Honda ► SL350K ►
-
Here’s our hand-picked list of parts and accessories for your Honda SL350K with universal parts included that match “honda sl125”►
- Honda
![Honda SL350K Carb Float](/images/parts/100/20-6500.jpg)
Carb Float
Brass Carb Float with Pin - Replaces OEM# 16013-286-014 Fits VM29/33 Smoothbores & most OEM CV/VM Mikuni carbs Used on Yamaha & Kawasaki up to 1980 and some Honda's
![Honda SL350K Front Fork Top Bridge / Triple Tree Washer Kit](/images/parts/100/73-0833.jpg)
Front Fork Top Bridge / Triple Tree Washer Kit
Front Fork Top Bridge / Triple Tree Washer Kit of 2 Washers. These washers are needed in order to avoid broken top triple trees when you tighten up your fork tube clamps. Replace # OEM 53235-300-000
![Honda SL350K Sidecover Damper Rubber A](/images/parts/100/02-6532.jpg)
Sidecover Damper Rubber A
Rubber Sidecover Damper A, Replaces OEM # 17247-303-000
![Honda SL350K Clutch Lever ~ GP Style](/images/parts/100/08-0080.jpg)
Clutch Lever ~ GP Style
Clutch Lever - Custom GP Style in Silver, This Has More of a Bend/Kickback then the stock lever. Replaces OEM # 53178-369-700
![Honda SL350K Clutch Lever Perch](/images/parts/100/08-0432.jpg)
Clutch Lever Perch
Clutch Lever Perch, Replaces OEM# 53172-310-010 / 53172-110-000 / 53172-310-000 Includes a 10mm Mirror Mount, for 7/8" handlebars
![Honda SL350K Front Cable/ Stop Switch Clip](/images/parts/100/73-1116.jpg)
Front Cable/ Stop Switch Clip
Front Cable Clip, This Clip Holds the Stop Switch Wires to the Cable to Keep Things Tidy. Replaces OEM # 45465-270-000
![Honda SL350K Stock Type Reflector](/images/parts/100/11-2303.jpg)
Stock Type Reflector
Stock Type Screw on Reflector, 6mm thread. Replaces OEM # 33741-340-670
![Honda SL350K Brake Lever Perch](/images/parts/100/08-0422.jpg)
Brake Lever Perch
Brake Lever Perch, Replaces OEM# 53171-312-003 Includes a RH Thread 10mm Mirror Mount. Fits to 7/8" handlebars and includes a hole for the brake light switch.
![Honda SL350K Seat Rubber "B"](/images/parts/100/02-6533.jpg)
Seat Rubber "B"
Seat Setting Rubber "B". This is one of the Rubber Settings Under the Seat. Replace those old worn Rubbers with a brand new one! Replaces OEM # 77205-286-000 Order the Quantity of Seat Rubber "B" your Bike Requires
![Honda SL350K Side Stand Pivot Bolt & Nut Set](/images/parts/100/73-0893.jpg)
Side Stand Pivot Bolt & Nut Set
Side Stand Pivot Bolt & Nut Set, This is the Set Used to Fasten the Side Stand in Place. Replaces OEM # 90108-283-000 (Bolt) and 94002-10000-0S (Nut).
![Honda SL350K Clutch Center Nut Removal Tool ~ Premium](/images/parts/100/35-0076.jpg)
Clutch Center Nut Removal Tool ~ Premium
Premium Clutch Center Nut Removal Tool, The perfect tool for easier removal/fitting, without damaging the special locking nut. Both ends with 1/2 drive extension bar, Diameter 20 x 24.
![Honda SL350K Grease Fitting Nipple (Pk/2)](/images/parts/100/73-0941.jpg)
Grease Fitting Nipple (Pk/2)
Grease Fitting Nipple A .45 (Pk/2). Replaces OEM # 96201-30001
![Honda SL350K Tachometer Cable](/images/parts/100/51-2406.jpg)
Tachometer Cable
Tachometer Cable - Black - OEM Ref # 37260-KB7-010 / 37260-438-000 Made in Japan Length is 24" - Confirm this is the length you require before purchasing
![Honda SL350K Shock Absorber Joint Rubber Set/2](/images/parts/100/73-0093.jpg)
Shock Absorber Joint Rubber Set/2
Shock Absorber Joint Rubber Set/2. Replaces OEM # 52484-292-000
![Honda SL350K Handlebar Clamp Set /2](/images/parts/100/73-1120.jpg)
Handlebar Clamp Set /2
Black Handlebar Clamp Set/2. These clamp the stock 7/8" handlebars to the upper triple clamp. Replaces OEM # 95014-22200
![Honda SL350K Black Steering Stem Nut ~ Joker Machine](/images/parts/100/12-0073.jpg)
Black Steering Stem Nut ~ Joker Machine
Joker Machine Brand ~ Black Steering Stem Nut, Hex Nut Size 30mm. Replaces OEM # 90304-415-000 High quality CNC machined part made in the U.S.A.
![Honda SL350K Clutch Center Nut Removal Tool](/images/parts/100/35-0051.jpg)
Clutch Center Nut Removal Tool
Clutch Center Nut Removal Tool, The perfect tool for easier removal/fitting, without damaging the special locking nut. Inside diameter 24mm, use with 3/8" driver.
![Honda SL350K Rear Wheel Bearing Retainer](/images/parts/100/73-1068.jpg)
Rear Wheel Bearing Retainer
Rear Wheel Bearing Retainer - Brake Disc Side - Replaces OEM# 41231-286-000
![Honda SL350K Drive Chain Adjuster](/images/parts/100/99-4856.jpg)
Drive Chain Adjuster
Drive Chain Adjuster with Nut and Bolt, Replaces OEM# 40543-471-000 / 40543-312-010. If you require 2 adjusters purchase 2 of this part.
![Honda SL350K Seat Lock with Keys](/images/parts/100/73-0140.jpg)
Seat Lock with Keys
Seat Lock with Keys, Replaces OEM # 77230-399-007 / 77230-107-711 This seat lock works perfect for the bikes listed but the locking mechanism sticks out a bit farther then the OEM type. If you have lost your old key you have to remove the seat lock bracket and assembly. This can be done with a short 10mm wrench or socket, once that's done the rest is easy.
![Honda SL350K Handlebar Clutch Lever Pivot Bolt & Nut Set](/images/parts/100/73-0996.jpg)
Handlebar Clutch Lever Pivot Bolt & Nut Set
Handlebar Clutch Lever Pivot Bolt & Nut Set. This is the Set that Fastens the Clutch Lever in Place. Includes One Bolt with One Nut. Replaces OEM # 90114-310-000 (Bolt) and OEM # 94001-06200-0S (Nut).
![Honda SL350K Seat Lock Bar Assembly](/images/parts/100/73-1070.jpg)
Seat Lock Bar Assembly
Seat Lock Bar Assembly, Replaces OEM# 77220-340-003 / 77220-340-011
![Honda SL350K Clutch Tab Washer](/images/parts/100/73-0839.jpg)
Clutch Tab Washer
Clutch Tab Washer, 16mm Size, Replaces OEM # 90431-292-000
![Honda SL350K Seat Hinge Pin](/images/parts/100/73-0947.jpg)
Seat Hinge Pin
Seat Hinge Pin, Replaces OEM # 77103-313-000 Note: 2 Used Per Bike, Order the Quantity you Require
![Honda SL350K Tappet Covers](/images/parts/100/01-9980.jpg)
Tappet Covers
Finned Tappet Cover - Sold Each Comes With O-Ring gasket High Quality Chrome Finish
![Honda SL350K Special Oil Filter Rotor Washer](/images/parts/100/29-7034A.jpg)
Special Oil Filter Rotor Washer
Special Angled Oil Filter Rotor Washer (16mm), Replaces OEM# 90481-292-000
![Honda SL350K Fuel Petcock](/images/parts/100/29-0542.jpg)
Fuel Petcock
Fuel Petcock - Replaces OEM # 16950-292-000 - Fits M16 x 1.5 Note: Please Check that the Size Listed Above is Correct for your Bike before ordering
![Honda SL350K Steel Clutch Plate](/images/parts/100/39-1140.jpg)
Steel Clutch Plate
Steel Clutch Plate B OEM Ref # 22321-KA4-700 Order the Quantity you require
![Honda SL350K Carburetor Screw Kit](/images/parts/100/48-0795.jpg)
Carburetor Screw Kit
Carburetor Screw Kit (Enough For 2 Carbs) Get a new set of screws to clean up the look of your carbs! Kit Includes: 2X - Drain Screws with O-Rings 8X - 4x10 Screws w Lock Washers 8X - 4x8 Screws w Lock Washer 2X - 5x12 Screws w Lock Washers
![Honda SL350K Joker Machine Magnetic Oil Drain Plug](/images/parts/100/12-0108.jpg)
Joker Machine Magnetic Oil Drain Plug
Joker Machine Magnetic Oil Drain Plug with O-Ring, Replaces OEM# 90013-312-000. High quality made from 6061 billet aluminum. High power rare earth neodymium-iron boron magnet pressed into the body that exceptionally grabs steel debris from your tank and motor. M33.7 - 1.5mm thread pitch. Installs with a 19mm socket. - 45mm outside diameter and 19mm off the case.
![Honda SL350K Custom Drive Chain Adjuster Screws ~ Black ~ Joker Machine](/images/parts/100/73-1059.jpg)
Custom Drive Chain Adjuster Screws ~ Black ~ Joker Machine
Joker Machine Brand ~ Black Custom Type Drive Chain Adjuster Screws (Set of 2) with Gold Cadium Plated Nuts. Replace OEM # 90119-283-000 Features a CNC Machined Knob Section with 3 methods of Adjusting (By Hand with the Knurled Section, With an Open or Box Wrench on the Hex or with an Allen Wrench through the End of the Knob to the Screw). These Adjuster Screws Look Very Sharp and Improve the Look of your Bike. High Quality Made in the U.S.A.
![Honda SL350K Fork Internal Circlip Set](/images/parts/100/73-1035.jpg)
Fork Internal Circlip Set
Fork Internal Circlip (48mm) Set/2, Replaces OEM # 94521-48000
![Honda SL350K Contact Point ~ Left Side](/images/parts/100/14-0006.jpg)
Contact Point ~ Left Side
Contact Point ~ Left Side - Replaces OEM# 30204-286-004 / 30202-369-154
![Honda SL350K Clutch Ball Retainer](/images/parts/100/99-4850.jpg)
Clutch Ball Retainer
Clutch Ball Retainer, Replaces OEM# 22860-286-000
![Honda SL350K Custom Brake Rod Adjuster Knob ~ Joker Machine](/images/parts/100/73-1072.jpg)
Custom Brake Rod Adjuster Knob ~ Joker Machine
Joker Machine Brand ~ Custom Brake Rod Adjuster Knob, Replaces OEM # 95015-42000 Gives your bike a great custom look while refining the quality of your brake adjuster knob! Makes for super easy brake adjustments due to the choice of a knurled outside knob and a hex nut feature all in one. High quality CNC machined part, made in the U.S.A.
![Honda SL350K Contact Point ~ Right Side](/images/parts/100/14-0005.jpg)
Contact Point ~ Right Side
Contact Point ~ Right Side - Replaces OEM# 30203-286-004 / 30203-369-154
![Honda SL350K Gas/Fuel Tank Cap Latch Assembly](/images/parts/100/20-0083.jpg)
Gas/Fuel Tank Cap Latch Assembly
Gas/Fuel Tank Cap Latch Assembly, Includes Chrome Latch, Return Spring, Latch Mounting Pin and C-Clip.
![Honda SL350K Steel Clutch Plate "A"](/images/parts/100/39-1410.jpg)
Steel Clutch Plate "A"
Steel Clutch Plate "A", Replaces OEM# 22311-286-000. 1 Plate Used Per Bike
![Honda SL350K Cam Chain](/images/parts/100/52-3027.jpg)
Cam Chain
Cam Chain 219T x 94 D.I.D (Daido) Takes 01-8803 Rivet Link Pitch: .3061" Side Plate: Peanut Average Tensile Strength: 1800lbs OEM Ref # 14401-286-003 / 14401-410-003
![Honda SL350K Rear Shock Swingarm Bushing](/images/parts/100/28-6918.jpg)
Rear Shock Swingarm Bushing
Rear Shock Swingarm Bushing, Replaces OEM# 40548-268-000 19mm Long, 22mm OD, 10mm ID. Sold Each, Order the Quantity you Require
![Honda SL350K Gas/Fuel Tank Cap Latch Assembly ~ Black](/images/parts/100/01-9934.jpg)
Gas/Fuel Tank Cap Latch Assembly ~ Black
Gas/Fuel Tank Cap Latch Assembly, Includes Black Latch with Return Spring, Latch Mounting Pin and C-Clip.
![Honda SL350K Custom Black Gas/Fuel Tank Cap Latch Assembly ~ Joker Machine](/images/parts/100/73-1157.jpg)
Custom Black Gas/Fuel Tank Cap Latch Assembly ~ Joker Machine
Joker Machine Brand ~ Custom Black Gas/Fuel Tank Cap Latch Assembly, Includes Black Latch, Return Spring and Alloy Screw attachment with nut. A fully CNC machined, billet aluminum alternative to the discontinued cast thumb latches. Install is easily made with the provided alloy screw attachment with nut. Much more durable and stronger than the original die-cast piece. High quality CNC machined part made in the U.S.A. Ties in great with our Custom Black Gas/Fuel Tank Cap (#73-1156)
![Honda SL350K Fork Dust Seals](/images/parts/100/27-1049.jpg)
Fork Dust Seals
Fork Dust Seals Set/2 35 X 53 OEM Ref # 91254-434-003 / 91254-435-003 / 51425-340-000
![Honda SL350K Speedo Gear Plug](/images/parts/100/29-0538.jpg)
Speedo Gear Plug
Speedo Gear Plug - Plug 15mm Outer Diameter, 22mm Long. This Plug is Great for Keeping your Original Speedo Drive Gear Clean.
![Honda SL350K Rear Fuel Tank Holder Rubber](/images/parts/100/12-0133.jpg)
Rear Fuel Tank Holder Rubber
Rear Fuel Tank Holder Rubber, Replaces OEM# 17613-286-000
![Honda SL350K Kick Starter Stopper Spring with Steel Ball](/images/parts/100/29-7013.jpg)
Kick Starter Stopper Spring with Steel Ball
Kick Starter Stopper Spring with Steel Ball Set. Replaces OEM # 28333-300-000 (Spring) and OEM # 96211-08000 (Steel Ball).