HondaCR250 ► 

Show Search Results Filters
Honda CR250 Rivet Link
US$ 3.50

Rivet Link

#01-8801

Cam Chain Rivet Link Stepped Parallel Plate Fits BF05T Cam Chains

Honda CR250 Rivet Link
US$ 4.00

Rivet Link

#01-8802

Cam Chain Rivet Link Stepped Parallel Plate Fits 219FTSS Cam Chains

Honda CR250 Rivet Link
US$ 4.00

Rivet Link

#01-8803

Cam Chain Rivet Link Stepped Peanut Plate Fits 219T Cam Chains

Honda CR250 Clip Link
US$ 3.00

Clip Link

#01-8813

Cam Chain Clip Link Peanut Shape Fits 25H Cam Chains

Honda CR250 Cam Chain Rivet Link
US$ 3.00

Cam Chain Rivet Link

#01-8814

Cam Chain Rivet Link Peanut Shape Fits BS05MH TSUBAKI

Honda CR250 Cam Chain Rivet Link
US$ 3.00

Cam Chain Rivet Link

#01-8815

Cam Chain Rivet Link Peanut Shape Fits BF05M TSUBAKI

Honda CR250 Cam Chain Rivet Link
US$ 4.50

Cam Chain Rivet Link

#01-8816

Cam Chain Rivet Link Fits 82RH2015

Honda CR250 Three Bond # 1184
US$ 13.00

Three Bond # 1184

#05-0001

Gasket Cement - Three Bond #1184 - 100 gram tube - Gray semi-drying type. Use on gaskets except head gasket and on all surfaces without gaskets.

Honda CR250 Three Bond Handlebar Griplock
US$ 12.00

Three Bond Handlebar Griplock

#05-0002

Three Bond Handlebar Griplock - 1 oz, 28.35g Tube. Specially formulated adhesive locks grips in place. Puts an end to grip twisting and sliding. Fast Set-up time.

Honda CR250 Three Bond Spoke Set Adhesive
US$ 13.00

Three Bond Spoke Set Adhesive

#05-0003

Three Bond Spoke Set Adhesive - 0.34 Oz, 10ml. Sets spoke nipples snug while protecting threads from rust and corrosion. Helps wheels stay true longer. Drip control nozzle for easier applications.

Honda CR250 Three Bond Super Glue
US$ 9.00

Three Bond Super Glue

#05-0004

Three Bond Super Glue (Gel Tyle) General Purpose Adhesive - 0.07 Oz, 2ml. Three Bond Super Glue attains practical-use strength in seconds. Contains no evaporative elements, so there's never any shrinkage to weaken bonding points. Excellent for nonporous materials. Made in the U.S.A.

Honda CR250 Three Bond Thread Lock
US$ 15.00

Three Bond Thread Lock

#05-0005

Three Bond Thread Lock - 0.34 Oz, 10ml. Low Strength, Removeable, Frequent Repair Type. Perfect for adding an extra hold to small screws and bolts which are frequently removed. Adds an extra hold of 10-20% greater then that of basic tightening. Blue in color.

Honda CR250 Oil Filter Washers
US$ 4.00

Oil Filter Washers

#15-0039

Oil Filter Washers Pk/5 30mm OD - 20.5mm ID - .5mm Thickness

Honda CR250 Oil Filter O-Ring
US$ 2.00

Oil Filter O-Ring

#15-0052

Oil Filter O-Ring Pk/2 Fits Oil Filter - 1L9-13440-90

Honda CR250 Oil Filter O-Ring
US$ 2.50

Oil Filter O-Ring

#15-0053

Oil Filter O-Ring Pk/2 Fits Oil Filter - 1J7-13440-90

Honda CR250 Oil Filter O-Ring
US$ 2.50

Oil Filter O-Ring

#15-0054

Oil Filter O-Ring Fits Oil Filter - 16518-45000

Honda CR250 Chain Clip Link Remover Pliers
US$ 20.00

Chain Clip Link Remover Pliers

#35-0050

Chain Clip Link Remover Pliers. Slim jaw design allows for easy install and removal of chain clip links.

Honda CR250 Brush Cleaning Tool
US$ 11.95

Brush Cleaning Tool

#35-0055

Blue Chain Cleaning Brush/ Gear Cleaner Tool.

Honda CR250 382pc O-Rings Kit with Plastic Case
US$ 25.00

382pc O-Rings Kit with Plastic Case

#35-0066

382pc O-Rings Kit with Plastic Case. 30 different sizes included in mm's. QTY---Width----Inside Dia.---------QTY---Width-----Inside Dia. 20X---1.78mm--2.90mm------------13X---2.62mm--9.19mm 20X---1.78mm--3.69mm------------13X---2.62mm--10.77mm 20X---1.78mm--4.47mm------------13X---2.62mm--12.37mm 20X---1.78mm--5.29mm------------13X---2.62mm--13.95mm 20X---1.78mm--6.07mm------------13X---2.62mm--15.54mm 20X---1.78mm--7.65mm------------13X---2.62mm--17.12mm 20X---1.78mm--9.25mm------------13X---2.62mm--18.72mm 10X---3.53mm--18.64mm----------10X---3.53mm--31.34mm 10X---3.53mm--20.22mm----------10X---3.53mm--32.92mm 10X---3.53mm--21.82mm----------10X---3.53mm--34.52mm 10X---3.53mm--23.39mm----------10X---3.53mm--36.10mm 10X---3.53mm--25.00mm----------10X---3.53mm--37.70mm 10X---3.53mm--26.57mm------------7X---5.34mm--37.47mm 10X---3.53mm--28.17mm------------7X---5.34mm--40.65mm 10X---3.53mm--29.75mm------------7X---5.34mm--43.82mm

Honda CR250 419pc O-Rings Kit with Plastic Case
US$ 30.00

419pc O-Rings Kit with Plastic Case

#35-0067

419pc O-Rings Kit with Plastic Case. 32 different sizes included metric sizes. QTY---Width----Inside Dia.---------QTY---Width-----Inside Dia. 20X---1.50mm--3.00mm------------13X---2.50mm--11.00mm 23X---1.50mm--7.00mm------------14X---2.50mm--13.00mm 23X---1.50mm--10.0mm------------13X---2.50mm--14.00mm 23X---1.50mm--13.0mm------------14X---2.50mm--16.00mm 20X---2.00mm--4.40mm------------14X---2.50mm--18.00mm 18X---2.00mm--5.00mm------------13X---2.50mm--19.00mm 14X---2.50mm--10.0mm------------14X---2.50mm--21.00mm 13X---2.50mm--22.00mm----------10X---3.50mm--31.00mm 10X---3.50mm--18.00mm----------10X---3.50mm--33.00mm 10X---3.50mm--20.00mm----------10X---3.50mm--34.50mm 10X---3.50mm--22.00mm----------10X---3.50mm--36.00mm 10X---3.50mm--23.50mm----------10X---3.50mm--38.00mm 10X---3.50mm--25.00mm----------10X---3.50mm--41.00mm 10X---3.50mm--26.50mm----------10X---3.50mm--44.00mm 10X---3.50mm--28.00mm----------10X---3.50mm--47.00mm 10X---3.50mm--30.00mm----------10X---3.50mm--50.00mm

Honda CR250 Round Magnetic Parts Dish
US$ 10.00

Round Magnetic Parts Dish

#35-0097

Round Stainless Steel Magnetic Parts Dish. Very useful when working with small screws, hardware and parts. 149mm Diameter, 40mm Height.

Honda CR250 Rectangular Magnetic Parts Dish
US$ 17.00

Rectangular Magnetic Parts Dish

#35-0098

Rectangular Stainless Steel Magnetic Parts Dish. Very useful when working with small screws, hardware and parts. 9.5" Length, 5.5" Width, 1.1" Height.

Honda CR250 Cylinder Stud Installation Tool Set
US$ 12.95

Cylinder Stud Installation Tool Set

#35-0101

3 Piece Cylinder Stud Installation Tool Set. Installs studs without damaging the threads. Steel construction with black oxide finish for longer tool life. Includes M6 x 1.00, M8 x 1.25 and M10 x 1.25 stud installers. Hex head is 19mm.

Honda CR250 Stud Extractor 1-6mm
US$ 19.00

Stud Extractor 1-6mm

#35-0102

Stud Extractor 1/4" Drive, used to remove seized or broken studs and bolts. Designed to fit into small areas, where studs may be hard to reach. Use with an impact wrench. Fits studs from (1-6mm)

Honda CR250 Stud Extractor 6-12mm
US$ 24.00

Stud Extractor 6-12mm

#35-0103

Stud Extractor 3/8" Drive, used to remove seized or broken studs and bolts. Designed to fit into small areas, where studs may be hard to reach. Use with an impact wrench. Fits studs from (6-12mm)

Honda CR250 Permatex Valve Lapping Paste
US$ 9.50

Permatex Valve Lapping Paste

#35-0124

Valve Lapping Paste - Permatex Aids valve grinding and seating operations to remove burrs, surface defects, carbon and corrosion. Mixes with water to form an easy to use paste.

Honda CR250 Piston Ring Tool
US$ 22.00

Piston Ring Tool

#35-9112

Piston Ring Tool with plastic storage case. This tool is designed to prevent ring breakage during cylinder installation. This tool can be easily removed after cylinder is in position. Comes with 4 rings to accept the smallest triple to the largest single cylinder engines. Fits 40-85mm sizes.

Honda CR250 Fluid Hose Clamp
US$ 13.00

Fluid Hose Clamp

#35-9117

Fluid Hose Clamp, all steel construction with adjustable locking collar. Completely or partially closes flexible brake, fuel, and vacuum fluid lines.

Honda CR250 Portable Auxiliary Fuel Tank Tool
US$ 45.00

Portable Auxiliary Fuel Tank Tool

#35-9120

Portable Auxiliary Fuel Tank, for Non Fuel Injection Systems. Includes 4 Feet of 1/4" fuel line and an inline fuel valve with 1/4" inlet and outlet. Fuel capacity 2 Litres. For use when tuning a motorcycle with the gas tank removed. Note: This tool is not to be used for long term fuel storage, for safety and to prevent accidental spillage, immediately drain gas back to approved long term storage container after use.

Honda CR250 Bearing Packer
US$ 28.00

Bearing Packer

#35-9122

Wheel Bearing Grease Packer. To pack a bearing, place the bearing on the piston, press down on the cap until the old grease is forced out and the new grease shows on top of the bearing. Grease stays in the tool cavity, not on your hands. Transparent, impact resistant cup allows easy grease level checks. Works on bearings up to 3-1/2" OD or 89mm.

Honda CR250 Deluxe Hose Clamps ~ 6.0mm ID
US$ 6.00

Deluxe Hose Clamps ~ 6.0mm ID

#73-0970

Deluxe Spring Hose Clamps - (Pk/10) (6.0mm ID).

Honda CR250 Deluxe Hose Clamps ~ 7.0mm ID
US$ 6.00

Deluxe Hose Clamps ~ 7.0mm ID

#73-0971

Deluxe Spring Hose Clamps - (Pk/10) (7.0mm ID).

Honda CR250 Deluxe Hose Clamps ~ 7.7mm ID
US$ 6.00

Deluxe Hose Clamps ~ 7.7mm ID

#73-0972

Deluxe Spring Hose Clamps - (Pk/10) (7.7mm ID).

Honda CR250 Deluxe Hose Clamps ~ 9.2mm ID
US$ 6.00

Deluxe Hose Clamps ~ 9.2mm ID

#73-0973

Deluxe Spring Hose Clamps - (Pk/10) (9.2mm ID).

Honda CR250 Deluxe Hose Clamps ~ 10.0mm ID
US$ 6.00

Deluxe Hose Clamps ~ 10.0mm ID

#73-0974

Deluxe Spring Hose Clamps - (Pk/10) (10.0mm ID).

Honda CR250 Deluxe Hose Clamps ~ 11.0mm ID
US$ 6.00

Deluxe Hose Clamps ~ 11.0mm ID

#73-0975

Deluxe Spring Hose Clamps - (Pk/10) (11.0mm ID).

Honda CR250 Deluxe Hose Clamps ~ 12.0mm ID
US$ 6.00

Deluxe Hose Clamps ~ 12.0mm ID

#73-0976

Deluxe Spring Hose Clamps - (Pk/10) (12.0mm ID).

Honda CR250 Deluxe Hose Clamps ~ 13.0mm ID
US$ 6.00

Deluxe Hose Clamps ~ 13.0mm ID

#73-0977

Deluxe Spring Hose Clamps - (Pk/10) (13.0mm ID).

Honda CR250 Deluxe Hose Clamps ~ 8.5mm ID
US$ 6.00

Deluxe Hose Clamps ~ 8.5mm ID

#73-0978

Deluxe Spring Hose Clamps - (Pk/10) (8.5mm ID).

The names Honda, Yamaha, Kawasaki, Suzuki and any other trade names or symbols belonging to each respective corporation are stated for reference purposes only. The products on this site are after market (not OEM) replacement parts and accessories only. We have no relationship to the listed companies.