HondaGL1100I ► 

Refine Search Results
Honda GL1100I Replacement Coil Caps & Seals
USD$ 5.15
Listed Models

Replacement Coil Caps & Seals

#17-6804 | Honda GL1100I (1980-1981)

Replacement Coil tower caps & seals. Fits stock points ignition coils OR our part number 17-6803.

USD$ 5.15
Listed Models
Honda GL1100I Engine Gasket Set
USD$ 184.95
Listed Models

Engine Gasket Set

#18-0124 | Honda GL1100I (1980-1984)

Complete Engine Gasket Set Includes all Engine Gaskets High Quality - Made In Italy by Athena Athena Product # P400210850976

USD$ 184.95
Listed Models
Honda GL1100I Complete Gasket Set
USD$ 140.55
Listed Models

Complete Gasket Set

#18-0452 | Honda GL1100I (1980-1983)

Brand New complete gasket set. Sealed Complete (Top + Bottom End). The Gaskets come with Silicone Line Coatings, Non Asbestos, Special Chemical & Mixture have been treated to the Gasket materials in order to withstand high Pressure oil resistance. All gaskets needed to do a complete overhaul on the engine. Includes all items pictured.

USD$ 140.55
Listed Models
Honda GL1100I Top End Engine Gasket Set
USD$ 73.95
Listed Models

Top End Engine Gasket Set

#18-0459 | Honda GL1100I (1980-1983)

Brand New Top End Gasket Set. The Gaskets come with Silicone Line Coatings, Non Asbestos, Special Chemical & Mixture have been treated to the Gasket materials in order to withstand high Pressure oil resistance. Includes all items pictured. ISO 9001 Standards.

USD$ 73.95
Listed Models
Honda GL1100I Goldwing Key Chain
USD$ 9.95
Listed Models

Goldwing Key Chain

#19-0087 | Honda GL1100I (1980-1983)

Goldwing Key Chain with Carbon Pattern Background

USD$ 9.95
Listed Models
Honda GL1100I Air Cut Off Valve
USD$ 17.00
Listed Models

Air Cut Off Valve

#20-4020 | Honda GL1100I (1980-1983)

Air Cut Off Valve OEM Ref # 16048-429-771 / 16048-425-771

USD$ 17.00
Listed Models
Honda GL1100I Carb Float
USD$ 22.15
Listed Models

Carb Float

#20-6506 | Honda GL1100I (1980-1983)

Carb Float with Pin, Replaces OEM # 16013-679-005 Note: Order the Quantity of Floats you Require

USD$ 22.15
Listed Models
Honda GL1100I Carb Pump Diaphragm
USD$ 14.75
Listed Models

Carb Pump Diaphragm

#20-9041 | Honda GL1100I (1980-1983)

Carb Pump Diaphragm OEM Ref # 16021-413-751 / 16021-438-671 / 16021-463-004

USD$ 14.75
Listed Models
Honda GL1100I Negative (-) Battery Cable
USD$ 20.70
Listed Models

Negative (-) Battery Cable

#23-2700 | Honda GL1100I (1980-1983)

Negative (-) Battery Cable (Ground Cable). Replaces OEM # 32601-MG9-000

USD$ 20.70
Listed Models
Honda GL1100I Starter Solenoid Switch
USD$ 29.55
Listed Models

Starter Solenoid Switch

#24-2004 | Honda GL1100I (1980-1983)

Starter Solenoid Switch, Four-gang plug and a 30-Amp fuse with cable attachment.

USD$ 29.55
Listed Models
Honda GL1100I Rectifier Regulator
USD$ 125.75
Listed Models

Rectifier Regulator

#24-2017 | Honda GL1100I (1980-1983)

Rectifier Regulator 8 Wire Connector Block OEM Re # 31600-MG9-000 / 31600-MG9-010 / 31600-463-000

USD$ 125.75
Listed Models
Honda GL1100I Alternator Stator
USD$ 147.95
Listed Models
Out of Stock
Email Me When Available

Alternator Stator

#24-2057 | Honda GL1100I (1980-1983)

Alternator Stator OEM Ref # 31120-MB9-003 / 31110-MG9-305 / 31110-MG9-315 / 31110-MG9-325

USD$ 147.95
Listed Models
Out of Stock
Email Me When Available
Honda GL1100I Sub-Wire Harness "A"
USD$ 8.85
Listed Models

Sub-Wire Harness "A"

#24-4011 | Honda GL1100I (1980-1981)

Sub-Wire Harness "A", Replaces OEM # 32103-438-660 Plugs into the main wire harness and connects to the ignition coils. This item is not included with our main wire harness's. Please order this item if you require this sub-wire harness "A".

USD$ 8.85
Listed Models
Honda GL1100I Starter Clutch Repair Kit
USD$ 29.55
Listed Models

Starter Clutch Repair Kit

#24-5001 | Honda GL1100I (1980-1983)

Starter Clutch Repair Kit

USD$ 29.55
Listed Models
Honda GL1100I Rick's Electrics ~ Performance Style Rectifier Regulator
USD$ 147.95
Listed Models

Rick's Electrics ~ Performance Style Rectifier Regulator

#24-6003 | Honda GL1100I (1980-1983)

Rick's Electrics Brand Performance Hot Shot Rectifier Regulator. Specially designed for optimal performance and a cooler running rectifier regulator. Replaces OEM# 31600-MG9-010 - This is a direct plug in but will eliminate the use of the black signal wire.

USD$ 147.95
Listed Models
Honda GL1100I Rick's Electrics -  Lithium Ion Battery Compatible Rectifier Regulator
USD$ 147.95
Listed Models

Rick's Electrics - Lithium Ion Battery Compatible Rectifier Regulator

#24-6004 | Honda GL1100I (1980-1983)

Rick's Electrics Brand Lithium Ion Battery Compatible Style Rectifier / Regulator. Designed with a lower voltage set point (As used in Lithium Ion Batteries). This direct plug and play unit replaces OEM# 31600-MG9-010 - Not for use with standard lead acid batteries.

USD$ 147.95
Listed Models
Honda GL1100I Rick's Electrics Brand ~ Ignition Coil
USD$ 81.35
Listed Models

Rick's Electrics Brand ~ Ignition Coil

#24-6011 | Honda GL1100I (1980-1983)

Rick's Electrics Brand Replacement Ignition Coil - OEM Ref# 21121-1310, 21121-1039 , 21121-1309,21121-1038 , 21121-1041 , 21121-1036 , 21121-1035 , 21121-1110 , 21121-1111 , 30510-MA6-013 , 30510-MA6-003 , 30510-MR7-003 , 30500-422-013 , 30500-422-003 , 30505-MB9-003. Note: 2 Coils Used per Bike, Order the Quantity you Require Note: Comes with Wires Attached

USD$ 81.35
Listed Models
Honda GL1100I Honda GL1100 Goldwing 1980-83 Replica Handlebar
USD$ 73.95
Listed Models

Honda GL1100 Goldwing 1980-83 Replica Handlebar

#25-0138 | Honda GL1100I (1980-1983)

Honda GL1100 Goldwing 1980-83 Replica Handlebar. Replaces OEM # 53100-MB9-800 / 53100-MB9-670 / 53100-463-670 Thickness - 7/8" - 22mm Length - 32 1/8" - 820mm Pull Back - 10" - 254mm Inner Rise - 8 3/4" - 222mm End Rise - 10" - 254mm Center Width - 6 1/2" - 165mm Base Width - 9 1/2" - 241mm Knurl Width - 4 1/2" - 114mm Control Length - 10 1/2" - 266mm Drilled NO There are Holes For Switch Positioning

USD$ 73.95
Listed Models
Honda GL1100I Fork Seals
USD$ 14.00
Listed Models

Fork Seals

#27-1029 | Honda GL1100I (1980-1983)

Fork Seals Set/2 39 X 52 X 11

USD$ 14.00
Listed Models
Honda GL1100I Fork Dust Seals
USD$ 14.75
Listed Models

Fork Dust Seals

#27-1048 | Honda GL1100I (1980-1983)

Fork Dust Seals Set/2 39 X 58 OEM Ref # 91254-463-003

USD$ 14.75
Listed Models
Honda GL1100I Wheel Seal Kit
USD$ 5.15
Listed Models

Wheel Seal Kit

#27-9018 | Honda GL1100I (1980-1982)

Front Wheel Seal Kit 2 Seals 22 x 36 x 8 40 x 50 x 5

USD$ 5.15
Listed Models
Honda GL1100I Wheel Seal Kit
USD$ 5.15
Listed Models
Out of Stock
Email Me When Available

Wheel Seal Kit

#27-9019 | Honda GL1100I (1983)

Front Wheel Seal Kit 2 Seals 22 x 42 x 7 40 x 50 x 5

USD$ 5.15
Listed Models
Out of Stock
Email Me When Available
Honda GL1100I Wheel Seal Kit
USD$ 2.90
Listed Models

Wheel Seal Kit

#27-9043 | Honda GL1100I (1980-1982)

Rear Wheel Seal Kit 1 Seal 30 x 45 x 9.5

USD$ 2.90
Listed Models
Honda GL1100I Wheel Seal Kit
USD$ 2.90
Listed Models

Wheel Seal Kit

#27-9044 | Honda GL1100I (1983)

Rear Wheel Seal Kit 1 Seal 30 x 52 x 7

USD$ 2.90
Listed Models
Honda GL1100I Steering Bearing Kit
USD$ 39.95
Listed Models

Steering Bearing Kit

#28-2006 | Honda GL1100I (1980-1983)

Tapered Roller Steering Bearing Conversion Kit. Superior to OEM quality, 10X the contact area and less flex. Designed as a drop in replacement for the original bearing. Kit is complete with upper and lower tapered bearing races. High quality made in Japan.

USD$ 39.95
Listed Models
Honda GL1100I Front Wheel Bearing Retainer
USD$ 10.75
Listed Models

Front Wheel Bearing Retainer

#28-4016 | Honda GL1100I (1980-1982)

Front Wheel Bearing Retainer - Replaces OEM# 44643-300-000

USD$ 10.75
Listed Models
Honda GL1100I Brake Caliper Rebuild Kit
USD$ 36.95
Listed Models

Brake Caliper Rebuild Kit

#29-0002 | Honda GL1100I (1982)

Brake Caliper Rebuild Kit Front - Dual

USD$ 36.95
Listed Models
Honda GL1100I Brake Caliper Rebuild Kit
USD$ 36.95
Listed Models

Brake Caliper Rebuild Kit

#29-0003 | Honda GL1100I (1980-1981)

Brake Caliper Rebuild Kit Front - Dual

USD$ 36.95
Listed Models
Honda GL1100I Brake Caliper Rebuild Kit
USD$ 29.55
Listed Models

Brake Caliper Rebuild Kit

#29-0007B | Honda GL1100I (1983)

Brake Caliper Rebuild Kit Rear - Single

USD$ 29.55
Listed Models
Honda GL1100I Brake Caliper Rebuild Kit
USD$ 51.75
Listed Models

Brake Caliper Rebuild Kit

#29-0009 | Honda GL1100I (1983)

Brake Caliper Rebuild Kit Front - Dual

USD$ 51.75
Listed Models
Honda GL1100I Brake Caliper Rebuild Kit
USD$ 24.40
Listed Models

Brake Caliper Rebuild Kit

#29-0012 | Honda GL1100I (1980-1981)

Brake Caliper Rebuild Kit Rear - Single

USD$ 24.40
Listed Models
Honda GL1100I Brake Caliper Rebuild Kit
USD$ 23.65
Listed Models

Brake Caliper Rebuild Kit

#29-0013B | Honda GL1100I (1982)

Brake Caliper Rebuild Kit Rear - Single

USD$ 23.65
Listed Models
Honda GL1100I Master Cylinder Reservoir Kit
USD$ 51.75
Listed Models

Master Cylinder Reservoir Kit

#29-0050 | Honda GL1100I (1980-1981)

Master Cylinder Reservoir Kit - Front 4 Screw Cover Note: When installing use the diaphragm plate from the old master cylinder with this kit.

USD$ 51.75
Listed Models
Honda GL1100I Master Cylinder Reservoir Kit
USD$ 36.95
Listed Models

Master Cylinder Reservoir Kit

#29-0051 | Honda GL1100I (1982-1983)

Master Cylinder Reservoir Kit - Front 2 Screw Cover

USD$ 36.95
Listed Models
Honda GL1100I Master Cylinder Reservoir Cap
USD$ 29.55
Listed Models

Master Cylinder Reservoir Cap

#29-0054 | Honda GL1100I (1980-1983)

Master Cylinder Cap with Plastic O-Ring. Replaces OEM # 45513-341-771 This style of master cylinder cap was discontinued long ago by Honda. We have had these produced again to keep your bike looking sharp. Spruce up your Master Cylinder with one of these great looking master cylinder caps!

USD$ 29.55
Listed Models
Honda GL1100I Master Cylinder Reservoir Cap Plastic O-Ring
USD$ 2.90
Listed Models

Master Cylinder Reservoir Cap Plastic O-Ring

#29-0062 | Honda GL1100I (1980-1983)

Master Cylinder Reservoir Cap Plastic O-Ring, Replaces OEM # 45521-MJ6-006

USD$ 2.90
Listed Models
Honda GL1100I Master Cylinder Cover
USD$ 9.60
Listed Models

Master Cylinder Cover

#29-0071 | Honda GL1100I (1983)

Master Cylinder Cover 2 Screw Type Chrome - No Logo OEM Ref # 45513-MA5-671 / 45513-413-941

USD$ 9.60
Listed Models
Honda GL1100I Reservoir Cap & Diaphragm
USD$ 14.75
Listed Models

Reservoir Cap & Diaphragm

#29-0080 | Honda GL1100I (1980-1982)

Reservoir Cap & Diaphragm Round Thread On Type OEM Ref # 43515-MJ6-006 / 45520-300-000

USD$ 14.75
Listed Models
Honda GL1100I Brake Caliper Piston
USD$ 17.00
Listed Models

Brake Caliper Piston

#29-0509 | Honda GL1100I (1982)

Brake Caliper Piston - Front 30mm x 35mm OEM Ref # 45107-MA3-006

USD$ 17.00
Listed Models
Honda GL1100I Brake Caliper Piston
USD$ 17.00
Listed Models

Brake Caliper Piston

#29-0509B | Honda GL1100I (1982)

Brake Caliper Piston - Rear 30mm x 35mm OEM Ref # 45107-MA3-006

USD$ 17.00
Listed Models
Honda GL1100I Brake Caliper Piston
USD$ 24.40
Listed Models

Brake Caliper Piston

#29-0510 | Honda GL1100I (1983)

Brake Caliper Piston - Front 32mm x 35mm OEM Ref # 43107-MA7-006

USD$ 24.40
Listed Models
Honda GL1100I Brake Caliper Piston
USD$ 24.40
Listed Models

Brake Caliper Piston

#29-0510B | Honda GL1100I (1983)

Brake Caliper Piston - Rear 32mm x 35mm OEM Ref # 43107-MA7-006

USD$ 24.40
Listed Models
Honda GL1100I Front Brake Caliper Piston Sealing Ring
USD$ 3.65
Listed Models

Front Brake Caliper Piston Sealing Ring

#29-0529 | Honda GL1100I (1980-1981)

Front Brake Caliper Piston Sealing Ring, Replaces OEM # 45215-533-004

USD$ 3.65
Listed Models
Honda GL1100I Front Brake Caliper Piston (25.4mm Diameter)
USD$ 19.20
Listed Models

Front Brake Caliper Piston (25.4mm Diameter)

#29-0536 | Honda GL1100I (1983)

Front Brake Caliper Piston - 25.4mm Outside Diameter x 35mm Height - OEM Ref # 45107-MB9-781. (Order the Quantity you Require). Note: Many bikes use 2 different piston types/sizes on the front. These are the Smaller front pistons, please confirm you need these 25.4mm diameter pistons before ordering.

USD$ 19.20
Listed Models
Honda GL1100I Speedo Gear Plug
USD$ 25.85
Listed Models

Speedo Gear Plug

#29-0538 | Honda GL1100I (1980-1982)

Speedo Gear Plug - Plug 15mm Outer Diameter, 22mm Long. This Plug is Great for Keeping your Original Speedo Drive Gear Clean.

USD$ 25.85
Listed Models
Honda GL1100I Front Brake Pads
USD$ 18.45
Listed Models

Front Brake Pads

#29-3532 | Honda GL1100I (1982-1983)

Front Brake Pads Pk/2 OEM Ref # 45105-443-762

USD$ 18.45
Listed Models
Honda GL1100I Brake Pads
USD$ 19.95
Listed Models

Brake Pads

#29-3533b | Honda GL1100I (1982-1983)

Rear Brake Pads Pk/2 OEM Ref # 43105-MA3-007

USD$ 19.95
Listed Models
Honda GL1100I Brake Pads
USD$ 18.45
Listed Models
Out of Stock
Email Me When Available

Brake Pads

#29-3546b | Honda GL1100I (1980-1981)

Rear Brake Pads Pk/2 OEM Ref # 43105-461-771

USD$ 18.45
Listed Models
Out of Stock
Email Me When Available
Honda GL1100I Brake Pads
USD$ 19.20
Listed Models
Out of Stock
Email Me When Available

Brake Pads

#29-3547 | Honda GL1100I (1980-1981)

Front Brake Pads Pk/2 OEM Ref # 45105-438-007

USD$ 19.20
Listed Models
Out of Stock
Email Me When Available
Honda GL1100I Front Sintered Metal Brake Pad Set
USD$ 17.70
Listed Models

Front Sintered Metal Brake Pad Set

#29-3553 | Honda GL1100I (1980-1981)

Front Brake Pad Set - Sintered Metal - 67 x 49.5 x 9.5mm. OEM # 45105-410-305 / 45105-461-771 / 45105-461-772 / 45105-438-004 / 45105-438-007 / 45105-438-008

USD$ 17.70
Listed Models
The names Honda, Yamaha, Kawasaki, Suzuki and any other trade names or symbols belonging to each respective corporation are stated for reference purposes only. The products on this site are after market (not OEM) replacement parts and accessories only. We have no relationship to the listed companies.