YamahaWR450F ► 

Refine Search Results
Yamaha WR450F Terminal Crimping Tool
USD$ 14.75

Terminal Crimping Tool

#35-0028

Metric Terminal Crimper Tool. Includes sizes 14-16, 14-18, 18-20, 20-24 and 22-24. Professionally Crimps like factory originals. This tool can be used with flag type terminals.

USD$ 14.75
Yamaha WR450F Tappet Adjusting Tool Set
USD$ 13.30
Out of Stock
Email Me When Available

Tappet Adjusting Tool Set

#35-0042

Tappet Adjusting Tool Set 4 Piece Set For both 9mm & 10mm valve adjuster screw locknuts. Screwdriver tip & 4mm square tip for valve adjuster screws. For Honda/Yamaha/Suzuki

USD$ 13.30
Out of Stock
Email Me When Available
Yamaha WR450F Valve Lapping Stick
USD$ 2.40

Valve Lapping Stick

#35-0057

Valve Lapping Stick 1 1/8" & 1 3/8" Cups

USD$ 2.40
Yamaha WR450F Valve Lapping Stick
USD$ 2.40

Valve Lapping Stick

#35-0058

Valve Lapping Stick 5/8" & 13/16" Cups

USD$ 2.40
Yamaha WR450F Valve Lapping Stick Set
USD$ 4.65

Valve Lapping Stick Set

#35-0059

Valve Lapping Stick Set/2 5/8" & 13/16" Cups 1 1/8" & 1 3/8" Cups

USD$ 4.65
Yamaha WR450F 382pc O-Rings Kit with Plastic Case
USD$ 18.45

382pc O-Rings Kit with Plastic Case

#35-0066

382pc O-Rings Kit with Plastic Case. 30 different sizes included in mm's. QTY---Width----Inside Dia.---------QTY---Width-----Inside Dia. 20X---1.78mm--2.90mm------------13X---2.62mm--9.19mm 20X---1.78mm--3.69mm------------13X---2.62mm--10.77mm 20X---1.78mm--4.47mm------------13X---2.62mm--12.37mm 20X---1.78mm--5.29mm------------13X---2.62mm--13.95mm 20X---1.78mm--6.07mm------------13X---2.62mm--15.54mm 20X---1.78mm--7.65mm------------13X---2.62mm--17.12mm 20X---1.78mm--9.25mm------------13X---2.62mm--18.72mm 10X---3.53mm--18.64mm----------10X---3.53mm--31.34mm 10X---3.53mm--20.22mm----------10X---3.53mm--32.92mm 10X---3.53mm--21.82mm----------10X---3.53mm--34.52mm 10X---3.53mm--23.39mm----------10X---3.53mm--36.10mm 10X---3.53mm--25.00mm----------10X---3.53mm--37.70mm 10X---3.53mm--26.57mm------------7X---5.34mm--37.47mm 10X---3.53mm--28.17mm------------7X---5.34mm--40.65mm 10X---3.53mm--29.75mm------------7X---5.34mm--43.82mm

USD$ 18.45
Yamaha WR450F Oil / Fluid Container ~ 2 Liter
USD$ 11.80

Oil / Fluid Container ~ 2 Liter

#35-0088

2 Liter Oil / Fluid Container with Long Spout.

USD$ 11.80
Yamaha WR450F Piston Pin Puller
USD$ 17.00

Piston Pin Puller

#35-0090

Piston Pin Puller Fits Piston Sizes from 40mm (1 5/8") to 100mm (4") and Piston Pins From 12mm to 17mm Tool has 2 threaded steps 12mm and 17mm. Diameter of the rod that goes through the piston pin is 8.5mm..

USD$ 17.00
Yamaha WR450F Impact Driver Set
USD$ 16.25

Impact Driver Set

#35-0095

Impact Driver Set Heavy Duty Impact Driver With Slip Resistant Rubber Grip Comes with 6 Piece Bit Set & Case 1/2" Drive, Can also be used with 1/2" Drive Socket

USD$ 16.25
Yamaha WR450F 3/8" Drive Click Type Torque Wrench Tool
USD$ 36.20

3/8" Drive Click Type Torque Wrench Tool

#35-0099

3/8" Drive Window Click Type Torque Wrench Tool with Black Plastic Storage Case. 10-100Ft. Lbs. This click-style torque wrench easily tightens various automotive bolts, from lugs and crankshaft bolts to cylinder heads and engine-mountings. Measures from 10 to 100 foot/pounds in .5 increments.

USD$ 36.20
Yamaha WR450F Cylinder Stud Installation Tool Set
USD$ 9.60

Cylinder Stud Installation Tool Set

#35-0101

3 Piece Cylinder Stud Installation Tool Set. Installs studs without damaging the threads. Steel construction with black oxide finish for longer tool life. Includes M6 x 1.00, M8 x 1.25 and M10 x 1.25 stud installers. Hex head is 19mm.

USD$ 9.60
Yamaha WR450F Stud Extractor 1-6mm
USD$ 14.00
Out of Stock
Email Me When Available

Stud Extractor 1-6mm

#35-0102

Stud Extractor 1/4" Drive, used to remove seized or broken studs and bolts. Designed to fit into small areas, where studs may be hard to reach. Use with an impact wrench. Fits studs from (1-6mm)

USD$ 14.00
Out of Stock
Email Me When Available
Yamaha WR450F Stud Extractor 6-12mm
USD$ 18.45

Stud Extractor 6-12mm

#35-0103

Stud Extractor 3/8" Drive, used to remove seized or broken studs and bolts. Designed to fit into small areas, where studs may be hard to reach. Use with an impact wrench. Fits studs from (6-12mm)

USD$ 18.45
Yamaha WR450F Replacement Bit Set
USD$ 4.40

Replacement Bit Set

#35-0107

Replacement Bit Set 1 1/2" Standard Driver Bit Set Fits 35-0106 & 35-0095 Impact Drivers Contains 2 Phillips & 2 Slotted Bits

USD$ 4.40
Yamaha WR450F Replacement Bit Set
USD$ 4.40

Replacement Bit Set

#35-0110

Replacement Bit Set 3" Long Driver Bit Set Fits 35-0106 & 35-0095 Impact Drivers Contains 2 Phillips & 2 Slotted Bits

USD$ 4.40
Yamaha WR450F Snap Ring Plier Set
USD$ 10.30

Snap Ring Plier Set

#35-0114

Snap Ring Plier Set Removes Internal or External Snap Rings Includes 2 Straight & 2 Angled Tips

USD$ 10.30
Yamaha WR450F Valve Spring Compressor
USD$ 36.95

Valve Spring Compressor

#35-0115

Valve Spring Compressor Kit in a Plastic Storage Case. Includes adapter sizes 16mm, 19mm, 23mm, 25mm and 30mm.

USD$ 36.95
Yamaha WR450F Oil Filter Wrench
USD$ 8.85
Out of Stock
Email Me When Available

Oil Filter Wrench

#35-0121

Oil Filter Wrench Wafer-Thin For GL1500 Goldwings Also Works On Many other Honda/Yamaha/Kawasaki Models

USD$ 8.85
Out of Stock
Email Me When Available
Yamaha WR450F Safety Wire Pliers
USD$ 20.70
Out of Stock
Email Me When Available

Safety Wire Pliers

#35-0122

Safety Wire Pliers Standard Size With Return Spring Mechanism For Easy Wire Twisting

USD$ 20.70
Out of Stock
Email Me When Available
Yamaha WR450F Permatex Valve Lapping Paste
USD$ 11.05
Out of Stock
Email Me When Available

Permatex Valve Lapping Paste

#35-0124

Valve Lapping Paste - Permatex Aids valve grinding and seating operations to remove burrs, surface defects, carbon and corrosion. Mixes with water to form an easy to use paste.

USD$ 11.05
Out of Stock
Email Me When Available
Yamaha WR450F T-Handle Wrench
SALE: USD$ 3.95
(USD$ 4.40)
Out of Stock
Email Me When Available

T-Handle Wrench

#35-0131

T-Handle Wrench 5mm Allen

SALE: USD$ 3.95
(USD$ 4.40)
Out of Stock
Email Me When Available
Yamaha WR450F Valve Shim Tool
USD$ 9.60
Out of Stock
Email Me When Available

Valve Shim Tool

#35-1040

Valve Shim Tool Suz GS550/750/850/1000

USD$ 9.60
Out of Stock
Email Me When Available
Yamaha WR450F Valve Shim Tool
USD$ 9.60

Valve Shim Tool

#35-1041

Valve Shim Tool Honda CBX, CB750/900

USD$ 9.60
Yamaha WR450F Leakdown Tester
USD$ 87.30

Leakdown Tester

#35-1377

Leakdown Tester Dual Guage Tester Complete With 25" hose with Stepped adaptor One Dial Guage Reads 0-100PSI, Other Reads 0-100 Percent

USD$ 87.30
Yamaha WR450F Feeler Gauge Set
USD$ 3.65
Out of Stock
Email Me When Available

Feeler Gauge Set

#35-1766

Feeler Gauge Set 45 Degree Ends- Metric Feeler Gauge Set for setting valve clearances. 9pc. Set (marked in metric sizes only). 0.229mm. - (.009") 0.381mm. - (.015") 0.406mm. - (.016") 0.432mm. - (.017") 0.457mm. - (.018") 0.483mm. - (.019") 0.508mm. - (.020") 0.533mm. - (.021") 0.660mm. - (.026")

USD$ 3.65
Out of Stock
Email Me When Available
Yamaha WR450F Feeler Gauge Set
USD$ 5.55

Feeler Gauge Set

#35-1767

Feeler gauge set with 45 degree ends. Includes Sizes - .008", .010", .012", .013", .014", .015", .016", 018", .019", .020", .025", .026" Marked in Metric and Inch sizes.

USD$ 5.55
Yamaha WR450F Feeler Gauge Set
USD$ 7.05

Feeler Gauge Set

#35-1768

Feeler Gauge Set - Metric Feeler Gauge Set for setting valve and contact point clearances. 20pc Set (marked in metric sizes only). 0.05mm. - (.002") 0.55mm. - (0.22") 0.10mm. - (.004") 0.60mm. - (0.24") 0.15mm. - (.006") 0.65mm. - (0.26") 0.20mm. - (.008") 0.70mm. - (0.28") 0.25mm. - (.010") 0.75mm. - (0.30") 0.30mm. - (.012") 0.80mm. - (0.32") 0.35mm. - (.014") 0.85mm. - (0.34") 0.40mm. - (.016") 0.90mm. - (0.36") 0.45mm. - (.018") 0.95mm. - (0.38") 0.50mm. - (0.20") 1.00mm. - (0.40")

USD$ 7.05
Yamaha WR450F Feeler Gauge Set
USD$ 11.05

Feeler Gauge Set

#35-1769

Feeler Gauge Set - Metric/Inch Feeler Gauge Set for setting valve and contact point clearances. 32pc Set (marked in metric and inch sizes). 0.04mm. - (.0015") 0.05mm. - (.002") 0.06mm. - (.0025") 0.08mm. - (.003") 0.10mm. - (.004") 0.13mm. - (.005") 0.15mm. - (.006") 0.20mm. - (.008") 0.23mm. - (.009") 0.25mm. - (.010") 0.28mm. - (.011") 0.30mm. - (.012") 0.33mm. - (.013") 0.35mm. - (.014") 0.38mm. - (.015") 0.40mm. - (.016") 0.43mm. - (.017") 0.45mm. - (.018") 0.48mm. - (.019") 0.50mm. - (.020") 0.53mm. - (.021") 0.55mm. - (.022") 0.58mm. - (.023") 0.63mm. - (.025") 0.65mm. - (.026") 0.70mm. - (.028") 0.75mm. - (.030") 0.80mm. - (.032")

USD$ 11.05
Yamaha WR450F Graduated Cylinder
USD$ 6.60

Graduated Cylinder

#35-2210

250 ml Graduated Cylinder 250cc (1/4 Liter) plastic Graduated Cylinder for accurate measuring of fork oil and other fluids.

USD$ 6.60
Yamaha WR450F Graduated Cylinder
USD$ 7.35

Graduated Cylinder

#35-2211

500ml Graduated Cylinder 500cc (1/2 Liter) plastic Graduated Cylinder for accurate measuring of fork oils and other fluids.

USD$ 7.35
Yamaha WR450F Graduated Cylinder
USD$ 8.10

Graduated Cylinder

#35-2212

Graduated Cylinder 1,000cc (1 Liter) plastic Graduated Cylinder for accurate measuring of fluids. 1 US Quart = 946cc (946ml.)

USD$ 8.10
Yamaha WR450F Tappet Adjuster Tool Set
USD$ 9.60

Tappet Adjuster Tool Set

#35-3040

Tappet Adjuster Tool Set Small 4 Stroke Engines Includes 8mm, 9mm, 10mm Sockets 1 Adjuster 1/8" (3mm) Square Size

USD$ 9.60
Yamaha WR450F Tappet Adjusting Tool Set
USD$ 22.15

Tappet Adjusting Tool Set

#35-4200

Tappet Adjusting Tool Set 6 Piece Set Includes T-Socket Wrenches - 8mm, 9mm, 10mm Sizes 3 Adjusters - Slotted Screw, 3mm Square, 4mm Square

USD$ 22.15
Yamaha WR450F Tappet T-Socket Wrench
USD$ 3.65

Tappet T-Socket Wrench

#35-4209

Tappet T-Socket Wrench 9mm

USD$ 3.65
Yamaha WR450F Tappet T-Socket Wrench
USD$ 3.65
Out of Stock
Email Me When Available

Tappet T-Socket Wrench

#35-4210

Tappet T-Socket Wrench 10mm

USD$ 3.65
Out of Stock
Email Me When Available
Yamaha WR450F Tappet Adjuster
USD$ 2.60

Tappet Adjuster

#35-4211

Tappet Adjuster Slotted Screw Type

USD$ 2.60
Yamaha WR450F Tappet Adjuster
USD$ 2.60

Tappet Adjuster

#35-4213

Tappet Adjuster 3mm Square

USD$ 2.60
Yamaha WR450F Tappet Adjuster
USD$ 2.90

Tappet Adjuster

#35-4214

Tappet Adjuster 4mm (3.5mm) Square

USD$ 2.90
Yamaha WR450F Seal Puller
USD$ 11.05

Seal Puller

#35-8000

Seal Puller for Large Size Seals.

USD$ 11.05
Yamaha WR450F Scraper Knife
USD$ 6.30

Scraper Knife

#35-8002

Scraper Knife 15mm Stainless Steel

USD$ 6.30
Yamaha WR450F Scraper Knife
USD$ 6.30

Scraper Knife

#35-8003

Scraper Knife 20mm Stainless Steel

USD$ 6.30
Yamaha WR450F Blind Hole Bearing Puller Set
USD$ 103.55

Blind Hole Bearing Puller Set

#35-8010

Blind Hole Bearing Puller Set Includes 2.15LB Slide Hammer With Shaft & 8 Pc Of Bearing Collets. Pulls The Following Size Bearings: 8-10mm, 10-12mm, 12-14mm, 15-17mm, 17-20mm, 20-24mm, 25-29mm, 30-32mm

USD$ 103.55
Yamaha WR450F Metal Funnel
USD$ 7.05
Out of Stock
Email Me When Available

Metal Funnel

#35-8040

Metal Funnel Comes With 14" Flexible/Detachable Metal Nozzle

USD$ 7.05
Out of Stock
Email Me When Available
Yamaha WR450F Timing Light
USD$ 31.80

Timing Light

#35-9000

Timing Light Inductive Xenon Timing Light Operates From 12 Volt Battery

USD$ 31.80
Yamaha WR450F Spin On Oil Filter Wrench
USD$ 8.10

Spin On Oil Filter Wrench

#35-9022

Spin On Oil Filter Wrench Removes 63-98mm In Diameter - 3/8" Drive

USD$ 8.10
Yamaha WR450F Mechanics Stethoscope
USD$ 9.60

Mechanics Stethoscope

#35-9028

Mechanics Stethoscope

USD$ 9.60
Yamaha WR450F Compression Tester
USD$ 51.75

Compression Tester

#35-9030

Compression Tester Includes Adaptors to Fit 10mm, 12mm, 14mm & 18mm Plug Holes

USD$ 51.75
Yamaha WR450F Flexible Magnet
USD$ 8.85
Out of Stock
Email Me When Available

Flexible Magnet

#35-9036

Flexible Magnet 23" Long Flex Rod With Magnetic Tip Lifts Up To 3.5Lbs

USD$ 8.85
Out of Stock
Email Me When Available
Yamaha WR450F Clutch Holding Tool
USD$ 22.15

Clutch Holding Tool

#35-9052

Clutch Holding Tool Adjustable Vise Grip Style Clutch Basket & Sprocket Holder Tool

USD$ 22.15
Yamaha WR450F Image Scope
SALE: USD$ 59.95
(USD$ 102.85)

Image Scope

#35-9096

Professional Flexible Fiber Optic Image Scope for inspecting engine internal parts. 18" long wand with a 6mm (1/4") OD tip. Image resolution is 7,400 pixels. Packed in a blow mold case with handle jacket and extra Xenon Bulbs and 2 AA batteries.

SALE: USD$ 59.95
(USD$ 102.85)
The names Honda, Yamaha, Kawasaki, Suzuki and any other trade names or symbols belonging to each respective corporation are stated for reference purposes only. The products on this site are after market (not OEM) replacement parts and accessories only. We have no relationship to the listed companies.