HondaCL350 ► 

Refine Search Results
Honda CL350 Starter Motor Seal
USD$ 3.75
Listed Models

Starter Motor Seal

#03-0784 | Honda CL350 (1968)

Starter Motor Seal - 60 x 1.4 - Replaces OEM# 31206-286-158 / 31206-402-008

USD$ 3.75
Listed Models
Honda CL350 Turn Signal Lamp Gasket
USD$ 2.90
Listed Models

Turn Signal Lamp Gasket

#11-2085 | Honda CL350 (1968)

Turn Signal Lamp Gasket, Replaces OEM # 33443-268-671

USD$ 2.90
Listed Models
Honda CL350 Turn Signal Replacement Lens
USD$ 2.90
Listed Models

Turn Signal Replacement Lens

#11-2110 | Honda CL350 (1968)

Turn Signal Replacement Lens (Amber) - Front or Rear OEM Ref # 33402-268-671

USD$ 2.90
Listed Models
Honda CL350 Tail Light Assembly
USD$ 44.35
Listed Models

Tail Light Assembly

#11-2147 | Honda CL350 (1968), CL350 (1970-1971)

Tail Light Assembly. Includes Brake Light Lens, Back Plate, Screws, Gasket, Wires, Connector and Dual Filament Bulb. Replaces OEM # 33700-292-671 / 33700-235-673 / 33701-300-671 / 33701-307-670 Two Bolt Back Mounting Bolt Pattern (Approx 96mm Center to Center), 2 Wires, Ready to Mount to your Bike!

USD$ 44.35
Listed Models
Honda CL350 Turn Signal Stem
USD$ 7.35
Listed Models

Turn Signal Stem

#11-2167 | Honda CL350 (1968)

Front Signal Lamp Stay - Chrome. Body Length 65mm, Thread 25mm, Total Length 90mm. Note: We sell these in Various Lengths, Confirm this is the Size you would Like Before Purchase

USD$ 7.35
Listed Models
Honda CL350 Tail Light Lens Gasket
USD$ 4.40
Listed Models

Tail Light Lens Gasket

#11-2168 | Honda CL350 (1968)

Tail Light Lens Gasket - Replaces OEM# 33709-077-671

USD$ 4.40
Listed Models
Honda CL350 Tail Light Lens
USD$ 9.60
Listed Models

Tail Light Lens

#11-2252 | Honda CL350 (1968), CL350 (1970-1971)

Red Tail Light Lens with Amber Side Reflectors. OEM Ref # 33702-077-671

USD$ 9.60
Listed Models
Honda CL350 Tail Light Lens
USD$ 11.05
Listed Models

Tail Light Lens

#11-2259 | Honda CL350 (1972-1973)

Tail Light Lens OEM Ref # 33702-341-671

USD$ 11.05
Listed Models
Honda CL350 Starter / Horn Button
USD$ 4.40
Listed Models

Starter / Horn Button

#12-0036 | Honda CL350 (1968)

Starter / Horn Button

USD$ 4.40
Listed Models
Honda CL350 Contact Point ~ Right Side
USD$ 5.55
Listed Models

Contact Point ~ Right Side

#14-0005 | Honda CL350 (1968), CL350 (1970-1973)

Contact Point ~ Right Side - Replaces OEM# 30203-286-004 / 30203-369-154

USD$ 5.55
Listed Models
Honda CL350 Contact Point ~ Left Side
USD$ 5.55
Listed Models

Contact Point ~ Left Side

#14-0006 | Honda CL350 (1968), CL350 (1970-1973)

Contact Point ~ Left Side - Replaces OEM# 30204-286-004 / 30202-369-154

USD$ 5.55
Listed Models
Honda CL350 Ignition Coil
USD$ 23.65
Listed Models

Ignition Coil

#17-6923 | Honda CL350 (1968-1973)

Ignition Coil, Replaces OEM # 30500-292-672 / 30500-312-000 / 30500-286-004 / 30500-286-007 / 30500-310-670 12 Volt Single Output Ignition Coil with spark plug wire. Primary resistance 5 Ohms. Spark plug wire is 19" long, Mounting holes are approximately 80mm (3.15") apart center to center, 6.5" blue wire with dual female bullet connector, 5.25" black/white line wire with male bullet connector. Note: If you are replacing a beige Honda coil, you will need to mount it backwards as the wires come out of it differently. Other than mounting, functionality will be the same.

USD$ 23.65
Listed Models
Honda CL350 Performance Rotor
USD$ 184.95
Listed Models

Performance Rotor

#24-2036 | Honda CL350 (1968), CL350 (1970-1973)

Rick's Electrics Performance Hot Shot Series Rotor, Replaces OEM# 31100-286-309 / 31100-286-004. This rotor features an upgraded design and is stronger & more powerful than the OE version.

USD$ 184.95
Listed Models
Honda CL350 Hot Shot Rectifier / Regulator
USD$ 125.75
Listed Models

Hot Shot Rectifier / Regulator

#24-2089 | Honda CL350 (1968-1973)

Rick's Electric Brand Hot Shot Rectifier / Regulator. Replaces OEM# 31400-292-670 / 31700-455-671 / 31700-292-008. This combination unit works with the stock stator to provide an upgraded charging system; it allows the stator to charge at full capacity 100% of the time! This is a direct plug-in combination rectifier-regulator that looks the same as the OE version & will mount in the same location as the OE rectifier for easy install. This unit is NOT compatible with lithium-ion batteries. If you have a Lithium Ion battery installed we sell a lithium ion version of this item.

USD$ 125.75
Listed Models
Honda CL350 Starter Motor Terminal Rubber Boot
USD$ 2.90
Listed Models

Starter Motor Terminal Rubber Boot

#73-0092 | Honda CL350 (1968)

Starter Motor Terminal (Cover) Rubber Boot. Replaces OEM # 32411-230-000

USD$ 2.90
Listed Models
Honda CL350 Turn Signal Pinch Bolt Set
USD$ 4.40
Listed Models

Turn Signal Pinch Bolt Set

#73-0840 | Honda CL350 (1968-1973)

Turn Signal Pinch Bolt Set. Includes 2X Chrome Bolts, 2X Hex Nuts and 4X Flat Washers. This set is used to clamp the turn signal onto the stem. Some models originally had a 25mm long bolt but these will interchange. This set includes hardware for 2 turn signals. If you need enough for all 4 signals please purchase 2 sets.

USD$ 4.40
Listed Models
Honda CL350 Seat Lock Bar Assembly
USD$ 39.95
Listed Models
Out of Stock
Email Me When Available

Seat Lock Bar Assembly

#73-1070 | Honda CL350 (1972-1973)

Seat Lock Bar Assembly, Replaces OEM# 77220-340-003 / 77220-340-011

USD$ 39.95
Listed Models
Out of Stock
Email Me When Available
Honda CL350 Front Signal Lamp Stay
USD$ 8.85
Listed Models

Front Signal Lamp Stay

#73-1106 | Honda CL350 (1968)

Front Signal Lamp Stay - Chrome. Body Length 40mm, Thread 30mm, Total Length 70mm. Note: We sell these in Various Lengths, Confirm this is the Size you would Like Before Purchase

USD$ 8.85
Listed Models
Honda CL350 Rear Turn Signal Stay
USD$ 14.95
Listed Models

Rear Turn Signal Stay

#99-4860 | Honda CL350 (1968), CL350 (1970-1972)

Rear Turn Signal Stay, Replaces OEM# 33607-286-871 / 33607-286-871B Can be used on the left or right side. Sold Each, Order the Quantity you Require.

USD$ 14.95
Listed Models
Honda CL350 Charging Kit ~ Lithium Ion Version
USD$ 229.35
Listed Models

Charging Kit ~ Lithium Ion Version

#99-4938 | Honda CL350 (1968-1973)

Rick's Electrics Charging Kit. Kit includes both a high quality stator and lithium-ion friendly rectifier / regulator. The kit will put out approximately 150 watts and power a 55 watt headlight. This kit is Not for use with standard lead acid batteries. The voltage set point is 14V +/- .2. Please contact the manufacturer of your Lithium Ion Battery to ensure our product has the correct set point for their product.

USD$ 229.35
Listed Models
Honda CL350 Charging Kit
USD$ 229.35
Listed Models
Out of Stock
Email Me When Available

Charging Kit

#99-4939 | Honda CL350 (1968-1973)

Rick's Electrics Charging Kit for use with Standard Lead Acid Batteries. Kit includes both a high quality stator and a rectifier / regulator. The kit will put out approximately 150 watts and power a 55 watt headlight. This kit is NOT for use with lithium ion batteries. We sell a charging kit for lithium ion batteries as well.

USD$ 229.35
Listed Models
Out of Stock
Email Me When Available
Honda CL350 Performance Starter Motor
USD$ 173.85
Listed Models

Performance Starter Motor

#99-4940 | Honda CL350 (1968), CL350 (1970-1973)

Rick's Electrics Brand Performance Hot Shot Starter Motor Unit, Replaces OEM# # 31200-286-405 / 31200-286-168 / 31200-286-158. It is an upgraded 4 brush permanent magnet starter; it includes a new cable that is longer than the stock piece for easy installation.

USD$ 173.85
Listed Models
Honda CL350 Custom Micro Push Button/Kill Switch
USD$ 15.50

Custom Micro Push Button/Kill Switch

#01-9924

Custom Micro Push Button/Kill Switch. High quality chrome switch designed to clean up the appearance of your bike while allowing the use of a switch. Works great as a hidden start/kill or horn button. Includes a contoured washer which allows for installations on round surfaces such as handlebars or frames. Switch Size 14mm x 12mm with 2X 20" wires.

USD$ 15.50
Honda CL350 Ignition Coil ~ 5 Ohm
USD$ 88.75

Ignition Coil ~ 5 Ohm

#07-9973

Dual Tower Performance High Output Ignition Coil 5.2 OHM Primary resistance ignition coil, 17K OHM Secondary Resistance. Can be used with all contact point ignitions and aftermarket electronic ignitions (non CDI) requiring a 5 OHM Coil. Fits most CB's, KZ/Z1 900/1000, KZ650 etc

USD$ 88.75
Honda CL350 Dynatek Performance High Output 3 Ohm Ignition Coil Set/2 With Plug Wires
USD$ 214.55

Dynatek Performance High Output 3 Ohm Ignition Coil Set/2 With Plug Wires

#07-9974

Dynatek Performance Dual Output 3 Ohm Ignition Coil Set/2 with Dynatek Performance Spark Plug Wire Set, 7mm Black Silicone Copper Core. Includes Hardware and Instructions. Comes with a one year warranty through Dynatek. Wires are 4' Length (cut to your needed length). 2 wires in this set which can be cut into 4. All wires are supplied with finished spark plug boot ends and loose coil terminals to allow the final length to be determined by the user. Wires feature a solid copper core for use on older vehicles where electrical interference is not an issue. High quality made in the USA. These high tech, top quality coils are made in the USA and are designed for maximum performance. They produce spark voltages in excess of 30,000 volts and spark energies second to none. Dyna Coils work with point ignitions, aftermarket electronic ignitions and factory electronic ignitions. Before selecting a coil check the coil primary resistance requirements as specified by the manufacturer of the ignition being used before purchasing. When choosing the right coil for your bike, never select a coil with a lower resistance than your ignition system.

USD$ 214.55
Honda CL350 Dynatek Charge Monitor
USD$ 99.85

Dynatek Charge Monitor

#07-9976

Dynatek Charge Monitor. Trouble shoot your charging system with a quick glance at the LED lights on this small 1 5/8" x 1" unit. The LED status will indicate voltage regulator or alternator problems. The Dyna Charge Monitor is a valuable addition to vehicles with a battery ignition and a charge system as found on nearly all stock vehicles. The Charge Monitor allows easy determination of the operational state of the charging system with a quick glance at the indicator LED's. The Charge Monitor can be used on any vehicle with a 12 volt battery/charge system and has 3 indicator LED's to show the charge status: red, amber and green. When the right most red LED is on the battery is being overcharged due to a faulty voltage regulator. When the green LED is on, the battery is being charged at a normal voltage. When the left most red LED is on, the battery voltage is getting very low and the charge circuit or battery is failing. High quality made in the USA. Comes with a one year warranty through the manufacturer.

USD$ 99.85
Honda CL350 Performance Tool Spark Plug Crimper Tool
USD$ 20.70

Performance Tool Spark Plug Crimper Tool

#07-9977

Performance Tool Spark Plug Crimp Tool. Perfect crimping tool for any spark plug wires. Incorporates wire cutter, terminal crimper tool and stripper in one handy tool. Black anodized finish with insulated hand grips. Crimp slot on the end of the tool secures most ignition terminals including "W" type, right angle and "High Tower" terminals. Crimps 7mm to 8.5mm ignition wire. Works with 10 to 22 gauge solderless terminals. High quality made in the USA. Comes with a lifetime warranty through the manufacturer!

USD$ 20.70
Honda CL350 Dynatek Performance Spark Plug Wire Set
USD$ 27.35

Dynatek Performance Spark Plug Wire Set

#07-9978

Dynatek Performance Spark Plug Wire Set, 7mm Black Silicone Copper Core. 4' Length (cut to your needed length). 2 wires in this set which can be cut into 4. All wires are supplied with finished spark plug boot ends and loose coil terminals to allow the final length to be determined by the user. Wires feature a solid copper core for use on older vehicles where electrical interference is not an issue. High quality made in the USA. Will work with Dyna Style Coils only # 07-9979, 07-9980 or 17-6810.

USD$ 27.35
Honda CL350 Dynatek Performance High Output 5 Ohm Ignition Coil Set/2
USD$ 192.35

Dynatek Performance High Output 5 Ohm Ignition Coil Set/2

#07-9979

Dynatek Performance Dual Output 5 Ohm Ignition Coil Set/2. Includes Hardware and Instructions. Comes with a one year warranty through Dynatek. These high tech, top quality coils are made in the USA and are designed for maximum performance. They produce spark voltages in excess of 30,000 volts and spark energies second to none. Dyna Coils work with point ignitions, aftermarket electronic ignitions and factory electronic ignitions. Before selecting a coil check the coil primary resistance requirements as specified by the manufacturer of the ignition being used before purchasing. When choosing the right coil for your bike, never select a coil with a lower resistance than your ignition system.

USD$ 192.35
Honda CL350 Dynatek Performance High Output 3 Ohm Ignition Coil Set/2
USD$ 199.75

Dynatek Performance High Output 3 Ohm Ignition Coil Set/2

#07-9980

Dynatek Performance Dual Output 3 Ohm Ignition Coil Set/2. Includes Hardware and Instructions. Comes with a one year warranty through Dynatek. These high tech, top quality coils are made in the USA and are designed for maximum performance. They produce spark voltages in excess of 30,000 volts and spark energies second to none. Dyna Coils work with point ignitions, aftermarket electronic ignitions and factory electronic ignitions. Before selecting a coil check the coil primary resistance requirements as specified by the manufacturer of the ignition being used before purchasing. When choosing the right coil for your bike, never select a coil with a lower resistance than your ignition system.

USD$ 199.75
Honda CL350 Black Universal Adjustable Headlight Brackets
USD$ 18.45

Black Universal Adjustable Headlight Brackets

#09-0005

Universal Adjustable Headlight Bracket Set/2 - Black Finish. Fits: 35-41mm Forks

USD$ 18.45
Honda CL350 Replacement Sealed Beam 12V (5 3/4")
USD$ 29.55
Out of Stock
Email Me When Available

Replacement Sealed Beam 12V (5 3/4")

#09-0007

Replacement Sealed Beam 12 Volt 60/37W 5 3/4" Universal Sealed Beam - DOT & CHP Approved

USD$ 29.55
Out of Stock
Email Me When Available
Honda CL350 Replacement Sealed Beam 12V (7")
USD$ 28.10
Out of Stock
Email Me When Available

Replacement Sealed Beam 12V (7")

#09-0008

Replacement Sealed Beam 12 Volt 60/50W 7" Universal Sealed Beam

USD$ 28.10
Out of Stock
Email Me When Available
Honda CL350 Headlamp Visor (7")
USD$ 14.00

Headlamp Visor (7")

#09-0009

Headlamp Visor With Eagle Emblem Fits 7" Headlight

USD$ 14.00
Honda CL350 Tommaselli Type Headlight Brackets (35mm-36mm)
USD$ 28.10

Tommaselli Type Headlight Brackets (35mm-36mm)

#09-0012

Tommaselli Type Headlight Brackets 35-36mm

USD$ 28.10
Honda CL350 Headlight Bracket Set
USD$ 14.95

Headlight Bracket Set

#09-0013

Headlight Bracket Set - Chrome 3-Hole Type Universal Adjustable Fit - 32mm-38mm

USD$ 14.95
Honda CL350 Tommaselli Type Headlight Brackets (32mm-34mm)
USD$ 28.10

Tommaselli Type Headlight Brackets (32mm-34mm)

#09-0015

Tommaselli Type Headlight Brackets 32-34mm

USD$ 28.10
Honda CL350 Headlight Bracket Set (35mm)
USD$ 33.95

Headlight Bracket Set (35mm)

#09-0016

Aluminum Custom Headlight Brackets 35mm Headlight Mounting Holes 7/16"

USD$ 33.95
Honda CL350 Headlight Bracket Set
USD$ 14.75

Headlight Bracket Set

#09-0020

Headlight Bracket Set - Black 3-Hole Type Universal Adjustable Fit - 32mm-38mm

USD$ 14.75
Honda CL350 Cast Aluminum Black Headlight Bracket Set
USD$ 40.65

Cast Aluminum Black Headlight Bracket Set

#09-0021

Cast Aluminum Black Headlamp Mounting Bracket Set. Sold with adapters to fit 35mm, 39mm and 41mm fork tube outer diameters.

USD$ 40.65
Honda CL350 Custom Universal Headlamp
USD$ 51.75

Custom Universal Headlamp

#09-0023

Custom Universal Headlamp 4 1/2" Chrome bottom mount lamp assembly. High beam indicator. Halogen bulb and headlamp plug with wires.

USD$ 51.75
Honda CL350 Custom Universal Headlamp
USD$ 51.75

Custom Universal Headlamp

#09-0026

Custom Universal Headlamp 5 1/2" Chrome bottom mount lamp assembly. High beam indicator. Halogen bulb and headlamp plug with wires.

USD$ 51.75
Honda CL350 Rectangular Headlamp
USD$ 33.25

Rectangular Headlamp

#09-0027

Small Rectangular Headlamp 6.5"x4.5" Lens Steel Lens Frame, With Black Plastic Housing Halogen Bulb & Headlamp Plug With Wires Side Mount, 14mm Mounting Holes, 7.25" Width Two Openings On Back

USD$ 33.25
Honda CL350 Custom Bates Style 4 1/2" Black Bottom Mount Headlight
USD$ 36.95

Custom Bates Style 4 1/2" Black Bottom Mount Headlight

#09-0043

Custom Bates Style 4 1/2" Satin Black Bottom Mount Headlight. Glass sealed beam with a P15D base, 12 volt 35/35 watt bulb, 16" wire leads. Blue dot high/low beam indicator on top of light housing.

USD$ 36.95
Honda CL350 Headlight Shell & Rim
USD$ 59.15

Headlight Shell & Rim

#09-0047

Custom Ready to Assemble Chrome Side Mount Headlight Bucket Rim & Retainer. Designed for 7" sealed or non sealed H4 type headlights. Chrome all metal bucket with chrome trim ring. Side mounting holes are threaded (13.5mm). Outer side mounting points are 7-1/2" apart. Comes with a wired plug that works with sealed beam or H4 bulbs. H4 Beam Headlight sold separately #09-0072

USD$ 59.15
Honda CL350 Headlight Assembly
USD$ 77.65

Headlight Assembly

#09-0050

Chrome 7" Side Mount Headlight Assembly. Chrome all metal bucket with chrome trim ring. H4 Bulb with European style parking light (Not used for North American models)

USD$ 77.65
Honda CL350 Classic Round Black Taillight
USD$ 40.65

Classic Round Black Taillight

#09-0073

Classic Round Black Taillight with plate bracket. 2 1/4" Round lens (with a clear bottom to light up your plates), 12 Volt double filament bulb. Works as a running and brake light.

USD$ 40.65
Honda CL350 Mini Bates Style LED Taillight ~ Chrome
USD$ 29.55

Mini Bates Style LED Taillight ~ Chrome

#09-0074

Mini Bates Style LED Taillight ~ Chrome. 12 Volt taillight with 8 super bright LED's. Has running and brake light functions. Comes with mounting hardware and swivel bracket which allows it to be angled at different positions. Lens is 1 3/4" round, Outer bezel is 2 1/4" in diameter and is 2 1/4" long, Stands about 3" tall from base of mounting bracket. 3 Wire lead is about 12" long with bullet connectors. (Ground, running and brake light Wiring instructions) RED = Stop YELLOW = Running Lights BLACK = Ground

USD$ 29.55
Honda CL350 Mini Bates Style LED Taillight ~ Black
USD$ 34.75

Mini Bates Style LED Taillight ~ Black

#09-0075

Mini Bates Style LED Taillight ~ Black. 12 Volt taillight with 8 super bright LED's. Has running and brake light functions. Comes with mounting hardware and swivel bracket which allows it to be angled at different positions. Lens is 1 3/4" round, Outer bezel is 2 1/4" in diameter and is 2 1/4" long, Stands about 3" tall from base of mounting bracket. 3 Wire lead is about 12" long with bullet connectors. (Ground, running and brake light Wiring instructions) RED = Stop YELLOW = Running Lights BLACK = Ground

USD$ 34.75
Honda CL350 Beehive Chrome Taillight
USD$ 36.95

Beehive Chrome Taillight

#09-0076

Beehive Chrome Taillight Universal fender mounting for most applications. For under plate mounting, with upward plate illumination. 12 volt bulb, Gasket for fender mounting and plate bracket included. 6 3/4″ Length, 3″ Width, 4″ Height.

USD$ 36.95
The names Honda, Yamaha, Kawasaki, Suzuki and any other trade names or symbols belonging to each respective corporation are stated for reference purposes only. The products on this site are after market (not OEM) replacement parts and accessories only. We have no relationship to the listed companies.