Honda ► GL1100 ►
-
Here’s our hand-picked list of parts and accessories for your Honda GL1100 with universal parts included that match “honda sl125”►
- Honda
Honda OEM Type Grips
Honda OEM Type Rubber Grip Set - Black - Closed end type for 7/8" bars. These are replica's of the original type grips from the factory. 130mm Length. Replaces OEM #' 53165-390-780 / 53166-390-780 / 53166-422-000 / 53165-422-000
Honda OEM Type Grips ~ Open End
Honda OEM Type Rubber Grips - Black - Open End Type with End Plugs Included - For 7/8" bars. These are replica's of the original type grips from the factory. 130mm Length. Replaces OEM #' 53165-390-780 / 53166-390-780 / 53166-422-000 / 53165-422-000
Honda GL1100 Goldwing 1980-83 Replica Handlebar
Honda GL1100 Goldwing 1980-83 Replica Handlebar. Replaces OEM # 53100-MB9-800 / 53100-MB9-670 / 53100-463-670 Thickness - 7/8" - 22mm Length - 32 1/8" - 820mm Pull Back - 10" - 254mm Inner Rise - 8 3/4" - 222mm End Rise - 10" - 254mm Center Width - 6 1/2" - 165mm Base Width - 9 1/2" - 241mm Knurl Width - 4 1/2" - 114mm Control Length - 10 1/2" - 266mm Drilled NO There are Holes For Switch Positioning
Front Cable/ Stop Switch Clip
Front Cable Clip, This Clip Holds the Stop Switch Wires to the Cable to Keep Things Tidy. Replaces OEM # 45465-270-000
Replacement Mirror
Replacement Mirror - Fits Right Or Left Honda LTD 8" Stem, 10mm Thread, Chrome Plated
Haynes Workshop Manual
Haynes Workshop Manual Honda GL1100 Gold Wing 1979-1981 1085cc
Ignition Spark Unit
Aftermarket Ignition Spark Unit for Honda - 2 units required per bike. Replaces Honda OKI or NEC units. Replaces OEM Ref # 30400-MA4-601
CB Black Mirror - Original Type - DOHC
Mirror - Honda Black Type - 8" Stem, 10mm. RH threads. Original Stock Type For: Honda CB750K (1979-82), CB750F (1979-82) Supersport, CB750L (1979) Limited, CB900F (1981-82) Supersport, GL1100 (1981-83) Will also fit Any Honda: CB Note: These Fit Both Left And Right Side Of Bike, Order 2 For A Complete Set
Speedometer / Tachometer Internal Rubber Seal
Speedometer / Tachometer Internal Rubber Seal. This internal rubber seal replaces the ripped, dried or missing rubber internal seal. This internal rubber seal fits to any stock type Honda CB750 ND brand gauges.
Master Cylinder Reservoir Cap
Master Cylinder Cap with Plastic O-Ring. Replaces OEM # 45513-341-771 This style of master cylinder cap was discontinued long ago by Honda. We have had these produced again to keep your bike looking sharp. Spruce up your Master Cylinder with one of these great looking master cylinder caps!
Black Seat Cover Set GL1100 1983
Replacement Black Seat Cover Set (No trim or hardware included just re-use existing hardware). There is a layer of foam sewn into the top if the seat cover to improve ride comfort and smooth out any defects in the seat foam. There is not a "Honda" stencil on the rear of the cover due to copyright. Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Complete installation instructions as well as step by step instructions on how to repair damaged seat foam can be found in the instructions section of our website. This is for the SEAT COVER, Not the Full Seat.
Black Seat Cover Set GL1100 1980-82
Replacement Black Seat Cover Set (No trim or hardware included just re-use existing hardware). There is a layer of foam sewn into the top if the seat cover to improve ride comfort and smooth out any defects in the seat foam. There is not a "Honda" stencil on the rear of the cover due to copyright. Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Complete installation instructions as well as step by step instructions on how to repair damaged seat foam can be found in the instructions section of our website. This is for the SEAT COVER, Not the Full Seat.
Full Gray/Black Cover Set GL1100 1980-82
Replacement Full Gray/Black Cover Set. Includes the Seat Cover, Back Rest Cover, and 2 Pouches. (No trim or hardware included just re-use existing hardware). There is a layer of foam sewn into the top if the seat cover to improve ride comfort and smooth out any defects in the seat foam. There is not a "Honda" stencil on the rear of the cover due to copyright.. Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Complete installation instructions as well as step by step instructions on how to repair damaged seat foam can be found in the instructions section of our website. This is for the COVERS, Not the Full Seat.
Full Black Cover Set GL1100 1980-82
Replacement Full Black Cover Set. Includes the Seat Cover, Back Rest Cover, and 2 Pouches. (No trim or hardware included just re-use existing hardware). There is a layer of foam sewn into the top if the seat cover to improve ride comfort and smooth out any defects in the seat foam. There is not a "Honda" stencil on the rear of the cover due to copyright. Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Complete installation instructions as well as step by step instructions on how to repair damaged seat foam can be found in the instructions section of our website. This is for the COVERS, Not the Full Seat.
GL1100 1981-82 Warning and Service Label Set
Honda GL1100 1981-82 Goldwing ~ Warning & Service Label (Sticker) Set. This set includes several warning and service labels that were originally found on these bikes when new. You'll find the quality & accuracy of these decals second to none and accurate in every detail. These reproductions will add the finishing touch to your restoration. This 9 piece warning & service label set includes: 1 - Important Information (tire info) 1 - Accessories & Loading: Warning 1 - Caution: Battery 1 - Caution: Radiator 1 - Helmet Holder 1 - Rear Suspension Air Pressure 1 - Exhaust Modification Warning 1 - Remember: Preserve Nature (helmet warning) - Printed on Clear 1 - Reserve Tank: Coolant Level - Printed on White These decals are no longer available from the manufacturer. All decals are "printed" on the highest quality materials from companies such as 3M and Avery. All decals have a protective coating to resist scratching and to protect colors from UV rays. These decals are adhesive backed for simple application.
Exhaust Valve
Exhaust Valve OEM Ref # 14721-371-000 / 14721-371-405 Made In Japan
Passenger Floorboard Set
Complete Passenger Floorboard Set Includes All Mounting Hardware
Float Needle & Seat
Float Needle & Seat High Quality - Made In Japan OEM Ref # 16011-MB9-004
Float Needle & Seat
Float Needle & Seat High Quality - Made In Japan OEM Ref # 16011-679-005
GL1100 1981-82 Complete Decal Set ~ Candy Wineberry Red Model
GL1100 1981-82 Complete 14 Pc. Decal (Sticker) Set for the Candy Wineberry Red Model. Includes - Tank side stripes, Tank top stripes, Side cover stripes, Front fender stripes and Rear fender stripes. These reproductions will add the finishing touch to your restoration. These decals are no longer available from the manufacturer. All decals are "printed" on the highest quality materials from companies such as 3M and Avery. All decals have a protective coating to resist scratching and to protect colors from UV rays. These decals are adhesive backed for simple application.
GL1100 1981-82 Complete Decal Set ~ Black Model
GL1100 1981-82 Complete 14 Pc. Decal (Sticker) Set for the Black Model. Includes - Tank side stripes, Tank top stripes, Side cover stripes, Front fender stripes and Rear fender stripes. These reproductions will add the finishing touch to your restoration. These decals are no longer available from the manufacturer. All decals are "printed" on the highest quality materials from companies such as 3M and Avery. All decals have a protective coating to resist scratching and to protect colors from UV rays. These decals are adhesive backed for simple application.
Intake Valve
Intake Valve OEM Ref # 14711-371-000 Made In Japan
Rear Fender Bolt Set
Rear Fender Bolt Set of 2, Replaces OEM# 90102-371-000 These are the large main bolts that go in the middle portion of the rear fender. The grab bar bolts thread into these fender bolts.
Turn Signal Replacement Lens ~ Smoked
Turn Signal Replacement Lens - Smoked - Front Or Rear OEM Ref # 33402-431-782
Tail Light Lens Screws
Tail Light Lens Screws, Set of 4. Replaces OEM # 90147-147-671