HondaXL250 ► 

Refine Search Results
Honda XL250 Top End Engine Gasket Set
USD$ 21.95
Listed Models

Top End Engine Gasket Set

#18-0084 | Honda XL250 (1972-1976)

Top End Engine Gasket Set Includes Contents Shown in Photo Honda used different head gaskets on these bikes. 12191-329-010 used up to Engine SN 1062714 and 12909-283-000 used up to Engine SN 2009778. The gasket in this kit is the later style, not the type used in some of the early K0 models from 1972.

USD$ 21.95
Listed Models
Honda XL250 Complete Engine Gasket Set
USD$ 32.95
Listed Models

Complete Engine Gasket Set

#18-0092 | Honda XL250 (1972-1976)

Complete Engine Gasket Set Includes Contents Shown in Photo Honda used different head gaskets on these bikes. 12191-329-010 used up to Engine SN 1062714 and 12909-283-000 used up to Engine SN 2009778. The gasket in this kit is the later style, not the type used in some of the early K0 models from 1972.

USD$ 32.95
Listed Models
Honda XL250 Engine Gasket Set
USD$ 92.45
Listed Models

Engine Gasket Set

#18-0185 | Honda XL250 (1985-1999)

Complete Engine Gasket Set Includes all Engine Gaskets High Quality - Made In Italy by Athena Athena Product # P400210850221

USD$ 92.45
Listed Models
Honda XL250 Gear Change Lever
USD$ 11.80
Listed Models

Gear Change Lever

#19-0072 | Honda XL250 (1972-1977)

Gear Change Lever Universal Fit Spline Diameter 11.5mm Total Length 6 1/2" Offset 4"

USD$ 11.80
Listed Models
Honda XL250 Cotter Valve / Valve Keeper
USD$ 1.65
Listed Models

Cotter Valve / Valve Keeper

#29-0083 | Honda XL250 (1972), XL250 (1974-1976)

Cotter Valve / Valve Keeper, Replaces OEM# 14781-107-003 / 14781-107-020. 2 Used For Each Valve Spring. Sold Each, Order the Quantity you Require

USD$ 1.65
Listed Models
Honda XL250 Kick Starter Stopper Spring with Steel Ball
USD$ 2.20
Listed Models

Kick Starter Stopper Spring with Steel Ball

#29-7013 | Honda XL250 (1972)

Kick Starter Stopper Spring with Steel Ball Set. Replaces OEM # 28333-300-000 (Spring) and OEM # 96211-08000 (Steel Ball).

USD$ 2.20
Listed Models
Honda XL250 Flange Knock Bolt (Set/2)
USD$ 2.20
Listed Models

Flange Knock Bolt (Set/2)

#29-7019 | Honda XL250 (1972), XL250 (1976)

Flange Knock Bolt (Set/2). These Bolts Fasten to the Cam Sprocket. Replaces OEM # 90082-HA0-000

USD$ 2.20
Listed Models
Honda XL250 Clutch Center Nut Removal Tool
USD$ 8.85
Listed Models

Clutch Center Nut Removal Tool

#35-0051 | Honda XL250 (1972)

Clutch Center Nut Removal Tool, The perfect tool for easier removal/fitting, without damaging the special locking nut. Inside diameter 24mm, use with 3/8" driver.

USD$ 8.85
Listed Models
Honda XL250 Clutch Center Nut Removal Tool ~ Premium
USD$ 12.55
Listed Models

Clutch Center Nut Removal Tool ~ Premium

#35-0076 | Honda XL250 (1972)

Premium Clutch Center Nut Removal Tool, The perfect tool for easier removal/fitting, without damaging the special locking nut. Both ends with 1/2 drive extension bar, Diameter 20 x 24.

USD$ 12.55
Listed Models
Honda XL250 Clutch Cover Screw Set
USD$ 2.20
Listed Models

Clutch Cover Screw Set

#49-0783 | Honda XL250 (1972), XL250 (1976)

Clutch Cover Screw Set. Includes all 3 Screws needed to fasten the Clutch Cover. Replaces OEM # 93700-06016-0B X3.

USD$ 2.20
Listed Models
Honda XL250 Valve Stem Seal
USD$ 2.80
Listed Models

Valve Stem Seal

#73-0871 | Honda XL250 (1972)

Valve Stem Seal. Replaces OEM # 12209-333-005 / 12209-333-005 Sold Each - Order the Quantity you Require

USD$ 2.80
Listed Models
Honda XL250 Kick Starter Ratchet Spring
USD$ 2.20
Listed Models

Kick Starter Ratchet Spring

#73-0942 | Honda XL250 (1972), XL250 (1976)

Kick Starter Ratchet Spring. This Ratchet Spring Attaches by the Kick Starter Gear. Replaces OEM # 28253-300-000

USD$ 2.20
Listed Models
Honda XL250 Rear Wheel Bearing Retainer
USD$ 21.95
Listed Models

Rear Wheel Bearing Retainer

#73-1068 | Honda XL250 (1972)

Rear Wheel Bearing Retainer - Brake Disc Side - Replaces OEM# 41231-286-000

USD$ 21.95
Listed Models
Honda XL250 Seat Lock Bar Assembly
USD$ 39.95
Listed Models
Out of Stock
Email Me When Available

Seat Lock Bar Assembly

#73-1070 | Honda XL250 (1972), XL250 (1974-1975)

Seat Lock Bar Assembly, Replaces OEM# 77220-340-003 / 77220-340-011

USD$ 39.95
Listed Models
Out of Stock
Email Me When Available
Honda XL250 Valve Spring Retainer
USD$ 4.40
Listed Models

Valve Spring Retainer

#73-1124 | Honda XL250 (1972)

Valve Spring Retainer, Replaces OEM # 14771-329-000 Sold Each, Order the Quantity you Require.

USD$ 4.40
Listed Models
Honda XL250 Piston Pin Clips (Pk/2)
USD$ 0.95
Listed Models

Piston Pin Clips (Pk/2)

#73-1169 | Honda XL250 (1972-1976)

Piston Pin Clips, 19mm (Pk/2) - Replaces OEM # 94601-19000

USD$ 0.95
Listed Models
Honda XL250 Piston Pin
USD$ 5.95
Listed Models

Piston Pin

#73-1170 | Honda XL250 (1972-1976)

Piston Pin - Replaces OEM # 13111-428-000 / 13111-471-000

USD$ 5.95
Listed Models
Honda XL250 Rivet Link
USD$ 2.20

Rivet Link

#01-8801

Cam Chain Rivet Link Stepped Parallel Plate Fits BF05T Cam Chains

USD$ 2.20
Honda XL250 Rivet Link
USD$ 3.35

Rivet Link

#01-8802

Cam Chain Rivet Link Stepped Parallel Plate Fits 219FTSS Cam Chains

USD$ 3.35
Honda XL250 Rivet Link
USD$ 2.90

Rivet Link

#01-8803

Cam Chain Rivet Link Stepped Peanut Plate Fits 219T Cam Chains

USD$ 2.90
Honda XL250 Clip Link
USD$ 2.20

Clip Link

#01-8813

Cam Chain Clip Link Peanut Shape Fits 25H Cam Chains

USD$ 2.20
Honda XL250 Cam Chain Rivet Link
USD$ 2.90

Cam Chain Rivet Link

#01-8814

Cam Chain Rivet Link Peanut Shape Fits BS05MH TSUBAKI

USD$ 2.90
Honda XL250 Cam Chain Rivet Link
USD$ 2.20

Cam Chain Rivet Link

#01-8815

Cam Chain Rivet Link Peanut Shape Fits BF05M TSUBAKI

USD$ 2.20
Honda XL250 Cam Chain Rivet Link
USD$ 2.90

Cam Chain Rivet Link

#01-8816

Cam Chain Rivet Link Fits 82RH2015

USD$ 2.90
Honda XL250 Athesil - RTV Silicone Sealant
USD$ 12.55

Athesil - RTV Silicone Sealant

#05-0000

Athesil, the brand new RTV (Room-Temperature-Vulcanizing Silicone) is the sealant developed by Athena, the world's leading brand of Aftermarket gaskets and sealing products, meets the specific needs of professional technicians and mechanics in the automotive, nautical, motorcycle, industrial and off-road markets. Born to be the premium choice for every professional in the world of engines, it is extremely versatile, and it is the ultimate solution for maintenance and repair. Athesil joins, seals, repairs, corrects, fixes, and can be used as FIPG ("formed-in-place" gasket) for sealing and adhesion of glass, plastic or metal components, crankcases, pumps and flanges. After polymerization, Athesil forms a resistant, flexible and waterproof silicone rubber seal that perfectly resists aging, atmospheric agents and thermal cycles while remaining permanently elastic. Fluid resistant and thermally stable, Athesil does not damage lambda sensors, is easy to apply, and it is non-toxic nor flammable.

USD$ 12.55
Honda XL250 Three Bond Spoke Set Adhesive
USD$ 11.80
Out of Stock
Email Me When Available

Three Bond Spoke Set Adhesive

#05-0003

Three Bond Spoke Set Adhesive - 0.34 Oz, 10ml. Sets spoke nipples snug while protecting threads from rust and corrosion. Helps wheels stay true longer. Drip control nozzle for easier applications.

USD$ 11.80
Out of Stock
Email Me When Available
Honda XL250 Three Bond Super Glue
SALE: USD$ 5.95
(USD$ 7.35)

Three Bond Super Glue

#05-0004

Three Bond Super Glue (Gel Type) General Purpose Adhesive - 0.07 Oz, 2ml. Three Bond Super Glue attains practical-use strength in seconds. Contains no evaporative elements, so there's never any shrinkage to weaken bonding points. Excellent for nonporous materials. Made in the U.S.A.

SALE: USD$ 5.95
(USD$ 7.35)
Honda XL250 Three Bond Thread Lock
USD$ 11.80
Out of Stock
Email Me When Available

Three Bond Thread Lock

#05-0005

Three Bond Thread Lock - 0.34 Oz, 10ml. Low Strength, Removeable, Frequent Repair Type. Perfect for adding an extra hold to small screws and bolts which are frequently removed. Adds an extra hold of 10-20% greater then that of basic tightening. Blue in color.

USD$ 11.80
Out of Stock
Email Me When Available
Honda XL250 Oil Filter Washers
USD$ 4.40

Oil Filter Washers

#15-0039

Oil Filter Washers Pk/5 30mm OD - 20.5mm ID - .5mm Thickness Replaces OEM# 15414-300-000

USD$ 4.40
Honda XL250 Oil Filter O-Ring
USD$ 1.45

Oil Filter O-Ring

#15-0052

Oil Filter O-Ring Pk/2 Fits Oil Filter - 1L9-13440-90

USD$ 1.45
Honda XL250 Oil Filter O-Ring
USD$ 0.95

Oil Filter O-Ring

#15-0053

Oil Filter O-Ring Pk/2 Fits Oil Filter - 1J7-13440-90

USD$ 0.95
Honda XL250 Oil Filter O-Ring
USD$ 1.10

Oil Filter O-Ring

#15-0054

Oil Filter O-Ring Fits Oil Filter - 16518-45000

USD$ 1.10
Honda XL250 LED Charging System Guage
USD$ 48.05
Out of Stock
Email Me When Available

LED Charging System Guage

#24-2660

LED Charging system indicator Gauge. Shows Voltage of your alternator rising and falling with RPM and gives a clear indication of your charging systems normal operation and early warning of problems. Gauge is Bright High Quality Chrome plated and clamps onto 7/8" Bars and can be easily wired into any point in the system (before a switched load is best). Can be mounted as shown or to handlebar by clamp (included).

USD$ 48.05
Out of Stock
Email Me When Available
Honda XL250 Terminal Crimping Tool
USD$ 14.75

Terminal Crimping Tool

#35-0028

Metric Terminal Crimper Tool. Includes sizes 14-16, 14-18, 18-20, 20-24 and 22-24. Professionally Crimps like factory originals. This tool can be used with flag type terminals.

USD$ 14.75
Honda XL250 Tappet Adjusting Tool Set
USD$ 13.30
Out of Stock
Email Me When Available

Tappet Adjusting Tool Set

#35-0042

Tappet Adjusting Tool Set 4 Piece Set For both 9mm & 10mm valve adjuster screw locknuts. Screwdriver tip & 4mm square tip for valve adjuster screws. For Honda/Yamaha/Suzuki

USD$ 13.30
Out of Stock
Email Me When Available
Honda XL250 Valve Lapping Stick
USD$ 2.40

Valve Lapping Stick

#35-0057

Valve Lapping Stick 1 1/8" & 1 3/8" Cups

USD$ 2.40
Honda XL250 Valve Lapping Stick
USD$ 2.40

Valve Lapping Stick

#35-0058

Valve Lapping Stick 5/8" & 13/16" Cups

USD$ 2.40
Honda XL250 Valve Lapping Stick Set
USD$ 4.65

Valve Lapping Stick Set

#35-0059

Valve Lapping Stick Set/2 5/8" & 13/16" Cups 1 1/8" & 1 3/8" Cups

USD$ 4.65
Honda XL250 382pc O-Rings Kit with Plastic Case
USD$ 18.45

382pc O-Rings Kit with Plastic Case

#35-0066

382pc O-Rings Kit with Plastic Case. 30 different sizes included in mm's. QTY---Width----Inside Dia.---------QTY---Width-----Inside Dia. 20X---1.78mm--2.90mm------------13X---2.62mm--9.19mm 20X---1.78mm--3.69mm------------13X---2.62mm--10.77mm 20X---1.78mm--4.47mm------------13X---2.62mm--12.37mm 20X---1.78mm--5.29mm------------13X---2.62mm--13.95mm 20X---1.78mm--6.07mm------------13X---2.62mm--15.54mm 20X---1.78mm--7.65mm------------13X---2.62mm--17.12mm 20X---1.78mm--9.25mm------------13X---2.62mm--18.72mm 10X---3.53mm--18.64mm----------10X---3.53mm--31.34mm 10X---3.53mm--20.22mm----------10X---3.53mm--32.92mm 10X---3.53mm--21.82mm----------10X---3.53mm--34.52mm 10X---3.53mm--23.39mm----------10X---3.53mm--36.10mm 10X---3.53mm--25.00mm----------10X---3.53mm--37.70mm 10X---3.53mm--26.57mm------------7X---5.34mm--37.47mm 10X---3.53mm--28.17mm------------7X---5.34mm--40.65mm 10X---3.53mm--29.75mm------------7X---5.34mm--43.82mm

USD$ 18.45
Honda XL250 419pc O-Rings Kit with Plastic Case
USD$ 20.70

419pc O-Rings Kit with Plastic Case

#35-0067

419pc O-Rings Kit with Plastic Case. 32 different sizes included metric sizes. QTY---Width----Inside Dia.---------QTY---Width-----Inside Dia. 20X---1.50mm--3.00mm------------13X---2.50mm--11.00mm 23X---1.50mm--7.00mm------------14X---2.50mm--13.00mm 23X---1.50mm--10.0mm------------13X---2.50mm--14.00mm 23X---1.50mm--13.0mm------------14X---2.50mm--16.00mm 20X---2.00mm--4.40mm------------14X---2.50mm--18.00mm 18X---2.00mm--5.00mm------------13X---2.50mm--19.00mm 14X---2.50mm--10.0mm------------14X---2.50mm--21.00mm 13X---2.50mm--22.00mm----------10X---3.50mm--31.00mm 10X---3.50mm--18.00mm----------10X---3.50mm--33.00mm 10X---3.50mm--20.00mm----------10X---3.50mm--34.50mm 10X---3.50mm--22.00mm----------10X---3.50mm--36.00mm 10X---3.50mm--23.50mm----------10X---3.50mm--38.00mm 10X---3.50mm--25.00mm----------10X---3.50mm--41.00mm 10X---3.50mm--26.50mm----------10X---3.50mm--44.00mm 10X---3.50mm--28.00mm----------10X---3.50mm--47.00mm 10X---3.50mm--30.00mm----------10X---3.50mm--50.00mm

USD$ 20.70
Honda XL250 Oil / Fluid Container ~ 2 Liter
USD$ 11.80

Oil / Fluid Container ~ 2 Liter

#35-0088

2 Liter Oil / Fluid Container with Long Spout.

USD$ 11.80
Honda XL250 Piston Pin Puller
USD$ 17.00

Piston Pin Puller

#35-0090

Piston Pin Puller Fits Piston Sizes from 40mm (1 5/8") to 100mm (4") and Piston Pins From 12mm to 17mm Tool has 2 threaded steps 12mm and 17mm. Diameter of the rod that goes through the piston pin is 8.5mm..

USD$ 17.00
Honda XL250 Impact Driver Set
USD$ 16.25

Impact Driver Set

#35-0095

Impact Driver Set Heavy Duty Impact Driver With Slip Resistant Rubber Grip Comes with 6 Piece Bit Set & Case 1/2" Drive, Can also be used with 1/2" Drive Socket

USD$ 16.25
Honda XL250 3/8" Drive Click Type Torque Wrench Tool
USD$ 36.20

3/8" Drive Click Type Torque Wrench Tool

#35-0099

3/8" Drive Window Click Type Torque Wrench Tool with Black Plastic Storage Case. 10-100Ft. Lbs. This click-style torque wrench easily tightens various automotive bolts, from lugs and crankshaft bolts to cylinder heads and engine-mountings. Measures from 10 to 100 foot/pounds in .5 increments.

USD$ 36.20
Honda XL250 Cylinder Stud Installation Tool Set
USD$ 9.60

Cylinder Stud Installation Tool Set

#35-0101

3 Piece Cylinder Stud Installation Tool Set. Installs studs without damaging the threads. Steel construction with black oxide finish for longer tool life. Includes M6 x 1.00, M8 x 1.25 and M10 x 1.25 stud installers. Hex head is 19mm.

USD$ 9.60
Honda XL250 Stud Extractor 1-6mm
USD$ 14.00
Out of Stock
Email Me When Available

Stud Extractor 1-6mm

#35-0102

Stud Extractor 1/4" Drive, used to remove seized or broken studs and bolts. Designed to fit into small areas, where studs may be hard to reach. Use with an impact wrench. Fits studs from (1-6mm)

USD$ 14.00
Out of Stock
Email Me When Available
Honda XL250 Stud Extractor 6-12mm
USD$ 18.45

Stud Extractor 6-12mm

#35-0103

Stud Extractor 3/8" Drive, used to remove seized or broken studs and bolts. Designed to fit into small areas, where studs may be hard to reach. Use with an impact wrench. Fits studs from (6-12mm)

USD$ 18.45
Honda XL250 Replacement Bit Set
USD$ 4.40

Replacement Bit Set

#35-0107

Replacement Bit Set 1 1/2" Standard Driver Bit Set Fits 35-0106 & 35-0095 Impact Drivers Contains 2 Phillips & 2 Slotted Bits

USD$ 4.40
Honda XL250 Replacement Bit Set
USD$ 4.40

Replacement Bit Set

#35-0110

Replacement Bit Set 3" Long Driver Bit Set Fits 35-0106 & 35-0095 Impact Drivers Contains 2 Phillips & 2 Slotted Bits

USD$ 4.40
Honda XL250 Snap Ring Plier Set
USD$ 10.30

Snap Ring Plier Set

#35-0114

Snap Ring Plier Set Removes Internal or External Snap Rings Includes 2 Straight & 2 Angled Tips

USD$ 10.30
The names Honda, Yamaha, Kawasaki, Suzuki and any other trade names or symbols belonging to each respective corporation are stated for reference purposes only. The products on this site are after market (not OEM) replacement parts and accessories only. We have no relationship to the listed companies.