HondaCD175 ► 

Refine Search Results
Honda CD175 Metric Pin Punch Set
USD$ 16.25
Out of Stock
Email Me When Available

Metric Pin Punch Set

#35-9050

Metric Pin Punch Set 8 Pc Set Includes 1.5mm, 2mm, 3mm, 4mm, 5mm, 5.5mm, 6mm & 8mm

USD$ 16.25
Out of Stock
Email Me When Available
Honda CD175 Clutch Holding Tool
USD$ 22.15

Clutch Holding Tool

#35-9052

Clutch Holding Tool Adjustable Vise Grip Style Clutch Basket & Sprocket Holder Tool

USD$ 22.15
Honda CD175 Black Hand Guard Set
USD$ 29.55

Black Hand Guard Set

#35-9056

Black Hand Guard Set with hardware. Attaches to the handlebars to protect your hands during riding.

USD$ 29.55
Honda CD175 Wheel Weight Wrench
USD$ 8.85

Wheel Weight Wrench

#35-9059

Wheel Weight Wrench Tool for installing and removing spoke or mag type wheel weights.

USD$ 8.85
Honda CD175 Image Scope
SALE: USD$ 59.95
(USD$ 102.85)

Image Scope

#35-9096

Professional Flexible Fiber Optic Image Scope for inspecting engine internal parts. 18" long wand with a 6mm (1/4") OD tip. Image resolution is 7,400 pixels. Packed in a blow mold case with handle jacket and extra Xenon Bulbs and 2 AA batteries.

SALE: USD$ 59.95
(USD$ 102.85)
Honda CD175 Chain Breaker
USD$ 16.25

Chain Breaker

#35-9100

Chain Breaker Folding Handle & Heat Treated Pin Breaks 420/520/530 Chain

USD$ 16.25
Honda CD175 T-Handle Wrench Set
USD$ 25.85

T-Handle Wrench Set

#35-9101

T-Handle Wrench Set 7 Pc Set Includes 8, 10, 12, 14 & 17mm 6 Point Socket Wrenches & Phillips #2 & #3 Screwdriver Tips.

USD$ 25.85
Honda CD175 Oil / Fluid Container ~ 4 Liter
USD$ 12.55

Oil / Fluid Container ~ 4 Liter

#35-9104

4 Liter Oil / Fluid Container with Long Spout.

USD$ 12.55
Honda CD175 Shock Pump
USD$ 23.65
Out of Stock
Email Me When Available

Shock Pump

#35-9107

Shock Pump 300 PSI Rear Shocks Or Front Fork Suspensions

USD$ 23.65
Out of Stock
Email Me When Available
Honda CD175 Deluxe Shock Preload Adjusting Tool
USD$ 8.10

Deluxe Shock Preload Adjusting Tool

#35-9108

Deluxe Shock Preload Adjusting Tool. This tool helps to adjust shock preload without damaging the shock spring collars. It fits 35mm to 75mm spring collars. Fits: Our shock sets and many other aftermarket shocks.

USD$ 8.10
Honda CD175 Deluxe Fork Seal Driver Set
USD$ 221.95

Deluxe Fork Seal Driver Set

#35-9109

Deluxe Fork Seal Driver Set. This set includes 9 high quality carbon steel fork seal drivers with split design. Use these for easy installation of most fork seals on either conventional or inverted forks. Set Contains plastic storage case and the following drivers. -35/36mm driver -39mm driver -41mm driver -43mm driver -45mm driver -46/47mm driver -48mm driver -49/50mm driver -54mm driver

USD$ 221.95
Honda CD175 Carb Cleaning Tool Set
USD$ 8.10

Carb Cleaning Tool Set

#35-9110

Carburetor Cleaning Tool Set. Includes 20 steel wire ends designed for cleaning the tiny holes found in carburetor jets. Cleaning wire sizes range from 0.45mm to 1.5mm.

USD$ 8.10
Honda CD175 Piston Ring Tool
USD$ 16.25

Piston Ring Tool

#35-9112

Piston Ring Tool with plastic storage case. This tool is designed to prevent ring breakage during cylinder installation. This tool can be easily removed after cylinder is in position. Comes with 4 rings to accept the smallest triple to the largest single cylinder engines. Fits 40-85mm sizes.

USD$ 16.25
Honda CD175 Fork Cap Wrench ~ 35MM Size
USD$ 4.40

Fork Cap Wrench ~ 35MM Size

#35-9113

Fork Cap Wrench ~ 35MM Size. This is a non-marring fork cap wrench that fits all motorcycles with 35MM fork caps. This wrench will allow you to remove your fork caps without worrying about damaging them.

USD$ 4.40
Honda CD175 Fork Cap Wrench ~32MM Size
USD$ 4.40

Fork Cap Wrench ~32MM Size

#35-9114

Fork Cap Wrench ~ 32MM Size. This is a non-marring fork cap wrench that fits all motorcycles with 32MM fork caps. This wrench will allow you to remove your fork caps without worrying about damaging them.

USD$ 4.40
Honda CD175 Fork Cap Wrench ~30MM Size
USD$ 4.40

Fork Cap Wrench ~30MM Size

#35-9115

Fork Cap Wrench ~ 30MM Size. This is a non-marring fork cap wrench that fits all motorcycles with 30MM fork caps. This wrench will allow you to remove your fork caps without worrying about damaging them.

USD$ 4.40
Honda CD175 Fork Cap Wrench ~24MM Size
USD$ 4.40

Fork Cap Wrench ~24MM Size

#35-9116

Fork Cap Wrench ~ 24MM Size. This is a non-marring fork cap wrench that fits all motorcycles with 24MM fork caps. This wrench will allow you to remove your fork caps without worrying about damaging them.

USD$ 4.40
Honda CD175 Fluid Hose Clamp
USD$ 5.55

Fluid Hose Clamp

#35-9117

Fluid Hose Clamp, all steel construction with adjustable locking collar. Completely or partially closes flexible brake, fuel, and vacuum fluid lines.

USD$ 5.55
Honda CD175 Portable Auxiliary Fuel Tank Tool
USD$ 36.95

Portable Auxiliary Fuel Tank Tool

#35-9120

Portable Auxiliary Fuel Tank, for Non Fuel Injection Systems. Includes 4 Feet of 1/4" fuel line and an inline fuel valve with 1/4" inlet and outlet. Fuel capacity 2 Litres. For use when tuning a motorcycle with the gas tank removed. Note: This tool is not to be used for long term fuel storage, for safety and to prevent accidental spillage, immediately drain gas back to approved long term storage container after use.

USD$ 36.95
Honda CD175 Rotor and Sprocket Holder
USD$ 22.15

Rotor and Sprocket Holder

#35-9121

Rotor and Sprocket Holder. Keeps rotors, flywheels and sprockets from rotating during removal and installation. The adjustable stop-screw keeps the tool open at a set distance. Holds sprockets and rotors with holes center to center at a minimum distance of 13mm and a maximum distance of 230mm's.

USD$ 22.15
Honda CD175 Bearing Packer
USD$ 23.65

Bearing Packer

#35-9122

Wheel Bearing Grease Packer. To pack a bearing, place the bearing on the piston, press down on the cap until the old grease is forced out and the new grease shows on top of the bearing. Grease stays in the tool cavity, not on your hands. Transparent, impact resistant cup allows easy grease level checks. Works on bearings up to 3-1/2" OD or 89mm.

USD$ 23.65
Honda CD175 Steering Race Remover 25-35mm
USD$ 22.15

Steering Race Remover 25-35mm

#35-9123

Steering Head Bearing Race Remover, Range 25-35mm ID. This tool will assist in removing motorcycle steering head bearing races. The size range is from 25mm to 35mm inside diameter. Can be driven with any hammer or mallet. Slips in the headtube solid end first until it snaps in behind the bearing race, then simply drive the race out of the frame.

USD$ 22.15
Honda CD175 Steering Race Remover 35-55mm
USD$ 22.15

Steering Race Remover 35-55mm

#35-9124

Steering Head Bearing Race Remover, Range 35-55mm ID. This tool will assist in removing motorcycle steering head bearing races. The size range is from 35mm to 55mm inside diameter. Can be driven with any hammer or mallet. Slips in the headtube solid end first until it snaps in behind the bearing race, then simply drive the race out of the frame.

USD$ 22.15
Honda CD175 Carb Cleaning Tool Set
USD$ 8.85

Carb Cleaning Tool Set

#35-9125

Carburetor Cleaning Tool Set. Includes 12 steel wire ends and a small file designed for cleaning nozzles and the tiny holes found in carburetor passages and jets.

USD$ 8.85
Honda CD175 Aluminum Timing Degree Wheel
USD$ 19.95

Aluminum Timing Degree Wheel

#35-9126

Aluminum Timing Degree Wheel 7" Diameter with Large Visible Markings. This Tool Allows for Extremely Accurate Marking which Makes Getting the Timing Right the First Time a Breeze! Lightweight and Durable Tool. This Tool Can be used for Crankshaft Positioning, Ignition and Camshaft Timing.

USD$ 19.95
Honda CD175 Swing Arm / Rising Rate Linkage Bearing Install Tool
USD$ 25.00

Swing Arm / Rising Rate Linkage Bearing Install Tool

#35-9128

Swing Arm / Rising Rate Linkage Bearing Install Tool Designed for installation of the swingarm bearings on late-model Japanese off-road motorcycles. Puller draws bearing into the swingarm. Includes three drivers for use with common bearing sizes Kit includes driver sizes: I.D. 20mm / O.D 26mm, I.D. 21mm / O.D. 26mm & I.D. 22mm / O.D.26.8mm

USD$ 25.00
Honda CD175 Handlebar Top Clamp
USD$ 17.00

Handlebar Top Clamp

#37-0002

Handlebar Top Clamp Chrome Custom Handlebar Top Clamp with Plated Allen Socket bolts. Mounting Holes center to center length 100mm, center to center height 35mm.

USD$ 17.00
Honda CD175 Carburetor Synchronizer Vacuum Gauge ~ 2 Carb Synchronizer
USD$ 36.95

Carburetor Synchronizer Vacuum Gauge ~ 2 Carb Synchronizer

#37-0003

Carburetor and throttle body synchronizer kit for bikes with 2 Carbs. Makes synching your carburetor setup fast and easy! For use with Honda, Kawasaki, and Suzuki models (which typically have 5mm connections) that use sets of 2 carbs. Includes 2 easy to read gauges, Mountable bracket, 180mm extensions - 5mm threads, 65mm extensions - 5mm threads,Necessary hoses, Dampening valves (included to help control needle jump) and instructions.

USD$ 36.95
Honda CD175 Socket Head Cap Screw Pk/10
USD$ 2.85

Socket Head Cap Screw Pk/10

#49-0027

Socket Head Cap Screw Pk/10 Zinc Finish Size: 6 x 15mm

USD$ 2.85
Honda CD175 Socket Head Cap Screw
USD$ 3.40

Socket Head Cap Screw

#49-0028

Socket Head Cap Screw Pk/10 Zinc Finish Size: 6 x 20mm

USD$ 3.40
Honda CD175 Socket Head Cap Screw
USD$ 3.45

Socket Head Cap Screw

#49-0030

Socket Head Cap Screw Pk/10 Zinc Finish Size: 6 x 25mm

USD$ 3.45
Honda CD175 Socket Head Cap Screw
USD$ 4.00

Socket Head Cap Screw

#49-0031

Socket Head Cap Screw Pk/10 Zinc Finish Size: 6 x 30mm

USD$ 4.00
Honda CD175 Socket Head Cap Screw
USD$ 4.20

Socket Head Cap Screw

#49-0032

Socket Head Cap Screw Pk/10 Zinc Finish Size: 6 x 35mm

USD$ 4.20
Honda CD175 Socket Head Cap Screw
USD$ 4.05

Socket Head Cap Screw

#49-0033

Socket Head Cap Screw Pk/10 Zinc Finish Size: 6 x 40mm

USD$ 4.05
Honda CD175 Socket Head Cap Screw
USD$ 4.40
Out of Stock
Email Me When Available

Socket Head Cap Screw

#49-0035

Socket Head Cap Screw Pk/10 Zinc Finish Size: 6 x 50mm

USD$ 4.40
Out of Stock
Email Me When Available
Honda CD175 Socket Head Cap Screw
USD$ 5.15

Socket Head Cap Screw

#49-0036

Socket Head Cap Screw Pk/10 Zinc Finish Size: 6 x 55mm

USD$ 5.15
Honda CD175 Chrome ~ Phillips Head Screw (Pk/2)
USD$ 0.35

Chrome ~ Phillips Head Screw (Pk/2)

#49-0050

Phillips Head Screw Pk/2 Chrome Plated Size: 6 x 28mm

USD$ 0.35
Honda CD175 Phillips Head Screw
USD$ 2.10

Phillips Head Screw

#49-0051

Phillips Head Screw Pk/10 Steel Plated Size: 6 x 16mm

USD$ 2.10
Honda CD175 Phillips Head Screw
USD$ 2.20

Phillips Head Screw

#49-0052

Phillips Head Screw Pk/10 Steel Plated Size: 6 x 18mm

USD$ 2.20
Honda CD175 Phillips Head Screw
USD$ 2.20

Phillips Head Screw

#49-0053

Phillips Head Screw Pk/10 Steel Plated Size: 6 x 20mm

USD$ 2.20
Honda CD175 Phillips Head Screw
USD$ 2.30

Phillips Head Screw

#49-0055

Phillips Head Screw Pk/10 Steel Plated Size: 6 x 25mm

USD$ 2.30
Honda CD175 Phillips Head Screw
USD$ 2.40

Phillips Head Screw

#49-0056

Phillips Head Screw Pk/10 Steel Plated Size: 6 x 30mm

USD$ 2.40
Honda CD175 Phillips Head Screw
USD$ 2.70

Phillips Head Screw

#49-0057

Phillips Head Screw Pk/10 Steel Plated Size: 6 x 35mm

USD$ 2.70
Honda CD175 Phillips Head Screw
USD$ 2.80

Phillips Head Screw

#49-0058

Phillips Head Screw Pk/10 Steel Plated Size: 6 x 40mm

USD$ 2.80
Honda CD175 Phillips Head Screw
USD$ 2.95

Phillips Head Screw

#49-0059

Phillips Head Screw Pk/10 Steel Plated Size: 6 x 45mm

USD$ 2.95
Honda CD175 Phillips Head Screw
USD$ 3.05

Phillips Head Screw

#49-0060

Phillips Head Screw Pk/10 Steel Plated Size: 6 x 50mm

USD$ 3.05
Honda CD175 Phillips Head Screw
USD$ 3.15

Phillips Head Screw

#49-0061

Phillips Head Screw Pk/10 Steel Plated Size: 6 x 55mm

USD$ 3.15
Honda CD175 Phillips Head Screw
USD$ 3.45

Phillips Head Screw

#49-0063

Phillips Head Screw Pk/10 Steel Plated Size: 6 x 65mm

USD$ 3.45
Honda CD175 Socket Head Cap Screw
USD$ 3.50

Socket Head Cap Screw

#49-0064

Socket Head Cap Screw Pk/10 Zinc Finish Size: 5 x 16mm

USD$ 3.50
Honda CD175 Phillips Head Screw
USD$ 6.60

Phillips Head Screw

#49-0068

Phillips Head Screw Pk/10 Steel Plated Size: 6 x 90mm

USD$ 6.60
The names Honda, Yamaha, Kawasaki, Suzuki and any other trade names or symbols belonging to each respective corporation are stated for reference purposes only. The products on this site are after market (not OEM) replacement parts and accessories only. We have no relationship to the listed companies.