Honda ► GL1000 ►
-
Here’s our hand-picked list of parts and accessories for your Honda GL1000 with universal parts included►
- Honda
Footrest Rubbers
Footrest Rubbers Pk/2 OEM Ref # 50661-369-000
Seat Rubber "B"
Seat Setting Rubber "B". This is one of the Rubber Settings Under the Seat. Replace those old worn Rubbers with a brand new one! Replaces OEM # 77205-286-000 Order the Quantity of Seat Rubber "B" your Bike Requires
Side Stand Rubber
Side Stand Rubber Cushion. Replaces OEM # 50548-356-700
Fuel Tank Emblem
Fuel Tank Emblem, Replaces OEM# 87121-371-000 / 87122-371-660 / 87121-371-660 / 87121-371-980 Sold Each, Order the Quantity you Require
Replacement Mirror
Replacement Mirror (R.H) 4 1/2" Diameter, 10mm Thread. Replaces OEM# 88110-333-611
Replacement Mirror
Replacement Mirror (L.H) 4 1/2" Diameter, 10mm Thread. Replaces OEM# 88120-333-611
CB Black Mirror - Original Type (Left Side)
Gloss Black CB Style Left Side Mirror - 4 1/2" Diameter with 10mm. RH Thread & 7" Stems.
CB Black Mirror - Original Type (Right Side)
Gloss Black CB Style Right Side Mirror - 4 1/2" Diameter with 10mm. RH Thread & 7" Stems.
Passenger Floorboard Set
Complete Passenger Floorboard Set Includes All Mounting Hardware
Center Stand Spring
Center Stand Spring. Replaces OEM # 95014-71702
Seat Cover GL1000 1975-77
Replacement Seat Cover with Reinforced Passenger Strap (No trim or hardware included just re-use existing hardware). There is not a "Honda" stencil on the rear of the cover due to copyright. Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Complete installation instructions as well as step by step instructions on how to repair damaged seat foam can be found in the instructions section of our website.. This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
Seat Cover GL1000 1978-79
Replacement Seat Cover with Reinforced Passenger Strap (No trim or hardware included just re-use existing hardware). There is not a "Honda" stencil on the rear of the cover due to copyright. Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Complete installation instructions as well as step by step instructions on how to repair damaged seat foam can be found in the instructions section of our website. This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
Side Cover Emblem
Cast Metal Side Cover Emblem with Attachment Clips. Replaces OEM # 87130-431-670 This is a Stock Type Replacement Emblem for the Honda GL1000K 1977-79 - Some 1977's used decals instead of emblems. Note: 2 Emblems Used Per Bike, Order the Quantity you Require
Cylinder Head Emblem
Cylinder Head Emblem with Attachment Clips, Replaces OEM# 12312-371-610 / 12312-371-611
Side Stand Spring
Side Stand Spring, Replaces OEM # 95014-72402
Brake Hose Rubber Grommet
Brake Hose Rubber Grommet, This is the Rubber Grommet that Attaches to the Brake Hose. Replaces OEM # 45146-300-000
Shock Absorber Joint Rubber Set/2
Shock Absorber Joint Rubber Set/2. Replaces OEM # 52484-292-000
Passenger Rear Footrest Rubber Set
Passenger Rear Footrest Rubber Set/2, Replaces OEM # 50716-371-660
Left Side Footrest Return Spring
Left Side Footrest Return Spring. This is the Spring that Allows the Left Side Footpeg to be Lowered and Raised. Replaces OEM # 50644-300-670
Footrest Rubbers
Footrest Rubbers (Set/2) - OEM Ref # 50661-405-000
Side Cover Emblem Fixing Nut Pk/2
Side Cover Emblem Fixing Nut (3mm) Pk/2, Used to Attach the Side Cover Emblems. Replaces OEM # 90313-567-000 Check your bike to see the quantity you require
Right Side Footrest Return Spring
Right Side Footrest Return Spring. This is the Spring that Allows the Right Side Footpeg to be Lowered and Raised. Replaces OEM # 50617-300-670
Side Cover Hardware Set
Side Cover Mounting Hardware Set. Includes Pin, Spring, Spring Seat and Pin. Replaces OEM# 83703-371-000, 83704-333-000, 83705-371-000, 94305-20142. This set is for one side cover, order 2 sets if you are doing both side covers.
Rear Fender Bolt Set
Rear Fender Bolt Set of 2, Replaces OEM# 90102-371-000 These are the large main bolts that go in the middle portion of the rear fender. The grab bar bolts thread into these fender bolts.
Side Cover Rubber
Side Cover Rubber, Replaces OEM# 83610-371-000 These are the rubbers at the top of each side cover that hold it in place. 2 Used per side cover - Sold Each - order the quantity you require.
Fuel Tank Rubber "C"
Fuel Tank Rubber "C" - Replaces OEM# 17616-371-000 This rubber is used with the stock bolt and collar to attach through the hole near the top of the fuel tank.
Battery Box Rubber
Battery Box Rubber, Replaces OEM# 83618-323-000 Sold Each, Order the Quantity you Require
Mounting Clamp ~ Black
Black Speedo/Tach/Mirror Mounting Clamp 2 Piece Die-Cast Alloy Clamp With 10mm RH Thread Fits 7/8" Bars
Viper Cafe Fairing
Universal Gloss Black Viper Cafe Racer Fairing with Smoked Windshield. Designed to protect the rider from wind pressure and debris. Mounting hardware included. Fits: Bikes With 7" or Smaller Headlights
Viper Cafe Fairing Shield
Replacement Shield Shield For Viper Café Fairing 04-0101
Custom Grey Windshield
Custom Grey Acrylic Windshield. Includes 2 fully adjustable 7/8" clamps attached to the windshield which can be adjusted in just about any angle and direction for an easy install. Width 18.3", Height 22"
Custom Clear Windshield
Custom Clear Acrylic Windshield. Includes 2 fully adjustable 7/8" clamps attached to the windshield which can be adjusted in just about any angle and direction for an easy install. Width 18.3", Height 22"
Custom Grey Windshield
Custom Grey Acrylic Windshield. Includes 2 fully adjustable 7/8" clamps attached to the windshield which can be adjusted in just about any angle and direction for an easy install. Width 16.25", Height 18"
Custom Clear Windshield
Custom Clear Acrylic Windshield. Includes 2 fully adjustable 7/8" clamps attached to the windshield which can be adjusted in just about any angle and direction for an easy install. Width 16.25", Height 18"
Venom Cafe Racer Fairing
Universal Gloss Black Venom Cafe Racer Fairing with Smoked Windshield. Designed to protect the rider from wind pressure and debris. Mounts by using the side bolts of your headlight. Fits: Bikes With 7" or Smaller Headlights
Chrome Goldwing Emblem Set/2
Chrome 3D Goldwing Emblem Set/2. Features a Sticker Back for Easy Application. These Custom Emblems Can Be Used Anywhere! 16.5cm Long x 1cm Width x 0.40cm Thickness
Gold Goldwing Emblem Set/2
Gold 3D Goldwing Emblem/Decal Set/2. Features a Sticker Back for Easy Application. These Custom Emblems Can Be Used Anywhere! 16.5cm Long x 1cm Width x 0.40cm Thickness
Custom Ribbed Chrome Crash Bar Highway Footpeg Set
Custom Ribbed Chrome Crash Bar Highway Footpeg Set/2. 1" & 1 1/4" Clamp.
Custom Pebble Chrome Crash Bar Highway Footpeg Set
Custom Pebble Chrome Crash Bar Highway Footpeg Set/2. 1" & 1 1/4" Clamp.
Custom Honda Chrome Crash Bar Highway Footpeg Set
Custom Honda Chrome Crash Bar Highway Footpeg Set/2. 1" & 1 1/4" Clamp.
Mirror Adaptor Set
Mirror Adaptor Set/2 10mm Adaptor for Yamaha left hand thread to standard type. Built In Rubber Damper to Reduce Vibrations
Mirror Adaptor Set
Mirror Adaptor Set/2 10mm Adaptor for Left Hand Threads.
American Classic Cruiser Mirror
American Classic Cruiser Mirror - Right Hand For Yamaha - Universal Fit Deep high polished chrome, classic teardrop style and extra heavy construction make this a favourite for all cruisers! 10mm Stem.
American Classic Cruiser Mirror
American Classic Cruiser Mirror - Left Hand For Yamaha - Universal Fit Deep high polished chrome, classic teardrop style and extra heavy construction make this a favourite for all cruisers! 10mm Stem.
Road Hawk Mirrors
Road Hawk "True Vision" Mirrors - Universal Fit - Right & Left Hand 10mm - 5" Stems - 3 1/4" x 5 1/4" Mirror Surface Matte Black - 10mm Thread
Napoleon Type Mirrors
Napoleon Type Mirrors Pk/2 - Universal Fit 5 1/8" x 3 5/16" Mirror Surface 10mm Thread - Matte Black Fits Right & Left
Replacement Mirror
Replacement Mirror - Fits Right or Left - Universal Fit Universal Rounded Rectangular Tinted Type 10mm Screw In Thread Chrome Plated
GP Sports Mirror Set
GP Sports Mirror Set/2 - Universal Fit - Right & Left Black, 10mm Thread. 4 1/4" x 3 5/16" Mirror Surface. Shock resistant. Wide Angle joint for easy setting.
GP Sports Mirror Set - For Yamaha
GP Sports Mirror Set - Universal Fit - Right & Left For Yamaha Black, 10mm Thread. 4 1/4" x 3 5/16" Mirror Surface. Shock resistant. Wide Angle joint for easy setting.
Road Hawk Mirrors - For Yamaha
Road Hawk "True Vision" Mirror Set/2 - Universal Fit - Right & Left Hand For Yamaha 10mm - 5" Stems - 3 1/4" x 5 1/4" Mirror Surface Matte Black - 10mm Thread