Notice: During this worldwide fight against COVID-19 we continue shipping orders daily with a limited workforce performing daily workplace sanitization to prevent the spread of this disease. Thank you for your support during this time and we hope you and your family stay safe.

HondaGL500I ► 

Refine Search Results
Honda GL500I Cylinder Head Cover Gasket
USD$ 7.50
Fits: GL500I (81-82)

Cylinder Head Cover Gasket

#48-9990 | Honda GL500I (1981-1982)

Cylinder Head Cover Gasket - Replaces OEM# 12328-415-000 Note: 2 used per bike, order the quantity you require.

Honda GL500I Clutch Cover Gasket
USD$ 7.50
Fits: GL500I (81-82)

Clutch Cover Gasket

#48-9991 | Honda GL500I (1981-1982)

Clutch Cover Gasket - Replaces OEM# 11372-449-700 / 11372-449-306 / 11372-415-000

Honda GL500I Camshaft Holder Gasket
USD$ 2.95
Fits: GL500I (81-82)

Camshaft Holder Gasket

#48-9993 | Honda GL500I (1981-1982)

Camshaft Holder Gasket - Replaces OEM# 12230-415-306 / 12230-449-700 / 12230-415-000

Honda GL500I Rear Engine Casing Gasket
USD$ 12.95
Fits: GL500I (81-82)

Rear Engine Casing Gasket

#48-9996 | Honda GL500I (1981-1982)

Rear Engine Casing Gasket - Replaces OEM# 11394-449-306 / 11394-449-701 / 11394-415-010

Honda GL500I Water Pump Base Gasket
USD$ 4.95
Fits: GL500I (81-82)

Water Pump Base Gasket

#48-9997 | Honda GL500I (1981-1982)

Water Pump Base Gasket - Replaces OEM# 11396-415-000

Honda GL500I Cylinder Head Gasket
USD$ 11.50
Fits: GL500I (81-82)

Cylinder Head Gasket

#48-9998 | Honda GL500I (1981-1982)

Cylinder Head Gasket - Replaces OEM# 12251-415-306 / 12251-415-014 / 12251-415-024 Note: 2 used per bike, order the quantity you require.

Honda GL500I Transmission Cover Gasket
USD$ 9.95
Fits: GL500I (81-82)

Transmission Cover Gasket

#48-9999 | Honda GL500I (1981-1982)

Transmission Cover Gasket - Replaces OEM# 11391-415-000 / 11391-449-306 / 11391-449-700

Honda GL500I Steering Stem Nut
USD$ 11.95
Fits: GL500I (81-82)

Steering Stem Nut

#49-0786 | Honda GL500I (1981-1982)

Chrome Steering Stem Nut, Hex Nut Size 30mm. Replaces OEM # 90304-415-000 Note: Sold Each, order the quantity your require

Honda GL500I Steering Stem Washer
USD$ 3.25
Fits: GL500I (81-82)

Steering Stem Washer

#49-0787 | Honda GL500I (1981-1982)

Chrome Steering Stem Washer, Replaces OEM # 90503-283-000 Sold Each, order the quantity you require.

Honda GL500I Side Stand Spring
USD$ 4.50
Fits: GL500I (81-82)

Side Stand Spring

#49-0788 | Honda GL500I (1981-1982)

Side Stand Spring, Replaces OEM # 95014-72402

Honda GL500I Clutch Cable
USD$ 12.95
Fits: GL500I (81-82)

Clutch Cable

#51-0748 | Honda GL500I (1981-1982)

Clutch Cable, Replaces OEM# 22870-MA1-000 , 22870-ME2-000

Honda GL500I Speedometer Cable
USD$ 13.00
Fits: GL500I (81-82)

Speedometer Cable

#51-2305 | Honda GL500I (1981-1982)

Speedometer Cable - Black - OEM Ref. # 44830-356-000 / 44830-426-830 Made in Japan

Honda GL500I Clymer Service Manual
USD$ 32.00
Fits: GL500I (81-82)
Out of Stock

Clymer Service Manual

#61-0054 | Honda GL500I (1981-1982)

Clymer Service Manual. Clymer motorcycle repair manuals are written specifically for the do-it-yourself enthusiast. From basic maintenance to troubleshooting to complete overhaul, Clymer manuals provide the information you need.

Honda GL500I Haynes Workshop Manual
USD$ 32.00
Fits: GL500I (81-82)

Haynes Workshop Manual

#61-0055 | Honda GL500I (1981-1982)

Haynes Workshop Manual. Feature clear step by step instructions covering the dismantling, inspection, repair and refitting of the engine, clutch and gearbox, cooling system, fuel and lubrication systems, ignition and exhaust systems, frame and fork, wheels, brakes and tires and the electrical system. Routine maintenance, complete specifications and detailed fault diagnosis procedures are also included.

Honda GL500I OEM Type Gas/Fuel Tank Cap
USD$ 27.00
Fits: GL500I (81-82)

OEM Type Gas/Fuel Tank Cap

#65-6508 | Honda GL500I (1981-1982)

OEM Type Gas/Fuel Tank Cap with Gasket and 2 Keys. Replaces OEM # 17620-460-067

Honda GL500I Starter Motor Terminal Rubber Boot
USD$ 4.50
Fits: GL500I (81-82)

Starter Motor Terminal Rubber Boot

#73-0092 | Honda GL500I (1981-1982)

Starter Motor Terminal (Cover) Rubber Boot. Replaces OEM # 32411-230-000

Honda GL500I Master Cylinder Rubber Boot
USD$ 7.50
Fits: GL500I (81-82)

Master Cylinder Rubber Boot

#73-0094 | Honda GL500I (1981-1982)

Master Cylinder Rubber Boot. Replaces OEM # 45522-422-000

Honda GL500I Handlebar Rubber Boot
USD$ 12.95
Fits: GL500I (81-82)

Handlebar Rubber Boot

#73-0095 | Honda GL500I (1981-1982)

Handlebar Rubber Boot. Replaces OEM # 53180-425-010

Honda GL500I Speedo/Tachometer Meter Cushion
USD$ 13.95
Fits: GL500I (81-82)

Speedo/Tachometer Meter Cushion

#73-0096 | Honda GL500I (1981-1982)

Speedo/Tachometer Meter Cushion, Replaces OEM # 37235-323-700

Honda GL500I Fuse Box Assembly
USD$ 39.95
Fits: GL500I (81-82)

Fuse Box Assembly

#73-0126 | Honda GL500I (1981-1982)

Fuse Box Assembly Complete with 10Amp Fuses, Replaces OEM # 38200-425-005

Honda GL500I Rear Brake Rod Assembly
USD$ 25.00
Fits: GL500I (81-82)

Rear Brake Rod Assembly

#73-0182 | Honda GL500I (1981-1982)

Rear Brake Rod Assembly, Includes Brake Rod, Spring, Brake Arm Joint, Brake Rod Adjusting Nut, Brake Rod Joint Pin and Cotter Pin.

Honda GL500I Passenger Rear Footrest Rubber Set
USD$ 15.00
Fits: GL500I (81-82)

Passenger Rear Footrest Rubber Set

#73-0184 | Honda GL500I (1981-1982)

Passenger Rear Footrest Rubber Set/2, Replaces OEM # 50716-371-660

Honda GL500I Front Wheel Bearing Retainer Ring Tool
USD$ 26.00
Fits: GL500I (81-82)

Front Wheel Bearing Retainer Ring Tool

#73-0186 | Honda GL500I (1981-1982)

Front Wheel Bearing Retainer Ring Tool. High quality tool for removing and fitting the front wheel bearing retainer ring with 1/2 inch socket bar wrench tool hole. The perfect tool for easier removal and fitting without damaging the special retainer ring.

Honda GL500I Starter Solenoid Relay
USD$ 26.00
Fits: GL500I (81-82)

Starter Solenoid Relay

#73-0824 | Honda GL500I (1981-1982)

Starter Solenoid Relay with Fuse. Replaces OEM # 35850-MB0-007

Honda GL500I Oil Pressure Switch
USD$ 16.00
Fits: GL500I (81)

Oil Pressure Switch

#73-0825 | Honda GL500I (1981)

Oil Pressure Switch, Replaces OEM # 37240-P13-013

Honda GL500I Brake Rod Joint
USD$ 2.00
Fits: GL500I (81-82)

Brake Rod Joint

#73-0843 | Honda GL500I (1981-1982)

Brake Rod/Arm Joint, Replaces OEM # 95015-32001

Honda GL500I Starter Clutch Roller Spring
USD$ 1.75
Fits: GL500I (81-82)

Starter Clutch Roller Spring

#73-0856 | Honda GL500I (1981-1982)

Starter Clutch Roller Spring, Replaces OEM # 28125-516-030 Sold Each, Order the Quantity you Require

Honda GL500I Water Temperature Sending Unit
USD$ 24.00
Fits: GL500I (81-82)

Water Temperature Sending Unit

#73-0860 | Honda GL500I (1981-1982)

Water Temperature Sending Unit, Replaces OEM # 37750-611-154

Honda GL500I Tach Drive Plug Block Off w O-Ring
USD$ 18.00
Fits: GL500I (81-82)

Tach Drive Plug Block Off w O-Ring

#73-0884 | Honda GL500I (1981-1982)

Tach Drive Plug (Block Off) with O-ring. This plug is generally used when the tachometer cable drive is removed and still needs to be blocked off to prevent oil leakage. This plug has an o-ring groove machined in it for better sealing. Several bike builders just cut the stock cable off and left the Honda cable drive end installed in the valve cover. This plug is a much cleaner option in both functionality and looks. These plugs are a real nice touch when you are not using the stock tachometer, and need to eliminate the cable, or are using an electronic tach. Installs in about a minute, no need to remove the valve cover to remove the tach drive gear assy. Fits tachometer cables that are approximately 15mm in diameter with a 10.5mm groove and held in place with a screw.

Honda GL500I Fuse Box Plate Cover Screw Set
USD$ 2.95
Fits: GL500I (81-82)

Fuse Box Plate Cover Screw Set

#73-0897 | Honda GL500I (1981-1982)

Black Fuse Box Plate Cover Screw (Set of 2). Replaces OEM # 93700-05020-0G

Honda GL500I Tail Light Lens Screws
USD$ 5.00
Fits: GL500I (81-82)

Tail Light Lens Screws

#73-0899 | Honda GL500I (1981-1982)

Tail Light Lens Screws, Set of 4. Replaces OEM # 90147-147-671

Honda GL500I Footrest Rubbers
USD$ 18.00
Fits: GL500I (81-82)

Footrest Rubbers

#73-0912 | Honda GL500I (1981-1982)

Footrest Rubbers (Set/2) - OEM Ref # 50661-425-670

Honda GL500I Brake Cam Dust Seal
USD$ 3.00
Fits: GL500I (81-82)

Brake Cam Dust Seal

#73-0938 | Honda GL500I (1981-1982)

Brake Cam Dust Seal, Replaces OEM # 43134-300-000

Honda GL500I Side Cover Emblem Fixing Nut Pk/2
USD$ 4.00
Fits: GL500I (81-82)

Side Cover Emblem Fixing Nut Pk/2

#73-0944 | Honda GL500I (1981-1982)

Side Cover Emblem Fixing Nut (3mm) Pk/2, Used to Attach the Side Cover Emblems. Replaces OEM # 90313-567-000 Check your bike to see the quantity you require

Honda GL500I Brake Caliper Bleed Screw
USD$ 5.00
Fits: GL500I (81-82)

Brake Caliper Bleed Screw

#73-0994 | Honda GL500I (1981-1982)

Brake Caliper Bleed Screw. Replaces OEM # 43352-568-003 Please Note: This item has various Applications, it is used on either the front brake caliper, Rear brake caliper or clutch slave cylinder. Confirm it is used for the application you require before ordering. Sold Each, Order the Quantity you Require

Honda GL500I Handlebar Clutch Lever Pivot Bolt & Nut Set
USD$ 5.00
Fits: GL500I (81-82)

Handlebar Clutch Lever Pivot Bolt & Nut Set

#73-0998 | Honda GL500I (1981-1982)

Handlebar Clutch Lever Pivot Bolt & Nut Set. This is the Set that Fastens the Clutch Lever in Place. Includes One Bolt with One Nut. Replaces OEM # 90113-422-000 (Bolt) and OEM # 94002-06000-0S (Nut).

Honda GL500I Handlebar Brake Lever Pivot Bolt & Nut Set
USD$ 8.00
Fits: GL500I (81-82)

Handlebar Brake Lever Pivot Bolt & Nut Set

#73-1031 | Honda GL500I (1981-1982)

Handlebar Brake Lever Pivot Bolt & Nut Set. This is the Set that Fastens the Brake Lever in Place. Includes One Bolt with One Nut. Replaces OEM # 90114-MA5-671 (Bolt) and OEM # 94050-06000 (Nut)

Honda GL500I Carb Bolt Kit
USD$ 12.00
Fits: GL500I (81-82)

Carb Bolt Kit

#73-1049 | Honda GL500I (1981-1982)

Carburetor Bolt and Washer 24 Piece Kit. This is a Complete Bolt Kit for All 4 Carburetors.

Honda GL500I Custom Rear Brake Rod Assembly ~ Joker Machine
USD$ 115.00
Fits: GL500I (81-82)
Out of Stock

Custom Rear Brake Rod Assembly ~ Joker Machine

#73-1071 | Honda GL500I (1981-1982)

Joker Machine Brand ~ Custom Rear Brake Rod Assembly, Replaces OEM # 43450-405-000 This rod gives your bike a great look while improving the quality of your brake actuator rod! (In comparison to the easily bendable stock steel rod). Adjustability range and length dimensions are exactly the same as the OEM rod. Super easy brake adjustments due to the knurled outside knob and a hex nut feature all in one. High quality CNC machined part, made in the U.S.A.

Honda GL500I Custom Brake Rod Adjuster Knob ~ Joker Machine
USD$ 20.00
Fits: GL500I (81-82)

Custom Brake Rod Adjuster Knob ~ Joker Machine

#73-1072 | Honda GL500I (1981-1982)

Joker Machine Brand ~ Custom Brake Rod Adjuster Knob, Replaces OEM # 95015-42000 Gives your bike a great custom look while refining the quality of your brake adjuster knob! Makes for super easy brake adjustments due to the choice of a knurled outside knob and a hex nut feature all in one. High quality CNC machined part, made in the U.S.A.

Honda GL500I Valve Spring Retainer
USD$ 5.00
Fits: GL500I (81-82)

Valve Spring Retainer

#73-1125 | Honda GL500I (1981-1982)

Valve Spring Retainer, Replaces OEM # 14771-551-020 Sold Each, Order the Quantity you Require.

Honda GL500I Fuse Box Assembly *Damaged Tabs*
USD$ 30.00
Fits: GL500I (81-82)

Fuse Box Assembly *Damaged Tabs*

#73-1147 | Honda GL500I (1981-1982)

*Damaged Tabs* Fuse Box Assembly Complete with 10Amp Fuses, Replaces OEM# 38200-425-005. This Fuse Box Typically has 4 Sets of Attachment Tabs on the back of the assembly used to fasten to the bike. However, several had tabs broken during transit so our loss is your gain! This unit has absolutely nothing wrong with the electrics. The unit your purchasing has damage to some or all of the tabs used to fasten the unit to your bike. Due to where it is attached all tabs should not be needed for installation. You may or may not need to find a solution such as glue/tape etc. to install but it should not pose any problems. As there is a cover over this unit if you use a little duct tape etc. nobody will ever know.

▼ Show Universal Parts ▼
The names Honda, Yamaha, Kawasaki, Suzuki and any other trade names or symbols belonging to each respective corporation are stated for reference purposes only. The products on this site are after market (not OEM) replacement parts and accessories only. We have no relationship to the listed companies.