Honda ► XL250K ►
-
Here’s our hand-picked list of parts and accessories for your Honda XL250K►
- Honda
Kickstart Rubber
Kickstart Rubber OEM Ref # 28311-329-000 / 95011-51000 / 28311-342-000
Gear Change Rubber
Gear Change Rubber OEM Ref # 95011-400-000
Brake Lever
Brake Lever OEM Ref # 53175-402-700 / 53170-216-670 / 53175-286-000 / 53170-286-670 / 53170-329-010 / 53170-369-700 / 53175-369-700
Brake Lever Perch
Brake Lever Perch, Replaces OEM# 53171-312-003 Includes a RH Thread 10mm Mirror Mount. Fits to 7/8" handlebars and includes a hole for the brake light switch.
Clutch Lever Perch
Clutch Lever Perch, Replaces OEM# 53172-310-010 / 53172-110-000 / 53172-310-000 Includes a 10mm Mirror Mount, for 7/8" handlebars
Tail Light Assembly
Tail Light Assembly, Replaces OEM# 33701-329-671 2 Wires
Stop Light Switch
Rear Stop Light Switch OEM Ref # 35350-292-003 / 35350-KJ9-405
Ignition Coil with Condenser
Ignition Coil with Condenser, Replaces OEM# 30500-950-405 6 Volt, 5.4k Ohm.
Turn Signal Flasher Relay
Turn Signal Flasher Relay, Replaces OEM# 38310-428-671 / 38300-GFO-405 / 38300-243-670 / 38300-089-671 / 38300-428-004 / 38301-428-671 / 38301-428-004. 6 Volt - 17W - 2 Prong Style Does Not work with LED signals
Handlebar Rubber Cover Set/2
Handlebar Rubber Cover Set/2 - Replaces OEM# 53176-329-000 (Right Side), 53179-329-000 (Left Side) One rubber for the left and one for the right side per set.
Denso Ignition Contact Points
Contact Points (1pc.) - Replaces OEM # 30202-107-004 / 30202-216-004 / 30202-107-154 These points are for Nippondenso ignitions Only. They are NOT for Hitachi or Kokusan Ignitions. Please check which type you have before ordering. Honda used different ignition systems on some of the same years of bikes.
Stock Type Mirror Set
Stock Type Mirror Set/2, Replaces OEM# 88110-329-730 / 88110-074-000 / 88120-329-730 / 88120-074-000 Chrome Mirrors, 8" Stem Length
Top End Engine Gasket Set
Top End Engine Gasket Set Includes Contents Shown in Photo Honda used different head gaskets on these bikes. 12191-329-010 used up to Engine SN 1062714 and 12909-283-000 used up to Engine SN 2009778. The gasket in this kit is the later style, not the type used in some of the early K0 models from 1972.
Complete Engine Gasket Set
Complete Engine Gasket Set Includes Contents Shown in Photo Honda used different head gaskets on these bikes. 12191-329-010 used up to Engine SN 1062714 and 12909-283-000 used up to Engine SN 2009778. The gasket in this kit is the later style, not the type used in some of the early K0 models from 1972.
Float Bowl Gasket
Float Bowl Gasket
Rectifier
Rectifier, Replaces OEM# 31700-385-000 / 31700-356-000 / 31700-329-013
Fork Seals
Fork Seals Set/2 35 X 48 X 10.5/11
Fork Dust Seals
Fork Dust Seals Set/2 35 X 53 OEM Ref # 91254-434-003 / 91254-435-003 / 51425-340-000
Cotter Valve / Valve Keeper
Cotter Valve / Valve Keeper, Replaces OEM# 14781-107-003 / 14781-107-020. 2 Used For Each Valve Spring. Sold Each, Order the Quantity you Require
Speedo Gear Plug
Speedo Gear Plug - Plug 15mm Outer Diameter, 22mm Long. This Plug is Great for Keeping your Original Speedo Drive Gear Clean.
Fuel Petcock
Fuel Petcock, Replaces OEM# 16950-107-000 / 16950-107-005 / 16950-356-005 / 16950-070-700 / 16950-356-700. Single Fuel Output type - Fuel Hose Exits to the Side. Please check the photo, this petcock may not be identical to the OEM type but will work for these models. This petcock has a longer body and the fuel output spigot is located differently then stock for some models.
Rear Brake Shoes
Rear Brake Shoes Pk/2 Diameter: 138.3mm Width: 25mm OEM Ref # 43120-329-671
Special Oil Filter Rotor Washer
Special Angled Oil Filter Rotor Washer (16mm), Replaces OEM# 90481-292-000
Clutch Spring Kit
Clutch Spring Kit. Note: There will be extra springs in this kit for some bikes.
Carb Rebuild Kit
Carb Rebuild Kit Includes Items Pictured 1 Kit Needed Per Carb
Fuel Petcock Gasket
Fuel Petcock Gasket, Replaces OEM# 16957-ZE1-812 / 16955-028-004 / 16955-011-010
Fuel Petcock Gasket
Fuel Petcock Gasket / O-Ring, Replaces OEM# 16997-273-006 / 16960-011-000 This is the o-ring that goes between the fuel petcock body and the gas tank. Please ensure you have a stock gas tank prior to ordering
Cam Chain
Cam Chain 219T x 94 D.I.D (Daido) Takes 01-8803 Rivet Link Pitch: .3061" Side Plate: Peanut Average Tensile Strength: 1800lbs OEM Ref # 14401-286-003 / 14401-410-003
Seat Lock with Keys
Seat Lock with Keys, Replaces OEM # 77230-399-007 / 77230-107-711 This seat lock works perfect for the bikes listed but the locking mechanism sticks out a bit farther then the OEM type. If you have lost your old key you have to remove the seat lock bracket and assembly. This can be done with a short 10mm wrench or socket, once that's done the rest is easy.
Gas Tank Decal Set
Honda XL250 (1972) Custom Silver Metallic USA Model Gas Tank Decal (Sticker) 6 Pc. Set. These reproduction decals will add the finishing touch to your restoration. These decals are no longer available from the manufacturer. All decals are "printed" on the highest quality materials from companies such as 3M and Avery. All decals have a protective coating to resist scratching and to protect colors from UV rays. These decals are adhesive backed for simple application.
Complete Decal Set
Honda XL250 (1972) Custom Silver Metallic USA Model Gas Tank Decal (Sticker) 6 Pc and Front & Rear Fender Decals 6pcs. These reproduction decals will add the finishing touch to your restoration. These decals are no longer available from the manufacturer. All decals are "printed" on the highest quality materials from companies such as 3M and Avery. All decals have a protective coating to resist scratching and to protect colors from UV rays. These decals are adhesive backed for simple application.
Front & Rear Fender Decal Set
Honda XL250 (1972) Custom Silver Metallic USA Model Front & Rear Fender Decal Set - 6pcs. These reproduction decals will add the finishing touch to your restoration. These decals are no longer available from the manufacturer. All decals are "printed" on the highest quality materials from companies such as 3M and Avery. All decals have a protective coating to resist scratching and to protect colors from UV rays. These decals are adhesive backed for simple application.
Warning & Service Label Decal Set
Honda XL250 (1972) USA Model Warning & Service Label Decal (Sticker) Set - 9pcs. These reproduction decals will add the finishing touch to your restoration. These decals are no longer available from the manufacturer. All decals are "printed" on the highest quality materials from companies such as 3M and Avery. All decals have a protective coating to resist scratching and to protect colors from UV rays. These decals are adhesive backed for simple application.
Valve Stem Seal
Valve Stem Seal. Replaces OEM # 12209-333-005 / 12209-333-005 Sold Each - Order the Quantity you Require
Rear Wheel Bearing Retainer
Rear Wheel Bearing Retainer - Brake Disc Side - Replaces OEM# 41231-286-000
Seat Lock Bar Assembly
Seat Lock Bar Assembly, Replaces OEM# 77220-340-003 / 77220-340-011
Piston Pin Clips (Pk/2)
Piston Pin Clips, 19mm (Pk/2) - Replaces OEM # 94601-19000
Piston Pin
Piston Pin - Replaces OEM # 13111-428-000 / 13111-471-000
Cylinder Head Gasket
Cylinder Head Gasket, Replaces OEM# 12251-329-306 / 12251-329-307 / 12251-329-010 / 12251-329-770
Points Cover Gasket
Points Cover Gasket, Replaces OEM# 30372-329-306 / 30372-329-000
Cylinder Base Gasket
Cylinder Base Gasket, Replaces OEM# 12191-329-307 / 12191-329-770 / 12191-329-010 / 12191-376-306 / 12191-376-000.
Left Crankcase Cover Gasket
Left Crankcase Cover Gasket, Replaces OEM# 11395-329-306 / 11395-329-000
Right Crankcase Cover Gasket
Right Crankcase Cover Gasket, Replaces OEM# 11394-329-306 / 11394-356-306 / 11394-356-000
Oil Pump Cover Gasket
Oil Pump Cover Gasket, Replaces OEM# 15129-329-010
Cylinder Head Gasket
Cylinder Head Gasket, Replaces OEM# 12909-428-003 / 12909-283-000 / 12909-333-000.
Seat Cover
Replacement Seat Cover with Reinforced Passenger Strap (No trim or hardware included just re-use existing hardware). Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Replace your stock seat cover and fasten just like the original cover. Our covers are made of special cold resistant outdoor 4-way stretch Marine grade vinyl material (please note that this is not the cheap vinyl that most of the others sell, this is the very best vinyl available) Designed for heavy outdoor use. Note- No "Honda" printed on this cover. Fits: the Original Stock Honda XL250K 72-75 and XL350K 74-75 This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
Clutch Cable
Clutch Cable, Replaces OEM# 22870-435-610 / 22870-429-000 / 22870-428-000 / 22870-KB4-000 / 22870-400-000 / 22870-329-000 / 22870-356-000
Front Brake Cable
Front Brake Cable, Replaces OEM# 45450-329-010