Honda ► CB750K ►
-
Here’s our hand-picked list of parts and accessories for your Honda CB750K with universal parts included►
- Honda
Valve Stem Seal
Valve Stem Seal OEM Ref # 12209-MB9-003
Cylinder Head Nut Cover
Cylinder Head Nut Cover OEM Ref # 91318-300-013
Economy Engine Oil Seal Kit
7 pc. Engine Oil Seal Kit 1 pc. 91205-300-005 Countershaft sprocket oil seal 25 x 62 x 7.8 1 pc. 91202-216-000 / 91202-302-010 Clutch arm seal - SB type - 13.7 x 24 x 5 1 pc. 91206-286-005 / 91206-286-013 / 91206-286-003 Shift shaft seal - 14 x 28 x 7 1 pc. 91201-300-003 Crank seal 30 x 42 x 8 1 pc. 91215-300-003 Seal - Starting clutch gear - 25 x 33 x 4 1 pc. 91204-286-003 / 91204-286-005 Kickstart Oil Seal 18 x 29 x 7 1 pc. 91211-286-003 Tach drive oil seal 4.8 x 14.5 x 4
Engine Oil Seal Kit
Engine Oil Seal Kit
Intake Valve
Intake Valve OEM Ref # 14711-300-005 / 14711-ME2-000 Made In Japan
Exhaust Valve
Exhaust Valve OEM Ref # 14721-300-005 Made In Japan
Gas/Fuel Tank Cap Latch Assembly ~ Black
Gas/Fuel Tank Cap Latch Assembly, Includes Black Latch with Return Spring, Latch Mounting Pin and C-Clip.
Tappet Covers
Finned Tappet Cover - Sold Each Comes With O-Ring gasket High Quality Chrome Finish
Tail Light Bracket
Chrome Tail Light Bracket, Replaces OEM # 84701-341-670 / 84701-371-980
Honda OEM Type Grips
Honda OEM Type Rubber Grip Set - Black - Closed end type for 7/8" bars. These are replica's of the original type grips from the factory. 135mm Length. Replaces OEM #' 53165-342-670 / 53166-342-670
Throttle Sleeve
Nylon Throttle Sleeve - Replaces OEM # 53141-300-010
Footrest Rubbers
Footrest Rubbers Pk/2 OEM Ref # 50661-310-000 / 50661-312-000
Kickstart Rubber
Kickstart Rubber OEM Ref # 28311-329-000 / 95011-51000 / 28311-342-000
Gear Change Rubber
Gear Change Rubber OEM Ref # 95011-400-000
Chrome Speedometer & Tachometer Cover Set
Set of Chrome Plated Speedometer & Tachometer Covers. These go over the stock speedo and tach gauges to give them a great chrome look! Diameter at Base of Cover - 103mm Diameter at Top of Covers - 87mm Height of Covers - 37mm Includes a small hole in one of the covers for the tripmeter. Note: Speedo/Tach Not Included, Shown in Photo to illustrate how they look when installed.
Sidecover Damper Rubber B
Rubber Sidecover Damper B, Replaces OEM # 83551-300-000
Sidecover Damper Rubber A
Rubber Sidecover Damper A, Replaces OEM # 17247-303-000
Seat Rubber "B"
Seat Setting Rubber "B". This is one of the Rubber Settings Under the Seat. Replace those old worn Rubbers with a brand new one! Replaces OEM # 77205-286-000 Order the Quantity of Seat Rubber "B" your Bike Requires
Front Fuel Tank Holder Rubber
Front Fuel Tank Holder Rubber - Replaces OEM # 17611-283-010 Sold Each.
Rear Fuel Tank Holder Rubber
Rear Fuel Tank Holder Rubber, Replaces OEM # 17613-292-000
Complete Side Cover Rubber Set
Complete 6pc Sidecover Rubber Set (enough for both sidecovers). This set includes a total of 6 rubbers. Replaces OEM # 17247-303-000 (X2) and 83551-300-000 (X4).
Carburetor Dust Cap
Rubber Carburetor Dust Cap/Cover, Replaces OEM # 16154-300-004
Stock Style Tachometer
Stock Style Tachometer, Face dial ranges from 0-12000RPM. The ratio of this Tachometer is 4:1 which is the ratio used on stock CB750's. Note: The CB Tachometers slightly changed from year to year, this may not be an exact stock match for your bike but will work great! Housing Size approx 4.6", face 3.9" Check the photo for the design.
Stock Style Speedometer - KPH
Stock Style Speedometer KPH with back illumination, Face dial ranges from 0-240KPH. The ratio of this Speedometer is 100KPH=2330 RPM which is the ratio used on all stock type CB's. Note: The Speedometers slightly changed from year to year, this may not be an exact stock match for your bike but will work great! Housing Size approx 4.6", face 3.9" Check the photo for the design.
Starter Motor Seal
Starter Motor Seal - Size 24.4 x 3.1, Replaces OEM# 91312-MG7-003 / 91309-300-000 / 91309-425-003
Starter Motor Seal
Starter Motor Seal - 60 x 1.4 - Replaces OEM# 31206-286-158 / 31206-402-008
Piston Ring Set (Standard Size)
Standard Size Piston Ring Set Ring Set OEM Ref. # 13011-300-024 (Std.) Japanese made Superior Quality Note: This Set includes piston rings to rebuild one piston, 4 Sets are needed to rebuild all pistons.
Piston Ring Set - 1st Oversize (0.25mm.)
1st Oversize Piston Ring Set + 0.25mm. Ring Set OEM Ref. # 13021-300-024 Japanese made Superior Quality Note: This Set includes piston rings to rebuild one piston, 4 Sets are needed to rebuild all pistons.
Piston Ring Set - 2nd. Oversize (0.50mm)
2nd. Oversize Piston Ring Set + 0.50mm. Ring Set OEM Ref # 13031-300-024 Japanese made Superior Quality Note: This Set includes piston rings to rebuild one piston, 4 Sets are needed to rebuild all pistons.
Piston Kit (Standard Size)
Standard Size Piston with Piston Pin and Piston Pin Clips (pr.) Piston OEM Ref. # 13101-300-030 (Std.) Japanese made Superior Quality Note:This Kit includes piston, piston pin and clips to rebuild one piston (Piston Rings NOT included), 4 Kits are needed to rebuild all pistons.
Piston Kit - 1st. Oversize (+0.25mm)
1st Oversize Piston with Piston Pin and Piston Pin Clips (Pr.) Piston OEM Ref. # 13102-300-030 (1st Oversize) Japanese made Superior Quality Note:This Kit includes piston, piston pin and clips to rebuild one piston (Piston Rings NOT included), 4 Kits are needed to rebuild all pistons.
Piston Kit - 2nd Oversize (+0.50mm.)
2nd. Oversize Piston with Piston Pin and Piston Pin Clips (pr.) Piston OEM Ref. # 13103-300-030 (2nd Oversize) Japanese made Superior Quality Note: This Kit includes piston, piston pin and clips to rebuild one piston (Piston Rings NOT included), 4 Kits are needed to rebuild all pistons.
Piston Pin
Piston Pin - OEM Ref. # 13111-300-000 Japanese made Superior Quality
Piston Pin Clips
Piston Pin Clips, 15mm (Pk/2) - Japanese made Superior Quality OEM Ref. # 94601-15000
Cam Roller Pin
Cam Roller Pin - Replaces OEM # 14605-286-020
Cam Shaft Roller Collar
Cam Shaft Roller Collar - Replaces OEM # 14606-286-000
Rubber Cushion for Cam Chain Roller Shaft
Cam Roller Shaft Rubber (Pk/2) - Replaces OEM # 14607-300-000
Cam Chain Guide
Cam Chain Guide - Replaces OEM # 14611-300-000
Cam Chain Guide Pin
Cam Chain Guide Pin OEM Ref # 14612-286-000
Ignition Coil Bracket Set
Ignition Coil Bracket Set. Replaces OEM# 30511-300-000 Features a high grade polished finish and includes coil mounting hardware.
Kick Stand Stopper Rubber
Kick Stand Stopper Rubber "A" - Replaces OEM# 95011-61000.
Exhaust Pipe Flange
Exhaust Pipe Flange. This Flange is used with the Stock Type Mufflers. Replaces OEM # 18236-300-030 Note: Each Bike Require 4 Exhaust Pipe Flanges (One per Muffler). Order the Quantity you Require.
Exhaust Flange Bolt (Set/2)
Exhaust Pipe Flange Bolt (Set/2 Bolts). These Bolts are for the Exhaust Flanges Used when Installing Exhaust. Replace OEM # 93600-08022 Note: Each Bolt Set Includes 2 Bolts (Enough for One Flange). Order the Quantity of Bolt Sets you Require.
Exhaust Flange Clamp with Bolt ~ Right Side
Chrome Exhaust Flange Clamp with Bolt for One of the Stock Type Mufflers on the Right Side of the Bike. Replaces OEM # 18231-300-010 Fits: Honda CB750K (1971-76) Right Side Muffler Note: Each Bike Requires 2 Right Side Exhaust Flange Clamps(One per Muffler). Order the Quantity you Require.
Exhaust Flange Clamp with Bolt ~ Left Side
Chrome Exhaust Flange Clamp with Bolt for One of the Stock Type Mufflers on the Left Side of the Bike. Replaces OEM # 18232-300-010 Fits: Honda CB750K (1971-76) Left Side Muffler Note: Each Bike Requires 2 Left Side Exhaust Flange Clamps(One per Muffler). Order the Quantity you Require.
Exhaust Flange Clamp Bolt
Exhaust Flange Clamp Bolt. Used to Fasten the Stock Type Exhaust Flange Clamps. Replaces OEM # 92101-08032-0B Note: Each Bike Requires 4 Exhaust Flange Clamp Bolts (One per Exhaust Flange Clamp). Order the Quantity you Require.
Headlight Case Collar
Headlight Case Collar, Replaces OEM# 61302-300-000 This is the collar that goes in each side of the stock headlight case. Sold Each, order the quantity you require
Headlight Setting Collar
Headlight Setting Collar, Replaces OEM# 61304-292-000 Sold Each, order the quantity you require
Matte Black ~ OEM Type Gas/Fuel Tank Cap With Latch Assembly
Matte Black OEM Type Gas/Fuel Tank Cap with Gasket, Hinge Pin (with E-Clip which Allows for easy installation) and Gas/Fuel Tank Cap Latch Assembly, Includes Latch, Return Spring, Latch Mounting Pin and C-Clip. Replaces OEM # 17510-323-310
Front Brake Pipe "B"
Front Brake Pipe "B" - Replaces OEM# 45128-341-670 Aprox 7.5" Total Length.