HondaNX250 ► 

Refine Search Results
Honda NX250 Brake Lever
USD$ 7.00
Fits: NX250 (88)

Brake Lever

#08-0151 | Honda NX250 (1988)

Brake Lever OEM Ref # 53175-KM9-006 / 53175-ML5-006 / 53175-MR1-671

Honda NX250 Clutch Lever
USD$ 7.00
Fits: NX250 (88)
Out of Stock

Clutch Lever

#08-0155 | Honda NX250 (1988)

Clutch Lever OEM Ref # 53178-KVO-000

Honda NX250 Turn Signal Lens
USD$ 3.00
Fits: NX250 (88)
Out of Stock

Turn Signal Lens

#11-2223 | Honda NX250 (1988)

Turn Signal Lens - Amber - Rear OEM Ref # 33402-MG2-003

Honda NX250 Turn Signal Lens
USD$ 3.00
Fits: NX250 (88)

Turn Signal Lens

#11-2223B | Honda NX250 (1988)

Turn Signal Lens - Amber - Front OEM Ref # 33402-MG2-003

Honda NX250 Front Stoplight Switch
USD$ 12.00
Fits: NX250 (89-90)

Front Stoplight Switch

#12-0014 | Honda NX250 (1989-1990)

Front Stoplight Switch OEM Ref # 35340-MM5-600

Honda NX250 Oil Drain Plug
USD$ 9.00
Fits: NX250 (88-89)

Oil Drain Plug

#15-0016 | Honda NX250 (1988-1989)

Magnetic Oil Drain Plug 12mm Diameter 1.50 Thread Pitch OEM Ref # 92800-12000 / 92066-1174 / 01107-12208

Honda NX250 Oil Filter
USD$ 6.00
Fits: NX250 (91-95)

Oil Filter

#15-0028 | Honda NX250 (1991-1995)

Oil Filter OEM Ref # 15412-KFO-010 / 15412-KFO-000 / 15410-KFO-305-315

Honda NX250 Exhaust Gasket Pk/10
USD$ 12.00
Fits: NX250 (88-89)

Exhaust Gasket Pk/10

#17-3812 | Honda NX250 (1988-1989)

Exhaust Gasket Pk/10 OEM Ref # 18291-254-000 / 18291-MM5-860

Honda NX250 Ignition Pulser/Trigger
USD$ 20.00
Fits: NX250 (88-90)

Ignition Pulser/Trigger

#17-6821 | Honda NX250 (1988-1990)

Ignition Pulser/Trigger OEM Ref # 30300-HA0-033

Honda NX250 Mounting Rubber
USD$ 2.00
Fits: NX250 (88-90)

Mounting Rubber

#17-6942 | Honda NX250 (1988-1990)

Mounting Rubber, Replaces OEM # 17245-107-010

Honda NX250 Float Bowl Gasket
USD$ 8.00
Fits: NX250 (88-90)

Float Bowl Gasket

#20-8030 | Honda NX250 (1988-1990)

Float Bowl Gasket (O-Ring)

Honda NX250 Radiator Fan Switch
USD$ 35.00
Fits: NX250 (88-90)

Radiator Fan Switch

#24-2050 | Honda NX250 (1988-1990)

Radiator Fan Switch, Replaces OEM # 37760-MR1-003 / 37760-MT2-003

Honda NX250 Fork Seals
USD$ 14.00
Fits: NX250 (88-90)

Fork Seals

#27-1028 | Honda NX250 (1988-1990)

Fork Seals Set/2 37 X 50 X 11

Honda NX250 Rear Brake Shoes
USD$ 15.00
Fits: NX250 (88-90)

Rear Brake Shoes

#29-3133 | Honda NX250 (1988-1990)

Rear Brake Shoes Pk/2 Diameter: 109.5mm Width: 30mm OEM Ref # 43120-428-013

Honda NX250 Front Brake Pads
USD$ 19.00
Fits: NX250 (88-90)

Front Brake Pads

#29-3505 | Honda NX250 (1988-1990)

Front Brake Pads Pk/2 OEM Ref # 45105-HA5-671A

Honda NX250 Front Sintered Brake Pads
USD$ 20.00
Fits: NX250 (88-90)

Front Sintered Brake Pads

#29-3702 | Honda NX250 (1988-1990)

Front Brake Pads Pk/2 Sintered Pads OEM Ref # 45105-HA5-671A

Honda NX250 Kick Starter Stopper Spring with Steel Ball
USD$ 3.50
Fits: NX250 (88-90)

Kick Starter Stopper Spring with Steel Ball

#29-7013 | Honda NX250 (1988-1990)

Kick Starter Stopper Spring with Steel Ball Set. Replaces OEM # 28333-300-000 (Spring) and OEM # 96211-08000 (Steel Ball).

Honda NX250 Lever Safety Stop Switch
USD$ 10.00
Fits: NX250 (88-90)

Lever Safety Stop Switch

#29-7029 | Honda NX250 (1988-1990)

Front Clutch Lever Safety Stop Switch, Replaces OEM # 35330-413-003 This is the switch that allows the bike to start when the clutch lever is depressed.

Honda NX250 Clutch Plate
USD$ 5.50
Fits: Listed Models

Clutch Plate

#39-1111E | Honda NX250 (1989), NX250 (1988)

Clutch Plate 6 Pieces Required OEM Ref # 22201-KAE-000 / 22201-KM4-000 / 22201-KA4-711 / 22201-KA4-712 / 22201-KZ3-730 / 22201-MAE-000 / 22201-MAL-600 / 22201-MR7-000 / 22201-MS6-620 / 22201-MV4-000

Honda NX250 Float Needle
USD$ 6.00
Fits: NX250 (88)

Float Needle

#48-5011 | Honda NX250 (1988)

Float Needle High Quality - Made In Japan OEM Ref # 16155-413-751 / 16155-397-971

Honda NX250 Handlebar Rubber Boot
USD$ 12.95
Fits: NX250 (88-90)

Handlebar Rubber Boot

#73-0095 | Honda NX250 (1988-1990)

Handlebar Rubber Boot. Replaces OEM # 53180-425-010

Honda NX250 Stock Type Gearshift Lever Rubber
USD$ 5.00
Fits: NX250 (88-90)

Stock Type Gearshift Lever Rubber

#73-0838 | Honda NX250 (1988-1990)

Stock Type Gearshift Lever Rubber, Replaces OEM # 24781-419-000

Honda NX250 Brake Rod Joint
USD$ 2.00
Fits: NX250 (88-90)

Brake Rod Joint

#73-0843 | Honda NX250 (1988-1990)

Brake Rod/Arm Joint, Replaces OEM # 95015-32001

Honda NX250 Water Temperature Sending Unit
USD$ 20.00
Fits: NX250 (88-90)

Water Temperature Sending Unit

#73-0861 | Honda NX250 (1988-1990)

Water Temperature Sending Unit, Replaces OEM # 37750-PC1-004

Honda NX250 Carb Float & Pin
USD$ 21.95
Fits: NX250 (88-90)

Carb Float & Pin

#73-0869 | Honda NX250 (1988-1990)

Carb Float & Pin, Replaces OEM # 16013-439-921 Sold Each, Order the Quantity you Require

Honda NX250 Brake Caliper Bleed Screw
USD$ 5.00
Fits: NX250 (88-90)

Brake Caliper Bleed Screw

#73-0994 | Honda NX250 (1988-1990)

Brake Caliper Bleed Screw. Replaces OEM # 43352-568-003 Please Note: This item has various Applications, it is used on either the front brake caliper, Rear brake caliper or clutch slave cylinder. Confirm it is used for the application you require before ordering. Sold Each, Order the Quantity you Require

Honda NX250 Handlebar Brake Lever Pivot Bolt & Nut Set
USD$ 8.00
Fits: NX250 (88-90)

Handlebar Brake Lever Pivot Bolt & Nut Set

#73-1031 | Honda NX250 (1988-1990)

Handlebar Brake Lever Pivot Bolt & Nut Set. This is the Set that Fastens the Brake Lever in Place. Includes One Bolt with One Nut. Replaces OEM # 90114-MA5-671 (Bolt) and OEM # 94050-06000 (Nut)

Honda NX250 Custom Brake Rod Adjuster Knob ~ Joker Machine
USD$ 20.00
Fits: NX250 (88-90)

Custom Brake Rod Adjuster Knob ~ Joker Machine

#73-1072 | Honda NX250 (1988-1990)

Joker Machine Brand ~ Custom Brake Rod Adjuster Knob, Replaces OEM # 95015-42000 Gives your bike a great custom look while refining the quality of your brake adjuster knob! Makes for super easy brake adjustments due to the choice of a knurled outside knob and a hex nut feature all in one. High quality CNC machined part, made in the U.S.A.

Honda NX250 Steering Stem Washer
USD$ 3.50
Fits: NX250 (88-90)

Steering Stem Washer

#73-1127 | Honda NX250 (1988-1990)

Steering Stem Washer, Replaces OEM # 90503-425-000 Sold Each, order the quantity you require.

▼ Show Universal Parts ▼
The names Honda, Yamaha, Kawasaki, Suzuki and any other trade names or symbols belonging to each respective corporation are stated for reference purposes only. The products on this site are after market (not OEM) replacement parts and accessories only. We have no relationship to the listed companies.