem, 10mm. RH threads. Note: These Fit Both Left or Right Side Of Bike, Order 2 For A Complete Set
Side Cover Emblem Set 1971-76K ~ Orange
Side Cover Emblem Set, Orange Honda Wing Emblems. Includes Both Left and Right Side Cover Emblems and Attachment Clips. Replaces OEM # 87126-341-000 and 87127-341-000
Side Cover Emblem Set 1971-76K ~ Red
Side Cover Emblem Set, Red Honda Wing Emblems. Includes Both Left and Right Side Cover Emblems and Attachment Clips. Replaces OEM # 87126-300-405 and 87127-300-405
Seat Hinge Set
Seat Hinge Set, This set is a reproduction of the original hinges no longer available from Honda. Set includes Hinge A, Hinge B, 2 Long Pins, 2 Attachment Lock Pins and 2 Washers.
Chrome Side Grab Bar
Chrome Side Grab Bar, Replaces OEM # 50316-300-030 Replace that old worn out grab bar with a new one to add to the look of your bike! Some people put these on both sides. Fits: Honda CB750K (1969-71), CB750K (1972-76) * fits if you don't have the Full Grab Rail installed * Fits: Honda CB400F (1975-77) Supersport * Fits without any modifications but has a slightly different angle then the stock type *
Gas Tank Emblem
Gas Tank Emblem, Replaces OEM# 87122-300-020 / 87121-300-020 Fits: Honda CB750K (1969) CB750K (1970) - Frame Number 1044649 and lower Sold Each, Order the Quantity you Require
Side Cover Emblem
Plastic Side Cover Emblem with 2 Attachment Clips. Replaces OEM # 87123-300-030 This is a Stock Type Replacement Emblem for the Honda CB750K (1971-72) Side Covers. Note: 2 Emblems Used Per Bike, Order the Quantity you Require
Side Cover Emblem
Plastic Side Cover Emblem with 3 Attachment Clips. Replaces OEM # 87123-341-673 This is a Stock Type Replacement Emblem for the Honda CB750K (1973-76) Side Covers Note: 2 Emblems Used Per Bike, Order the Quantity you Require
CB Black Mirror - Early Stock Type
CB750 Eary Stock Type Black Mirror - 4" Diameter Mirror, 8" Stem, 10mm. RH Thread. Replaces OEM # 88110-300-000 Original Stock Type For: Honda CB750K (1969-70), Note: These Fit Both Left And Right Side Of Bike, Order 2 For A Complete Set
Black Stock Type Front Fender
Black Stock Type Front Fender, Replaces OEM # 61100-341-700XW Includes the support struts, bracket for the speedo cable and the bracket to hold the brake hose in place. Fits: Honda CB750K (1972) - Frame # 2093731 and Higher, CB750K (1973-75), CB750K (1976) - Frame # 2540001 to 2575894 CB550K (1974-76)
Seat Cover
Replacement Seat Cover with Reinforced Passenger Strap (No trim or hardware included just re-use existing hardware). There is not a "Honda" stencil on the rear of the cover due to copyright. There is a layer of foam sewn into the top of the seat cover to improve ride comfort and smooth out any defects in your seat foam. Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Comes with complete installation instructions as well as step by step instructions on how to repair damaged seat foam. Fits: the Original Stock Honda CB750K (1969-70) WITH THE DUCK TAIL STYLE SEAT ONLY. If you have a CB750K 1970 see our listing below to compare the regular style to the duck style to ensure you are ordering the correct cover. The duck tail has a raised end and also has a different stitching pattern as shown. This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
Seat Cover
Replacement Seat Cover with Reinforced Passenger Strap (No chrome trim or hardware included just re-use existing hardware). There is NO HONDA LOGO ON THE REAR. There is a layer of foam sewn into the top of the seat cover to improve ride comfort and smooth out any defects in your seat foam. Each seat cover is made entirely by hand, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Comes with complete installation instructions as well as step by step instructions on how to repair damaged seat foam. Fits: the Original Stock Honda CB750K (1972-76) Seat Only This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
Seat Cover
Replacement Seat Cover with Reinforced Passenger Strap (No hardware or chrome trim included just re-use existing hardware). There is not a "Honda" stencil on the rear of the cover due to copyright. There is a layer of foam sewn into the top of the seat cover to improve ride comfort and smooth out any defects in your seat foam. Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Comes with complete installation instructions as well as step by step instructions on how to repair damaged seat foam. Fits: the Original Stock Honda CB750K (1978) Seat Only This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
Seat Cover
Replacement Seat Cover (No hardware or chrome trim included just re-use existing hardware). There is not a "Honda" stencil on the rear of the cover due to copyright. There is a layer of foam sewn into the top of the seat cover to improve ride comfort and smooth out any defects in your seat foam. Each seat cover is made entirely by hand, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Comes with complete installation instructions as well as step by step instructions on how to repair damaged seat foam. Fits: the Original Stock Honda CB750K (1980-82) Seat Only This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
Battery Box Rubber "A"
Battery Box Rubber "A", Replaces OEM # 50323-300-010 This rubber is fastened into the top section of the Battery Box. Fits: Honda CB750K (1969-76) - 4 Used Per Bike, CB750K (1977-78) - 3 Used Per Bike, CB750F (1975-76) Supersport - 4 Used Per Bike, CB750F (1977-78) Supersport - 3 Used Per Bike, CB750A (1976-78) Hondamatic - 2 Used Per Bike Note: Order the Quantity of Rubbers you Require
Seat Cover
Replacement Seat Cover with Reinforced Passenger Strap (No trim or hardware included just re-use existing hardware). There is not a "Honda" stencil on the rear of the cover due to copyright. There is a layer of foam sewn into the top of the seat cover to improve ride comfort and smooth out any defects in your seat foam. Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Comes with complete installation instructions as well as step by step instructions on how to repair damaged seat foam. Fits: the Original Stock Honda CB750K (1970-71) WITH THE NON DUCK TAIL STYLE SEAT ONLY If you have a CB750K 1970 see our listing above to compare the regular style to the duck tail style to ensure you are ordering the correct cover. The duck tail has a raised end and also has a different stitching pattern as shown. This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
Battery Box Rubber Set
Battery Box Rubber Set. Includes Battery Rubber X1, Battery Box Collar X1, Bolt X1 and Washer X1. This set fastens into the top section of the Battery Box. Fits: Honda CB750K (1969-76) - 4 Sets Used Per Bike, CB750K (1977-78) - 3 Sets Used Per Bike, CB750F (1975-76) Supersport - 4 Sets Used Per Bike, CB750F (1977-78) Supersport - 3 Sets Used Per Bike, CB750A (1976-78) Hondamatic - 2 Sets Used Per Bike Note: Order the Quantity of Sets you Require
Rear Fuel Tank Holder Rubber
Rear Fuel Tank Holder Rubber, Replaces OEM # 17613-292-000
Side Stand Pivot Bolt & Nut Set
Side Stand Pivot Bolt & Nut Set, This is the Set Used to Fasten the Side Stand in Place. Replaces OEM # 90108-283-000 (Bolt) and 94002-10000-0S (Nut).
Headlight Reflector Rubber Base
Headlight Reflector Rubber Base, Replaces OEM# 33743-425-600 This is the rubber base that the headlight reflector attaches to. Sold Each, order the quantity you require
Chain Guard
Chain Guard, Replaces OEM# 40510-341-010B This flat black chain guard replaces the original metal one which was prone to rusting. Easy stock mount, this is a simple way to spruce up the look of your bike!
Chrome Stock Type Rear Fender
Chrome Stock Type Rear Fender, Replaces OEM # 80100-341-000
Black Stock Type Rear Fender
Black Stock Type Rear Fender, Replaces OEM # 80100-341-000
Brake Hose Rubber Grommet
Brake Hose Rubber Grommet, This is the Rubber Grommet that Attaches to the Brake Hose. Replaces OEM # 45146-300-000
Shock Absorber Joint Rubber Set/2
Shock Absorber Joint Rubber Set/2. Replaces OEM # 52484-292-000
Mounting Rubber
Mounting Rubber, Replaces OEM # 17245-107-010
Side Stand Spring
Side Stand Spring, Replaces OEM # 95014-72402
Front Fender Hardware/ Fender Stay Hardware Set
3 PC. Front Fender Hardware/ Fender Stay Hardware Set. Includes Setting Rubber, Bolt and Metal Collar. Replaces OEM#40513-310-000 (Rubber), OEM#40514-310-000 (Metal Collar) and OEM#92101-06020-0A (Bolt). Purchase the Quantity of Sets you Require for your Application
Side Stand Rubber Hardware Set
Side Stand Rubber Hardware Set, Includes Metal Collar and Silver Colored Flange Bolt.
Seat Lock with Keys
Seat Lock with Keys, Replaces OEM # 77230-399-007 / 77230-107-711 This seat lock works perfect for the bikes listed but the locking mechanism sticks out a bit farther then the OEM type. If you have lost your old key you have to remove the seat lock bracket and assembly. This can be done with a short 10mm wrench or socket, once that's done the rest is easy.
Center Stand Spring Plate
Center Stand Spring Plate, This is the Plate the Center Stand Spring Attaches to. Replaces OEM # 50523-425-000
Footrest Rubbers
Footrest Rubbers (Set/2) - OEM Ref # 50661-425-670
Seat Lock Bar Assembly
Seat Lock Bar Assembly, Replaces OEM# 77220-340-003 / 77220-340-011
Side Stand Rubber
Side Stand Rubber Cushion. Replaces OEM # 50548-356-700
Rear Wheel Damper Rubber Set
8 Piece Rear Wheel Drive Damper Rubber Set. Includes all 8 Rubber Dampers for the Rear Wheel 41242-300-020 X4, 41241-300-040 X4. These fit between the rear wheel sprocket hub and the wheel hub and get worn down over time from use. Freshen your bike up with a new set!
Passenger Rear Footrest Rubber Set
Passenger Rear Footrest Rubber Set/2, Replaces OEM # 50710-405-000
Sidecover Damper Rubber B
Rubber Sidecover Damper B, Replaces OEM # 83551-300-000
Carb Air Box Rubber Boot Set/4
Carburetor to Air Box Rubber Boot Set of 4. Replace your Old Worn, Cracked or Dried out Rubber Boots with a Brand New Set! Replaces OEM # 17253-425-000 X2 and 17254-425-000 X2. NOTE-If you require band clamps, these rubber boots require our 58-60mm diameter band clamps part #15-0690 X4 or gear clamps #15-0670 X4.
Side Stand Rubber Hardware Set
Side Stand Rubber Hardware Set, Includes Metal Collar, Bolt and Washer.
TC Bros. Forward Controls Kit
TC Bros. Brand Bolt-On Forward Controls Kit. Kit includes a pair of forward controls featuring CNC machined, knurled aluminum pegs. The mounting plates are heavy duty powder coated steel and bolt to your front motor mounts. The spacers are TIG welded to the mounting plates. Everything bolts on using the supplied mounting hardware with no frame modifications. Mounting instructions with pictures are included with each kit. This kit makes long trips much more comfortable due to the fact that your legs are extended forward rather than bent. Great for choppers, bobbers, or even stock bikes. High Quality, Made in the USA. Linkage Kit Not Included, We Sell that part #73-1164
Pilot Indicator Light Cover
Pilot Indicator Light Cover, Replaces OEM# 37600-377-018 This includes the front and rear cover with fastening screws.