HondaCL350 ► 

Refine Search Results
Honda CL350 Clutch Center Nut Removal Tool
USD$ 8.85
Listed Models

Clutch Center Nut Removal Tool

#35-0051 | Honda CL350 (1968)

Clutch Center Nut Removal Tool, The perfect tool for easier removal/fitting, without damaging the special locking nut. Inside diameter 24mm, use with 3/8" driver.

USD$ 8.85
Listed Models
Honda CL350 Clutch Center Nut Removal Tool ~ Premium
USD$ 12.55
Listed Models

Clutch Center Nut Removal Tool ~ Premium

#35-0076 | Honda CL350 (1968)

Premium Clutch Center Nut Removal Tool, The perfect tool for easier removal/fitting, without damaging the special locking nut. Both ends with 1/2 drive extension bar, Diameter 20 x 24.

USD$ 12.55
Listed Models
Honda CL350 Clutch Spring Set
USD$ 18.45
Listed Models

Clutch Spring Set

#39-1047 | Honda CL350 (1968-1973)

Clutch Spring Set

USD$ 18.45
Listed Models
Honda CL350 Clutch Plate
USD$ 5.90
Listed Models

Clutch Plate

#39-1079C | Honda CL350 (1968-1973)

Clutch Plate 8 Pieces Required OEM Ref # 22201-286-010 / 22201-415-000 / 22201-ME2-000

USD$ 5.90
Listed Models
Honda CL350 Steel Clutch Plate
USD$ 8.10
Listed Models

Steel Clutch Plate

#39-1140 | Honda CL350 (1968)

Steel Clutch Plate B OEM Ref # 22321-KA4-700 Order the Quantity you require

USD$ 8.10
Listed Models
Honda CL350 Steel Clutch Plate "A"
USD$ 5.90
Listed Models

Steel Clutch Plate "A"

#39-1410 | Honda CL350 (1968), CL350 (1970-1973)

Steel Clutch Plate "A", Replaces OEM# 22311-286-000. 1 Plate Used Per Bike

USD$ 5.90
Listed Models
Honda CL350 Carburetor Screw Kit
USD$ 11.05
Listed Models

Carburetor Screw Kit

#48-0795 | Honda CL350 (1968-1973)

Carburetor Screw Kit (Enough For 2 Carbs) Get a new set of screws to clean up the look of your carbs! Kit Includes: 2X - Drain Screws with O-Rings 8X - 4x10 Screws w Lock Washers 8X - 4x8 Screws w Lock Washer 2X - 5x12 Screws w Lock Washers

USD$ 11.05
Listed Models
Honda CL350 Carb Rebuild Kit
USD$ 11.80
Listed Models

Carb Rebuild Kit

#48-1393 | Honda CL350 (1970-1973)

Carb Rebuild Kit for carbs with ROUND CARB BOWLS. Note: Each Kit Rebuilds One Carb, Order the Quantity of Kits you Require

USD$ 11.80
Listed Models
Honda CL350 Float Needle & Seat
USD$ 9.60
Listed Models

Float Needle & Seat

#48-1519 | Honda CL350 (1970-1972)

Float Needle & Seat High Quality - Made In Japan OEM Ref # 16011-287-004

USD$ 9.60
Listed Models
Honda CL350 Float Bowl Drain Screw
USD$ 5.15
Listed Models

Float Bowl Drain Screw

#48-5041 | Honda CL350 (1968-1973)

Float Bowl Drain Screw w O-Ring. Note: We sell these each, order the quantity you require

USD$ 5.15
Listed Models
Honda CL350 Air Screw Needle O-Ring
USD$ 1.10
Listed Models

Air Screw Needle O-Ring

#48-5043 | Honda CL350 (1968), CL350 (1970-1973)

Air Screw Needle O-Ring. 2.8mm x 1.2mm. Note: sold each, order the quantity you require

USD$ 1.10
Listed Models
Honda CL350 Shock Absorber Nut
USD$ 2.40
Listed Models

Shock Absorber Nut

#49-0779 | Honda CL350 (1970-1973)

Shock Absorber Nut, Used when Installing Shocks. Replaces OEM # 90309-315-000 Note: Nuts sold Each, order the quantity you require

USD$ 2.40
Listed Models
Honda CL350 Front Sprocket Lock Plate Set
USD$ 3.65
Listed Models
Out of Stock
Email Me When Available

Front Sprocket Lock Plate Set

#49-0782 | Honda CL350 (1968), CL350 (1970-1973)

Front Sprocket Lock Plate with 2 Lock Plate Bolts. It's Always good to replace these when installing a new front sprocket. Replaces OEM # 23811-292-000 (Plate) and OEM # 92101-06016-0A (Bolts) X2.

USD$ 3.65
Listed Models
Out of Stock
Email Me When Available
Honda CL350 Steering Stem Washer
USD$ 2.20
Listed Models

Steering Stem Washer

#49-0787 | Honda CL350 (1968)

Chrome Steering Stem Washer, Replaces OEM # 90503-283-000 Sold Each, order the quantity you require.

USD$ 2.20
Listed Models
Honda CL350 Side Stand Spring
USD$ 2.20
Listed Models

Side Stand Spring

#49-0788 | Honda CL350 (1968), CL350 (1970-1973)

Side Stand Spring, Replaces OEM # 95014-72402

USD$ 2.20
Listed Models
Honda CL350 Tachometer Cable
USD$ 11.80
Listed Models

Tachometer Cable

#51-2402 | Honda CL350 (1973)

Tachometer Cable - Black - OEM Ref. # 37260-300-000 / 37260-449-840 Made in Japan

USD$ 11.80
Listed Models
Honda CL350 Starter Motor Terminal Rubber Boot
USD$ 2.90
Listed Models

Starter Motor Terminal Rubber Boot

#73-0092 | Honda CL350 (1968)

Starter Motor Terminal (Cover) Rubber Boot. Replaces OEM # 32411-230-000

USD$ 2.90
Listed Models
Honda CL350 Shock Absorber Joint Rubber Set/2
USD$ 4.05
Listed Models

Shock Absorber Joint Rubber Set/2

#73-0093 | Honda CL350 (1968)

Shock Absorber Joint Rubber Set/2. Replaces OEM # 52484-292-000

USD$ 4.05
Listed Models
Honda CL350 Seat Lock with Keys
USD$ 18.45
Listed Models

Seat Lock with Keys

#73-0140 | Honda CL350 (1972-1973)

Seat Lock with Keys, Replaces OEM # 77230-399-007 / 77230-107-711 This seat lock works perfect for the bikes listed but the locking mechanism sticks out a bit farther then the OEM type. If you have lost your old key you have to remove the seat lock bracket and assembly. This can be done with a short 10mm wrench or socket, once that's done the rest is easy.

USD$ 18.45
Listed Models
Honda CL350 Rear Wheel Spoke Set
USD$ 38.45
Listed Models

Rear Wheel Spoke Set

#73-0179 | Honda CL350 (1968)

Rear Spoke Set with Nipples - 36 Spokes with 36 Nipples. Note: Spokes are Silver in Color and Nipples are Gold in Color. For Stock 18" Rear Type Rims Only

USD$ 38.45
Listed Models
Honda CL350 Footrest Rubbers
USD$ 14.75
Listed Models

Footrest Rubbers

#73-0183 | Honda CL350 (1968)

Footrest Rubbers (Set/2) - OEM Ref # 50661-110-000

USD$ 14.75
Listed Models
Honda CL350 Passenger Rear Footrest Rubber Set
USD$ 9.60
Listed Models

Passenger Rear Footrest Rubber Set

#73-0185 | Honda CL350 (1968)

Passenger Rear Footrest Rubber Set/2, Replaces OEM # 95011-31000

USD$ 9.60
Listed Models
Honda CL350 Clutch Tab Washer
USD$ 4.40
Listed Models

Clutch Tab Washer

#73-0839 | Honda CL350 (1968)

Clutch Tab Washer, 16mm Size, Replaces OEM # 90431-292-000

USD$ 4.40
Listed Models
Honda CL350 Turn Signal Pinch Bolt Set
USD$ 4.40
Listed Models

Turn Signal Pinch Bolt Set

#73-0840 | Honda CL350 (1968-1973)

Turn Signal Pinch Bolt Set. Includes 2X Chrome Bolts, 2X Hex Nuts and 4X Flat Washers. This set is used to clamp the turn signal onto the stem. Some models originally had a 25mm long bolt but these will interchange. This set includes hardware for 2 turn signals. If you need enough for all 4 signals please purchase 2 sets.

USD$ 4.40
Listed Models
Honda CL350 Brake Rod Joint
USD$ 2.20
Listed Models

Brake Rod Joint

#73-0843 | Honda CL350 (1968)

Brake Rod/Arm Joint, Replaces OEM # 95015-32001

USD$ 2.20
Listed Models
Honda CL350 Side Stand Pivot Bolt & Nut Set
USD$ 2.90
Listed Models

Side Stand Pivot Bolt & Nut Set

#73-0893 | Honda CL350 (1968)

Side Stand Pivot Bolt & Nut Set, This is the Set Used to Fasten the Side Stand in Place. Replaces OEM # 90108-283-000 (Bolt) and 94002-10000-0S (Nut).

USD$ 2.90
Listed Models
Honda CL350 Grease Fitting Nipple (Pk/2)
USD$ 5.15
Listed Models

Grease Fitting Nipple (Pk/2)

#73-0941 | Honda CL350 (1968)

Grease Fitting Nipple A .45 (Pk/2). Replaces OEM # 96201-30001

USD$ 5.15
Listed Models
Honda CL350 Side Cover Emblem Fixing Nut Pk/2
USD$ 3.65
Listed Models

Side Cover Emblem Fixing Nut Pk/2

#73-0944 | Honda CL350 (1968)

Side Cover Emblem Fixing Nut (3mm) Pk/2, Used to Attach the Side Cover Emblems. Replaces OEM # 90313-567-000 Check your bike to see the quantity you require

USD$ 3.65
Listed Models
Honda CL350 Rear Wheel Bearing Retainer
USD$ 21.95
Listed Models

Rear Wheel Bearing Retainer

#73-1068 | Honda CL350 (1968)

Rear Wheel Bearing Retainer - Brake Disc Side - Replaces OEM# 41231-286-000

USD$ 21.95
Listed Models
Honda CL350 Seat Lock Bar Assembly
USD$ 39.95
Listed Models
Out of Stock
Email Me When Available

Seat Lock Bar Assembly

#73-1070 | Honda CL350 (1972-1973)

Seat Lock Bar Assembly, Replaces OEM# 77220-340-003 / 77220-340-011

USD$ 39.95
Listed Models
Out of Stock
Email Me When Available
Honda CL350 Custom Brake Rod Adjuster Knob ~ Joker Machine
USD$ 19.95
Listed Models

Custom Brake Rod Adjuster Knob ~ Joker Machine

#73-1072 | Honda CL350 (1968)

Joker Machine Brand ~ Custom Brake Rod Adjuster Knob, Replaces OEM # 95015-42000 Gives your bike a great custom look while refining the quality of your brake adjuster knob! Makes for super easy brake adjustments due to the choice of a knurled outside knob and a hex nut feature all in one. High quality CNC machined part, made in the U.S.A.

USD$ 19.95
Listed Models
Honda CL350 Custom Rear Brake Stopper Arm Strap ~ Joker Machine
USD$ 34.00
Listed Models

Custom Rear Brake Stopper Arm Strap ~ Joker Machine

#73-1073 | Honda CL350 (1968)

Joker Machine Brand ~ Custom Rear Brake Stopper Arm Strap, Replaces OEM # 43431-286-010 / 43431-340-000 This strap is lightweight, identical length to the stock strap and really gives your bike a great custom look! High quality part CNC machined in the U.S.A.

USD$ 34.00
Listed Models
Honda CL350 Front Signal Lamp Stay
USD$ 8.85
Listed Models

Front Signal Lamp Stay

#73-1106 | Honda CL350 (1968)

Front Signal Lamp Stay - Chrome. Body Length 40mm, Thread 30mm, Total Length 70mm. Note: We sell these in Various Lengths, Confirm this is the Size you would Like Before Purchase

USD$ 8.85
Listed Models
Honda CL350 Custom Black Gas/Fuel Tank Cap ~ Joker Machine
USD$ 110.95
Listed Models

Custom Black Gas/Fuel Tank Cap ~ Joker Machine

#73-1156 | Honda CL350 (1972)

Joker Machine Brand ~ Custom Black Gas/Fuel Tank Flip Up Billet Cap. Includes Cap with a spring loaded alloy flange, replaceable rubber gasket and alloy screw attachment. Replaces OEM # 17510-323-310 Installs easily onto the tank hinges with an alloy screw (not rivets found on the stock set-up) in minutes. Lightweight design is made from a solid block of 1" thick Billet aluminum. Works with stock style latching mechanisms (Sold Separately). High quality CNC machined cap made in the U.S.A.

USD$ 110.95
Listed Models
Honda CL350 Clutch Ball Retainer
USD$ 11.20
Listed Models

Clutch Ball Retainer

#99-4850 | Honda CL350 (1968), CL350 (1970-1973)

Clutch Ball Retainer, Replaces OEM# 22860-286-000

USD$ 11.20
Listed Models
Honda CL350 Rear Turn Signal Stay
USD$ 14.95
Listed Models

Rear Turn Signal Stay

#99-4860 | Honda CL350 (1968), CL350 (1970-1972)

Rear Turn Signal Stay, Replaces OEM# 33607-286-871 / 33607-286-871B Can be used on the left or right side. Sold Each, Order the Quantity you Require.

USD$ 14.95
Listed Models
Honda CL350 Speedometer Cable
USD$ 12.75
Listed Models

Speedometer Cable

#99-4883 | Honda CL350 (1973)

Speedometer Cable, Replaces OEM# 44830-KB7-000 / 44830-456-000 / 44830-437-670 / 44831-456-000 / 44830-369-700 / 44830-313-000

USD$ 12.75
Listed Models
Honda CL350 Charging Kit ~ Lithium Ion Version
USD$ 229.35
Listed Models

Charging Kit ~ Lithium Ion Version

#99-4938 | Honda CL350 (1968-1973)

Rick's Electrics Charging Kit. Kit includes both a high quality stator and lithium-ion friendly rectifier / regulator. The kit will put out approximately 150 watts and power a 55 watt headlight. This kit is Not for use with standard lead acid batteries. The voltage set point is 14V +/- .2. Please contact the manufacturer of your Lithium Ion Battery to ensure our product has the correct set point for their product.

USD$ 229.35
Listed Models
Honda CL350 Charging Kit
USD$ 229.35
Listed Models
Out of Stock
Email Me When Available

Charging Kit

#99-4939 | Honda CL350 (1968-1973)

Rick's Electrics Charging Kit for use with Standard Lead Acid Batteries. Kit includes both a high quality stator and a rectifier / regulator. The kit will put out approximately 150 watts and power a 55 watt headlight. This kit is NOT for use with lithium ion batteries. We sell a charging kit for lithium ion batteries as well.

USD$ 229.35
Listed Models
Out of Stock
Email Me When Available
Honda CL350 Performance Starter Motor
USD$ 173.85
Listed Models

Performance Starter Motor

#99-4940 | Honda CL350 (1968), CL350 (1970-1973)

Rick's Electrics Brand Performance Hot Shot Starter Motor Unit, Replaces OEM# # 31200-286-405 / 31200-286-168 / 31200-286-158. It is an upgraded 4 brush permanent magnet starter; it includes a new cable that is longer than the stock piece for easy installation.

USD$ 173.85
Listed Models
▼ Show Universal Parts ▼
The names Honda, Yamaha, Kawasaki, Suzuki and any other trade names or symbols belonging to each respective corporation are stated for reference purposes only. The products on this site are after market (not OEM) replacement parts and accessories only. We have no relationship to the listed companies.