HondaXL250 ► 

Refine Search Results
Honda XL250 Brake Lever
USD$ 5.55
Listed Models

Brake Lever

#08-0066 | Honda XL250 (1972-1976)

Brake Lever OEM Ref # 53175-402-700 / 53170-216-670 / 53175-286-000 / 53170-286-670 / 53170-329-010 / 53170-369-700 / 53175-369-700

USD$ 5.55
Listed Models
Honda XL250 Brake Lever Perch
USD$ 6.95
Listed Models

Brake Lever Perch

#08-0422 | Honda XL250 (1972), XL250 (1974-1976)

Brake Lever Perch, Replaces OEM# 53171-312-003 Includes a RH Thread 10mm Mirror Mount. Fits to 7/8" handlebars and includes a hole for the brake light switch.

USD$ 6.95
Listed Models
Honda XL250 Clutch Lever Perch
USD$ 7.95
Listed Models

Clutch Lever Perch

#08-0432 | Honda XL250 (1972), XL250 (1974-1976)

Clutch Lever Perch, Replaces OEM# 53172-310-010 / 53172-110-000 / 53172-310-000 Includes a 10mm Mirror Mount, for 7/8" handlebars

USD$ 7.95
Listed Models
Honda XL250 Tail Light Assembly
USD$ 24.95
Listed Models

Tail Light Assembly

#10-0028 | Honda XL250 (1972), XL250 (1974-1976)

Tail Light Assembly, Replaces OEM# 33701-329-671 2 Wires

USD$ 24.95
Listed Models
Honda XL250 Ignition Coil with Condenser
USD$ 32.95
Listed Models

Ignition Coil with Condenser

#12-0103 | Honda XL250 (1972-1976)

Ignition Coil with Condenser, Replaces OEM# 30500-950-405 6 Volt, 5.4k Ohm.

USD$ 32.95
Listed Models
Honda XL250 Turn Signal Flasher Relay
USD$ 9.95
Listed Models
Out of Stock
Email Me When Available

Turn Signal Flasher Relay

#12-0104 | Honda XL250 (1972-1976)

Turn Signal Flasher Relay, Replaces OEM# 38310-428-671 / 38300-GFO-405 / 38300-243-670 / 38300-089-671 / 38300-428-004 / 38301-428-671 / 38301-428-004. 6 Volt - 17W - 2 Prong Style Does Not work with LED signals

USD$ 9.95
Listed Models
Out of Stock
Email Me When Available
Honda XL250 Handlebar Rubber Cover Set/2
USD$ 8.50
Listed Models

Handlebar Rubber Cover Set/2

#12-0127 | Honda XL250 (1972-1976)

Handlebar Rubber Cover Set/2 - Replaces OEM# 53176-329-000 (Right Side), 53179-329-000 (Left Side) One rubber for the left and one for the right side per set.

USD$ 8.50
Listed Models
Honda XL250 Stock Type Mirror Set
USD$ 25.95
Listed Models

Stock Type Mirror Set

#16-4669 | Honda XL250 (1972), XL250 (1974-1975)

Stock Type Mirror Set/2, Replaces OEM# 88110-329-730 / 88110-074-000 / 88120-329-730 / 88120-074-000 Chrome Mirrors, 8" Stem Length

USD$ 25.95
Listed Models
Honda XL250 Top End Engine Gasket Set
USD$ 21.95
Listed Models

Top End Engine Gasket Set

#18-0084 | Honda XL250 (1972-1976)

Top End Engine Gasket Set Includes Contents Shown in Photo Honda used different head gaskets on these bikes. 12191-329-010 used up to Engine SN 1062714 and 12909-283-000 used up to Engine SN 2009778. The gasket in this kit is the later style, not the type used in some of the early K0 models from 1972.

USD$ 21.95
Listed Models
Honda XL250 Complete Engine Gasket Set
USD$ 32.95
Listed Models

Complete Engine Gasket Set

#18-0092 | Honda XL250 (1972-1976)

Complete Engine Gasket Set Includes Contents Shown in Photo Honda used different head gaskets on these bikes. 12191-329-010 used up to Engine SN 1062714 and 12909-283-000 used up to Engine SN 2009778. The gasket in this kit is the later style, not the type used in some of the early K0 models from 1972.

USD$ 32.95
Listed Models
Honda XL250 Gear Change Lever
USD$ 11.80
Listed Models

Gear Change Lever

#19-0072 | Honda XL250 (1972-1977)

Gear Change Lever Universal Fit Spline Diameter 11.5mm Total Length 6 1/2" Offset 4"

USD$ 11.80
Listed Models
Honda XL250 Float Bowl Gasket
USD$ 6.60
Listed Models

Float Bowl Gasket

#20-8032 | Honda XL250 (1972-1976)

Float Bowl Gasket

USD$ 6.60
Listed Models
Honda XL250 Rectifier
USD$ 23.95
Listed Models
Out of Stock
Email Me When Available

Rectifier

#24-1999 | Honda XL250 (1972-1976)

Rectifier, Replaces OEM# 31700-385-000 / 31700-356-000 / 31700-329-013

USD$ 23.95
Listed Models
Out of Stock
Email Me When Available
Honda XL250 Fork Dust Seals
USD$ 16.25
Listed Models

Fork Dust Seals

#27-1049 | Honda XL250 (1972-1976)

Fork Dust Seals Set/2 35 X 53 OEM Ref # 91254-434-003 / 91254-435-003 / 51425-340-000

USD$ 16.25
Listed Models
Honda XL250 Cotter Valve / Valve Keeper
USD$ 1.65
Listed Models

Cotter Valve / Valve Keeper

#29-0083 | Honda XL250 (1972), XL250 (1974-1976)

Cotter Valve / Valve Keeper, Replaces OEM# 14781-107-003 / 14781-107-020. 2 Used For Each Valve Spring. Sold Each, Order the Quantity you Require

USD$ 1.65
Listed Models
Honda XL250 Fuel Petcock
USD$ 11.80
Listed Models

Fuel Petcock

#29-0541 | Honda XL250 (1972-1976)

Fuel Petcock, Replaces OEM# 16950-107-000 / 16950-107-005 / 16950-356-005 / 16950-070-700 / 16950-356-700. Single Fuel Output type - Fuel Hose Exits to the Side. Please check the photo, this petcock may not be identical to the OEM type but will work for these models. This petcock has a longer body and the fuel output spigot is located differently then stock for some models.

USD$ 11.80
Listed Models
Honda XL250 Rear Brake Shoes
USD$ 14.75
Listed Models

Rear Brake Shoes

#29-3125B | Honda XL250 (1972-1976)

Rear Brake Shoes Pk/2 Diameter: 138.3mm Width: 25mm OEM Ref # 43120-329-671

USD$ 14.75
Listed Models
Honda XL250 Clutch Plate
USD$ 5.90
Listed Models

Clutch Plate

#39-1079B | Honda XL250 (1972-1975)

Clutch Plate 7 Pieces Required OEM Ref # 22201-286-010 / 22201-415-000 / 22201-ME2-000

USD$ 5.90
Listed Models
Honda XL250 Clutch Spring Kit
USD$ 22.15
Listed Models

Clutch Spring Kit

#39-1502 | Honda XL250 (1972), XL250 (1974-1976)

Clutch Spring Kit. Note: There will be extra springs in this kit for some bikes.

USD$ 22.15
Listed Models
Honda XL250 Carb Rebuild Kit
USD$ 11.80
Listed Models

Carb Rebuild Kit

#48-1374 | Honda XL250 (1972-1975)

Carb Rebuild Kit Includes Items Pictured 1 Kit Needed Per Carb

USD$ 11.80
Listed Models
Honda XL250 Fuel Petcock Gasket
USD$ 2.95
Listed Models

Fuel Petcock Gasket

#49-0259 | Honda XL250 (1972), XL250 (1974-1976)

Fuel Petcock Gasket, Replaces OEM# 16957-ZE1-812 / 16955-028-004 / 16955-011-010

USD$ 2.95
Listed Models
Honda XL250 Fork Cap O-Ring Set/2
USD$ 1.45
Listed Models

Fork Cap O-Ring Set/2

#49-0790 | Honda XL250 (1972), XL250 (1974-1976)

Fork Cap O-Ring Set of 2. 23mm x 2.8mm size. Replaces OEM # 94608-50000 X2.

USD$ 1.45
Listed Models
Honda XL250 Speedometer Cable
USD$ 14.00
Listed Models

Speedometer Cable

#51-2305 | Honda XL250 (1974-1976)

Speedometer Cable - Black - OEM Ref. # 44830-356-000 / 44830-426-830 / 44830-371-010 Length 40.75" Made in Japan

USD$ 14.00
Listed Models
Honda XL250 Seat Lock with Keys
USD$ 18.45
Listed Models

Seat Lock with Keys

#73-0140 | Honda XL250 (1972-1975)

Seat Lock with Keys, Replaces OEM # 77230-399-007 / 77230-107-711 This seat lock works perfect for the bikes listed but the locking mechanism sticks out a bit farther then the OEM type. If you have lost your old key you have to remove the seat lock bracket and assembly. This can be done with a short 10mm wrench or socket, once that's done the rest is easy.

USD$ 18.45
Listed Models
Honda XL250 Seat Lock Bar Assembly
USD$ 39.95
Listed Models
Out of Stock
Email Me When Available

Seat Lock Bar Assembly

#73-1070 | Honda XL250 (1972), XL250 (1974-1975)

Seat Lock Bar Assembly, Replaces OEM# 77220-340-003 / 77220-340-011

USD$ 39.95
Listed Models
Out of Stock
Email Me When Available
Honda XL250 Piston Pin Clips (Pk/2)
USD$ 0.95
Listed Models

Piston Pin Clips (Pk/2)

#73-1169 | Honda XL250 (1972-1976)

Piston Pin Clips, 19mm (Pk/2) - Replaces OEM # 94601-19000

USD$ 0.95
Listed Models
Honda XL250 Piston Pin
USD$ 5.95
Listed Models

Piston Pin

#73-1170 | Honda XL250 (1972-1976)

Piston Pin - Replaces OEM # 13111-428-000 / 13111-471-000

USD$ 5.95
Listed Models
Honda XL250 Seat Cover
USD$ 44.95
Listed Models

Seat Cover

#99-4824 | Honda XL250 (1972-1975)

Replacement Seat Cover with Reinforced Passenger Strap (No trim or hardware included just re-use existing hardware). Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Replace your stock seat cover and fasten just like the original cover. Our covers are made of special cold resistant outdoor 4-way stretch Marine grade vinyl material (please note that this is not the cheap vinyl that most of the others sell, this is the very best vinyl available) Designed for heavy outdoor use. Note- No "Honda" printed on this cover. Fits: the Original Stock Honda XL250K 72-75 and XL350K 74-75 This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference

USD$ 44.95
Listed Models
Honda XL250 Clutch Cable
USD$ 12.95
Listed Models

Clutch Cable

#99-4874 | Honda XL250 (1972), XL250 (1974-1976)

Clutch Cable, Replaces OEM# 22870-435-610 / 22870-429-000 / 22870-428-000 / 22870-KB4-000 / 22870-400-000 / 22870-329-000 / 22870-356-000

USD$ 12.95
Listed Models
Honda XL250 Front Brake Cable
USD$ 10.95
Listed Models

Front Brake Cable

#99-4888 | Honda XL250 (1972), XL250 (1974-1976)

Front Brake Cable, Replaces OEM# 45450-329-010

USD$ 10.95
Listed Models
Honda XL250 Battery Box Rubber
USD$ 3.75
Listed Models

Battery Box Rubber

#99-4986 | Honda XL250 (1974-1975)

Battery Box Rubber, Replaces OEM# 83618-323-000 Sold Each, Order the Quantity you Require

USD$ 3.75
Listed Models
Honda XL250 Handmade Christmas Stocking
USD$ 44.95

Handmade Christmas Stocking

#00-0007

HAPPY HOLIDAYS! We are thrilled to be able to offer handmade, one-of-a-kind upcycled Christmas stockings by “Rider Rags”. Featuring a CB750 on the front. They include belt, chain and Honda keychain. Each stocking is individually handmade so there will be variations in denim and belts. Some toes face right and some left. If you have a preference for right/left toe facing make a note in the order comments.

USD$ 44.95
Honda XL250 Universal Glas-Pak Insert
SALE: USD$ 12.00
(USD$ 19.95)

Universal Glas-Pak Insert

#009-0317

Universal Glas-Pak Insert - 1 1/2" Pipes Tone down your TT or Drag Pipes

SALE: USD$ 12.00
(USD$ 19.95)
Honda XL250 Tire Valve Stem
USD$ 3.65

Tire Valve Stem

#01-0166

Tire Valve Stem - Straight Metal Type

USD$ 3.65
Honda XL250 Tire Valve Stem
USD$ 1.45

Tire Valve Stem

#01-0167

Tire Valve Stem - Straight Rubber Type

USD$ 1.45
Honda XL250 Tire Valve Stem
USD$ 2.60

Tire Valve Stem

#01-0168

Tire Valve Stem Metal Type

USD$ 2.60
Honda XL250 Tire Valve Stem
USD$ 2.90

Tire Valve Stem

#01-0169

Tire Valve Stem - 90 Degree Metal Type

USD$ 2.90
Honda XL250 Tire Valve Stem Caps
USD$ 5.90

Tire Valve Stem Caps

#01-0170

Tire Valve Stem Caps - Pk/10 Metal Caps with Core Removal Notch Built In

USD$ 5.90
Honda XL250 Tire Valve Stem Caps
USD$ 1.45

Tire Valve Stem Caps

#01-0171

Tire Valve Stem Caps - Pk/2 Metal Caps with Core Removal Notch

USD$ 1.45
Honda XL250 Tire Fill Valve
USD$ 3.65

Tire Fill Valve

#01-0173

Ninety Degree Tire Fill Valve

USD$ 3.65
Honda XL250 Rivet Link
USD$ 2.20

Rivet Link

#01-8801

Cam Chain Rivet Link Stepped Parallel Plate Fits BF05T Cam Chains

USD$ 2.20
Honda XL250 Rivet Link
USD$ 3.35

Rivet Link

#01-8802

Cam Chain Rivet Link Stepped Parallel Plate Fits 219FTSS Cam Chains

USD$ 3.35
Honda XL250 Rivet Link
USD$ 2.90

Rivet Link

#01-8803

Cam Chain Rivet Link Stepped Peanut Plate Fits 219T Cam Chains

USD$ 2.90
Honda XL250 Clip Link
USD$ 2.20

Clip Link

#01-8813

Cam Chain Clip Link Peanut Shape Fits 25H Cam Chains

USD$ 2.20
Honda XL250 Cam Chain Rivet Link
USD$ 2.90

Cam Chain Rivet Link

#01-8814

Cam Chain Rivet Link Peanut Shape Fits BS05MH TSUBAKI

USD$ 2.90
Honda XL250 Cam Chain Rivet Link
USD$ 2.20

Cam Chain Rivet Link

#01-8815

Cam Chain Rivet Link Peanut Shape Fits BF05M TSUBAKI

USD$ 2.20
Honda XL250 Cam Chain Rivet Link
USD$ 2.90

Cam Chain Rivet Link

#01-8816

Cam Chain Rivet Link Fits 82RH2015

USD$ 2.90
Honda XL250 Custom Micro Push Button/Kill Switch
USD$ 15.50

Custom Micro Push Button/Kill Switch

#01-9924

Custom Micro Push Button/Kill Switch. High quality chrome switch designed to clean up the appearance of your bike while allowing the use of a switch. Works great as a hidden start/kill or horn button. Includes a contoured washer which allows for installations on round surfaces such as handlebars or frames. Switch Size 14mm x 12mm with 2X 20" wires.

USD$ 15.50
Honda XL250 Push/Pull Style Throttle Assembly
USD$ 17.00

Push/Pull Style Throttle Assembly

#02-1222

Custom Dual Cable Style (Push/Pull) Throttle Assembly for 7/8" bars. Satin Black Die-Cast aluminum housing with a nylon throttle tube. Housing is threaded to accept Honda push/pull throttle cables. Opens carbs up to 38mm. Allen key included for assembly. Pull cable thread size is M10 x 1.25mm, Push cable thread size is M12 x 1.00mm. Throttle is 6" total in length.

USD$ 17.00
Honda XL250 Heated Grips
SALE: USD$ 34.95
(USD$ 36.95)

Heated Grips

#02-1231

Heated Grip Set/2 for 7/8" HANDLEBARS ONLY. Warms up when the engine is running. Features a high/low/off switch. Easy to use relay protected sealed controls. Rubber resistant to low temperatures and resists cracking. Easy install with no gluing needed. 130mm Length

SALE: USD$ 34.95
(USD$ 36.95)
The names Honda, Yamaha, Kawasaki, Suzuki and any other trade names or symbols belonging to each respective corporation are stated for reference purposes only. The products on this site are after market (not OEM) replacement parts and accessories only. We have no relationship to the listed companies.