YamahaCT1 ► 

Refine Search Results
Yamaha CT1 Brake Bleeder Hose Kit
USD$ 9.60

Brake Bleeder Hose Kit

#35-0072

Brake Bleeder Hose Kit. Kit includes 1-way valve, hose and clamps. This tool helps bleed motorcycle brakes quickly and easily. The 1-way valve prevents air from flowing back into the brake lines. Easy to use, simply connect and pump.

USD$ 9.60
Yamaha CT1 Steering Bearing Installation Tool
USD$ 40.65

Steering Bearing Installation Tool

#35-0073

Steering Bearing Installation Tool. Includes one driver and three aluminum adapters. Unique system utilizes specially designed aluminum adaptors to quickly and accurately install nearly any lower bearing. Use with a soft faced hammer.

USD$ 40.65
Yamaha CT1 Combination Flywheel Puller Driver Set
USD$ 57.70
Out of Stock
Email Me When Available

Combination Flywheel Puller Driver Set

#35-0074

10 Piece Combination Flywheel Puller Driver Set. Used to separate flywheel from the crankshaft taper. Supplied in a labelled plastic storage case. This 10 pieces set provides 15 different applications, sizes as follows: M14x1.5, M16x1.5, M18x1.5, M19x1.0, M20x1.0, M27x1.25, M22x1.0, M25x1.5, M22x1.5, M26x1.5, M24x1.0, M27x1.0, M26x1.0, M28x1.0, M28x1.5 Except for M27X1.0, all applications have right hand threads.

USD$ 57.70
Out of Stock
Email Me When Available
Yamaha CT1 Folding Trail T-Handle Kit
USD$ 5.15

Folding Trail T-Handle Kit

#35-0077

Folding Trail T-Handle Kit Come with 4 Sockets - 8mm, 10mm, 12mm & 13mm.

USD$ 5.15
Yamaha CT1 Spark Plug Wrench
USD$ 3.65

Spark Plug Wrench

#35-0078

Spark Plug Wrench Fits 18mm Spark Plugs 160mm Overall Length

USD$ 3.65
Yamaha CT1 Fusil Type Tire Lever
USD$ 9.60

Fusil Type Tire Lever

#35-0079

Fusil Type Tire Lever Chrome Finish

USD$ 9.60
Yamaha CT1 Dunlop Type Tire Lever
USD$ 9.60

Dunlop Type Tire Lever

#35-0080

Dunlop Type Tire Lever 16" Long

USD$ 9.60
Yamaha CT1 Chain Press Assembly Tool
USD$ 4.80

Chain Press Assembly Tool

#35-0081

Chain Press Assembly Tool Used to Press On Sideplates on rivet or clip rear drive chains

USD$ 4.80
Yamaha CT1 Chain Breaker
USD$ 22.15

Chain Breaker

#35-0083

Chain Breaker 520/530/630 Chain

USD$ 22.15
Yamaha CT1 Carburetor Adjusting Tool
USD$ 14.00

Carburetor Adjusting Tool

#35-0084

Carburetor Adjusting Tool. Works with Mikuni or Keihin carbs. 11" long tool with a 8mm hex nut and screwdriver slot adjusting bolt. This combo design allows unlocking of the locknut, adjustments to the balancing screw and re-locking the lock nut in one step.

USD$ 14.00
Yamaha CT1 Carburetor Synchronizer Vacuum Gauge ~ 2,3,4 Cylinders
USD$ 62.85

Carburetor Synchronizer Vacuum Gauge ~ 2,3,4 Cylinders

#35-0085

Carburetor and throttle body synchronizer kit for bikes with 2, 3 or 4 Cylinders. Makes synching your carburetor setup fast and easy! For use with Honda, Kawasaki, and Suzuki models (which typically have 5mm connections) that use sets of 2, 3 or 4 cylinders. Includes 4 easy to read gauges, Mountable bracket, 180mm extensions - 5mm threads, 65mm extensions - 5mm threads,Necessary hoses, Dampening valves (included to help control needle jump) and instructions.

USD$ 62.85
Yamaha CT1 Tire Gauge
USD$ 4.40

Tire Gauge

#35-0086

Tire Gauge Low Pressure 1-8 PSI

USD$ 4.40
Yamaha CT1 Safety Wire
USD$ 5.15

Safety Wire

#35-0087

Stainless Steel Safety Wire 25 Foot Roll of .032" Dia Wire

USD$ 5.15
Yamaha CT1 Oil / Fluid Container ~ 2 Liter
USD$ 11.80

Oil / Fluid Container ~ 2 Liter

#35-0088

2 Liter Oil / Fluid Container with Long Spout.

USD$ 11.80
Yamaha CT1 Digital Tire Gauge
USD$ 11.05
Out of Stock
Email Me When Available

Digital Tire Gauge

#35-0089

Digital Tire Pressure Gauge Measures 1-100 PSI (0.1 - 7.0 Bar)

USD$ 11.05
Out of Stock
Email Me When Available
Yamaha CT1 Piston Pin Puller
USD$ 17.00

Piston Pin Puller

#35-0090

Piston Pin Puller Fits Piston Sizes from 40mm (1 5/8") to 100mm (4") and Piston Pins From 12mm to 17mm Tool has 2 threaded steps 12mm and 17mm. Diameter of the rod that goes through the piston pin is 8.5mm..

USD$ 17.00
Yamaha CT1 Wheel Bearing Remover Set
USD$ 50.30

Wheel Bearing Remover Set

#35-0092

8 Piece Metric Wheel Bearing Remover Set in a Plastic Case. Includes a large and small driver with 10mm, 12mm, 15mm, 17mm, 20mm and 25mm removers. Dependable split collet design.

USD$ 50.30
Yamaha CT1 Tire Pressure Gauge
USD$ 3.35

Tire Pressure Gauge

#35-0093

Tire Pressure Gauge Dial Type Measures From 10-60 PSI

USD$ 3.35
Yamaha CT1 6-Way Spoke Wrench
USD$ 4.80

6-Way Spoke Wrench

#35-0094

6-Way Spoke Wrench Fits #7 Thru #12 nipples

USD$ 4.80
Yamaha CT1 Impact Driver Set
USD$ 16.25

Impact Driver Set

#35-0095

Impact Driver Set Heavy Duty Impact Driver With Slip Resistant Rubber Grip Comes with 6 Piece Bit Set & Case 1/2" Drive, Can also be used with 1/2" Drive Socket

USD$ 16.25
Yamaha CT1 Round Magnetic Parts Dish
USD$ 7.35

Round Magnetic Parts Dish

#35-0097

Round Stainless Steel Magnetic Parts Dish. Very useful when working with small screws, hardware and parts. 149mm Diameter, 40mm Height.

USD$ 7.35
Yamaha CT1 Rectangular Magnetic Parts Dish
USD$ 11.05

Rectangular Magnetic Parts Dish

#35-0098

Rectangular Stainless Steel Magnetic Parts Dish. Very useful when working with small screws, hardware and parts. 9.5" Length, 5.5" Width, 1.1" Height.

USD$ 11.05
Yamaha CT1 3/8" Drive Click Type Torque Wrench Tool
USD$ 36.20

3/8" Drive Click Type Torque Wrench Tool

#35-0099

3/8" Drive Window Click Type Torque Wrench Tool with Black Plastic Storage Case. 10-100Ft. Lbs. This click-style torque wrench easily tightens various automotive bolts, from lugs and crankshaft bolts to cylinder heads and engine-mountings. Measures from 10 to 100 foot/pounds in .5 increments.

USD$ 36.20
Yamaha CT1 Extractor & Drill Set
USD$ 13.30

Extractor & Drill Set

#35-0100

10 Piece Extractor & Drill Set in a Plastic Case. Set contains 5X extractors (#1 through #5) and 5X mechanic's length cobalt drills. Removes bolts and screws up to 5/8". Cobalt Drill and Screw Extractor Sizes: 5/64", 7/64", 5/32", 1/4", 19/64"

USD$ 13.30
Yamaha CT1 Cylinder Stud Installation Tool Set
USD$ 9.60

Cylinder Stud Installation Tool Set

#35-0101

3 Piece Cylinder Stud Installation Tool Set. Installs studs without damaging the threads. Steel construction with black oxide finish for longer tool life. Includes M6 x 1.00, M8 x 1.25 and M10 x 1.25 stud installers. Hex head is 19mm.

USD$ 9.60
Yamaha CT1 Stud Extractor 1-6mm
USD$ 14.00

Stud Extractor 1-6mm

#35-0102

Stud Extractor 1/4" Drive, used to remove seized or broken studs and bolts. Designed to fit into small areas, where studs may be hard to reach. Use with an impact wrench. Fits studs from (1-6mm)

USD$ 14.00
Yamaha CT1 Stud Extractor 6-12mm
USD$ 18.45

Stud Extractor 6-12mm

#35-0103

Stud Extractor 3/8" Drive, used to remove seized or broken studs and bolts. Designed to fit into small areas, where studs may be hard to reach. Use with an impact wrench. Fits studs from (6-12mm)

USD$ 18.45
Yamaha CT1 Impact Driver
USD$ 14.75

Impact Driver

#35-0106

Impact Driver Heavy Duty #2500 Driver complete with 4 Piece 2" Hex bits. This driver is 3/8" drive can also be used with any 3/8" drive socket.

USD$ 14.75
Yamaha CT1 Replacement Bit Set
USD$ 4.40

Replacement Bit Set

#35-0107

Replacement Bit Set 1 1/2" Standard Driver Bit Set Fits 35-0106 & 35-0095 Impact Drivers Contains 2 Phillips & 2 Slotted Bits

USD$ 4.40
Yamaha CT1 Cable Luber
USD$ 4.40

Cable Luber

#35-0108

Cable Luber Used on All Cables, Best way to lube & clear cables of moisture & Dirt.

USD$ 4.40
Yamaha CT1 Spoke Wrench Set
USD$ 5.90

Spoke Wrench Set

#35-0109

Spoke Wrench Set Fits #8/9 & #10/11 Chrome

USD$ 5.90
Yamaha CT1 Replacement Bit Set
USD$ 4.40

Replacement Bit Set

#35-0110

Replacement Bit Set 3" Long Driver Bit Set Fits 35-0106 & 35-0095 Impact Drivers Contains 2 Phillips & 2 Slotted Bits

USD$ 4.40
Yamaha CT1 Cam Chain Breaker / Riveter Tool
USD$ 51.75

Cam Chain Breaker / Riveter Tool

#35-0112

Cam Chain Breaker / Riveter Tool

USD$ 51.75
Yamaha CT1 Spring Puller
USD$ 5.15

Spring Puller

#35-0113

Spring Puller, Made from Heat Treated Alloy Steel. Great for Removing and Installing Those Hard to Reach Springs.

USD$ 5.15
Yamaha CT1 Snap Ring Plier Set
USD$ 10.30

Snap Ring Plier Set

#35-0114

Snap Ring Plier Set Removes Internal or External Snap Rings Includes 2 Straight & 2 Angled Tips

USD$ 10.30
Yamaha CT1 Valve Spring Compressor
USD$ 36.95

Valve Spring Compressor

#35-0115

Valve Spring Compressor Kit in a Plastic Storage Case. Includes adapter sizes 16mm, 19mm, 23mm, 25mm and 30mm.

USD$ 36.95
Yamaha CT1 Replacement Cam Chain Breaker Pin
USD$ 8.85

Replacement Cam Chain Breaker Pin

#35-0117

Replacement Cam Chain Breaker Pin For Our Breaker 35-0112

USD$ 8.85
Yamaha CT1 Hex Axle Tool
USD$ 14.75

Hex Axle Tool

#35-0120

Universal Hex Axle Tool, Heavy duty Suitable for shop use. Sizes 17, 19, 22, 24. 3/8 Drive on both ends Made with high quality heat treated steel.

USD$ 14.75
Yamaha CT1 Oil Filter Wrench
USD$ 8.85
Out of Stock
Email Me When Available

Oil Filter Wrench

#35-0121

Oil Filter Wrench Wafer-Thin For GL1500 Goldwings Also Works On Many other Honda/Yamaha/Kawasaki Models

USD$ 8.85
Out of Stock
Email Me When Available
Yamaha CT1 Permatex Valve Lapping Paste
USD$ 11.05
Out of Stock
Email Me When Available

Permatex Valve Lapping Paste

#35-0124

Valve Lapping Paste - Permatex Aids valve grinding and seating operations to remove burrs, surface defects, carbon and corrosion. Mixes with water to form an easy to use paste.

USD$ 11.05
Out of Stock
Email Me When Available
Yamaha CT1 Chain Puller
USD$ 9.60

Chain Puller

#35-0130

Chain Puller Pulls Together Chain Ends to Allow Joiner Link To be Slipped Into Place

USD$ 9.60
Yamaha CT1 T-Handle Wrench
SALE: USD$ 3.95
(USD$ 4.40)
Out of Stock
Email Me When Available

T-Handle Wrench

#35-0131

T-Handle Wrench 5mm Allen

SALE: USD$ 3.95
(USD$ 4.40)
Out of Stock
Email Me When Available
Yamaha CT1 Spark Plug Gapping Tool
USD$ 2.90

Spark Plug Gapping Tool

#35-0136

Circular Spark plug gap tool. Marked in thousandths of an inch and millimeters.

USD$ 2.90
Yamaha CT1 Valve Shim Tool
USD$ 9.60
Out of Stock
Email Me When Available

Valve Shim Tool

#35-1040

Valve Shim Tool Suz GS550/750/850/1000

USD$ 9.60
Out of Stock
Email Me When Available
Yamaha CT1 Valve Shim Tool
USD$ 9.60
Out of Stock
Email Me When Available

Valve Shim Tool

#35-1041

Valve Shim Tool Honda CBX, CB750/900

USD$ 9.60
Out of Stock
Email Me When Available
Yamaha CT1 Fork Cap Socket Tool
USD$ 4.40

Fork Cap Socket Tool

#35-1082

19mm Fork Cap Socket Tool, This Tool Is Needed To Loosen Or Remove The Front Fork Cap Bolts On Many Bikes

USD$ 4.40
Yamaha CT1 Fork Oil Level Gauge
USD$ 14.75

Fork Oil Level Gauge

#35-1084

Fork Oil Level Gauge For Adjusting The Oil Level On All Forks. Adjustable Ring Measures Oil Levels From 0-300mm in 50mm Increments. 60ml Capacity Syringe Adjusts Fluid Levels.

USD$ 14.75
Yamaha CT1 Brake Caliper Piston Tool
USD$ 17.70

Brake Caliper Piston Tool

#35-1086

Brake Caliper Piston Tool Holding/Detaching Tool For Brake Calipers. Grabs Brake Caliper Pistons Internally So Seized Pistons Can Be Worked Loose From The Caliper.

USD$ 17.70
Yamaha CT1 Leakdown Tester
USD$ 87.30

Leakdown Tester

#35-1377

Leakdown Tester Dual Guage Tester Complete With 25" hose with Stepped adaptor One Dial Guage Reads 0-100PSI, Other Reads 0-100 Percent

USD$ 87.30
Yamaha CT1 Feeler Gauge Set
USD$ 3.65
Out of Stock
Email Me When Available

Feeler Gauge Set

#35-1766

Feeler Gauge Set 45 Degree Ends- Metric Feeler Gauge Set for setting valve clearances. 9pc. Set (marked in metric sizes only). 0.229mm. - (.009") 0.381mm. - (.015") 0.406mm. - (.016") 0.432mm. - (.017") 0.457mm. - (.018") 0.483mm. - (.019") 0.508mm. - (.020") 0.533mm. - (.021") 0.660mm. - (.026")

USD$ 3.65
Out of Stock
Email Me When Available
The names Honda, Yamaha, Kawasaki, Suzuki and any other trade names or symbols belonging to each respective corporation are stated for reference purposes only. The products on this site are after market (not OEM) replacement parts and accessories only. We have no relationship to the listed companies.