Honda ► XL250 ►
-
Here’s our hand-picked list of parts and accessories for your Honda XL250 with universal parts included►
- Honda
![Honda XL250 Side Stand Rubber](/images/parts/100/02-6537.jpg)
Side Stand Rubber
Side Stand Rubber Cushion. Replaces OEM # 50548-356-700
![Honda XL250 Brake Lever](/images/parts/100/08-0066.jpg)
Brake Lever
Brake Lever OEM Ref # 53175-402-700 / 53170-216-670 / 53175-286-000 / 53170-286-670 / 53170-329-010 / 53170-369-700 / 53175-369-700
![Honda XL250 Brake Lever Perch](/images/parts/100/08-0422.jpg)
Brake Lever Perch
Brake Lever Perch, Replaces OEM# 53171-312-003 Includes a RH Thread 10mm Mirror Mount. Fits to 7/8" handlebars and includes a hole for the brake light switch.
![Honda XL250 Clutch Lever Perch](/images/parts/100/08-0432.jpg)
Clutch Lever Perch
Clutch Lever Perch, Replaces OEM# 53172-310-010 / 53172-110-000 / 53172-310-000 Includes a 10mm Mirror Mount, for 7/8" handlebars
![Honda XL250 Tail Light Assembly](/images/parts/100/10-0028.jpg)
Tail Light Assembly
Tail Light Assembly, Replaces OEM# 33701-329-671 2 Wires
![Honda XL250 Ignition Coil with Condenser](/images/parts/100/12-0103.jpg)
Ignition Coil with Condenser
Ignition Coil with Condenser, Replaces OEM# 30500-950-405 6 Volt, 5.4k Ohm.
![Honda XL250 Turn Signal Flasher Relay](/images/parts/100/12-0104.jpg)
Turn Signal Flasher Relay
Turn Signal Flasher Relay, Replaces OEM# 38310-428-671 / 38300-GFO-405 / 38300-243-670 / 38300-089-671 / 38300-428-004 / 38301-428-671 / 38301-428-004. 6 Volt - 17W - 2 Prong Style Does Not work with LED signals
![Honda XL250 Handlebar Rubber Cover Set/2](/images/parts/100/12-0127.jpg)
Handlebar Rubber Cover Set/2
Handlebar Rubber Cover Set/2 - Replaces OEM# 53176-329-000 (Right Side), 53179-329-000 (Left Side) One rubber for the left and one for the right side per set.
![Honda XL250 Replacement Mirror](/images/parts/100/16-3020.jpg)
Replacement Mirror
Replacement Mirror (R.H) 4 1/2" Diameter, 10mm Thread. Replaces OEM# 88110-333-611
![Honda XL250 Replacement Mirror](/images/parts/100/16-3021.jpg)
Replacement Mirror
Replacement Mirror (L.H) 4 1/2" Diameter, 10mm Thread. Replaces OEM# 88120-333-611
![Honda XL250 Top End Engine Gasket Set](/images/parts/100/18-0084.jpg)
Top End Engine Gasket Set
Top End Engine Gasket Set Includes Contents Shown in Photo Honda used different head gaskets on these bikes. 12191-329-010 used up to Engine SN 1062714 and 12909-283-000 used up to Engine SN 2009778. The gasket in this kit is the later style, not the type used in some of the early K0 models from 1972.
![Honda XL250 Complete Engine Gasket Set](/images/parts/100/18-0092.jpg)
Complete Engine Gasket Set
Complete Engine Gasket Set Includes Contents Shown in Photo Honda used different head gaskets on these bikes. 12191-329-010 used up to Engine SN 1062714 and 12909-283-000 used up to Engine SN 2009778. The gasket in this kit is the later style, not the type used in some of the early K0 models from 1972.
![Honda XL250 Gear Change Lever](/images/parts/100/19-0072.jpg)
Gear Change Lever
Gear Change Lever Universal Fit Spline Diameter 11.5mm Total Length 6 1/2" Offset 4"
![Honda XL250 Carb Float](/images/parts/100/20-6511.jpg)
Carb Float
Carb Float with Pin, Replaces OEM # 16013-329-004 Note: 4 Carb Floats Used Per Bike, Order Quantity you Require
![Honda XL250 Rectifier](/images/parts/100/24-1999.jpg)
Rectifier
Rectifier, Replaces OEM# 31700-385-000 / 31700-356-000 / 31700-329-013
![Honda XL250 Fork Dust Seals](/images/parts/100/27-1049.jpg)
Fork Dust Seals
Fork Dust Seals Set/2 35 X 53 OEM Ref # 91254-434-003 / 91254-435-003 / 51425-340-000
![Honda XL250 High Performance Kibblewhite Bronze Swingarm Bushing Set](/images/parts/100/28-1038.jpg)
High Performance Kibblewhite Bronze Swingarm Bushing Set
High Performance Kibblewhite Bronze Swingarm Bushing Set/2. Replaces OEM# 52108-457-300, 52108-422-300. Made in the USA by Kibblewhite who have been making High Quality Performance parts for 75+ years. Kibblewhite bronze bushings offers increased durability and better fitment then the OEM type bushings.
![Honda XL250 Engine Cover Bolt Set](/images/parts/100/28-6974.jpg)
Engine Cover Bolt Set
High Quality Premium Stainless Steel Engine Cover Bolt Set Set includes: 50 Bolts and 3 Allen keys for a total of 53 pieces. These bolts are all smooth head Allen bolts and are for the visible covers only.
![Honda XL250 Cotter Valve / Valve Keeper](/images/parts/100/29-0083.jpg)
Cotter Valve / Valve Keeper
Cotter Valve / Valve Keeper, Replaces OEM# 14781-107-003 / 14781-107-020. 2 Used For Each Valve Spring. Sold Each, Order the Quantity you Require
![Honda XL250 Fuel Petcock](/images/parts/100/29-0541.jpg)
Fuel Petcock
Fuel Petcock, Replaces OEM# 16950-107-000 / 16950-107-005 / 16950-356-005 / 16950-070-700 / 16950-356-700. Single Fuel Output type - Fuel Hose Exits to the Side. Please check the photo, this petcock may not be identical to the OEM type but will work for these models. This petcock has a longer body and the fuel output spigot is located differently then stock for some models.
![Honda XL250 Rear Brake Shoes](/images/parts/100/29-3125B.jpg)
Rear Brake Shoes
Rear Brake Shoes Pk/2 Diameter: 138.3mm Width: 25mm OEM Ref # 43120-329-671
![Honda XL250 Flange Knock Bolt (Set/2)](/images/parts/100/29-7019.jpg)
Flange Knock Bolt (Set/2)
Flange Knock Bolt (Set/2). These Bolts Fasten to the Cam Sprocket. Replaces OEM # 90082-HA0-000
![Honda XL250 Steel Clutch Plate](/images/parts/100/39-1407C.jpg)
Steel Clutch Plate
Steel Clutch Plate 6 Pieces Required
![Honda XL250 Clutch Spring Kit](/images/parts/100/39-1502.jpg)
Clutch Spring Kit
Clutch Spring Kit. Note: There will be extra springs in this kit for some bikes.
![Honda XL250 Lens Screw](/images/parts/100/49-0145.jpg)
Lens Screw
Tail Light Lens Screws, Pack of 10 Screws. Replaces OEM # 93500-04055-4J ISO Std. Pitch - Steel Plated Size: 4 x 55mm
![Honda XL250 Fuel Petcock Gasket](/images/parts/100/49-0259.jpg)
Fuel Petcock Gasket
Fuel Petcock Gasket, Replaces OEM# 16957-ZE1-812 / 16955-028-004 / 16955-011-010
![Honda XL250 Front Sprocket Lock Plate Set](/images/parts/100/49-0782.jpg)
Front Sprocket Lock Plate Set
Front Sprocket Lock Plate with 2 Lock Plate Bolts. It's Always good to replace these when installing a new front sprocket. Replaces OEM # 23811-292-000 (Plate) and OEM # 92101-06016-0A (Bolts) X2.
![Honda XL250 Clutch Cover Screw Set](/images/parts/100/49-0783.jpg)
Clutch Cover Screw Set
Clutch Cover Screw Set. Includes all 3 Screws needed to fasten the Clutch Cover. Replaces OEM # 93700-06016-0B X3.
![Honda XL250 Fork Cap O-Ring Set/2](/images/parts/100/49-0790.jpg)
Fork Cap O-Ring Set/2
Fork Cap O-Ring Set of 2. 23mm x 2.8mm size. Replaces OEM # 94608-50000 X2.
![Honda XL250 Speedometer Cable](/images/parts/100/51-2305.jpg)
Speedometer Cable
Speedometer Cable - Black - OEM Ref. # 44830-356-000 / 44830-426-830 / 44830-371-010 Length 40.75" Made in Japan
![Honda XL250 Cam Chain](/images/parts/100/52-3027.jpg)
Cam Chain
Cam Chain 219T x 94 D.I.D (Daido) Takes 01-8803 Rivet Link Pitch: .3061" Side Plate: Peanut Average Tensile Strength: 1800lbs OEM Ref # 14401-286-003 / 14401-410-003
![Honda XL250 Helmet Holder Lock w Keys](/images/parts/100/73-0141.jpg)
Helmet Holder Lock w Keys
Helmet Holder Lock with Keys, Replaces OEM # 50710-086-007
![Honda XL250 Passenger Rear Footrest Rubber Set](/images/parts/100/73-0184.jpg)
Passenger Rear Footrest Rubber Set
Passenger Rear Footrest Rubber Set/2, Replaces OEM # 50716-371-660
![Honda XL250 Gas Tank & Side Panel Decal Set](/images/parts/100/73-0403.jpg)
Gas Tank & Side Panel Decal Set
Honda XL250 (1976) USA Model Gas Tank & Side Panel Decal (Sticker) Set - 4pc Set. These reproduction decals will add the finishing touch to your restoration. These decals are no longer available from the manufacturer. All decals are "printed" on the highest quality materials from companies such as 3M and Avery. All decals have a protective coating to resist scratching and to protect colors from UV rays. These decals are adhesive backed for simple application.
![Honda XL250 Gas Tank Decal Set](/images/parts/100/73-0404.jpg)
Gas Tank Decal Set
Honda XL250 (1976) USA Model Gas Tank Decal (Sticker) Set - 2pc Set. These reproduction decals will add the finishing touch to your restoration. These decals are no longer available from the manufacturer. All decals are "printed" on the highest quality materials from companies such as 3M and Avery. All decals have a protective coating to resist scratching and to protect colors from UV rays. These decals are adhesive backed for simple application.
![Honda XL250 Side Panel Decal Set](/images/parts/100/73-0641.jpg)
Side Panel Decal Set
Honda XL250 (1976) USA Model Side Panel Decal (Sticker) Set - 2pcs. These reproduction decals will add the finishing touch to your restoration. These decals are no longer available from the manufacturer. All decals are "printed" on the highest quality materials from companies such as 3M and Avery. All decals have a protective coating to resist scratching and to protect colors from UV rays. These decals are adhesive backed for simple application.
![Honda XL250 Clutch Tab Washer](/images/parts/100/73-0839.jpg)
Clutch Tab Washer
Clutch Tab Washer, 16mm Size, Replaces OEM # 90431-292-000
![Honda XL250 Fork Seal Stopper Metal Ring Pk/2](/images/parts/100/73-0940.jpg)
Fork Seal Stopper Metal Ring Pk/2
Fork Seal Stopper Metal Ring Pk/2, Replaces OEM # 51447-KL4-951 This is the Metal Ring above the Fork Seal.
![Honda XL250 Kick Starter Ratchet Spring](/images/parts/100/73-0942.jpg)
Kick Starter Ratchet Spring
Kick Starter Ratchet Spring. This Ratchet Spring Attaches by the Kick Starter Gear. Replaces OEM # 28253-300-000
![Honda XL250 Battery Box Rubber "B"](/images/parts/100/73-1040.jpg)
Battery Box Rubber "B"
Battery Box Rubber "B", Replaces OEM # 50327-300-000 Sold Each, Order the Quantity you Require
![Honda XL250 Front Signal Lamp Stay](/images/parts/100/73-1106.jpg)
Front Signal Lamp Stay
Front Signal Lamp Stay - Chrome. Body Length 40mm, Thread 30mm, Total Length 70mm. Note: We sell these in Various Lengths, Confirm this is the Size you would Like Before Purchase
![Honda XL250 Handlebar Clamp Set /2](/images/parts/100/73-1120.jpg)
Handlebar Clamp Set /2
Black Handlebar Clamp Set/2. These clamp the stock 7/8" handlebars to the upper triple clamp. Replaces OEM # 95014-22200
![Honda XL250 Piston Pin Clips (Pk/2)](/images/parts/100/73-1169.jpg)
Piston Pin Clips (Pk/2)
Piston Pin Clips, 19mm (Pk/2) - Replaces OEM # 94601-19000
![Honda XL250 Piston Pin](/images/parts/100/73-1170.jpg)
Piston Pin
Piston Pin - Replaces OEM # 13111-428-000 / 13111-471-000
![Honda XL250 Cylinder Head Gasket](/images/parts/100/73-1173.jpg)
Cylinder Head Gasket
Cylinder Head Gasket, Replaces OEM# 12251-329-306 / 12251-329-307 / 12251-329-010 / 12251-329-770
![Honda XL250 Points Cover Gasket](/images/parts/100/73-1174.jpg)
Points Cover Gasket
Points Cover Gasket, Replaces OEM# 30372-329-306 / 30372-329-000