Honda ► CB750K ►
-
Here’s our hand-picked list of parts and accessories for your Honda CB750K with universal parts included►
- Honda
Sidecover Damper Rubber B
Rubber Sidecover Damper B, Replaces OEM # 83551-300-000
Seat Rubber "B"
Seat Setting Rubber "B". This is one of the Rubber Settings Under the Seat. Replace those old worn Rubbers with a brand new one! Replaces OEM # 77205-286-000 Order the Quantity of Seat Rubber "B" your Bike Requires
Front Fuel Tank Holder Rubber
Front Fuel Tank Holder Rubber - Replaces OEM # 17611-283-010 Sold Each.
Rear Fuel Tank Holder Rubber
Rear Fuel Tank Holder Rubber, Replaces OEM # 17613-292-000
Complete Side Cover Rubber Set
Complete 6pc Sidecover Rubber Set (enough for both sidecovers). This set includes a total of 6 rubbers. Replaces OEM # 17247-303-000 (X2) and 83551-300-000 (X4).
Kick Stand Stopper Rubber
Kick Stand Stopper Rubber "A" - Replaces OEM# 95011-61000.
Gas Tank Emblem
Gas Tank Emblem, Replaces OEM# 87122-300-020 / 87121-300-020 Fits: Honda CB750K (1969) CB750K (1970) - Frame Number 1044649 and lower Sold Each, Order the Quantity you Require
Replacement Mirror
Replacement Mirror (R.H) 4 1/2" Diameter, 10mm Thread. Replaces OEM# 88110-333-611
Replacement Mirror
Replacement Mirror (L.H) 4 1/2" Diameter, 10mm Thread. Replaces OEM# 88120-333-611
CB Black Mirror - Original Type (Left Side)
Gloss Black CB Style Left Side Mirror - 4 1/2" Diameter with 10mm. RH Thread & 7" Stems.
CB Black Mirror - Original Type (Right Side)
Gloss Black CB Style Right Side Mirror - 4 1/2" Diameter with 10mm. RH Thread & 7" Stems.
CB Black Mirror - Early Stock Type
CB750 Eary Stock Type Black Mirror - 4" Diameter Mirror, 8" Stem, 10mm. RH Thread. Replaces OEM # 88110-300-000 Original Stock Type For: Honda CB750K (1969-70), Note: These Fit Both Left And Right Side Of Bike, Order 2 For A Complete Set
Seat Cover
Replacement Seat Cover with Reinforced Passenger Strap (No trim or hardware included just re-use existing hardware). There is not a "Honda" stencil on the rear of the cover due to copyright. There is a layer of foam sewn into the top of the seat cover to improve ride comfort and smooth out any defects in your seat foam. Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Comes with complete installation instructions as well as step by step instructions on how to repair damaged seat foam. Fits: the Original Stock Honda CB750K (1969-70) WITH THE DUCK TAIL STYLE SEAT ONLY. If you have a CB750K 1970 see our listing below to compare the regular style to the duck style to ensure you are ordering the correct cover. The duck tail has a raised end and also has a different stitching pattern as shown. This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
Rear Shock Swingarm Bushing
Rear Shock Swingarm Bushing, Replaces OEM# 40548-268-000 19mm Long, 22mm OD, 10mm ID. Sold Each, Order the Quantity you Require
Center Stand Spring
Center Stand Spring. Replaces OEM # 95014-71702
Side Cover Emblem Set 1969-70K ~ Gold
Side Cover Emblem Set, Gold Honda Wing Emblems with Silver Background. Includes Both Left and Right Side Cover Emblems (Clips Not Included). Replaces OEM # 87123-300-020 and 87124-300-020 Fits: Honda CB750K (1969-70) Attachment Clips Sold Separate #73-0944
Side Cover Emblem Set 1969-70K ~ Black
Side Cover Emblem Set, Black Honda Wing Emblems with Silver Background. Includes Both Left and Right Side Cover Emblems (Clips Not Included). Replaces OEM # 87123-300-020 and 87124-300-020 Fits: Honda CB750K (1969-70) Attachment Clips Sold Separate #73-0944
Chrome Side Grab Bar
Chrome Side Grab Bar, Replaces OEM # 50316-300-030 Replace that old worn out grab bar with a new one to add to the look of your bike! Some people put these on both sides. Fits: Honda CB750K (1969-71), CB750K (1972-76) * fits if you don't have the Full Grab Rail installed * Fits: Honda CB400F (1975-77) Supersport * Fits without any modifications but has a slightly different angle then the stock type *
Oil Tank Rubber Set
Oil Tank Rubber Set (3 Rubbers). These are the 3 Rubbers that Attach to the 2 Top Corners and Bottom of the Oil Tank. Replace OEM # 55106-300-000
Brake Hose Rubber Grommet
Brake Hose Rubber Grommet, This is the Rubber Grommet that Attaches to the Brake Hose. Replaces OEM # 45146-300-000
Shock Absorber Joint Rubber Set/2
Shock Absorber Joint Rubber Set/2. Replaces OEM # 52484-292-000
Rear Wheel Damper Rubber Set
8 Piece Rear Wheel Drive Damper Rubber Set. Includes all 8 Rubber Dampers for the Rear Wheel 41242-300-020 X4, 41241-300-040 X4. These fit between the rear wheel sprocket hub and the wheel hub and get worn down over time from use. Freshen your bike up with a new set!
Footrest Rubbers
Footrest Rubbers (Set/2) - OEM Ref # 50661-110-000
Passenger Rear Footrest Rubber Set
Passenger Rear Footrest Rubber Set/2, Replaces OEM # 95011-31000
Front Fork Top Bridge / Triple Tree Washer Kit
Front Fork Top Bridge / Triple Tree Washer Kit of 2 Washers. These washers are needed in order to avoid broken top triple trees when you tighten up your fork tube clamps. Replace # OEM 53235-300-000
Center Stand Spring Plate
Center Stand Spring Plate, This is the Plate the Center Stand Spring Attaches to. Replaces OEM # 50523-300-010
Side Stand Pivot Bolt & Nut Set
Side Stand Pivot Bolt & Nut Set, This is the Set Used to Fasten the Side Stand in Place. Replaces OEM # 90108-283-000 (Bolt) and 94002-10000-0S (Nut).
Left Side Footrest Return Spring
Left Side Footrest Return Spring. This is the Spring that Allows the Left Side Footpeg to be Lowered and Raised. Replaces OEM # 50644-300-670
Battery Box Rubber Set
Battery Box Rubber Set. Includes Battery Rubber X1, Battery Box Collar X1, Bolt X1 and Washer X1. This set fastens into the top section of the Battery Box. Fits: Honda CB750K (1969-76) - 4 Sets Used Per Bike, CB750K (1977-78) - 3 Sets Used Per Bike, CB750F (1975-76) Supersport - 4 Sets Used Per Bike, CB750F (1977-78) Supersport - 3 Sets Used Per Bike, CB750A (1976-78) Hondamatic - 2 Sets Used Per Bike Note: Order the Quantity of Sets you Require
Battery Box Rubber "A"
Battery Box Rubber "A", Replaces OEM # 50323-300-010 This rubber is fastened into the top section of the Battery Box. Fits: Honda CB750K (1969-76) - 4 Used Per Bike, CB750K (1977-78) - 3 Used Per Bike, CB750F (1975-76) Supersport - 4 Used Per Bike, CB750F (1977-78) Supersport - 3 Used Per Bike, CB750A (1976-78) Hondamatic - 2 Used Per Bike Note: Order the Quantity of Rubbers you Require
Side Cover Emblem Fixing Nut Pk/2
Side Cover Emblem Fixing Nut (3mm) Pk/2, Used to Attach the Side Cover Emblems. Replaces OEM # 90313-567-000 Check your bike to see the quantity you require
Passenger Rear Footpeg Pin & Cotter Pin Set
Passenger Rear Footpeg Pin & Cotter Pin Set. Set Includes 2 Footpeg Pins and 2 Cotter Pins. Replaces OEM # 95015-83000
Seat Hinge Pin with Hardware
Seat Hinge Pin and Hardware Set, Includes 1 Pin, 1 Washer and 1 Attachment Clip. Note: Set Includes Enough for One Hinge, Order the Quantity of Sets you Require
Seat Hinge Set
Seat Hinge Set, This set is a reproduction of the original hinges no longer available from Honda. Set includes Hinge A, Hinge B, 2 Long Pins, 2 Attachment Lock Pins and 2 Washers.
Right Side Footrest Return Spring
Right Side Footrest Return Spring. This is the Spring that Allows the Right Side Footpeg to be Lowered and Raised. Replaces OEM # 50617-300-670
Battery Box Rubber "B"
Battery Box Rubber "B", Replaces OEM # 50327-300-000 Sold Each, Order the Quantity you Require
CB Chrome Mirror - Early Stock Type
CB750 Eary Stock Type Chrome Mirror - 4" Diameter Mirror, 8" Stem, 10mm. RH Thread. Replaces OEM # 88110-300-000 Note: These Fit Both Left And Right Side Of Bike, Order 2 For A Complete Set
Rear Fender Eliminator
Rear Fender Eliminator. Includes holes for custom tail light and license plate install. These are Great for Cafe builds and custom work! If you want a Licence Plate Frame to go with this, Our #73-0087 or 73-0088 fit perfectly, Tailllight #11-2325
TC Bros. Forward Controls Kit
TC Bros. Brand Bolt-On Forward Controls Kit. Kit includes a pair of forward controls featuring CNC machined, knurled aluminum pegs. The mounting plates are heavy duty powder coated steel and bolt on in place of your front motor mount on one side and u-bolt to your frame on the other side. The spacers are TIG welded to the mounting plates. Everything bolts on using your stock mounting hardware and with no frame modifications. The only welding required is a tab that is welded to your stock brake pedal in order to attach the linkage rods. It is easily done and mounting instructions with pictures are included with each kit. This kit makes long trips much more comfortable due to the fact that your legs are extended forward rather than bent. Great for choppers, bobbers, or even stock bikes. High Quality, Made in the USA. Linkage Kit Not Included
Mounting Clamp ~ Black
Black Speedo/Tach/Mirror Mounting Clamp 2 Piece Die-Cast Alloy Clamp With 10mm RH Thread Fits 7/8" Bars
Viper Cafe Fairing
Universal Gloss Black Viper Cafe Racer Fairing with Smoked Windshield. Designed to protect the rider from wind pressure and debris. Mounting hardware included. Fits: Bikes With 7" or Smaller Headlights
Custom Grey Windshield
Custom Grey Acrylic Windshield. Includes 2 fully adjustable 7/8" clamps attached to the windshield which can be adjusted in just about any angle and direction for an easy install. Width 18.3", Height 22"
Custom Clear Windshield
Custom Clear Acrylic Windshield. Includes 2 fully adjustable 7/8" clamps attached to the windshield which can be adjusted in just about any angle and direction for an easy install. Width 18.3", Height 22"
Custom Grey Windshield
Custom Grey Acrylic Windshield. Includes 2 fully adjustable 7/8" clamps attached to the windshield which can be adjusted in just about any angle and direction for an easy install. Width 16.25", Height 18"
Custom Clear Windshield
Custom Clear Acrylic Windshield. Includes 2 fully adjustable 7/8" clamps attached to the windshield which can be adjusted in just about any angle and direction for an easy install. Width 16.25", Height 18"
Venom Cafe Racer Fairing
Universal Gloss Black Venom Cafe Racer Fairing with Smoked Windshield. Designed to protect the rider from wind pressure and debris. Mounts by using the side bolts of your headlight. Fits: Bikes With 7" or Smaller Headlights
Chrome Goldwing Emblem Set/2
Chrome 3D Goldwing Emblem Set/2. Features a Sticker Back for Easy Application. These Custom Emblems Can Be Used Anywhere! 16.5cm Long x 1cm Width x 0.40cm Thickness