HondaCR125M ► 

Honda CR125M Clutch Lever
US$ 7.00
Fits: CR125M (76-78)

Clutch Lever

#08-0006 | Honda CR125M (1976-1978)

Clutch Lever OEM Ref # 53178-369-700 / 53190-329-010 / 53190-286-670

Honda CR125M Clutch Lever ~ GP Style
US$ 7.00
Fits: CR125M (74-75)

Clutch Lever ~ GP Style

#08-0080 | Honda CR125M (1974-1975)

Clutch Lever - Custom GP Style in Silver, This Has More of a Bend/Kickback then the stock lever. Replaces OEM # 53178-369-700

Honda CR125M Brake Lever
US$ 7.00
Fits: CR125M (76-78)

Brake Lever

#08-0084 | Honda CR125M (1976-1978)

Brake Lever OEM Ref # 53175-467-000 / 53170-413-670 / 53175-402-700 / 53175-360-700 / 53175-399-700

Honda CR125M Oil Drain Plug
US$ 9.00
Fits: CR125M (75-78)

Oil Drain Plug

#15-0016 | Honda CR125M (1975-1978)

Magnetic Oil Drain Plug 12mm Diameter 1.50 Thread Pitch OEM Ref # 92800-12000 / 92066-1174 / 01107-12208

Honda CR125M Ignition Coil
US$ 14.00
Fits: CR125M (74-78)

Ignition Coil

#17-6922 | Honda CR125M (1974-1978)

High Performance 6 or 12 Volt Single Output Ignition Coil. These can be adapted to work on many applications requiring a point or CDI ignition coil. Sold exactly as shown in photo. Does not include plug cap. 12 or 6 Volt Primary Resistance 0.5 Ohms Secondary Resistance 5.0 Ohms CDI or Points ignitions Body Diameter: 35mm Body Height: 30mm Mounting Tab Length: 17mm Mounting Tab Width: 22mm Mounting Tab Hole Size: 6mm Spark Plug Wire Length: 18" Includes ground wire

Honda CR125M Fork Seals
US$ 13.00
Fits: CR125M (76-78)

Fork Seals

#27-1007 | Honda CR125M (1976-1978)

Fork Seals Set/2 35 X 48 X 10.5/11

Honda CR125M Fork Cap O-Ring Set/2
US$ 2.50
Fits: CR125M (76-78)

Fork Cap O-Ring Set/2

#49-0790 | Honda CR125M (1976-1978)

Fork Cap O-Ring Set of 2. 23mm x 2.8mm size. Replaces OEM # 94608-50000 X2.

Honda CR125M CR125M 1974-75 Elsinore 11 Pc. Decal Set
US$ 44.95
Fits: CR125M (74-75)

CR125M 1974-75 Elsinore 11 Pc. Decal Set

#73-0818 | Honda CR125M (1974-1975)

CR125M 1974-75 Elsinore 11 Pc. Decal (Sticker) Set. This is an accurate 11 piece reproduction decal set for the Honda CR125 Elsinore. Add the finishing touch to your restoration with these decals. This 11 piece decal set includes: - Right and left “Honda” tank decals - Right and left “Elsinore”side decals - Right and left “360 Showa” decals - Front and rear “D.I.D” rim decals - “IMPORTANT NOTICE” warning decal - "HONDA CR125M PRODUCTION RACER" decal - Warning decal These decals are no longer available from the manufacturer. All decals are "printed" on the highest quality materials from companies such as 3M and Avery. All decals have a protective coating to resist scratching and to protect colors from UV rays. These decals are adhesive backed for simple application.

Honda CR125M Side Stand Pivot Bolt & Nut Set
US$ 4.50
Fits: CR125M (74-78)

Side Stand Pivot Bolt & Nut Set

#73-0893 | Honda CR125M (1974-1978)

Side Stand Pivot Bolt & Nut Set, This is the Set Used to Fasten the Side Stand in Place. Replaces OEM # 90108-283-000 (Bolt) and 94002-10000-0S (Nut).

Honda CR125M Fork Seal Stopper Metal Ring Pk/2
US$ 6.00
Fits: CR125M (76-78)

Fork Seal Stopper Metal Ring Pk/2

#73-0940 | Honda CR125M (1976-1978)

Fork Seal Stopper Metal Ring Pk/2, Replaces OEM # 51447-KL4-951 This is the Metal Ring above the Fork Seal.

Honda CR125M Grease Fitting Nipple (Pk/2)
US$ 6.00
Fits: CR125M (74-75)

Grease Fitting Nipple (Pk/2)

#73-0941 | Honda CR125M (1974-1975)

Grease Fitting Nipple A .45 (Pk/2). Replaces OEM # 96201-30001

Honda CR125M Handlebar Clamp Set /2
US$ 20.00
Fits: CR125M (74-78)

Handlebar Clamp Set /2

#73-1120 | Honda CR125M (1974-1978)

Black Handlebar Clamp Set/2. These clamp the stock 7/8" handlebars to the upper triple clamp. Replaces OEM # 95014-22200

▼ Show Universal Parts ▼
The names Honda, Yamaha, Kawasaki, Suzuki and any other trade names or symbols belonging to each respective corporation are stated for reference purposes only. The products on this site are after market (not OEM) replacement parts and accessories only. We have no relationship to the listed companies.