Honda ► CB750K ►
-
Here’s our hand-picked list of parts and accessories for your Honda CB750K►
- Honda
Handlebar Rubber Boot
Handlebar Rubber Boot. Replaces OEM # 53180-425-010
Speedo/Tachometer Meter Cushion
Speedo/Tachometer Meter Cushion, Replaces OEM # 37235-323-700
Speedo/Tachometer Meter Rubber
Speedometer/Tachometer Meter Rubber, Replaces OEM # 37235-300-029 One Used with the Speedo and One with the Tachometer, Order the Quantity you Require
Drive Chain Adjuster Set
Complete Drive Chain Adjuster Set, Includes 2 Chain Adjusters, 2 Chain Adjusting Bolts and 2 Adjuster Nuts. Replaces OEM # 40543-392-000
DOHC Screw Set
71PC DOHC Screw Set, Includes Front Stay Plate Screws (8), CV Cap Screws (8), Throttle Cable Bracket Screw (1), Rear Stay Plate Screws (8), Vacuum Petcock Screws (6), Bowl Screws (12), Accelerator Pump Cover Screws (3), Air Cutoff Screws (8), Choke Cable Clamp Screw (1), Throttle Plate Screws (8) and Choke Plate Screws (8).
Carburetor Cap Screw Set/8
Carburetor Cap Screw Set/8 with Metal Washers.
Drive Chain Adjuster Set
Complete Drive Chain Adjuster Set, Includes 2 Chain Adjusters, 2 Chain Adjusting Bolts and 2 Adjuster Nuts. Replaces OEM # 40543-425-000
Positive (+) Battery Cable
Positive (+) Battery Cable with Rubber End Covers. Replaces OEM # 32401-392-000
Starter Relay Solenoid Cable
Starter Relay Solenoid Cable, Replaces OEM # 35858-392-000 / 35858-333-000 / 35858-393-000
Positive (+) Battery Cable
Positive (+) Battery Cable with Rubber End Covers. Replaces OEM # 32401-425-010
Negative (-) Battery Cable
Negative (-) Battery Cable (Ground Cable). Replaces OEM # 32601-MA3-840
Horn Sub Harness
Horn Sub Harness, This is the Harness that Attaches to the Horn. Replaces OEM # 38105-369-000
Starter Motor Cable
Starter Motor Cable, Replaces OEM # 32402-425-000
Headlight Plug ~ OEM Style
Headlight Plug ~ OEM Style, Replaces OEM # 33130-300-003
Negative (-) Battery Cable
Negative (-) Battery Cable (Ground Cable). Replaces OEM # 32601-392-000
Fuse Box Assembly
Fuse Box Assembly Complete with 15Amp Fuses, Replaces OEM # 38200-MF9-405
Fuse Box Assembly
Fuse Box Assembly Complete with 10Amp Fuses, Replaces OEM # 38200-425-005
Rear Turn Signal Mount & Collar Set
Rear Turn Signal Mount, Collar and Rubber Set. Includes both Left and Right Sides. These are needed when installing the Rear signals. Replaces OEM # 33605-323-670 (Left Side) & 33606-074-010 (Right Side).
Rear Wheel Damper Rubber Set
8 Piece Rear Wheel Drive Damper Rubber Set. Includes all 8 Rubber Dampers for the Rear Wheel 41242-300-020 X4, 41241-300-040 X4. These fit between the rear wheel sprocket hub and the wheel hub and get worn down over time from use. Freshen your bike up with a new set!
Seat Lock with Keys
Seat Lock with Keys, Replaces OEM # 77230-399-007 / 77230-107-711 This seat lock works perfect for the bikes listed but the locking mechanism sticks out a bit farther then the OEM type. If you have lost your old key you have to remove the seat lock bracket and assembly. This can be done with a short 10mm wrench or socket, once that's done the rest is easy.
Helmet Holder Lock w Keys
Helmet Holder Lock with Keys, Replaces OEM # 50710-086-007
Rear Wheel Spoke Set
Rear Spoke Set with Nipples - 40 Spokes with 40 Nipples. Note: Spokes are Silver in Color and Nipples are Gold in Color. Fits: 17" Stock Rear Wheel
Engine Bolt Set
Engine Bolt Set, 60 Pieces, Includes 13 Different Bolt Types and 2 Allen Keys.
Exhaust Hardware Set
Exhaust Hardware 10 Piece Set. This Set includes various hard to find hardware needed to install the Stock OEM Type Exhaust. Set Includes: X1 stand stopper rubber C 95011-63000 X1 stand stopper rubber A 95011-63000 X2 pillon step bolt 90146-300-020 X2 nut 94030-12000 X2 flat washer 94102-12000 X2 spring washer 94111-12000 Fits: Stock Type Exhaust on Honda CB750K (1969-76) Note: Exhaust Flange Clamps and Exhaust Pipe Flanges with Hardware are Not Included in this Set, We Sell them Separate.
Shock Absorber Set ~ Stock Design ~ CB750K 1969-71
Stock Type Designed Shock Absorber Set - Chrome Body with Chrome Springs and Black Center. These are modelled after the original stock shocks made for the CB750K 1969-71. The original OEM shocks came with 3 position spring preload adjustments however we have upgraded these to 5 spring preload adjustments so you can better fine tune these shocks! 336mm (13 1/4") Center of Eye to Eye. Stock Match for: Honda CB750K (1969-71) Will Also Fit: Honda CB750K (1972-78), CB750F (1975-78) Supersport, CB750A (1976-78) Hondamatic
Handlebar - Stock Type ~ CB750K 1973-76 / CB750F 1975-76
Stock Type Handlebar for the CB750K (1973-76), CB750F (1975-76) - Chrome. Drilled for wires like the OEM type. Bar Diameter - 7/8" - 22mm, Length - 32" - 812mm, Pull Back - 5 1/4" - 133mm, Inner Rise - 6 1/2" - 165mm, End Rise - 8" - 203mm, Center Width - 6 1/2" - 165mm, Base Width - 9 1/2" - 241mm, Knurl Width - 4 1/2" - 114mm, Control Length - 9" - 228mm, Drilled - YES Replaces OEM # 53100-341-700 Note: These Are Drilled For Wires
Front Fork Headlight Mounting Cover Set
Front Fork Headlight Mounting Cover Set, Includes the Right and Left Fork Covers. Replaces OEM# 51602-341-701 and # 51606-341-701. Fits: Honda CB750K (1973-76)
Valve Shim Kit
20 Piece Valve Shim Kit with Plastic Case, 25mm Diameter Valve Shims. Includes 2 of each of the following sizes. 2.30, 2.40, 2.50, 2.55, 2.60, 2.70, 2.80, 2.90, 3.00, 3.10.
Front Wheel Spoke Set
Front Spoke Set with Nipples and O-Rings - 40 Spokes with 40 Nipples and 40 Metal O-Rings. Note: Both Spokes and Nipples are Silver in Color. For Stock 19" Front Type Rims Only
Rear Wheel Spoke Set
Rear Spoke Set with Nipples - 40 Spokes with 40 Nipples. Note: Both Spokes and Nipples are Silver in Color. For Stock 17" Rear Type Rims Only
Rear Brake Rod Assembly
Rear Brake Rod Assembly, Includes Brake Rod, Spring, Brake Arm Joint, Brake Rod Adjusting Nut, Brake Rod Joint Pin and Cotter Pin.
Footrest Rubbers
Footrest Rubbers (Set/2) - OEM Ref # 50661-110-000
Passenger Rear Footrest Rubber Set
Passenger Rear Footrest Rubber Set/2, Replaces OEM # 50716-371-660
Passenger Rear Footrest Rubber Set
Passenger Rear Footrest Rubber Set/2, Replaces OEM # 95011-31000
Front Wheel Bearing Retainer Ring Tool
Front Wheel Bearing Retainer Ring Tool. High quality tool for removing and fitting the front wheel bearing retainer ring with 1/2 inch socket bar wrench tool hole. The perfect tool for easier removal and fitting without damaging the special retainer ring.
Rear Wheel Bearing Retainer Ring Tool
Rear Wheel Bearing Retainer Ring Tool. High quality tool for removing and fitting the rear wheel sprocket hub bearing retainer ring with 1/2 inch socket bar wrench tool hole. OR removing and fitting the rear wheel sprocket carrier bearing retainer ring. The perfect tool for easier removal and fitting without damaging the special retainer ring. Removes Rear Wheel Sprocket Carrier Bearing Retainer Ring on the Honda CB750K (1969-78), CB750F (1975-78) Supersport, CB750A (1976-78) Hondamatic Removes Rear Wheel Hub Bearing Retainer Ring on the Honda CB750K (1969-82), CB750A (1976-78) Hondamatic CB750C (1980-82) Custom, CB750L (1979) Limited CB650 (1979-82), CB650C (1980-81) Custom, CB650SC (1982) Nighthawk
CB750K 1969-70 Tachometer Face Plate
Tachometer Face Plate (Like Original) Disassembly of tachometer is required. All face plates are "printed" in the United Kingdom on the highest quality materials. Every detail has been designed very accurately to achieve an exact copy of the original face plates. With this set you are able to restore your gauges to the manufacturers standards. This face plate is supplied without jewels. You can re-use the jewels from the faces you replace or we sell those separately.
CB750K 1969-70 Speedo & Tachometer Face Plate Set ~ KM/H
Speedometer & Tachometer Face Plate (Like Original) Set ~ KM/H Type. Disassembly of speedometer and tachometer is required. All face plates are "printed" in the United Kingdom on the highest quality materials. Every detail has been designed very accurately to achieve an exact copy of the original face plates. With this set you are able to restore your gauges to the manufacturers standards. This face plate set is supplied without jewels. You can re-use the jewels from the faces you replace or we sell those separately.
CB750K 1971 Speedo & Tachometer Face Plate Set ~ KM/H
Speedometer & Tachometer Face Plate (Like Original) Set ~ KM/H Type. Disassembly of speedometer and tachometer is required. All face plates are "printed" in the United Kingdom on the highest quality materials. Every detail has been designed very accurately to achieve an exact copy of the original face plates. With this set you are able to restore your gauges to the manufacturers standards. This face plate set is supplied without jewels. You can re-use the jewels from the faces you replace or we sell those separately.
CB750K 1972-73 Speedo & Tachometer Face Plate Set ~ MPH
Speedometer & Tachometer Face Plate Set ~ MPH Type. Disassembly of speedometer and tachometer is required. All face plates are "printed" in the United Kingdom on the highest quality materials. Every detail has been designed very accurately to achieve an exact copy of the original face plates. With this set you are able to restore your gauges to the manufacturers standards. Note: This is the rectangular style cutout (On the speedo the cutouts are rectangular shaped), we also carry a L-Cut style for the CB750K 1972, double check your speedo to see the style you require before purchase.
CB750K 1972 Speedo & Tachometer Face Plate Set ~ KM/H
Speedometer & Tachometer Face Plate Set ~ KM/H Type. Disassembly of speedometer and tachometer is required. All face plates are "printed" in the United Kingdom on the highest quality materials. Every detail has been designed very accurately to achieve an exact copy of the original face plates. With this set you are able to restore your gauges to the manufacturers standards. Note: This is the rectangular style cutout (On the speedo the cutouts are rectangular shaped), we also carry a L-Cut style for the CB750K 1972, double check your speedo to see the style you require before purchase.
CB750K 1972-74 L-Cut Style Speedo & Tachometer Face Plate Set ~ KM/H
Speedometer & Tachometer Face Plate L-Cut Version Set ~ KM/H Type. Disassembly of speedometer and tachometer is required. All face plates are "printed" in the United Kingdom on the highest quality materials. Every detail has been designed very accurately to achieve an exact copy of the original face plates. With this set you are able to restore your gauges to the manufacturers standards. Note: This is the L-Cut style (On the speedo the cutouts are L shaped), we also carry a standard style for the CB750K 1972, double check your speedo to see the style you require before purchase.
CB750K 1974 Speedo & Tachometer Face Plate Set ~ MPH
Speedometer & Tachometer Face Plate Set ~ MPH Type. Disassembly of speedometer and tachometer is required. All face plates are "printed" in the United Kingdom on the highest quality materials. Every detail has been designed very accurately to achieve an exact copy of the original face plates. With this set you are able to restore your gauges to the manufacturers standards. Fits: Honda CB750K (1974) Note: The maker of these face plates makes these in the L-Cut style (On the speedo the cutouts are L shaped) but also the rectangular shaped cutout. They ship us whichever style they currently have in stock. The one you purchase may be L-Cutout or Rectangular cutout. Either will work on this bike.
CB750K 1976 Speedo & Tachometer Face Plate Set ~ MPH
Speedometer & Tachometer Face Plate (Like Original) Set ~ MPH Type. Disassembly of speedometer and tachometer is required. All face plates are "printed" in the United Kingdom on the highest quality materials. Every detail has been designed very accurately to achieve an exact copy of the original face plates. With this set you are able to restore your gauges to the manufacturers standards.
CB750K 1977 Speedo & Tachometer Face Plate Set ~ KM/H
Speedometer & Tachometer Face Plate (Like Original) Set ~ KM/H Type. Disassembly of speedometer and tachometer is required. All face plates are "printed" in the United Kingdom on the highest quality materials. Every detail has been designed very accurately to achieve an exact copy of the original face plates. With this set you are able to restore your gauges to the manufacturers standards.
CB750K 1977 Speedo & Tachometer Face Plate Set ~ MPH
Speedometer & Tachometer Face Plate (Like Original) Set ~ MPH Type. Disassembly of speedometer and tachometer is required. All face plates are "printed" in the United Kingdom on the highest quality materials. Every detail has been designed very accurately to achieve an exact copy of the original face plates. With this set you are able to restore your gauges to the manufacturers standards.
CB750K 1978 Speedo & Tachometer Face Plate Set ~ KM/H
Speedometer & Tachometer Face Plate (Like Original) Set ~ KM/H Type. Disassembly of speedometer and tachometer is required. All face plates are "printed" in the United Kingdom on the highest quality materials. Every detail has been designed very accurately to achieve an exact copy of the original face plates. With this set you are able to restore your gauges to the manufacturers standards.
CB750K 1978 Speedo & Tachometer Face Plate Set ~ MPH
Speedometer & Tachometer Face Plate (Like Original) Set ~ MPH Type. Disassembly of speedometer and tachometer is required. All face plates are "printed" in the United Kingdom on the highest quality materials. Every detail has been designed very accurately to achieve an exact copy of the original face plates. With this set you are able to restore your gauges to the manufacturers standards.
CB750K 1976 Speedo & Tach Face Decal Set ~ KM/H
Speedometer & Tachometer Face Decal (Sticker) Set ~ KM/H Type. This decal set must be applied over the original gauge face to illuminate. Disassembly of speedometer and tachometer is required. Mounting holes are pre cut to simplify application. Openings for odometer & tripmeter must be cut out after application. Removal of original information printed on OEM plastic face is required prior to application of these decals. All decals are "printed" in North America on the highest quality materials.
CB750K 1975 Speedo & Tach Face Decal Set ~ MPH
Speedometer & Tachometer Face Decal (Sticker) Set ~ MPH Type. This decal set must be applied over the original gauge face to illuminate. Disassembly of speedometer and tachometer is required. Mounting holes are pre cut to simplify application. Openings for odometer & tripmeter must be cut out after application. Removal of original information printed on OEM plastic face is required prior to application of these decals. All decals are "printed" in North America on the highest quality materials.