HondaCB550K ► 

Refine Search Results
Honda CB550K Carburetor Stabilizer Bracket
USD$ 36.20
Listed Models

Carburetor Stabilizer Bracket

#29-0540 | Honda CB550K (1974-1976)

Carburetor Stabilizer Bracket. These high quality made in Canada stainless steel brackets stabilize the carburetors when the air box is removed. A must have for pods or hard tails!

USD$ 36.20
Listed Models
Honda CB550K Carb Float Setting Tool
USD$ 10.30
Listed Models

Carb Float Setting Tool

#73-0888 | Honda CB550K (1974-1976)

Carb Float Setting Tool. Use this tool to help set your floats with ease! This pre-set float setting gauge is for the models/years below only. Fits: Honda CB500K (1971-73), CB550K (1974-76), CB550F (1975-77) Supersport

USD$ 10.30
Listed Models
Honda CB550K Carb Float Level Gauge
USD$ 14.75

Carb Float Level Gauge

#35-0043

Carburetor Float Level Gauge. Used to measure the float height between the float and carburetor gasket surface. It is important to make sure the float height is correct to factory spec when tuning your engine. Too little or too much fuel in the float bowl will negatively affect tuning results. Adjustable to fit most carburetors. Adjustable Width: 16-78mm and Adjustable Height 0-40mm

USD$ 14.75
Honda CB550K Hose Remover Pliers
USD$ 9.60

Hose Remover Pliers

#35-0049

Hose Remover Pliers. For easy removal of 5/32" to 1/2" hoses. The jaw digs into the tube to grip it, squeeze and the hose is easily pushed off by the jaw.

USD$ 9.60
Honda CB550K 382pc O-Rings Kit with Plastic Case
USD$ 18.45

382pc O-Rings Kit with Plastic Case

#35-0066

382pc O-Rings Kit with Plastic Case. 30 different sizes included in mm's. QTY---Width----Inside Dia.---------QTY---Width-----Inside Dia. 20X---1.78mm--2.90mm------------13X---2.62mm--9.19mm 20X---1.78mm--3.69mm------------13X---2.62mm--10.77mm 20X---1.78mm--4.47mm------------13X---2.62mm--12.37mm 20X---1.78mm--5.29mm------------13X---2.62mm--13.95mm 20X---1.78mm--6.07mm------------13X---2.62mm--15.54mm 20X---1.78mm--7.65mm------------13X---2.62mm--17.12mm 20X---1.78mm--9.25mm------------13X---2.62mm--18.72mm 10X---3.53mm--18.64mm----------10X---3.53mm--31.34mm 10X---3.53mm--20.22mm----------10X---3.53mm--32.92mm 10X---3.53mm--21.82mm----------10X---3.53mm--34.52mm 10X---3.53mm--23.39mm----------10X---3.53mm--36.10mm 10X---3.53mm--25.00mm----------10X---3.53mm--37.70mm 10X---3.53mm--26.57mm------------7X---5.34mm--37.47mm 10X---3.53mm--28.17mm------------7X---5.34mm--40.65mm 10X---3.53mm--29.75mm------------7X---5.34mm--43.82mm

USD$ 18.45
Honda CB550K 419pc O-Rings Kit with Plastic Case
USD$ 20.70

419pc O-Rings Kit with Plastic Case

#35-0067

419pc O-Rings Kit with Plastic Case. 32 different sizes included metric sizes. QTY---Width----Inside Dia.---------QTY---Width-----Inside Dia. 20X---1.50mm--3.00mm------------13X---2.50mm--11.00mm 23X---1.50mm--7.00mm------------14X---2.50mm--13.00mm 23X---1.50mm--10.0mm------------13X---2.50mm--14.00mm 23X---1.50mm--13.0mm------------14X---2.50mm--16.00mm 20X---2.00mm--4.40mm------------14X---2.50mm--18.00mm 18X---2.00mm--5.00mm------------13X---2.50mm--19.00mm 14X---2.50mm--10.0mm------------14X---2.50mm--21.00mm 13X---2.50mm--22.00mm----------10X---3.50mm--31.00mm 10X---3.50mm--18.00mm----------10X---3.50mm--33.00mm 10X---3.50mm--20.00mm----------10X---3.50mm--34.50mm 10X---3.50mm--22.00mm----------10X---3.50mm--36.00mm 10X---3.50mm--23.50mm----------10X---3.50mm--38.00mm 10X---3.50mm--25.00mm----------10X---3.50mm--41.00mm 10X---3.50mm--26.50mm----------10X---3.50mm--44.00mm 10X---3.50mm--28.00mm----------10X---3.50mm--47.00mm 10X---3.50mm--30.00mm----------10X---3.50mm--50.00mm

USD$ 20.70
Honda CB550K Carburetor Adjusting Tool
USD$ 14.00

Carburetor Adjusting Tool

#35-0084

Carburetor Adjusting Tool. Works with Mikuni or Keihin carbs. 11" long tool with a 8mm hex nut and screwdriver slot adjusting bolt. This combo design allows unlocking of the locknut, adjustments to the balancing screw and re-locking the lock nut in one step.

USD$ 14.00
Honda CB550K Carburetor Synchronizer Vacuum Gauge ~ 2,3,4 Cylinders
USD$ 62.85

Carburetor Synchronizer Vacuum Gauge ~ 2,3,4 Cylinders

#35-0085

Carburetor and throttle body synchronizer kit for bikes with 2, 3 or 4 Cylinders. Makes synching your carburetor setup fast and easy! For use with Honda, Kawasaki, and Suzuki models (which typically have 5mm connections) that use sets of 2, 3 or 4 cylinders. Includes 4 easy to read gauges, Mountable bracket, 180mm extensions - 5mm threads, 65mm extensions - 5mm threads,Necessary hoses, Dampening valves (included to help control needle jump) and instructions.

USD$ 62.85
Honda CB550K Carb Cleaning Tool Set
USD$ 8.10

Carb Cleaning Tool Set

#35-9110

Carburetor Cleaning Tool Set. Includes 20 steel wire ends designed for cleaning the tiny holes found in carburetor jets. Cleaning wire sizes range from 0.45mm to 1.5mm.

USD$ 8.10
Honda CB550K Fluid Hose Clamp
USD$ 5.55

Fluid Hose Clamp

#35-9117

Fluid Hose Clamp, all steel construction with adjustable locking collar. Completely or partially closes flexible brake, fuel, and vacuum fluid lines.

USD$ 5.55
Honda CB550K Portable Auxiliary Fuel Tank Tool
USD$ 36.95

Portable Auxiliary Fuel Tank Tool

#35-9120

Portable Auxiliary Fuel Tank, for Non Fuel Injection Systems. Includes 4 Feet of 1/4" fuel line and an inline fuel valve with 1/4" inlet and outlet. Fuel capacity 2 Litres. For use when tuning a motorcycle with the gas tank removed. Note: This tool is not to be used for long term fuel storage, for safety and to prevent accidental spillage, immediately drain gas back to approved long term storage container after use.

USD$ 36.95
Honda CB550K Carb Cleaning Tool Set
USD$ 8.85

Carb Cleaning Tool Set

#35-9125

Carburetor Cleaning Tool Set. Includes 12 steel wire ends and a small file designed for cleaning nozzles and the tiny holes found in carburetor passages and jets.

USD$ 8.85
Honda CB550K Carburetor Synchronizer Vacuum Gauge ~ 2 Carb Synchronizer
USD$ 36.95

Carburetor Synchronizer Vacuum Gauge ~ 2 Carb Synchronizer

#37-0003

Carburetor and throttle body synchronizer kit for bikes with 2 Carbs. Makes synching your carburetor setup fast and easy! For use with Honda, Kawasaki, and Suzuki models (which typically have 5mm connections) that use sets of 2 carbs. Includes 2 easy to read gauges, Mountable bracket, 180mm extensions - 5mm threads, 65mm extensions - 5mm threads,Necessary hoses, Dampening valves (included to help control needle jump) and instructions.

USD$ 36.95
The names Honda, Yamaha, Kawasaki, Suzuki and any other trade names or symbols belonging to each respective corporation are stated for reference purposes only. The products on this site are after market (not OEM) replacement parts and accessories only. We have no relationship to the listed companies.