HondaCB750K ► 

Refine Search Results
Honda CB750K Oil Filter
USD$ 5.00
Fits: CB750K (69-82)

Oil Filter

#15-0002 | Honda CB750K (1969-1982)

Oil Filter OEM Ref # 15410-426-010 / 15410-422-004 / 16099-003 / 36Y-13441-00 Note: If you require new oil filter o-rings, springs or washers we sell these on our site as well

Honda CB750K Oil Filter Spring
USD$ 2.00
Fits: CB750K (69-82)

Oil Filter Spring

#15-0055 | Honda CB750K (1969-1982)

Oil Filter Spring, Replaces OEM # 15415-300-000

Honda CB750K Oil Filter Bolt
USD$ 14.00
Fits: CB750K (69-82)

Oil Filter Bolt

#15-3020 | Honda CB750K (1969-1982)

Oil Filter Bolt OEM Ref # 15420-300-020

Honda CB750K Chrome Spin On Oil Filter
USD$ 22.00
Fits: CB750K (69-82)

Chrome Spin On Oil Filter

#15-1006 | Honda CB750K (1969-1982)

Chrome Spin On Oil Filter Replaces Stock OEM Housing, Filter Bolt and Paper Element Filter.

Honda CB750K Oil Filter O-Ring Set
USD$ 2.50
Fits: CB750K (69-82)

Oil Filter O-Ring Set

#15-0050 | Honda CB750K (1969-1982)

Oil Filter O-Ring Set Fits Oil Filter - 15410-426-005 / 15410-426-010

Honda CB750K Oil Pump Strainer Screen
USD$ 25.00
Fits: CB750K (69-78)

Oil Pump Strainer Screen

#73-0083 | Honda CB750K (1969-1978)

Oil Pump Strainer Screen, Replaces OEM # 15150-300-000

Honda CB750K Round Pod Air Filter ~ Black/Red
USD$ 16.00
Fits: CB750K (69-76)

Round Pod Air Filter ~ Black/Red

#15-0020-A | Honda CB750K (1969-1976)

39mm Round Pod Air Filter ~ Black Body with Red Foam Filter - Circular style with Black end cap. Provides for greater air flow, especially when using an aftermarket exhaust and has improved flow characteristics compared to the plain wire type mesh Pod filters. Filter is supplied dry but washable filtration material may be oiled for improved dust filtration.

Honda CB750K Round Pod Air Filter ~ Black/Red
USD$ 16.00
Fits: CB750K (79-82)

Round Pod Air Filter ~ Black/Red

#15-0021 | Honda CB750K (1979-1982)

54mm Round Pod Air Filter ~ Black Body with Red Foam Filter - Circular style with Black end cap. Provides for greater air flow, especially when using an aftermarket exhaust and has improved flow characteristics compared to the plain wire type mesh Pod filters. Filter is supplied dry but washable filtration material may be oiled for improved dust filtration.

Honda CB750K Oil Drain Plug
USD$ 8.00
Fits: CB750K (79-82)

Oil Drain Plug

#15-0014 | Honda CB750K (1979-1982)

Magnetic Oil Drain Plug 14mm Diameter 1.5 Thread Pitch OEM Ref # 92800-14000 / 90101-14259-00

Honda CB750K Oil Drain Plug
USD$ 9.00
Fits: CB750K (69-78)

Oil Drain Plug

#15-0016 | Honda CB750K (1969-1978)

Magnetic Oil Drain Plug 12mm Diameter 1.50 Thread Pitch OEM Ref # 92800-12000 / 92066-1174 / 01107-12208

Honda CB750K Oil Pump Gasket
USD$ 3.00
Fits: CB750K (69-78)

Oil Pump Gasket

#18-7008 | Honda CB750K (1969-1978)

Oil Pump Gasket - OEM Ref. # 15135-300-010

Honda CB750K Oil Pan Gasket
USD$ 10.00
Fits: CB750K (79-82)

Oil Pan Gasket

#18-7053 | Honda CB750K (1979-1982)

Oil Pan Gasket - OEM Ref.# 11398-425-000

Honda CB750K Oil Pressure Switch
USD$ 16.00
Fits: CB750K (69-82)

Oil Pressure Switch

#73-0825 | Honda CB750K (1969-1982)

Oil Pressure Switch, Replaces OEM # 37240-P13-013

Honda CB750K Kickstart Oil Seal
USD$ 3.50
Fits: CB750K (69-78)

Kickstart Oil Seal

#73-0962 | Honda CB750K (1969-1978)

Kickstart Oil Seal - 18 x 29 x 7 - Replaces OEM # 91204-286-003

Honda CB750K Countershaft Oil Seal
USD$ 15.00
Fits: CB750K (79-82)

Countershaft Oil Seal

#73-0969 | Honda CB750K (1979-1982)

Countershaft Oil Seal - 40 x 62 x 13.5 - Replaces OEM # 91205-425-003

Honda CB750K Oil Tube Plug
USD$ 8.50
Fits: CB750K (71-78)

Oil Tube Plug

#73-1008 | Honda CB750K (1971-1978)

Oil Tube Plug, Replaces OEM # 15337-300-010

Honda CB750K Air Filter
USD$ 15.00
Fits: CB750K (69-78)

Air Filter

#15-0060 | Honda CB750K (1969-1978)

Air Filter OEM Ref # 17211-405-000

Honda CB750K Air Filter
USD$ 14.00
Fits: CB750K (79-82)

Air Filter

#15-0069 | Honda CB750K (1979-1982)

Air Filter OEM Ref # 17211-425-000

Honda CB750K Engine Oil Seal Kit
USD$ 30.35
Fits: CB750K (69-78)

Engine Oil Seal Kit

#01-9018 | Honda CB750K (1969-1978)

Engine Oil Seal Kit

Honda CB750K Engine Oil Seal Kit
USD$ 30.36
Fits: CB750K (79-82)

Engine Oil Seal Kit

#01-9034 | Honda CB750K (1979-1982)

6 pc. Engine Oil Seal Kit, Superior OEM Quality, Made in Japan

Honda CB750K Engine Oil Seal Kit
USD$ 22.76
Fits: CB750K (77-78)

Engine Oil Seal Kit

#01-9042 | Honda CB750K (1977-1978)

7 pc. Engine Oil Seal Kit, Superior OEM Quality - Made in Japan Fits: Honda CB750K (1977-78), CB750F (1977-78) Supersport 1 pc. 91205-405-005 / 91205-405-000 Countershaft sprocket oil seal - 29.8 x 62 x 7 1 pc. 91202-216-000 / 91202-302-010 Clutch arm seal - SB type - 14 x 24 x 5 1 pc. 91206-286-005 / 91206-286-013 / 91206-286-003 Shift shaft seal - 14 x 28x 7 1 pc. 91201-300-003 Crank seal 30 x 42 x 8 1 pc. 91215-300-003 Seal - Starting clutch gear - 25 x 33 x 4 1 pc. 91204-286-003 / 91204-286-005 Kickstart Oil Seal 18 x 29 x 7 1 pc. 91211-286-003 Tach drive oil seal 4.8 x 14.5 x 4

Honda CB750K Oil Pan Gasket (Late)
USD$ 11.00
Fits: CB750K (70-78)

Oil Pan Gasket (Late)

#18-7004 | Honda CB750K (1970-1978)

Oil Pan Gasket (Late Type) - OEM Ref. # 11398-300-303

Honda CB750K Oil Pan Gasket (Early)
USD$ 6.50
Fits: CB750K (69)

Oil Pan Gasket (Early)

#18-7012 | Honda CB750K (1969)

Oil Pan Gasket (Early Type), OEM Reference # 11398-300-030 ONLY FITS: Honda CB750K (1969) to engine # 1007414

Honda CB750K Oil Tank Cap with Dipstick
USD$ 40.00
Fits: CB750K (69-76)

Oil Tank Cap with Dipstick

#73-0053 | Honda CB750K (1969-1976)

Chrome Oil Tank Cap/Dipstick Assembly with Gasket. Replaces OEM # 55105-300-010

Honda CB750K Oil Tank Rubber Set
USD$ 9.50
Fits: CB750K (69-78)

Oil Tank Rubber Set

#73-0081 | Honda CB750K (1969-1978)

Oil Tank Rubber Set (3 Rubbers). These are the 3 Rubbers that Attach to the 2 Top Corners and Bottom of the Oil Tank. Replace OEM # 55106-300-000

Honda CB750K Oil Dipstick with O-Ring
USD$ 28.00
Fits: CB750K (77-78)

Oil Dipstick with O-Ring

#73-0082 | Honda CB750K (1977-1978)

Oil Dipstick with O-Ring. Replaces OEM # 55105-392-000 (Dipstick) and 91354-371-000 (O-Ring).

Honda CB750K Countershaft Sprocket Oil Seal
USD$ 13.00
Fits: CB750K (69-76)

Countershaft Sprocket Oil Seal

#73-0956 | Honda CB750K (1969-1976)

Countershaft Sprocket Oil Seal - 25 x 62 x 8 - Replaces OEM # 91205-300-005

Honda CB750K Countershaft Sprocket Oil Seal
USD$ 20.00
Fits: CB750K (77-78)

Countershaft Sprocket Oil Seal

#73-0957 | Honda CB750K (1977-1978)

Countershaft Sprocket Oil Seal - 29.8 x 62 x 7 - Replaces OEM # 91205-405-005

Honda CB750K Tach Drive Oil Seal
USD$ 3.50
Fits: CB750K (69-78)

Tach Drive Oil Seal

#73-0963 | Honda CB750K (1969-1978)

Tach Drive Oil Seal - 4.8 x 14.5 x 4 - Replaces OEM # 91256-096-651

Honda CB750K Tach Drive Oil Seal
USD$ 4.50
Fits: CB750K (79-82)

Tach Drive Oil Seal

#73-0964 | Honda CB750K (1979-1982)

Tach Drive Oil Seal - 4.8 x 14.5 x 5 - Replaces OEM # 91256-425-003

Honda CB750K Clutch Arm Oil Seal
USD$ 4.00
Fits: CB750K (79-82)

Clutch Arm Oil Seal

#73-0965 | Honda CB750K (1979-1982)

Clutch Arm Oil Seal - 10 x 16 x 4.5 - Replaces OEM # 91259-VM0-000

Honda CB750K Oil Pump Shaft Seal
USD$ 12.00
Fits: CB750K (79-82)

Oil Pump Shaft Seal

#73-0967 | Honda CB750K (1979-1982)

Oil Pump Shaft Seal - 25 x 47 x 10 - Replaces OEM # 91257-425-013

Honda CB750K Shift Shaft Oil Seal
USD$ 4.50
Fits: CB750K (79-82)

Shift Shaft Oil Seal

#73-0968 | Honda CB750K (1979-1982)

Shift Shaft Oil Seal - 12.5 x 25 x 8 - Replaces OEM # 91204-425-003

Honda CB750K Oil Pump Rebuild Kit
USD$ 35.00
Fits: CB750K (69-78)

Oil Pump Rebuild Kit

#73-1053 | Honda CB750K (1969-1978)

11 Pc. Oil Pump Rebuild Kit. Use this kit to get your oil pump flowing at maximum capacity for a healthy engine, performing at it's best! Kit includes 1 oil stopper seal, 1 oil stopper spring, 1 oil relief valve spring, 1 oil relief valve o-ring, 3 pump connection o-rings, 2 inner rotor o-rings, 1 steel reinforced center shaft seal, 1 pump body gasket.

Honda CB750K Economy Engine Oil Seal Kit
USD$ 13.64
Fits: CB750K (77-78)

Economy Engine Oil Seal Kit

#01-0150 | Honda CB750K (1977-1978)

7 pc. Engine Oil Seal Kit. 1 pc. 91205-405-005 / 91205-405-000 Countershaft sprocket oil seal - 30 x 62 x 7/8 1 pc. 91202-216-000 / 91202-302-010 Clutch arm seal - SB type - 13.8 x 24 x 5 1 pc. 91206-286-005 / 91206-286-013 / 91206-286-003 Shift shaft seal - 14 x 28 x 7 1 pc. 91201-300-003 Crank seal 30 x 42 x 8 1 pc. 91215-300-003 Seal - Starting clutch gear - 25 x 33 x 4 1 pc. 91204-286-003 / 91204-286-005 Kickstart Oil Seal 18 x 29 x 7 1 pc. 91211-286-003 Tach drive oil seal 4.8 x 14.5 x 4

Honda CB750K Economy Engine Oil Seal Kit
USD$ 14.40
Fits: CB750K (69-76)

Economy Engine Oil Seal Kit

#01-0157 | Honda CB750K (1969-1976)

7 pc. Engine Oil Seal Kit 1 pc. 91205-300-005 Countershaft sprocket oil seal 25 x 62 x 7.8 1 pc. 91202-216-000 / 91202-302-010 Clutch arm seal - SB type - 13.7 x 24 x 5 1 pc. 91206-286-005 / 91206-286-013 / 91206-286-003 Shift shaft seal - 14 x 28 x 7 1 pc. 91201-300-003 Crank seal 30 x 42 x 8 1 pc. 91215-300-003 Seal - Starting clutch gear - 25 x 33 x 4 1 pc. 91204-286-003 / 91204-286-005 Kickstart Oil Seal 18 x 29 x 7 1 pc. 91211-286-003 Tach drive oil seal 4.8 x 14.5 x 4

Honda CB750K Oil Pressure Switch Wire Assembly
USD$ 27.00
Fits: CB750K (69-78)

Oil Pressure Switch Wire Assembly

#24-4020 | Honda CB750K (1969-1978)

Oil Pressure Switch Wire Assembly. Includes the Wire and Rubber Cover. Replaces OEM # 31270-300-154 / 31270-300-005

Honda CB750K Oil Passage Cap with O-Ring
USD$ 26.00
Fits: CB750K (69-82)

Oil Passage Cap with O-Ring

#73-0077 | Honda CB750K (1969-1982)

Oil Passage Cap with O-Ring. Replaces OEM # 15331-300-000 (Oil Passage Cap) and OEM # 94608-40000 (O-Ring). Note: Sold Each, Order the Quantity of Caps you Require

Honda CB750K Oil Pressure Gauge Assembly ~ Black Face Plate
USD$ 70.00
Fits: CB750K (69-78)

Oil Pressure Gauge Assembly ~ Black Face Plate

#23-3125 | Honda CB750K (1969-1978)

Oil Pressure Gauge Assembly. Includes a silver colored liquid filled gauge with a black face plate, (44mm) diameter, 0 to 100 PSI. Billet aluminum oil galley adapter, o-ring and a chrome 90° fitting included. Easily installs on the oil gally port above the points cover in minutes!

Honda CB750K Oil Pressure Gauge Assembly ~ White Face Plate
USD$ 70.00
Fits: CB750K (69-78)

Oil Pressure Gauge Assembly ~ White Face Plate

#23-3126 | Honda CB750K (1969-1978)

Oil Pressure Gauge Assembly. Includes a silver colored liquid filled gauge with a white face plate, (44mm) diameter, 0 to 100 PSI. Billet aluminum oil galley adapter, o-ring and a chrome 90° fitting included. Easily installs on the oil gally port above the points cover in minutes!

Honda CB750K Oil Pressure Gauge Assembly ~ Carbon Face Plate
USD$ 70.00
Fits: CB750K (69-78)

Oil Pressure Gauge Assembly ~ Carbon Face Plate

#23-3127 | Honda CB750K (1969-1978)

Oil Pressure Gauge Assembly. Includes a silver colored liquid filled gauge with a carbon looking face plate, (44mm) diameter, 0 to 100 PSI. Billet aluminum oil galley adapter, o-ring and a chrome 90° fitting included. Easily installs on the oil gally port above the points cover in minutes!

Honda CB750K Oil Pressure Gauge Assembly ~ Metal Machined Face Plate
USD$ 70.00
Fits: CB750K (69-78)

Oil Pressure Gauge Assembly ~ Metal Machined Face Plate

#23-3128 | Honda CB750K (1969-1978)

Oil Pressure Gauge Assembly. Includes a silver colored liquid filled gauge with a metal machined design looking face plate, (44mm) diameter, 0 to 100 PSI. Billet aluminum oil galley adapter, o-ring and a chrome 90° fitting included. Easily installs on the oil gally port above the points cover in minutes!

Honda CB750K Oil Pressure Gauge Assembly ~ Silver ~ Joker Machine
USD$ 100.00
Fits: CB750K (69-76)

Oil Pressure Gauge Assembly ~ Silver ~ Joker Machine

#73-1067 | Honda CB750K (1969-1976)

Joker Machine Brand ~ Oil Pressure Gauge Assembly. Silver Colored Mount Assembly with a Silver Colored Stainless Steel Marshall liquid filled gauge 1 1/2" (38mm) diameter, 0 to 100 PSI. Easily installs on the oil gally port above the points cover in minutes! Features 2 built-in Neoprene rubber o-rings recessed in 2 fittings that have a unique rotating section that enables you to easily position the gauge for perfect rider visability. Just loosen the billet hex fitting, rotate into position, then tighten. High quality made in the U.S.A

Honda CB750K Custom Oil Tank Dipstick Cap ~ Joker Machine
USD$ 45.00
Fits: CB750K (69-76)

Custom Oil Tank Dipstick Cap ~ Joker Machine

#73-1068 | Honda CB750K (1969-1976)

Joker Machine Brand ~ Custom Oil Tank Dipstick Cap, Replaces OEM # 55105-300-010 Features cool looking and easy to turn finger indents along the perimeter. High quality CNC machined cover made in the U.S.A.

Honda CB750K Custom Performance Magnetic Oil Drain Plug ~ Joker Machine
USD$ 30.00
Fits: CB750K (69-78)

Custom Performance Magnetic Oil Drain Plug ~ Joker Machine

#73-1074 | Honda CB750K (1969-1978)

Joker Machine Brand ~ Custom Performance Magnetic Oil Drain Plug - 12mm. Dia x M1.5 - OEM Ref # 92800-12000 Plug features an extended length HIGH POWER "rare earth" Neodymium-Iron-Boron Magnet pressed into the body which grabs steel debris from your tank and motor exceptionally well! High Quality CNC machined part made in the U.S.A. Works on the oil tank drain (right side of bike) and on the oil pan drain (beneath the engine) - use two for the ultimate engine oil debris collection set-up.

Honda CB750K Oil Pressure Gauge Assembly ~ Black ~ Joker Machine
USD$ 100.00
Fits: CB750K (69-76)

Oil Pressure Gauge Assembly ~ Black ~ Joker Machine

#73-1158 | Honda CB750K (1969-1976)

Joker Machine Brand ~ Oil Pressure Gauge Assembly. Black Colored Mount Assembly with a Silver Colored Stainless Steel Marshall liquid filled gauge 1 1/2" (38mm) diameter, 0 to 100 PSI. Easily installs on the oil gally port above the points cover in minutes! Features 2 built-in Neoprene rubber o-rings recessed in 2 fittings that have a unique rotating section that enables you to easily position the gauge for perfect rider visibility. Just loosen the billet hex fitting, rotate into position, then tighten. High quality made in the U.S.A

Honda CB750K Shift Shaft Seal
USD$ 3.50
Fits: CB750K (69-78)

Shift Shaft Seal

#73-0959 | Honda CB750K (1969-1978)

Shift Shaft Seal - 14 x 28 x 7 - Replaces OEM # 91206-286-013

Honda CB750K Crank Seal
USD$ 7.00
Fits: CB750K (69-78)

Crank Seal

#73-0960 | Honda CB750K (1969-1978)

Crank Seal - 30 x 42 x 8 - Replaces OEM # 91201-300-003 Note: Please Reference the OEM Number and Seal size above to make sure this is the Crank Seal you Require. Some models use 2 Different Crank Seals.

Honda CB750K Starting Clutch Gear Seal
USD$ 6.00
Fits: CB750K (69-78)

Starting Clutch Gear Seal

#73-0961 | Honda CB750K (1969-1978)

Starting Clutch Gear Seal - 25 x 33 x 4 - Replaces OEM # 91215-300-003

Honda CB750K Crank Seal
USD$ 8.50
Fits: CB750K (79-82)

Crank Seal

#73-0966 | Honda CB750K (1979-1982)

Crank Seal - 25 x 42 x 8 - Replaces OEM # 91201-425-003

The names Honda, Yamaha, Kawasaki, Suzuki and any other trade names or symbols belonging to each respective corporation are stated for reference purposes only. The products on this site are after market (not OEM) replacement parts and accessories only. We have no relationship to the listed companies.